SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High power-density, self-regulating fuel cell develops electrical power from catalyzed reaction between methanol and atmospheric oxygen. Cells such as these are of particular interest, because they may one day offer an emission-free, extremely efficient alternative to internal-combustion engines as power source.
Producing scalable, economically viable, low-carbon biofuels or biochemicals hinges on more efficient bioconversion processes. While microbial conversion can offer robust solutions, the native microbial growth process often redirects a large fraction of carbon to CO 2 and cell mass. By integrating genome-scale metabolic models with techno-economic and life cycle assessment models, this study analyzes the effects of converting cell mass lipids to hydrocarbon fuels, and CO 2 to methanol on the facility’s costs and life-cycle carbon footprint. Results show that upgrading microbial lipids or both microbial lipids and CO 2 using renewable hydrogen produces carbon-negative bisabolene. Additionally, on-site electrolytic hydrogen production offers a supply of pure oxygen to use in place of air for bioconversion and fuel combustion in the boiler. To reach cost parity with conventional jet fuel, renewable hydrogen needs to be produced at less than $\$2.2$ to $\$3.1$/kg, with a bisabolene yield of 80% of the theoretical yield, along with cell mass and CO 2 yields of 22 wt% and 54 wt%, respectively. The economic combination of cell mass, CO 2 , and bisabolene yields demonstrated in this study provides practical insights for prioritizing research, selecting suitable hosts, and determining necessary engineered production levels.
Projections are made for the demand and supply of hydrogen as chemical feedstock in USA. Industrial sectors considered are petroleum refining, ammonia synthesis, methanol production, isocyanate manufacture, edible oil processing, coal liquefaction, fuel cell electricity generation, and direct iron reduction. Presently, almost all the hydrogen required is produced by reforming of natural gas or petroleum fractions. Specific needs and emphases are recommended for future research and development to produce hydrogen from other sources to meet the requirements of these industrial sectors. The data and the recommendations summarized in this paper are based on the Workshop 'Supply and Demand of Hydrogen as Chemical Feedstock' held at the University of Houston on December 12-14, 1977.
Test results are given for a 5 kW stack and initial results for an integrated, grid connected system operating from methanol fuel. Site selection criteria are presented for future demonstration of a 50 or 100 kW OS/IES. Preliminary results are also given with approximate internal rates of return to the building owner. Progress in development and construction of a 50 kW modular methanol/steam reformer is reported.
Metal supported solid oxide fuel cells (MS-SOFC) are integrated with internal reforming catalyst for direct utilization of ethanol to generate electricity. MS-SOFCs are operated up to 500 h at 700°C, with water-ethanol blend fuel using high-purity ethanol and denatured ethanol. Performance and durability with denatured ethanol varies dramatically with the composition of the denaturant. Cells operated with three denatured ethanol fuels containing small amount of methanol, isopropanol, and denatonium benzoate demonstrate similar and relative stable performance after stabilization, suggesting that these fuels are fit for MS-SOFC operation. No or minimum carbon deposits are observed on the high entropy alloy-based reforming catalyst layer. Denatured ethanol containing gasoline and toluene leads to fast degradation. Here, MS-SOFCs are promising for direct utilization of denatured ethanol, offering a path to rapid-start, carbon-neutral operation with widely-available fuels.
Investigating multicomponent transport in dense, hydrated polymer membranes is necessary in applications such as fuel cells, electrolyzers, and desalination systems. Of particular interest are photoelectrochemical CO 2 reduction cells (PEC-CRC) which produce liquid products such as alcohols (methanol) and carboxylates (formate, acetate). Flux coupling and competitive sorption behavior of these products (solutes) have been found to affect permselectivity, thereby motivating us to investigate fundamental membrane structure-physicochemical-transport relationships. Past research has shown that systematic tuning of crosslinked cation exchange membranes (CEMs) with charge-neutral monoacrylate monomers containing alkyl and phenyl groups (i.e., poly(ethylene glycol) methacrylate (PEGMA), and poly(ethylene glycol) phenyl ether acrylate (PEGPEA)) can suppress acetate transport (permeability) in co-permeation with methanol. To further investigate this transport behavior and to enhance membrane ionic conductivities, 3-sulfopropyl methacrylate potassium (SPMAK), a sulfonated monoacrylate monomer is incorporated here. SPMAK content is varied with neutral PEGPEA and diacrylate crosslinker, poly (ethylene glycol) diacrylate (PEGDA) of two different chain lengths (n = 10 and 13) to prepare membranes of various compositions. Electrochemical and physicochemical properties including ionic conductivity, ion exchange capacity, and water uptake increase with increasing charged SPMAK content. Different states of water within hydrated membranes are probed using differential scanning calorimetry (DSC), where increasing intermediate (loosely bound) water is observed with increasing hydrophilic SPMAK content. The transport behavior of methanol and carboxylates (formate, acetate, propionate) are investigated, where permeabilities vary as methanol > formate > acetate ≈ propionate. Interestingly, permeabilities decrease with increasing PEGPEA content and are more dependent on solute diffusion than sorption. Permeabilities and diffusivities decrease while permselectivities increase with decreasing PEGDA chain length.
