Search NASA⌕ Search

SEARCH · Search NASA

Results for “MnO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Sorption selectivity of birnessite particle edges: a d-PDF analysis of Cd( ii ) and Pb( ii ) sorption by δ-MnO 2 and ferrihydrite

Birnessite minerals (layer-type MnO2), which bear both internal (cation vacancies) and external (particle edges) metal sorption sites, are important sinks of contaminants in soils and sediments. Although the particle edges of birnessite minerals often dominate the total reactive surface area, especially in the case of nanoscale crystallites, the metal sorption reactivity of birnessite particle edges remains elusive. In this study, we investigated the sorption selectivity of birnessite particle edges by combining Cd(II) and Pb(II) adsorption isotherms at pH 5.5 with surface structural characterization by differential pair distribution function (d-PDF) analysis. We compared the sorption reactivity of δ-MnO2 to that of the nanomineral, 2-line ferrihydrite, which exhibits only external surface sites. Our results show that, whereas Cd(II) and Pb(II) both bind to birnessite layer vacancies, only Pb(II) binds extensively to birnessite particle edges. For ferrihydrite, significant Pb(II) adsorption to external sites was observed (roughly 20 mol%), whereas Cd(II) sorption was negligible. These results are supported by bond valence calculations that show comparable degrees of saturation of oxygen atoms on birnessite and ferrihydrite particle edges. Therefore, we propose that the sorption selectivity of birnessite edges follows the same order of that reported previously for ferrihydrite: Ca(II) < Cd(II) < Ni(II) < Zn(II) < Cu(II) < Pb(II).

54 ENVIRONMENTAL SCIENCES↗

Electrochemical trapping of metastable Mn 3+ ions for activation of MnO 2 oxygen evolution catalysts

Electrodeposited manganese oxide films are promising catalysts for promoting the oxygen evolution reaction (OER), especially in acidic solutions. The activity of these catalysts is known to be enhanced by the introduction of Mn3+. We present in situ electrochemical and X-ray absorption spectroscopic studies, which reveal that Mn3+ may be introduced into MnO2 by an electrochemically induced comproportionation reaction with Mn2+ and that Mn3+ persists in OER active films. Extended X-ray absorption fine structure (EXAFS) spectra of the Mn3+-activated films indicate a decrease in the Mn-O coordination number, and Raman microspectroscopy reveals the presence of distorted Mn-O environments. Computational studies show that Mn3+ is kinetically trapped in tetrahedral sites and in a fully oxidized structure, consistent with the reduction of coordination number observed in EXAFS. Although in a reduced state, computation shows that Mn3+ states are stabilized relative to those of oxygen and that the highest occupied molecular orbital (HOMO) is thus dominated by oxygen states. Furthermore, the Mn3+(Td) induces local strain on the oxide sublattice as observed in Raman spectra and results in a reduced gap between the HOMO and the lowest unoccupied molecular orbital (LUMO). The confluence of a reduced HOMO-LUMO gap and oxygen-based HOMO results in the facilitation of OER on the application of anodic potentials to the d-MnO2 polymorph incorporating Mn3+ ions.

08 HYDROGEN↗

Electrochemical Kinetics and Performance of Layered Composite Cathode Material Li[Li0.2Ni0.2Mn0.6]O2

Lithium-rich, manganese-rich (LMR) layered composite cathode material Li[Li0.2Ni0.2Mn0.6]O2 has been successfully prepared by a co-precipitation method and its structure is confirmed by XRD characterization. The material delivers a high discharge capacity of 281 mAh g-1, when charged and discharged at a low current density of 10 mA g-1. However, significant increase of cell polarization and decrease of discharge capacity are observed at voltages below 3.5 V with increasing current densities. Galvanostatic intermittent titration technique (GITT) analysis demonstrates that lithium ion intercalation/de-intercalation reactions in this material are kinetically controlled by Li2MnO3 and its activated MnO2 component. The relationship between the electrochemical kinetics and rate performance as well as cycling stability has been systematically investigated. High discharge capacity of 149 mAh g-1 can be achieved at 10 C charge rate and C/10 discharge rate. The result demonstrates that the Li2MnO3 based material could withstand high charge rate (except initial activation process), which is very promising for practical applications. A lower discharge current density is preferred to overcome the kinetic barrier of lithium ion intercalation into MnO2 component, in order to achieve higher discharge capacity even at high charge rates.

