Search NASA⌕ Search

SEARCH · Search NASA

Results for “MnO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Breakdown in Tantalum Capacitors

Failures in tantalum capacitors can be considered as a time-dependent-breakdown and reliability of all types of capacitors, including wet, MnO2 and polymer cathode parts, depends on the efficiency of self-healing that can mend parts after breakdown. A mechanism of self-healing in MnO2 capacitors is associated with oxygen reduction in the cathode layer and isolation of the breakdown site with high-resistive Mn2O3/Mn3O4 compositions. Although this mechanism is commonly accepted, details of self-healing have not been analyzed sufficiently yet, and the effects of scintillations on behavior of the parts has not been fully understood. There is a lack of data on the self-healing efficiency in different lots of capacitors. Even less is known about self-healing in polymer tantalum capacitors. In this work, different types of polymer and MnO2 capacitors have been tested for scintillation breakdown using a constant current stress (CCS) technique modified to allow detection of the amplitudes and durations of current spikes during breakdown. Characteristics of the parts and in particular leakage currents were measured to assess the efficiency of self-healing and improve screening processes for tantalum capacitors. Damaged sites were localized using infrared camera and their appearance analyzed after deprocessing and crosssectioning. Thermal effects during scintillations have been modeled, self-healing processes in polymer and MnO2 cathode capacitors discussed, and mechanisms of breakdown based on the growth of conductive filaments in the dielectric suggested.

tantalum polymer capacitors↗

Reinforced Electrode Architecture for a Flexible Battery with Paperlike Characteristics

Compliant energy storage has not kept pace with flexible electronics. Herein we demonstrate a technique to reinforce arbitrary battery electrodes by supporting them with mechanically tough, low-cost fibrous membranes, which also serve as the separator. The membranes were laminated to form a full cell, and this stacked membrane reinforcement bears the loads during flexing. This technique was used to make a high energy density, nontoxic Zn-MnO2 battery with printed current collectors. The Zn and MnO2 electrodes were prepared by using a solution-based embedding process. The cell had a nominal potential of 1.5 V and an effective capacity of approximately 3 mA h cm(-2). We investigated the effect of bending and fatigue on the electrochemical performance and mechanical integrity of the battery. The battery was able to maintain its capacity even after 1000 flex cycles to a bend radius of 2.54 cm. The battery showed an improvement in discharge capacity (ca. 10%) if the MnO2 electrode was flexed to tension as a result of the improvement of particle-to-particle contact. In a demonstration, the flexible battery was used to power a light-emitting diode display integrated with a strain sensor and microcontroller.

Gaikwad, AM↗

Electrodeposited Manganese Oxides on Three-Dimensional Carbon Nanotube Substrate: Supercapacitive Behaviour in Aqueous and Organic Electrolytes

Thin amorphous manganese oxide layers with a thickness of 3-5nm are electrodeposited on a carbon nanotube (CNT) film substrate that has a three-dimensional nanoporous structure (denoted asMnO2/CNT electrode). For the purpose of comparison, manganese oxide films are also electrodeposited on a flat Pt-coated Si wafer substrate (denoted as MnO2 film electrode). The pseudocapacitive properties of the MnO2 film and MnO2/CNT electrodes are examined in both aqueous electrolyte (1.0M KCl) and nonaqueousorganic electrolyte (1.0M LiClO4 in propylene carbonate). While both types of electrode showpseudocapacitive behaviour in the aqueous electrolyte, only the MnO2/CNT electrode does so in the organic electrolyte, due to its high oxide/electrolyte interfacial area and improved electron conduction through the CNT substrate. Compared with the MnO2 film electrode, the MnO2/CNT electrode shows a much higher specific capacitance and better high-rate capability, regardless of the electrolyte used.Use of the organic electrolyte results in a ∼6 times higher specific energy compared with that obtained with the aqueous electrolyte, while maintaining a similar specific power. The construction of a threedimensional nanoporous network structure consisting of a thin oxide layer on a CNT film substrate at the nm scale and the use of an organic electrolyte are promising approaches to improving the specific energyof supercapacitors.