Recognizing the potential role of liquid hydrogen carriers in overcoming the inherent limitations in transporting and storing gaseous and liquid hydrogen, a complete production and use scenario is postulated and analyzed for perspective one-way and two-way carriers. The carriers, methanol, ammonia and toluene/MCH (methylcyclohexane), are produced at commercially viable scales in a central location, transmitted by rail or pipelines for 2000 miles, and decomposed near city gates to generate fuel-cell quality hydrogen for distribution to refueling stations. In terms of the levelized cost of H 2 distributed to the stations, methanol is less expensive to produce (1.22 dollars per kg-H 2 ) than MCH (1.35 dollars per kg-H 2 ) or ammonia (2.20 dollars per kg-H 2 ). Levelized train transmission cost is smaller for methanol (0.63 dollars per kg-H 2 ) than ammonia (1.29 dollars per kg-H 2 ) or toluene/MCH system (2.07 dollars per kg-H 2 ). Levelized decomposition cost is smaller for ammonia (0.30-1.06 dollars per kg-H 2 ) than MCH (0.54-1.22 dollars per kg-H 2 ) or methanol (0.43-1.12 dollars per kg-H 2 ). Over the complete range of demand investigated, 10-350 tpd-H 2 , the levelized cost of H2 distributed to stations is aligned as methanol « ammonia ~ MCH. With pipelines at much larger scale, 6000 tpd-H 2 , the levelized cost decreases by ~1 dollar per kg-H 2 for ammonia and MCH and much less for methanol. Methanol is a particularly attractive low-risk carrier in the transition phase with lower than 50-tpd H 2 demand.
The development of a commercially viable and cost-effective phospheric acid fuel cell powered on-site integrated energy system (OS/IES) is described. The fuel cell offers energy efficients in the range of 35-40% of the higher heating value of available fuels in the form of electrical energy. In addition, by utilizing the thermal energy generated for heating, ventilating and air-conditioning (HVAC), a fuel cell OS/IES could provide total energy efficiencies in the neighborhood of 80%. Also, the Engelhard fuel cell OS/IES offers the important incentive of replacing imported oil with domestically produced methanol, including coal-derived methanol.
Operating experience with a 5kW methanol-air integrated system is described. On-going test results for a 24-cell, two-sq ft (4kW) stack are reported. The main activity for this stack is currently the evaluation of developmental non-metalic cooling plates. Single-cell test results are presented for a promising developmental cathode catalyst.
Objectives: 1) To design and synthesize water soluble transition metal complexes that function as electrocatalysts for the reduction of water to hydrogen or carbon dioxide to formate 2) To experimentally measure thermochemical properties, such as hydride donor ability, and use these quantities to optimize catalyst performance in solutions of varying pH 3) To incorporate results from detailed mechanistic and kinetic studies to direct improvements in catalyst design 4) To use thermochemical data from objective 2 to generate predictive models for the properties of new complexes to apply to the development of catalysts for other reductive reactions, with an emphasis on carbon dioxide reduction to methanol Description: Wide-spread implementation of renewable but intermittent energy sources, such as solar, requires the development of efficient methods for energy storage. The high energy density of chemical bonds makes chemical fuels an ideal solution for energy storage. Hydrogen and reduced carbon compounds have been proposed as ideal candidates for chemical fuels. However, the generation of chemical fuels from electricity requires competent electrocatalysts. The proposed research focuses on developing electrocatalysts for the reduction of water to hydrogen, and carbon dioxide to formate. Both products can be used directly as an energy carrier in fuel cells, or as a reductant for more saturated chemical fuels. Hydrogen is the most common fuel used in current commercial fuel cells. Additionally, there is interest in formic acid as a liquid carrier for hydrogen because of its increased storage density and ease of dehydrogenation. Formate is also an intermediate in the sequential reduction of CO 2 to methanol, another potential chemical fuel with high energy storage density. Despite the utility of formate as a chemical fuel or precursor, there are very few examples of electrocatalysts for its production from CO 2 , and even fewer demonstrate high product selectivity. In heterogeneous catalysis, the Sabatier principle is used to generate volcano curves that describe optimal thermochemical properties for key intermediates that result in peak catalytic activity. In most cases, such as hydrogen production and