Environmental Molecular Sciences Laboratory↗

Materials Data on MnCO3 by Materials Project

MnCO3 crystallizes in the monoclinic C2/c space group. The structure is one-dimensional and consists of four formaldehyde molecules and two MnO2 ribbons oriented in the (0, 0, 1) direction. In each MnO2 ribbon, Mn2+ is bonded in a distorted square co-planar geometry to four equivalent O2- atoms. All Mn–O bond lengths are 1.91 Å. O2- is bonded in a water-like geometry to two equivalent Mn2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Mn2O3 by Materials Project

Mn2O3 crystallizes in the triclinic P-1 space group. The structure is three-dimensional and consists of two MnO clusters; one MnO2 ribbon oriented in the (1, 1, 1) direction; and one Mn2O3 framework. In each MnO cluster, there are two inequivalent Mn3+ sites. In the first Mn3+ site, Mn3+ is bonded in a distorted linear geometry to two O2- atoms. There is one shorter (1.41 Å) and one longer (1.61 Å) Mn–O bond length. In the second Mn3+ site, Mn3+ is bonded in a 1-coordinate geometry to one O2- atom. The Mn–O bond length is 1.90 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted L-shaped geometry to two Mn3+ atoms. In the second O2- site, O2- is bonded in a single-bond geometry to one Mn3+ atom. In the MnO2 ribbon, there are three inequivalent Mn3+ sites. In the first Mn3+ site, Mn3+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.76–2.01 Å. In the second Mn3+ site, Mn3+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.87 Å. In the third Mn3+ site, Mn3+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 2.01 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted single-bond geometry to one Mn3+ atom. In the second O2- site, O2- is bonded in a distorted L-shaped geometry to two Mn3+ atoms. In the third O2- site, O2- is bonded in a 1-coordinate geometry to one Mn3+ atom. In the fourth O2- site, O2- is bonded in a 2-coordinate geometry to two Mn3+ atoms. In the Mn2O3 framework, there are fifteen inequivalent Mn3+ sites. In the first Mn3+ site, Mn3+ is bonded in a 7-coordinate geometry to seven O2- atoms. There are a spread of Mn–O bond distances ranging from 2.31–2.63 Å. In the second Mn3+ site, Mn3+ is bonded in a 2-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.82–2.51 Å. In the third Mn3+ site, Mn3+ is bonded in a distorted square co-planar geometry to four O2- atoms. There is two shorter (1.65 Å) and two longer (2.00 Å) Mn–O bond length. In the fourth Mn3+ site, Mn3+ is bonded in a 4-coordinate geometry to four O2- atoms. There is two shorter (1.83 Å) and two longer (2.12 Å) Mn–O bond length. In the fifth Mn3+ site, Mn3+ is bonded in a linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.72 Å. In the sixth Mn3+ site, Mn3+ is bonded in a distorted linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.76 Å. In the seventh Mn3+ site, Mn3+ is bonded in a distorted linear geometry to four O2- atoms. There is two shorter (1.68 Å) and two longer (2.31 Å) Mn–O bond length. In the eighth Mn3+ site, Mn3+ is bonded in a linear geometry to two equivalent O2- atoms. Both Mn–O bond lengths are 1.44 Å. In the ninth Mn3+ site, Mn3+ is bonded in a 1-coordinate geometry to three O2- atoms. There are a spread of Mn–O bond distances ranging from 1.97–2.29 Å. In the tenth Mn3+ site, Mn3+ is bonded in a 2-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.36–2.15 Å. In the eleventh Mn3+ site, Mn3+ is bonded in a 2-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.20–2.11 Å. In the twelfth Mn3+ site, Mn3+ is bonded in a linear geometry to two O2- atoms. There is one shorter (1.47 Å) and one longer (1.66 Å) Mn–O bond length. In the thirteenth Mn3+ site, Mn3+ is bonded in a 1-coordinate geometry to two O2- atoms. There are one shorter (2.01 Å) and one longer (2.40 Å) Mn–O bond lengths. In the fourteenth Mn3+ site, Mn3+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.70–2.03 Å. In the fifteenth Mn3+ site, Mn3+ is bonded in a rectangular see-saw-like geometry to four O2- atoms. There are a spread of Mn–O bond distances ranging from 1.93–2.03 Å. There are eighteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to three Mn3+ atoms. In the second O2- site, O2- is bonded in a distorted single-bond geometry to two Mn3+ atoms. In the third O2- site, O2- is bonded in a 5-coordinate geometry to two Mn3+ atoms. In the fourth O2- site, O2- is bonded in a distorted single-bond geometry to one Mn3+ atom. In the fifth O2- site, O2- is bonded in a 1-coordinate geometry to three Mn3+ atoms. In the sixth O2- site, O2- is bonded in a distorted L-shaped geometry to two Mn3+ atoms. In the seventh O2- site, O2- is bonded in a distorted water-like geometry to two Mn3+ atoms. In the eighth O2- site, O2- is bonded in a 1-coordinate geometry to two Mn3+ atoms. In the ninth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Mn3+ atoms. In the tenth O2- site, O2- is bonded in a distorted L-shaped geometry to two Mn3+ atoms. In the eleventh O2- site, O2- is bonded in a distorted bent 120 degrees geometry to three Mn3+ atoms. In the twelfth O2- site, O2- is bonded in a 2-coordinate geometry to three Mn3+ atoms. In the thirteenth O2- site, O2- is bonded in a 3-coordinate geometry to three Mn3+ atoms. In the fourteenth O2- site, O2- is bonded in a 3-coordinate geometry to two Mn3+ atoms. In the fifteenth O2- site, O2- is bonded in a 2-coordinate geometry to two Mn3+ atoms. In the sixteenth O2- site, O2- is bonded in a 1-coordinate geometry to four Mn3+ atoms. In the seventeenth O2- site, O2- is bonded in a 1-coordinate geometry to two Mn3+ atoms. In the eighteenth O2- site, O2- is bonded in a 1-coordinate geometry to three Mn3+ atoms.

