Search NASA⌕ Search

SEARCH · Search NASA

Results for “NUCLEAR DEFORMATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

High-Resolution Laser Spectroscopy on the Hyperfine Structure of 255Fm (𝑍=100)

We report on high-resolution laser spectroscopy of 255Fm (𝑇1/2=20 h), one of the heaviest nuclides available from reactor breeding. The hyperfine structures in two different atomic ground-state transitions at 398.4 nm and 398.2 nm were probed by in-source laser spectroscopy at the RISIKO mass separator in Mainz, using the perpendicularly illuminated laser ion source and trap (PI-LIST) high-resolution ion source. Experimental results were combined with hyperfine fields from various atomic ab initio calculations, in particular using multiconfiguration Dirac-Hartree-Fock theory, as implemented in grasp18. In this manner, the nuclear magnetic dipole and electric quadrupole moments were derived to be 𝜇=−0.75⁢(5) 𝜇N and 𝑄s=+5.84⁢(13) eb, respectively. The magnetic moment indicates occupation of the 𝜈⁢7/2⁢[613] Nilsson orbital, while the large quadrupole moment confirms strong, stable prolate deformation consistent with systematics in the heavy actinides. Comparisons with available expectation values from nuclear theory show good agreement, providing a stringent benchmark for the used theoretical models. These results revise earlier data and establish 255Fm as a reference isotope for future high-resolution studies.

Ezold, Julie [ORNL] (ORCID:0000000250550022)↗
DOE OSTI2021

Unified description of the coupled-channels and statistical Hauser-Feshbach nuclear reaction theories for low energy neutron incident reactions

We incorporate the coupled-channels optical model into the statistical Hauser-Feshbach nuclear reaction theory, where the scattering matrix is diagonalized by performing the Engelbrecht-Weidenmüller transformation. This technique has been implemented in the coupled-channels optical model code ECIS by J. Raynal, and we extend this method so that all the open channels in a nucleon-induced reaction on a deformed nucleus can be calculated consistently.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Persistence of the Z = 28 shell gap in A = 75 isobars: Identification of a possible ( 1 / 2 – ) μ s isomer in Co 75 and β decay to Ni 75

Here, the evolution of shell structure around doubly magic exotic nuclei is of great interest in nuclear physics and astrophysics. In the ‘southwest’ region of 78 Ni, the development of deformation might trigger a major shift in our understanding of explosive nucleosynthesis. To this end, new spectroscopic information on key close-lying nuclei is very valuable. We intend to measure the isomeric and β decay of 75 Co, with one-proton and two-neutron holes relative to 78Ni, to access new nuclear structure information in 75 Co and its β-decay daughters 75 Ni and 74 Ni. The nucleus 75 Co is produced in relativistic in-flight fission reactions of 238 U at the Radioactive Ion Beam Factory in the RIKEN Nishina Center. Its isomeric and β decay are studied exploiting the BigRIPS and EURICA setups. We obtain partial β-decay spectra for 75 Ni and 74 Ni, and report a new isomeric transition in 75 Co. The energy [E γ = 1914(2)keV] and half-life [t 1/2 = 13(6) μs] of the delayed γ ray lend support for the existence of a J π = (1/2 – ) isomeric state at 1914(2) keV. A comparison with PFSDG-U shell-model calculations provides a good account for the observed states in 75 Ni, but the first calculated 1/2 – level in 75 Co, a prolate K = 1/2 state, is predicted about 1 MeV below the observed (1/2 – ) level. The spherical-like structure of the lowest-lying excited states in 75 Ni is proved. In the case of 75 Co, the results suggest that the dominance of the spherical configurations over the deformed ones might be stronger than expected below 78 Ni. Further experimental efforts to discern the nature of the J π = (1/2 – ) isomer are necessary.

59 ≤ A ≤ 89↗
DOE OSTI2022

From Fluid Flow to Coupled Processes in Fractured Rock: Recent Advances and New Frontiers

Abstract Quantitative predictions of natural and induced phenomena in fractured rock is one of the great challenges in the Earth and Energy Sciences with far‐reaching economic and environmental impacts. Fractures occupy a very small volume of a subsurface formation but often dominate fluid flow, solute transport and mechanical deformation behavior. They play a central role in CO 2 sequestration, nuclear waste disposal, hydrogen storage, geothermal energy production, nuclear nonproliferation, and hydrocarbon extraction. These applications require predictions of fracture‐dependent quantities of interest such as CO 2 leakage rate, hydrocarbon production, radionuclide plume migration, and seismicity; to be useful, these predictions must account for uncertainty inherent in subsurface systems. Here, we review recent advances in fractured rock research covering field‐ and laboratory‐scale experimentation, numerical simulations, and uncertainty quantification. We discuss how these have greatly improved the fundamental understanding of fractures and one's ability to predict flow and transport in fractured systems. Dedicated field sites provide quantitative measurements of fracture flow that can be used to identify dominant coupled processes and to validate models. Laboratory‐scale experiments fill critical knowledge gaps by providing direct observations and measurements of fracture geometry and flow under controlled conditions that cannot be obtained in the field. Physics‐based simulation of flow and transport provide a bridge in understanding between controlled simple laboratory experiments and the massively complex field‐scale fracture systems. Finally, we review the use of machine learning‐based emulators to rapidly investigate different fracture property scenarios and accelerate physics‐based models by orders of magnitude to enable uncertainty quantification and near real‐time analysis.