supercapacitor, nanocomposite, organic electrolyte↗

Materials Data on LiMn3Al2(HO2)6 by Materials Project

LiAl2(HO)6(MnO2)3 crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of one LiAl2(HO)6 sheet oriented in the (0, 0, 1) direction and one MnO2 sheet oriented in the (0, 0, 1) direction. In the LiAl2(HO)6 sheet, Li1+ is bonded to six O2- atoms to form LiO6 octahedra that share edges with six equivalent AlO6 octahedra. There are four shorter (2.10 Å) and two longer (2.14 Å) Li–O bond lengths. Al3+ is bonded to six O2- atoms to form AlO6 octahedra that share edges with three equivalent LiO6 octahedra and edges with three equivalent AlO6 octahedra. There is four shorter (1.91 Å) and two longer (1.93 Å) Al–O bond length. There are two inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the second H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to one Li1+, two equivalent Al3+, and one H1+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to one Li1+, two equivalent Al3+, and one H1+ atom. In the MnO2 sheet, there are two inequivalent Mn+3.67+ sites. In the first Mn+3.67+ site, Mn+3.67+ is bonded to six O2- atoms to form edge-sharing MnO6 octahedra. There are a spread of Mn–O bond distances ranging from 1.92–1.97 Å. In the second Mn+3.67+ site, Mn+3.67+ is bonded to six O2- atoms to form edge-sharing MnO6 octahedra. There are four shorter (1.98 Å) and two longer (2.15 Å) Mn–O bond lengths. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 4-coordinate geometry to three Mn+3.67+ atoms. In the second O2- site, O2- is bonded in a 3-coordinate geometry to three Mn+3.67+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Mn5CuO12 by Materials Project

Mn2CuO6(MnO2)3 is trigonal omega-derived structured and crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of one Mn2CuO6 sheet oriented in the (0, 0, 1) direction and one MnO2 sheet oriented in the (0, 0, 1) direction. In the Mn2CuO6 sheet, Mn+4.40+ is bonded to six O2- atoms to form MnO6 octahedra that share edges with three equivalent MnO6 octahedra and edges with three equivalent CuO6 octahedra. There is four shorter (1.94 Å) and two longer (1.95 Å) Mn–O bond length. Cu2+ is bonded to six O2- atoms to form CuO6 octahedra that share edges with six equivalent MnO6 octahedra. There is two shorter (1.94 Å) and four longer (1.97 Å) Cu–O bond length. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to two equivalent Mn+4.40+ and one Cu2+ atom. In the second O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to two equivalent Mn+4.40+ and one Cu2+ atom. In the MnO2 sheet, Mn+4.40+ is bonded to six equivalent O2- atoms to form edge-sharing MnO6 octahedra. There is two shorter (1.94 Å) and four longer (1.95 Å) Mn–O bond length. O2- is bonded in a distorted trigonal non-coplanar geometry to three equivalent Mn+4.40+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Mn5CrO12 by Materials Project

CrMn2O6(MnO2)3 is trigonal omega-derived structured and crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of one CrMn2O6 sheet oriented in the (0, 0, 1) direction and one MnO2 sheet oriented in the (0, 0, 1) direction. In the CrMn2O6 sheet, Cr4+ is bonded to six O2- atoms to form CrO6 octahedra that share edges with six equivalent MnO6 octahedra. There is two shorter (1.93 Å) and four longer (1.95 Å) Cr–O bond length. Mn4+ is bonded to six O2- atoms to form MnO6 octahedra that share edges with three equivalent CrO6 octahedra and edges with three equivalent MnO6 octahedra. There are a spread of Mn–O bond distances ranging from 1.93–1.95 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to one Cr4+ and two equivalent Mn4+ atoms. In the second O2- site, O2- is bonded in a 3-coordinate geometry to one Cr4+ and two equivalent Mn4+ atoms. In the MnO2 sheet, there are two inequivalent Mn4+ sites. In the first Mn4+ site, Mn4+ is bonded to six O2- atoms to form edge-sharing MnO6 octahedra. All Mn–O bond lengths are 1.94 Å. In the second Mn4+ site, Mn4+ is bonded to six O2- atoms to form edge-sharing MnO6 octahedra. All Mn–O bond lengths are 1.94 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to three Mn4+ atoms. In the second O2- site, O2- is bonded in a 3-coordinate geometry to three Mn4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Mn5VO12 by Materials Project

VMn2O6(MnO2)3 is trigonal omega-derived structured and crystallizes in the monoclinic C2/m space group. The structure is two-dimensional and consists of one MnO2 sheet oriented in the (0, 0, 1) direction and one VMn2O6 sheet oriented in the (0, 0, 1) direction. In the MnO2 sheet, Mn4+ is bonded to six O2- atoms to form edge-sharing MnO6 octahedra. There is two shorter (1.94 Å) and four longer (1.95 Å) Mn–O bond length. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three equivalent Mn4+ atoms. In the second O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three equivalent Mn4+ atoms. In the VMn2O6 sheet, V4+ is bonded to six O2- atoms to form VO6 octahedra that share edges with six equivalent MnO6 octahedra. There is two shorter (1.91 Å) and four longer (1.98 Å) V–O bond length. Mn4+ is bonded to six O2- atoms to form MnO6 octahedra that share edges with three equivalent VO6 octahedra and edges with three equivalent MnO6 octahedra. There are a spread of Mn–O bond distances ranging from 1.92–1.97 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to one V4+ and two equivalent Mn4+ atoms. In the second O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to one V4+ and two equivalent Mn4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on BaMn5O11 by Materials Project