36 MATERIALS SCIENCE↗

Mississippi State Biodiesel Production Project

Biodiesel is a renewable fuel conventionally generated from vegetable oils and animal fats that conforms to ASTM D6751. Depending on the free fatty acid content of the feedstock, biodiesel is produced via transesterification, esterification, or a combination of these processes. Currently the cost of the feedstock accounts for more than 80% of biodiesel production cost. The main goal of this project was to evaluate and develop non-conventional feedstocks and novel processes for producing biodiesel. One of the most novel and promising feedstocks evaluated involves the use of readily available microorganisms as a lipid source. Municipal wastewater treatment facilities (MWWTF) in the USA produce (dry basis) of microbial sludge annually. This sludge is composed of a variety of organisms, which consume organic matter in wastewater. The content of phospholipids in these cells have been estimated at 24% to 25% of dry mass. Since phospholipids can be transesterified they could serve as a ready source of biodiesel. Examination of the various transesterification methods shows that in situ conversion of lipids to FAMEs provides the highest overall yield of biodiesel. If one assumes a 7.0% overall yield of FAMEs from dry sewage sludge on a weight basis, the cost per gallon of extracted lipid would be $3.11. Since the lipid is converted to FAMEs, also known as biodiesel, in the in Situ extraction process, the product can be used as is for renewable fuel. As transesterification efficiency increases the cost per gallon drops quickly, hitting $2.01 at 15.0% overall yield. An overall yield of 10.0% is required to obtain biodiesel at $2.50 per gallon, allowing it to compete with soybean oil in the marketplace. Twelve plant species with potential for oil production were tested at Mississippi State, MS. Of the species tested, canola, rapeseed and birdseed rape appear to have potential in Mississippi as winter annual crops because of yield. Two perennial crops were investigated, Chinese tallow tree and tung tree. High seed yields from these species are possible because, there stature allows for a third dimension in yield (up). Harvest regimes have already been worked out with tung, and the large seed makes shedding of the seed with tree shakers possible. While tallow tree seed yields can be mind boggling (12,000 kg seed/ha at 40% oil), genotypes that shed seed easily are currently not known. Efficient methods were developed to isolate polyunsaturated fatty acid methyl esters from bio-diesel. The hypothesis to isolate this class of fatty acids, which are used as popular dietary supplements and prescription medicine (OMACOR), was that they bind transition metal ions much stronger than their harmful saturated analogs. AgBF4 has the highest extraction ability among all the metal ions tested. Glycerol is a key product from the production of biodiesel. It is produced during the transesterification process by cleaving the fatty acids from the glycerol backbone (the fatty acids are used as part of the biodiesel, which is a fatty acid methyl ester). Glycerol is a non-toxic compound with many uses; however, if a surplus exists in the future, more uses for the produced glycerol needs to be found. Another phase of the project was to find an add-on process to the biodiesel production process that will convert the glycerol by-product into more valuable substances for end uses other than food or cosmetics, focusing at present on 1,3-propanediol and lactic acid.All three MSU cultures produced products at concentrations below that of the benchmark microorganisms. There was one notable isolate the caught the eye of the investigators and that was culture J6 due to the ability of this microorganism to co-produce both products and one in particularly high concentrations. This culture with more understanding of its metabolic pathways could prove a useful biological agent for the conversion of glycerol. Heterogeneous catalysis was examined as an alternative to overcome the disadvantages of homogeneous transesterification, such as the presence of salts in the glycerine phase and the continuous lost of catalyst. A maximum soy biodiesel yield of 85% was obtained by BaO in 14 minutes, whereas, PbO, MnO2, CaO and MgO gave a maximum yields of 84%, 80%, 78% and 66% respectively at 215°C. The overall reaction order of PbO, MnO2, BaO, CaO and MgO was found to be 1, 1, 3, 1 and 1 respectively. The highest rate constant was observed for BaO, which was 0.0085 g2.mole-2.min-1. The performance of biodiesel in terms of type (e.g., NOx, and CO) and quantity of emissions was tested using soy biodiesel, blends of biodiesel and ethanol, and differently aged diesel engines. It was determined that saturated methyl esters, and relatively high oxygen content in the fuel, caused by addition of ethanol, increased the NOx emissions from new diesel engines compared to petroleum diesel.