58 GEOSCIENCES↗
DOE OSTI2024

Constraining the Dense Matter Equation of State with New NICER Mass–Radius Measurements and New Chiral Effective Field Theory Inputs

Pulse profile modeling of X-ray data from the Neutron Star Interior Composition Explorer is now enabling precision inference of neutron star mass and radius. Combined with nuclear physics constraints from chiral effective field theory (χEFT), and masses and tidal deformabilities inferred from gravitational-wave detections of binary neutron star mergers, this has led to a steady improvement in our understanding of the dense matter equation of state (EOS). Here, we consider the impact of several new results: the radius measurement for the 1.42 M ⊙ pulsar PSR J0437−4715 presented by Choudhury et al., updates to the masses and radii of PSR J0740+6620 and PSR J0030+0451, and new χEFT results for neutron star matter up to 1.5 times nuclear saturation density. Using two different high-density EOS extensions—a piecewise-polytropic (PP) model and a model based on the speed of sound in a neutron star (CS)—we find the radius of a 1.4 M ⊙ (2.0 M ⊙ ) neutron star to be constrained to the 95% credible ranges ${12.28}_{-0.76}^{+0.50}$ km (${12.33}_{-1.34}^{+0.70}$ km) for the PP model and ${12.01}_{-0.75}^{+0.56}$ km (${11.55}_{-1.09}^{+0.94}$ km) for the CS model. The maximum neutron star mass is predicted to be ${2.15}_{-0.16}^{+0.14}$M ⊙ and ${2.08}_{-0.16}^{+0.28}$M ⊙ for the PP and CS models, respectively. We explore the sensitivity of our results to different orders and different densities up to which χEFT is used, and show how the astrophysical observations provide constraints for the pressure at intermediate densities. Moreover, we investigate the difference R 2.0 − R 1.4 of the radius of 2 M ⊙ and 1.4 M ⊙ neutron stars within our EOS inference.

gravitational wave sources↗
DOE OSTI2024

Microstructural Evolution of Tantalum During Deformation and Subsequent Annealing

Microstructure-aware models are necessary to predict the behavior of material based on process knowledge or to extrapolate mechanical properties of materials to environmental conditions which are not easily reproduced in the laboratory, e.g., nuclear reactor environments. Elemental Ta provides a relatively simple BCC system in which to develop a microstructural understanding of deformation processes which can then be applied to more complicated BCC alloys. In situ neutron diffraction during compressive deformation and subsequent heat treatment have been used to monitor the evolution of microstructural features in Ta throughout simulated processing steps. Crystallographic texture and dislocation density are determined as a function of first plastic strain, then temperature. Lattice strains are determined and attributed to stresses at macroscopic, grain and dislocation length scales. The increase of the dislocation density through deformation and subsequent recovery during heat treatment is monitored through the changing diffraction line profile. Also, randomization of the texture is used as a signature of recrystallization. The recovery of dislocations through annihilation is not observed to depend on the initial dislocation density in the range studied here. In contrast, recrystallization is observed to depend strongly on the initially dislocation density.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Global study of separable pairing interaction in covariant density functional theory

A systematic global investigation of pairing properties based on all available experimental data on pairing indicators has been performed for the first time in the framework of covariant density functional theory. It is based on the separable pairing interaction. The optimization of the scaling factors of this interaction to experimental data clearly reveals its isospin dependence in the neutron subsystem. However, the situation is less certain in the proton subsystem since similar accuracy of the description of pairing indicators can be achieved both with isospin-dependent and mass-dependent scaling factors. The differences in the functional dependencies of scaling factors lead to uncertainties in the prediction of proton and neutron pairing properties which are especially pronounced at high isospin and could have a significant impact on some physical observables. For a given part of the nuclear chart the scaling factors for spherical nuclei are smaller than those for deformed ones; this feature exists also in nonrelativistic density functional theories. Furthermore, its origin is traced back to particle-vibration coupling in odd-A nuclei which is missing in all existing global studies of pairing. Although the present investigation is based on the NL5(E) covariant energy density functional (CEDF), its general conclusions are expected to be valid also for other CEDFs built at the Hartree level.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Neural network reconstruction of the dense matter equation of state from neutron star observables