oxidation, the most favorable metals (Pt, Re, Rh, and Ir) are rare and expensive. Molecular inorganic complexes provide an opportunity to use electronic and steric ligand effects to tune the critical thermodynamic parameters of abundant metals to values comparable to key surface intermediates on precious metals. This principle will be applied to the design of aqueous homogeneous catalysts for the reduction of H 2 O and CO 2 optimized to function at specific pH ranges. The critical intermediate in both of these reactions is a metal hydride. The strength of this bond, or hydricity (ΔGH - ) dictates the overall thermodynamics of the reduction of H + to H 2 and the sequential reduction of C1 substrates, such as CO 2 , CO, and H 2 CO (the latter to CH 3 OH). ΔGH - will be systematically measured for a series of first row metal complexes to form predictive models for metal and ligand electronic effects. Benefits and Outcomes: This approach addresses thermodynamic requirements essential for energy-efficient catalyst design and transition state barrier considerations for faster catalysis. The advancements made from this research will include the discovery of efficient, stable, and fast catalysts for hydrogen and formate generation from electricity. The ability to store energy efficiently is critical to the widespread use of renewable energy schemes. This provides a viable solution to produce high energy density fuels for stationary and mobile energy applications. The fundamental research conducted is also directly applicable to the design of catalysts for the generation of further reduced products such as methanol.
Significance Direct ethanol fuel cells are attracting growing attention as portable power sources due to their advantages such as higher mass-energy density than hydrogen and less toxicity than methanol. However, it is challenging to achieve the complete electrooxidation to generate 12 electrons per ethanol, resulting in a low fuel utilization efficiency. This manuscript reports the complete ethanol electrooxidation by engineering efficient catalysts via single-atom modification. The combined electrochemical measurements, in situ characterization, and density functional theory calculations unravel synergistic effects of single Rh atoms and Pt nanocubes and identify reaction pathways leading to the selective C–C bond cleavage to oxidize ethanol to CO 2 . This study provides a unique single-atom approach to tune the activity and selectivity toward complicated electrocatalytic reactions.
This study focuses on analysis of a 12-bed vacuum pressure-swing adsorption (VPSA) process capable of purifying hydrogen from a ternary mixture (H 2 /CO 2 /CO 75/24/1 mol%) derived from methanol-steam reforming. The process produces 9 kmol H 2 /h with less than 2 ppm and 0.2 ppm of CO2 and CO, respectively, to supply a polymer electrolyte membrane fuel cell. The process model is developed in Aspen Adsorption® using the “uni-bed” approach. A parametric study of H 2 purity and recovery with respect to adsorption pressure, adsorbent height, activated carbon:zeolite ratio, feed composition, and number of beds is performed. Results show 12-bed VPSA can meet the H 2 purity goals, with H 2 recovery as high as 75.75%. Adsorption occurs at 7 bar, the column height is 1.2 m, and the adsorbent ratio is 70%:30%. Furthermore, a 4-bed VPSA can achieve the same purity goals as the 12-bed process, but H 2 recovery decreases to 61.34%.
An analyte concentration sensor that is capable of fast and reliable sensing of analyte concentration in aqueous environments with high concentrations of the analyte. Preferably, the present invention is a methanol concentration sensor device coupled to a fuel metering control system for use in a liquid direct-feed fuel cell.
One of the goals of NASA's HEDS enterprise is to establish a long-term human presence on Mars at a fraction of the cost of employing today's technology. The most direct method of reducing mission cost is to reduce the launch mass of the spacecraft. If the propellants for the return phase of the mission are produced on Mars, the total spacecraft mass could be reduced significantly. An interim goal is a Mars Sample Return (MSR) mission, which is proposed to demonstrate the feasibility of in-situ propellant production (ISPP). Five candidate ISPP systems for producing two fuels and oxygen from the Martian atmosphere are considered in this design trade-off study: 1) Zirconia cell with methanol synthesis, 2) Reverse water gas shift with water electrolysis and methanol synthesis, 3) Sabatier process for methane product ion with water electrolysis, 4) Sabatier process with water electrolysis and partial methane pyrolysis, and 5) Sabatier/RWGS combination with water electrolysis.