09 BIOMASS FUELS↗

Potassium-Based alpha-Manganese Dioxide Nanofiber BinderFree Self-Supporting Electrodes: A Design Strategy for High Energy Density Batteries

This work minimizes electrode passive components and moves toward bridging the gap between actual and theoretical battery gravimetric energy density. Binder-free self-supporting (BFSS) cathodes were prepared from redox-active, high aspect ratio, potassium α-MnO2 nanofibers (K-OMS-2), eliminating the binder and current collector. The electroactive and structural element, K-OMS-2, was prepared using a scalable, moderate temperature, aqueous synthesis. The BFFS electrode approach allows fabrication of thick, high energy density electrodes with low impedance, with up to 10 fold improvement in delivered specific energy relative to conventional cathodes. This could enable high capacity large form factor cell designs, as required for applications demanding high energy content. In principle, this approach suggests a widely applicable paradigm for the construction of other BFFS electrodes through the targeted synthesis of other transition metal oxides with high aspect, fibrous morphologies. Introduction

25 ENERGY STORAGE↗

Novel Concept of pseudocapacitor using Stabilized Lithium Metal Powder and Non-lithiated Metal Oxide Electrodes in Organic Electrolyte

A concept of using two non-prelithiated metal oxides (e.g., MnO2, V2O5, and FeOx) in both positive and negative electrodes in organic Li-ion electrolytes has been proposed and tested to improve the energy density of pseudocapacitors. To take the advantages of this concept, additional lithium source is essential to provide lithium ions during the charge-discharge cycles. The stabilized lithium metal powder (SLMP) developed by FMC Corp., provides such an essential Li+ source. Here we report the first result of the symmetric pseudocapacitor using two non-prelithiated metal oxide (i.e., manganese oxide/carbon nanotube (MnO2/CNT) electrodes), with added SLMP in one of them. The capacitor using the SLMP added MnO2/CNT (positive) and pure MnO2/CNT (negative) electrode in 1.2 M LiPF6-EC:EMC electrolyte shows supercapacitive behaviors in 3.0 V voltage range. The addition of SLMP opens new opportunities of using the non-lithiated metal oxide electrodes in pseudocapacitors and hybrid electrochemical capacitors (ECs), which has not been possible before.