The Equation of State (EoS) of strongly interacting cold and hot ultra-dense QCD matter remains a major challenge in the field of nuclear astrophysics. With the advancements in measurements of neutron star masses, radii, and tidal deformabilities, from electromagnetic and gravitational wave observations, neutron stars play an important role in constraining the ultra-dense QCD matter EoS. Here, in this work, we present a novel method that exploits deep learning techniques to reconstruct the neutron star EoS from mass-radius (M-R) observations. We employ neural networks (NNs) to represent the EoS in a model-independent way, within the range of ~1-7 times the nuclear saturation density. The unsupervised Automatic Differentiation (AD) framework is implemented to optimize the EoS, so as to yield through TOV equations, an M-R curve that best fits the observations. We demonstrate that this method works by rebuilding the EoS on mock data, i.e., mass-radius pairs derived from a randomly generated polytropic EoS. The reconstructed EoS fits the mock data with reasonable accuracy, using just 11 mock M-R pairs observations, close to the current number of actual observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Failure investigation and mitigation after experimental research reactor fuel plate deformation in an irradiation device

Experimental research reactor fuel testing is conducted in the Belgian Reactor 2 (BR2) of the Belgian Nuclear Research Centre (SCK CEN) in dedicated irradiation vehicles or rigs. One such vehicle allows flat full-size fuel plates to be irradiated by inserting them into slotted baskets that captures a narrow portion of the longitudinal edges of the plates. The motion of the fuel plates within the baskets is possible within the narrow slots and thus, the plate is considered to be unattached. The design intentionally omits fixing mechanisms of the fuel plates to the baskets to facilitate the inspection and repositioning of the plates between the irradiation cycles and the accommodation of thermal expansion of the plates in the lateral direction. However, loosely inserted fuel plates have weak structural boundary conditions allowing for larger out-of-plane deflections caused by hydrodynamic loads exerted by the flowing coolant, as compared to those of fixed plates. Unexpected large deformations of plates occurred in several irradiation cycles that further resulted in a loss of cladding integrity. These deformations could not be attributed to a single source. This triggered a series of thermal hydraulic, structural, and fluid-structure interaction analyses aiming at understanding the observed phenomenon. The analyses revealed that, for a certain combination of unfavorable manufacturing and assembly tolerances, fuel plate edges could escape out of the slots in the irradiation basket due to the hydrodynamic load. Subsequently, the plate could become wedged inside the basket coolant channel opening. This resulted in reduced coolant flow and accelerated temperature increase and thermal expansion of the plate while under irradiation. This unfavorable feedback loop could then lead to excessive plate surface temperatures, deformed plates and cladding failure, as was observed in the experiments. These analyses not only provided a probable cause of the fuel plate failures, but also resulted in a new and improved design of the irradiation basket to avoid these issues in the future. In conclusion, a series of recent successful irradiations confirm that the sources of failures were identified correctly, and the implemented mitigations were adequate.

BR2↗
DOE OSTI2024

Soft interface instability and gas flow channeling in low-permeability deformable media

Understanding gas percolation through a clay layer or a shale formation is of great importance for the development of a geologic repository for nuclear waste disposal, a subsurface system for gas storage, and an engineering approach for hydrocarbon extraction from unconventional reservoirs. Gas injection experiments have revealed complex dynamic behaviours of gas percolation through water saturated compacted bentonite, characterized by a high breakthrough pressure, rapid breakthrough, a pressure/stress decay after the breakthrough, a relatively high migration rate, high-frequency periodic/nonperiodic variations in flow rate, stepwise rate reductions during relaxation, and low gas saturation over the whole process, all indicating channelling nature of the processes. Using linear stability analyses, we show that this channelling can autonomously emerge from the instability of the deformable interface between the injected gas and the compacted bentonite matrix driven by local stress concentration, pore dilation, and hydrologic gradient. Channel patterns formed would possess a fractal geometry. We further show that, once a percolating channel is established, the gas injected would percolate through the channel in a chain of gas bubbles, also due to the interface instability, resulting in periodic/chaotic variations in gas flow rate. Our work provides a unified explanation for key features observed for gas percolation in low-permeability deformable media. The work also suggests a possibility of designing an engineered barrier system for a nuclear waste repository that can have controllable gas release while limit water transport.

