LIVVkit: An extensible, python-based, land ice verification and validation toolkit for ice sheet models
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Not Available
An energy-conserving and an energy-and-enstrophy conserving numerical schemes are derived by approximating the Hamiltonian formulation of the inviscid shallow water flows based on the vorticity-divergence variables. These schemes also conserve the first-order moments such as mass and vorticity, as usual. The conservative properties of the schemes stem from the skew-symmetry and singularities of the Poisson brackets, which are carefully retained in the discrete approximations. Here, the schemes operate on unstructured orthogonal dual meshes, over bounded or unbounded domains, and they are also shown to possess the same optimal dispersive wave relations as those of the Z-grid scheme, which is a consequence of the use of the vorticity and divergence variables.
Not Available
Not Available
In this paper, we propose a multi-fidelity system reduction technique that uses weighted graphs paired with three-dimensional discrete fracture network (DFN) modelling for efficient simulation of subsurface flow and transport in fractured media. DFN models are used to simulate flow and transport in subsurface fractured rock with low-permeability. One method to alleviate the heavy computational overhead associated with these simulations is to reduce the size of the DFN using a graph representation of it to identify the primary flow sub-network and only simulate flow and transport thereon. The first of these methods used unweighted graphs constructed solely on DFN topology and could be used for accurate predictions of first-passage times. However, these techniques perform poorly when predicting later stages of the mass breakthrough. We utilize a weighted-graph representation of the DFN where edge weights are based on hydrological parameters in the DFN that allows us to exploit the kinematic quantities derivable a posteriori from the flow solution obtained on the graph representation of the DFN to perform system reduction and predict the later stages of the breakthrough curve with high fidelity. We also propose and demonstrate the use of an adaptive pruning algorithm with error control that produces a pruned DFN sub-network whose predicted mass breakthrough agrees with the original DFN within a user-specified tolerance. Lastly, the method allows for the level of accuracy to be a user-controlled parameter.
Explore the source record for details and available documents.
We focus on the fully implicit solution of the linear systems arising from a three-field mixed finite element approximation of Biot’s poroleasticity equations. The objective is to develop algebraic block preconditioners for the efficient solution of such systems by Krylov subspace methods. In this work, we investigate the use of approximate inverse-based techniques to decouple the native system of equations and obtain explicit sparse approximations of the Schur complements related to the physics-based partitioning of the unknowns by field type. Here, the proposed methods are tested in various numerical experiments including real-world applications dealing with petroleum and geotechnical engineering.
A new energy and enstrophy conserving scheme (EEC) for the shallow water equations is proposed and evaluated using a suite of test cases over the global spherical or bounded domain. The evaluation is organized around a set of pre-defined properties: accuracy of individual operators, accuracy of the whole scheme, conservation of key quantities, control of the divergence variable, representation of the energy and enstrophy spectra, and simulation of nonlinear dynamics. The results confirm that the scheme is between the first and second order accurate, and conserves the total energy and potential enstrophy up to the time truncation errors. Here, the scheme is capable of producing more physically realistic energy and enstrophy spectra, indicating that it can help prevent the unphysical energy cascade towards the finest resolvable scales. With an optimal representation of the dispersive wave relations, the scheme is able to keep the flow close to being non-divergent, and maintain the geostrophically balanced structures with large-scale geophysical flows over long-term simulations.
We present a set of multiphase flow simulations where supercritical CO 2 (scCO 2 ) displaces water at hydrostatic conditions within three-dimensional discrete fracture networks that represent paths for potential leakage through caprock above CO 2 storage reservoirs. The simulations are performed to characterize and compare the relative impact of hydraulic and structural heterogeneity in fractured media on the initial movement of scCO 2 through these caprock formations. In one scenario, intrinsic fracture permeabilities are varied stochastically within a fixed network structure. In another scenario, we generate multiple independent, identically distributed network realizations with varying fracture network densities to explore a wide range of geometric and topological configurations. Analysis of the simulations indicates that network structure, specifically connectivity and the presence of hanging fractures, plays a larger role in controlling the displacement of water by scCO 2 than variations in local hydraulic properties. Finally, we identify active surface area of the network as a single-phase feature that could provide a lower bound on the percentage of the network surface area reached by scCO 2 .