74 ATOMIC AND MOLECULAR PHYSICS↗

Non-destructive electrochemical diagnosis of failure mechanisms in aqueous zinc batteries

The early detection of secondary reactions that affect the life and performance of zinc manganese oxide batteries requires a shift from conventional time-consuming and often destructive procedures to rapid lifetime-predictive techniques. In this work, an electrochemical approach is employed to elucidate independent signatures for four common types of failure mechanisms in zinc manganese dioxide (Zn||MnO2) batteries—namely, the loss of zinc inventory, the loss of active material at the cathode, electrolyte depletion, and increased cell impedance. Our findings, specific to coin cell configurations, reveal that each induced failure mechanism can be distinctively modeled and identified based on responses from the rest voltage and columbic-efficiency data for prompt detection. For instance, electrolyte depletion response manifests a distinctive abrupt (>80 %) decrease in columbic efficiency (CE) and charge-rest voltage (Vc) while the discharge-rest voltage remained constant at ~1.3 V. Furthermore, electrolyte rejuvenation of the cell increased the CE to >95 % and restored Vc from ~0.3 to >1.7 V. Recovery experiments and reference performance tests demonstrated consistency between electrochemical descriptors and their associated failure mechanisms. Further, the outcomes of this work provide valuable insights and data models for some of the dominant failure mechanisms present in zinc manganese battery chemistries, which are beneficial to accelerated early-lifetime diagnosis and advancement of Zn batteries development.

25 ENERGY STORAGE↗

Zinc surface complexes on birnessite: A density functional theory study

Biogeochemical cycling of zinc is strongly influenced by sorption on birnessite minerals (layer-type MnO2), which are found in diverse terrestrial and aquatic environments. Zinc has been observed to form both tetrahedral (Zn{sup IV}) and octahedral (Zn{sup VI}) triple-corner-sharing surface complexes (TCS) at Mn(IV) vacancy sites in hexagonal birnessite. The octahedral complex is expected to be similar to that of Zn in the Mn oxide mineral, chalcophanite (ZnMn{sub 3}O{sub 7} {center_dot} 3H{sub 2}O), but the reason for the occurrence of the four-coordinate Zn surface species remains unclear. We address this issue computationally using spin-polarized Density Functional Theory (DFT) to examine the Zn{sub IV}-TCS and Zn{sup VI}-TCS species. Structural parameters obtained by DFT geometry optimization were in excellent agreement with available experimental data on Zn-birnessites. Total energy, magnetic moments, and electron-overlap populations obtained by DFT for isolated Zn{sup IV}-TCS revealed that this species is stable in birnessite without a need for Mn(III) substitution in the octahedral sheet and that it is more effective in reducing undersaturation of surface O at a Mn vacancy than is Zn{sub VI}-TCS. Comparison between geometry-optimized ZnMn{sub 3}O{sub 7} {center_dot} 3H{sub 2}O (chalcophanite) and the hypothetical monohydrate mineral, ZnMn{sub 3}O{sub 7} {center_dot} H{sub 2}O, which contains only tetrahedral Zn, showed that the hydration state of Zn significantly affects birnessite structural stability. Finally, our study also revealed that, relative to their positions in an ideal vacancy-free MnO{sub 2}, Mn nearest to Zn in a TCS surface complex move toward the vacancy by 0.08-0.11 {angstrom}, while surface O bordering the vacancy move away from it by 0.16-0.21 {angstrom}, in agreement with recent X-ray absorption spectroscopic analyses.

54 ENVIRONMENTAL SCIENCES↗

Diversity of Mn oxides produced by Mn(II)-oxidizing fungi

Manganese (Mn) oxides are environmentally abundant, highly reactive mineral phases that mediate the biogeochemical cycling of nutrients, contaminants, carbon, and numerous other elements. Despite the belief that microorganisms (specifically bacteria and fungi) are responsible for the majority of Mn oxide formation in the environment, the impact of microbial species, physiology, and growth stage on Mn oxide formation is largely unresolved. Here, we couple microscopic and spectroscopic techniques to characterize the Mn oxides produced by four different species of Mn(II)-oxidizing Ascomycete fungi (Plectosphaerella cucumerina strain DS2psM2a2, Pyrenochaeta sp. DS3sAY3a, Stagonospora sp. SRC1lsM3a, and Acremonium strictum strain DS1bioAY4a) isolated from acid mine drainage treatment systems in central Pennsylvania. The site of Mn oxide formation varies greatly among the fungi, including deposition on hyphal surfaces, at the base of reproductive structures (e.g., fruiting bodies), and on envisaged extracellular polymers adjacent to the cell. The primary product of Mn(II) oxidation for all species growing under the same chemical and physical conditions is a nanoparticulate, poorly-crystalline hexagonal birnessite-like phase resembling synthetic d-MnO2. The phylogeny and growth conditions (planktonic versus surface-attached) of the fungi, however, impact the conversion of the initial phyllomanganate to more ordered phases, such as todorokite (A. strictum strain DS1bioAY4a) and triclinic birnessite (Stagonospora sp. SRC1lsM3a). Our findings reveal that the species of Mn(II)-oxidizing fungi impacts the size, morphology, and structure of Mn biooxides, which will likely translate to large differences in the reactivity of the Mn oxide phases.