One of the goals of NASA''s HEDS enterprise is to establish a long-term human presence on Mars at a fraction of the cost of employing today''s technology. The most direct method of reducing mission cost is to reduce the launch mass of the spacecraft. If the propellants for the return phase of the mission are produced on Mars, the total spacecraft mass could be reduced significantly. An interim goal is a Mars Sample Return (MSR) mission, which is proposed to demonstrate the feasibility of in-situ propellant production (ISPP). Five candidate ISPP systems for producing two fuels and oxygen from the Martian atmosphere are considered in this design trade-off study:(1) Zirconia cell with methanol synthesis, (2) Reverse water gas shift (RWGS) with water electrolysis and methanol synthesis, (3) Sabatier process for methane production with water electrolysis, (4) Sabatier process with water electrolysis and partial methane pyrolysis, and (5) Sabatier/RWGS combination with water electrolysis. These systems have been the subject of numerous previous analytical studies and laboratory demonstrations. In this investigation, the systems are objectively compared on the basis of thermochemical performance models using a commonly used chemical plant analysis software package. The realistic effects of incomplete chemical conversion and gas phase separator performance are included in these models. This study focuses on the chemical processing and product separation subsystems. The CO2 compression upstream of the chemical plane and the liquefaction/storage components are not included here.
Methane is a potent greenhouse gas because it has a heat-absorbing ability that is 20 times stronger than the better-known carbon dioxide. It is also the dominant component of nature gas (>70%). Its current greenhouse effect is only second to carbon dioxide largely because of its relatively low atmospheric concentration. Alarmingly, however, the latter has seen a 1.5-time increase since 1750, mainly due to anthropogenic livestock farming, coal and natural gas mining, and organic matter decomposing in waste landfills. Mitigating such a trend effectively and efficiently is therefore highly desirable and intensely sought for. This final technical report describes some exciting research progresses made over the last three years supported financially by the aforementioned award. The research conducted focused on exploring electrochemical direct methane to methanol (DMTM) conversion under mild conditions. The goal of research was to explore the possibility of developing potentially game-changing electrocatalysts and electrocatalysis that can convert methane directly to methanol in a most sustainable way for curbing its effect on global warming. Progress has been made in the following three directions. First, by adapting a hydrogen fuel-cell configuration that enables gaseous methane to be transported directly to the electrocatalyst surface, we have overcome the perennial difficulty in measuring activity of methane electro-oxidation at low temperature and ambient pressure that has prevented any meaningful studies of electrocatalysis of methane conversion thus far. Second, we have developed a novel and operational in situ electrochemical infrared (IR) spectral cell for studying electrocatalysis of direct methane to methanol conversion. This novel cell is also expected to alleviate the measuring difficulty caused by low solubility of methane in aqueous electrolyte and low sticking coefficient for methane adsorption onto transition metal surface. It will improve significantly the IR’s signal to noise ratio. Third, we have successfully synthesized nano-sizing copper (Cu) exchanged zeolite mordenite (Cu-ZMOR) and coated it with carbon that enabled electrochemical access to the encaged Cu ions. This opens a door to unravel the chemistry of Cu ions in catalyzing direct methane to methanol conversion under mild experimental conditions. Altogether, these progresses achieved have laid a solid foundation for further exploring electrocatalysis of direct methane to methanol conversion in general where there exists “a plenty of room” for new discoveries and developments.
Straight-chain perfluorooctanesulfonic acid (C8 acid) identified as innocuous and stable wetting agent for use with polytetrafluoroethylene-containing electrodes in liquid-feed direct-oxidation fuel cells suggested for use in vehicles and portable power supplies. C8 acid in small concentrations in aqueous liquid solutions of methanol, trimethoxymethane, dimethoxymethane, and trioxane enables oxidation of these substances by use of commercially available electrodes of type designed originally for use with gases. This function specific to C8 acid molecule and not achieved by other related perfluorolkanesulfonic acids.
Trioxane identified as high-energy, nontoxic, solid substitute for formaldehyde as water-soluble fuel for use in direct-oxidation fuel cells. Found to undergo facile electrochemical oxidation to water and carbon dioxide at platinum and platinum-alloy electrodes in liquid-feed-type fuel cells that contain acid electrolytes or solid proton-exchange membrane electrolytes. Exhibits less crossover than do such conventional fuels as methanol and formaldehyde. Being solid at ambient temperature, trioxane offers significant advantages in handling and transportation. Synthesized from natural gas with relative ease.