BaO(MnO2)5 crystallizes in the monoclinic Cm space group. The structure is three-dimensional and consists of two BaO ribbons oriented in the (0, 1, 0) direction and one MnO2 framework. In each BaO ribbon, Ba2+ is bonded in a 2-coordinate geometry to two equivalent O2- atoms. Both Ba–O bond lengths are 2.40 Å. O2- is bonded in a distorted L-shaped geometry to two equivalent Ba2+ atoms. In the MnO2 framework, there are five inequivalent Mn4+ sites. In the first Mn4+ site, Mn4+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing MnO6 octahedra. The corner-sharing octahedra tilt angles range from 51–54°. There are a spread of Mn–O bond distances ranging from 1.92–2.02 Å. In the second Mn4+ site, Mn4+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing MnO6 octahedra. The corner-sharing octahedra tilt angles range from 52–53°. There are a spread of Mn–O bond distances ranging from 1.95–2.16 Å. In the third Mn4+ site, Mn4+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing MnO6 octahedra. The corner-sharing octahedra tilt angles range from 52–54°. There are a spread of Mn–O bond distances ranging from 1.95–2.02 Å. In the fourth Mn4+ site, Mn4+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing MnO6 octahedra. The corner-sharing octahedra tilt angles range from 51–53°. There are a spread of Mn–O bond distances ranging from 1.91–1.99 Å. In the fifth Mn4+ site, Mn4+ is bonded to six O2- atoms to form edge-sharing MnO6 octahedra. There are a spread of Mn–O bond distances ranging from 1.89–2.02 Å. There are ten inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to three Mn4+ atoms. In the second O2- site, O2- is bonded in a 3-coordinate geometry to three Mn4+ atoms. In the third O2- site, O2- is bonded in a trigonal planar geometry to three Mn4+ atoms. In the fourth O2- site, O2- is bonded in a trigonal planar geometry to three Mn4+ atoms. In the fifth O2- site, O2- is bonded in a 3-coordinate geometry to three Mn4+ atoms. In the sixth O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three Mn4+ atoms. In the seventh O2- site, O2- is bonded in a 3-coordinate geometry to three Mn4+ atoms. In the eighth O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three Mn4+ atoms. In the ninth O2- site, O2- is bonded in a distorted trigonal planar geometry to three Mn4+ atoms. In the tenth O2- site, O2- is bonded in a trigonal planar geometry to three Mn4+ atoms.

36 MATERIALS SCIENCE↗

Possible roles of manganese redox chemistry in the sulfur cycle

Sulfate reducing bacteria (SRB) are very potent MnO2 reducers by virtue of their sulfide production: H2S reacts rapidly with MnO2 to yield Mn(2), elemental sulfur, and water. In manganese rich zones, Mn cycles rapidly if sulfate is present to drive the reduction and the MnO2 precipitates and sinks into anaerobic zones. The production of sulfide (by organisms requiring organic carbon compounds) to reduce manganese oxides might act to couple the carbon and sulfur cycles in water bodies in which the two cycles are physically separated. Iron has been proposed for this provision of reducing power by (Jorgensen, 1983), but since MnS is soluble and FeS is very insoluble in water, it is equally likely that manganese rather than iron provides the electrons to the more oxidized surface layers.

Nealson, K. H.↗

Asymmetric Supercapacitor for Long-Duration Power Storage

A document discusses a project in which a series of novel hybrid positive electrode materials was developed and tested in asymmetric capacitors with carbon negative electrodes. The electrochemical performance of the hybrid capacitors was characterized by cyclic voltammetry and a DC charge/discharge test. The hybrid capacitor exhibited ideal capacitor behavior with an extended operating voltage of 1.6 V in aqueous electrolyte, and energy density higher than activated carbon-based supercapacitors. Nanostructured MnO2 is a promising material for electrochemical capacitors (ECS) because of its low cost, environmentally friendly nature, and reasonably high specific capacitance. The charge capacity of the capacitors can be further improved by increasing the specific surface area of the MnO2 electrode material. The power density and space radiation stability of the capacitors can be enhanced by coating the MnO2 nanoparticles with conducting polymers. The conducting polymer coating also helps in radiation-hardening the ECS.