54 ENVIRONMENTAL SCIENCES↗

Changing chemistry of particulate manganese in the near- and far-field hydrothermal plumes from 15°S East Pacific Rise and its influence on metal scavenging

Dissolved Mn(II) in the hydrothermal plume is known to be microbially oxidized to form Mn(III/IV) oxides, and the Mn oxides scavenge other trace elements in seawater. In the GEOTRACES GP16 cruise, dissolved Mn (dMn) and particulate Mn (pMn) were found to be transported over 4000 km westwards from the Southern Eastern Pacific Rise. Previous studies in this plume showed different removal rates of dMn and pMn as well as pMn size distribution between the near-field (<80 km from the ridge axis) and far-field (>80 km) plumes. In order to understand Mn cycling in these plumes, spatial distribution, oxidation states, and mineral structures of Mn in small size fraction (SSF; 0.8–51 μm) and large size fraction (LSF; >51 μm) particles from the near-field and far-field plumes were examined using micro X-ray fluorescence spectrometry (μ-XRF), X-ray absorption near-edge structure spectroscopy (XANES), chemical species mapping, and extended X-ray absorption fine-structure spectroscopy (EXAFS). In the near-field plume, pMn in the SSF is dominated by oxidized Mn with Mn(III) fractions of ~30%. They are a mixture of δ-MnO 2 and triclinic birnessites that is known to be formed as a result of autocatalytic Mn(II) oxidation at the surface of freshly-formed δ-MnO2, suggesting that both microbial and autocatalytic Mn oxidation occur in the near-field plume. The LSF pMn in the near-field plume is also oxidized and often found in large aggregates several hundreds of μm in size. These aggregates settle out in the near-field and during transport, and are not found in the far-field plume. In the far-field plume where Mn oxides are not newly formed, pMn in the SSF is oxidized, but their Mn(III) fractions are smaller than in the near-field pMn. Unlike the SSF, the far-field plume LSF pMn is dominated by reduced Mn, implying very slow aggregation of pMn in the far-field plume. The different characteristics of pMn between the near-field and far-field plumes affect its scavenging of other trace elements. In the near-field plume, Co, Mo, 231 Pa are associated with pMn, but not in the far-field plume. 231 Pa is adsorbed to pFe rather than pMn in the far-field plume, and Pb is adsorbed to pFe in the entire plume. The result shows that freshly-formed Mn oxides in the near-field plume have higher scavenging capacity than the far-field plume pMn. Our findings suggest that the mineralogical age of Mn oxides may be an important parameter that controls the scavenging of many other trace elements and isotopes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of Zn Insertion into Nanostructured δ-MnO 2 : A Nonaqueous Rechargeable Zn Metal Battery

Unlike the more established lithium-ion based energy storage chemistries, the complex intercalation chemistry of multivalent cations in a host lattice is not well understood, especially the relationship between the intercalating species solution chemistry and the prevalence and type of side reactions. Among multivalent metals, a promising model system can be based on nonaqueous Zn2+ ion chemistry. Several examples of these systems support the use of a Zn metal anode, and reversible intercalation cathodes have been reported. This study utilizes a combination of analytical tools to probe the chemistry of a nanostructured delta-MnO2 cathode in association with a nonaqueous acetonitrile-Zn(TFSI)(2) electrolyte and a Zn metal anode. As many of the issues related to understanding a multivalent battery relate to the electrolyte electrode interface, the high surface area of a nanostructured cathode provides a significant interface between the electrolyte and cathode host that maximizes the spectroscopic signal of any side reactions or minor mechanistic pathways. Numerous factors affecting capacity fade and issues associated with the second phase formation including Mn dissolution in heavily cycled Zn/delta-MnO2 cells are presented including dramatic mechanistic differences in the storage mechanism of this couple when compared to similar aqueous electrolytes are noted.