We develop a new approach for solving the nonlinear Richards’ equation arising in variably saturated flow modeling. The growing complexity of geometric models for simulation of subsurface flows leads to the necessity of using unstructured meshes and advanced discretization methods. Typically, a numerical solution is obtained by first discretizing PDEs and then solving the resulting system of nonlinear discrete equations with a Newton-Raphson-type method. Efficiency and robustness of the existing solvers rely on many factors, including an empiric quality control of intermediate iterates, complexity of the employed discretization method and a customized preconditioner. We propose and analyze a new preconditioning strategy that is based on a stable discretization of the continuum Jacobian. We will show with numerical experiments for challenging problems in subsurface hydrology that this new preconditioner improves convergence of the existing Jacobian-free solvers 3-20 times. Furthermore, we show that the Picard method with this preconditioner becomes a more efficient nonlinear solver than a few widely used Jacobian-free solvers.
The Material Point Method (MPM) has been increasingly used to simulate large strain deformations. Linear interpolation functions are commonly used to perform the spatial integration. It is well-known that the discontinuities in the interpolation function derivatives induce shock-like artifacts known as ‘cell-crossing’ error. These errors compound with volumetric locking errors when used with hydromechanical formulations for porous media, where different velocity fields are used for each phase. The capabilities of higher-order MPM frameworks have not been explored for real-scale geotechnical problems. As such, this paper aims to assess, validate, and further discuss a higher-order B-spline MPM (BS-MPM) framework. First, the BS-MPM framework is verified against the large-strain oedometer consolidation problem. Second, the framework is validated against a real-scale slope failure experiment triggered by pore water pressure recharge. Landslide features that are captured using the higher-order framework are specifically highlighted, and results (e.g., pore water pressure and deformation) are validated with field measurements. A generally convergent numerical solution is observed when using cubic interpolation functions. Third, a footing penetration problem is simulated using the multi-patch BS-MPM. Trends are examined with respect to penetration velocity and variation in hydraulic conductivity. The BS-MPM framework ultimately presents a stabilized numerical solution that captures plausible hydromechanical interaction trends important in geotechnical engineering applications.
Large-scale implementation of geologic carbon storage (GCS) to help reduce atmospheric greenhouse gas emissions requires stakeholder confidence that injected CO2 will remain contained and that potential subsurface environmental risks are acceptably small and manageable. The U.S. Department of Energy’s National Risk Assessment Partnership (NRAP) has developed an open-source integrated assessment model (NRAP-Open-IAM) to help address questions about a potential GCS site’s ability to effectively contain injected CO 2 and protect groundwater and other overlying environmentally sensitive receptors. NRAP-Open-IAM allows a user to: (1) incorporate relevant site geologic and injection scenario data; (2) characterize important site features and events;(3) couple fast prediction models of various system components of the engineered geologic system; and (4) execute stochastic, dynamic simulation of whole GCS system performance, leakage risk assessment, and uncertainty quantification. NRAP-Open-IAM is available on GitLab (https://gitlab.com/NRAP/OpenIAM), and is accompanied by multiple application examples and detailed user and developer guides.
A recently introduced multiscale model for representing the effects of small-scale hyporheic-zone biogeochemical processes is extended from the reach scale to river network scales. The model uses advection-dispersion-reaction equations for the channel network and one-dimensional advection-reaction subgrid models for the hyporheic zone. We summarize implementation in the integrated surface/subsurface hydrology modeling system Amanzi-ATS. The extension uses topologically defined meshes to represent stream/river networks and associates a hyporheic subgrid model with each channel grid cell. Biogeochemical reaction modeling capability residing in community software is accessed through an application programming interface. The implementation is verified against independent numerical solutions on a single reach. Mesh convergence studies show that commonly used semi-distributed representations can introduce significant spatial discretization error. Denitrification of farm runoff in a subbasin of the Portage River Basin in Ohio, USA is used to demonstrate the general-purpose reactive transport capability.