Rangan, Krishnaswamy K.↗

Atomistic Insights Into the Oriented Attachment of Tunnel-Based Oxide Nanostructures

Controlled synthesis of nanomaterials is one of the grand challenges facing materials scientists. In particular, how tunnel-based nanomaterials aggregate during synthesis while maintaining their well-aligned tunneled structure is not fully understood. Here, we describe the atomistic mechanism of oriented attachment (OA) during solution synthesis of tunneled α-MnO2 nanowires based on a combination of in situ liquid cell transmission electron microscopy (TEM), aberration-corrected scanning TEM with subangstrom spatial resolution, and first-principles calculations. It is found that primary tunnels (1 × 1 and 2 × 2) attach along their common {110} lateral surfaces to form interfaces corresponding to 2 × 3 tunnels that facilitate their short-range ordering. The OA growth of α-MnO2 nanowires is driven by the stability gained from elimination of {110} surfaces and saturation of Mn atoms at {110}-edges. During this process, extra [MnOx] radicals in solution link the two adjacent {110} surfaces and bond with the unsaturated Mn atoms from both surface edges to produce stable nanowire interfaces. Our results provide insights into the controlled synthesis and design of nanomaterials in which tunneled structures can be tailored for use in catalysis, ion exchange, and energy storage applications.

interface↗

Spectroscopic characterization of discharge products in Li-Air cells with aprotic carbonate electrolytes

Raman, infrared and X-ray photoelectron spectroscopies were used to characterize the thick coating of reaction products on carbon and MnO2 coated carbon cathodes produced during discharge of Li-air cells. The results show that neither Li2O2 or Li2O are major components of the insoluble discharge products; instead the products are largely composed of fluorine, lithium, and carbon, with surprisingly little oxygen. The complex reaction chemistry also appears to involve the formation of ethers or alkoxide products at the expense of the carbonate solvent molecules (ethylene carbonate and dimethylcarbonate). The irreversible discharge reaction is likely electrochemically promoted with Li-anion species and dissolved oxygen. Exactly how the molecular O2 participates in the reaction is unclear and requires further study. The addition of a conformal coating of MnO2 on the carbon lowers the cell s operating voltage, but does not alter the overall discharge chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sorption selectivity of birnessite particle edges: a d-PDF analysis of Cd( ii ) and Pb( ii ) sorption by δ-MnO 2 and ferrihydrite

Birnessite minerals (layer-type MnO2), which bear both internal (cation vacancies) and external (particle edges) metal sorption sites, are important sinks of contaminants in soils and sediments. Although the particle edges of birnessite minerals often dominate the total reactive surface area, especially in the case of nanoscale crystallites, the metal sorption reactivity of birnessite particle edges remains elusive. In this study, we investigated the sorption selectivity of birnessite particle edges by combining Cd(II) and Pb(II) adsorption isotherms at pH 5.5 with surface structural characterization by differential pair distribution function (d-PDF) analysis. We compared the sorption reactivity of δ-MnO2 to that of the nanomineral, 2-line ferrihydrite, which exhibits only external surface sites. Our results show that, whereas Cd(II) and Pb(II) both bind to birnessite layer vacancies, only Pb(II) binds extensively to birnessite particle edges. For ferrihydrite, significant Pb(II) adsorption to external sites was observed (roughly 20 mol%), whereas Cd(II) sorption was negligible. These results are supported by bond valence calculations that show comparable degrees of saturation of oxygen atoms on birnessite and ferrihydrite particle edges. Therefore, we propose that the sorption selectivity of birnessite edges follows the same order of that reported previously for ferrihydrite: Ca(II) < Cd(II) < Ni(II) < Zn(II) < Cu(II) < Pb(II).

54 ENVIRONMENTAL SCIENCES↗

Electrochemical trapping of metastable Mn 3+ ions for activation of MnO 2 oxygen evolution catalysts

Electrodeposited manganese oxide films are promising catalysts for promoting the oxygen evolution reaction (OER), especially in acidic solutions. The activity of these catalysts is known to be enhanced by the introduction of Mn3+. We present in situ electrochemical and X-ray absorption spectroscopic studies, which reveal that Mn3+ may be introduced into MnO2 by an electrochemically induced comproportionation reaction with Mn2+ and that Mn3+ persists in OER active films. Extended X-ray absorption fine structure (EXAFS) spectra of the Mn3+-activated films indicate a decrease in the Mn-O coordination number, and Raman microspectroscopy reveals the presence of distorted Mn-O environments. Computational studies show that Mn3+ is kinetically trapped in tetrahedral sites and in a fully oxidized structure, consistent with the reduction of coordination number observed in EXAFS. Although in a reduced state, computation shows that Mn3+ states are stabilized relative to those of oxygen and that the highest occupied molecular orbital (HOMO) is thus dominated by oxygen states. Furthermore, the Mn3+(Td) induces local strain on the oxide sublattice as observed in Raman spectra and results in a reduced gap between the HOMO and the lowest unoccupied molecular orbital (LUMO). The confluence of a reduced HOMO-LUMO gap and oxygen-based HOMO results in the facilitation of OER on the application of anodic potentials to the d-MnO2 polymorph incorporating Mn3+ ions.

08 HYDROGEN↗