25 ENERGY STORAGE↗

Anion–Anion Bonding and Topology in Ternary Iridium Seleno–Stannides

The synthesis and physical properties of two new and one known Ir–Sn–Se compound are reported. Their crystal structures are elucidated with transmission electron microscopy and powder X-ray diffraction. IrSn0.45Se1.55 is a pyrite phase which consists of tilted corner-sharing IrX6 octahedra with randomly distributed (Sn–Se)4– and (Se–Se)2– dimers. Ir2Sn3Se3 is a known trigonally distorted skutterudite that consists of cooperatively tilted corner-sharing IrSn3Se3 octahedra with ordered (Sn–Se)24– tetramers. Ir2SnSe5 is a layered, distorted β-MnO2 (pyrolusite) structure consisting of a double IrSe6 octrahedral row, corner sharing in the a direction and edge sharing in the b direction. This distorted pyrolusite contains (Se–Se)2– dimers and Se2– anions, and each double row is “capped” with a (Sn–Se)n polymeric chain. Resistivity, specific heat, and magnetization measurements show that all three have insulating and diamagnetic behavior, indicative of low-spin 5d6 Ir3+. Electronic structure calculations on Ir2Sn3Se3 show a single, spherical, nonspin–orbit split valence band and suggest that Ir2Sn3Se3 is topologically nontrivial under tensile strain due to inversion of Ir-d and Se-p states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale hydration in layered manganese oxides

Birnessite is a layered MnO2 mineral with a nanoscale interlayer region that accommodates layers of intercalated water. Variable distributions of Mn sites with oxidation states of II, III and IV are responsible for the high catalytic reactivity of birnessite in nature and as a valuable candidate for energy storage solutions. We here report water loading capabilities and the vibrational spectral signatures of two forms of birnessite of strongly contrasting particle size. Using X-ray diffraction we find that potassium-birnessite accommodates no more than one monolayer (1W) of water in its interlayer region. Molecular simulations show that this is an energetically favorable hydration state where interlayer potassium-water and direct water-birnessite interactions are greater than at other hydration levels. Simulations also suggest a stable 2W state but that is not achieved experimentally by contact with water vapor. Finally, this work provides a means to predict the distribution of adsorbed and interlayer water molecules using a recently developed composite model.

Cheng, Wei↗

Impact of Stabilizing Cations on Lithium Intercalation in Tunneled Manganese Oxide Cathodes

Stabilizing cations such as K + , Ba 2+ , and Ag + are known to provide charge neutrality and enhance structural stability in low-cost tunneled manganese dioxide (MnO 2 ) cathodes for Li ion batteries. However, a fundamental understanding of the role of these cations in the electrochemical performance of tunneled MnO 2 cathodes remains unclear, especially at low stabilizing cation concentrations. Here, we employ density functional theory (DFT + U) calculations to reveal the impact of stabilizing potassium cation (K + ) concentration on the structural stability, electronic properties, and kinetics of lithium transport in 2 x 2 tunneled manganese oxide (α-K y Mn 8 O 16 , at y = 0, 1, and 2) battery cathodes during lithium intercalation. Specifically, we provide insights into the effect of K + ions on several critical factors governing the electrochemical storage performance of tunneled MnO2 cathodes, including (a) energetically favorable Li+ host sites, (ii) Li + and electron transport capabilities, (iii) optimal intercalation pathways, crystal distortion, microstructural stability, and tunneled-to-layer phase transformation as a function of lithium content, and (iv) cell output voltage profile. Interestingly, we find that low K + concentrations (y ≤ 1) yield partially cation-deficient tunnels in the MnO 2 cathode. Such unique tunnel structures in the cathode enable (a) low kinetic barriers for Li transport, (b) excellent thermodynamic stability of the tunneled structure even at a high Li + loading (up to ~ 0.625 Li/Mn), and (c) good electronic conductivity facilitated by Jahn-Teller distortions; all of which are critical for achieving high capacity batteries with enhanced rate capability. Additionally, these results provide perspectives to design low-cost transition metal oxide cathodes for high-performance Li-ion batteries with excellent cycle life.

25 ENERGY STORAGE↗