Not Available
The scale-dependence of geochemical reaction rates hinders their use in continuum scale models intended for the interpretation and prediction of chemical fate and transport in subsurface environments such as those considered for geologic sequestration of CO 2 . Processes that take place at the pore scale, especially those involving mass transport limitations to reactive surfaces, may contribute to the discrepancy commonly observed between laboratory-determined and continuum-scale or field rates. In this study we investigate the dependence of mineral dissolution rates on the pore structure of the porous media by means of pore scale modeling of flow and multicomponent reactive transport. The pore scale model is composed of high-performance simulation tools and algorithms for incompressible flow and conservative transport combined with a general-purpose multicomponent geochemical reaction code. The model performs direct numerical simulation of reactive transport based on an operator-splitting approach to coupling transport and reactions. The approach is validated with a Poiseuille flow single-pore experiment and verified with an equivalent 1-D continuum-scale model of a capillary tube packed with calcite spheres. Using the case of calcite dissolution as an example, the high-resolution model is used to demonstrate that nonuniformity in the flow field at the pore scale has the effect of decreasing the overall reactivity of the system, even when systems with identical reactive surface area are considered. In conclusion, the effect becomes more pronounced as the heterogeneity of the reactive grain packing increases, particularly where the flow slows sufficiently such that the solution approaches equilibrium locally and the average rate becomes transport-limited.
Discrete fracture network (DFN) models are a powerful alternative to continuum models for subsurface flow and transport simulations because they explicitly include fracture geometry and network topology, thereby allowing for better characterization of the latter's influence on flow and transport through fractured media. Recent advances in high performance computing have opened the door for flow and transport simulations in large explicit three-dimensional DFN, but this increase in model fidelity and system size comes at a huge computational cost because of the large number of mesh elements required to represent thousands of fractures (with sizes that can range several orders of magnitude, from mm to km). In most subsurface applications, fracture characteristics are only known statistically and numerous realizations are needed to bound uncertainty in flow and transport in the system, thereby exacerbating the computational burden. blackGraphs provide a simple and elegant way to characterize, query, and interrogate fracture network connectivity. We propose a DFN model reduction framework where various graph-representations are used in conjunction with high-fidelity DFN simulations to increase computational efficiency while retaining accuracy of key quantities of interest. The appropriate choice of a graph-representation, namely, which attributes of the DFN are to be represented as nodes and which ones as edges connecting those nodes, depends on the relevant scientific questions. We demonstrate that the proposed DFN model reduction framework provides an efficient means for DFN modeling through both system reduction of the DFN using graph-based properties and combining DFN and graph-based flow and transport simulations.
Preindustrial control simulations with the third Hadley Centre Global Environmental Model,run in the Global Coupled configuration 3.1 of the Met Office Unified Model (HadGEM3-GC3.1) are presentedat two resolutions. These are N216ORCA025, which has a horizontal resolution of 60 km in the atmosphereand 0.25° in the ocean, and N96ORCA1, which has a horizontal resolution of 130 km in the atmosphereand 1° in the ocean. The aim of this study is to document the climate variability in these simulations, makecomparisons against present-day observations (albeit under different forcing), and discuss differencesarising due to resolution. In terms of interannual variability in the leading modes of climate variability thetwo resolutions behave generally very similarly. Notable differences are in the westward extent of El Niñoand the pattern of Atlantic multidecadal variability, in which N216ORCA025 compares more favorably toobservations, and in the Antarctic Circumpolar Current, which is far too weak in N216ORCA025. In the NorthAtlantic region, N216ORCA025 has a stronger and deeper Atlantic Meridional Overturning Circulation, whichcompares well against observations, and reduced biases in temperature and salinity in the North Atlanticsubpolar gyre. These simulations are being provided to the sixth Coupled Model Intercomparison Project(CMIP6) and provide a baseline against which further forced experiments may be assessed.