Bentonite↗
DOE OSTI2025

An accelerated framework for predicting creep rupture lifetimes in engineering alloys

Confidently predicting high-temperature deformation, including creep and creep rupture, is paramount for the design and commercialization of candidate materials for advanced nuclear energy systems. To accelerate creep quantification, we introduce a framework that enables rapid, cost-effective, and reliable prediction of creep rupture lifetimes, minimizing reliance on time-intensive bulk creep testing. Unlike conventional creep analysis, which requires extensive time and resources, our method leverages a maximum of four short-term bulk creep tests as training data for prediction. This framework combines high-throughput nanoindentation up to 700 °C with these targeted bulk tests to inform our creep rupture model in order to predict rupture lifetimes. The strong agreement between our predictions and conventional experimental data demonstrates the effectiveness of our approach for accelerated creep analysis and lifetime prediction of structural components in high-temperature applications. Our multi-pronged approach motivates further integration of computational tools and advanced instrumentation to establish a universal framework for understanding high-temperature material responses.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Constraints on the Muon Fraction and Density Profile in Neutron Stars

Muons in neutron stars (NSs) play especially important roles in addressing several interesting new physics questions associated with detecting as well as understanding interactions and astrophysical effects of muonphilic dark matter particles. The key model inputs for studying the latter are the total muon mass M μ , the muon mass fraction M μ /M NS over the NS mass M NS , and the muon radial density profile ρ μ (r) in NSs of varying masses. We investigate these quantities within a minimum model for the core of NSs consisting of neutrons, protons, electrons, and muons using an explicitly isospin-dependent parametric equation of state (EOS) constrained by available nuclear laboratory experiments and the latest astrophysical observations of NS masses, radii, and tidal deformabilities. Here, we found that the absolutely maximum muon mass M μ and its mass fraction M μ /M NS in the most massive NSs allowed by causality are about 0.025 M ⊙ and 1.1%, respectively. For the most massive NS of mass 2.14 M ⊙ observed so far, they reduce to about 0.020 M ⊙ and 0.9%, respectively. We also study respective effects of individual parameters describing the EOS of high-density neutron-rich nucleonic matter on the muon contents in NSs with varying masses. We found that the most important but uncertain nuclear physics ingredient for determining the muon contents in NSs is the high-density nuclear symmetry energy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Structure of the high-spin, β-decaying state in the neutron-rich nucleus 146 La

Excited structures in 146 Ce were populated in β decay of the high-spin state in the neutronrich nucleus 146 La. The beam was produced by the Californium Rare Isotope Breeder Upgrade (CARIBU) facility at Argonne National Laboratory, re-accelerated by the ATLAS accelerator and implanted on a moving-tape system in the middle of the GAMMASPHERE array. The decay scheme of the high-spin, β-decaying state in 146 La was revised with respect to previous studies and evaluated nuclear data. The structure of 146 La is discussed in the framework of the deformed Nilsson model and systematics of known quasiparticle structures in the region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Changes of deformed shell gaps at N ~ 100 in light rare-earth, neutron-rich nuclei

There have been compelling evidences indicating that deformed single-particle states in neutron- rich regions are different from those in the stable region. It was pointed out that for the light rare- earth (60Nd, 62Sm, and 64Gd), neutron-rich (N = 98-102) nuclei, the Woods-Saxon potential, the Nilsson modified oscillator potential with "universal" parameters, and the folded Yukawa potential all failed to describe the correct ordering of neutron single-particle states. The location and size of deformed shell gaps in this mass region are under current debate. We propose a modification for the "standard" Nilsson parameters of Bengtsson and Ragnarsson introduced in 1985. The proposed N-dependent spin-orbit interaction brings an effect of the tensor force for the deformed potential, which causes dynamic changes in deformed shell gaps with neutron number and deformation. By applying the modified Nilsson parameters to generate deformed bases for the Projected Shell Model, we demonstrate that the calculation can explain consistently the current experimental data, including the ground state configuration in odd-neutron nuclei, upbending of the yrast moment of inertia at higher spins and the energies of 2-quasineutron 6- and 4- isomers in even-even nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Nuclear Schiff Moments and CP Violation

This article reviews the calculation of nuclear Schiff moments, which one must know in order to interpret experiments that search for time-reversal-violating electric dipole moments in certain atoms and molecules. After briefly reviewing the connection between dipole moments and CP violation in and beyond the Standard Model of particle physics; Schiff's theorem, which concerns the screening of nuclear electric dipole moments by electrons; Schiff moments; and experiments to measure dipole moments in atoms and molecules, this review examines attempts to compute Schiff moments in nuclei such as 199 Hg and octupole-deformed isotopes such as 225 Ra, which are particularly useful in experiments. It then turns to ab initio nuclear-structure theory, describing ways in which both the in-medium similarity renormalization group and coupled-cluster theory can be used to compute important Schiff moments more accurately than the less controlled methods that have been applied so far.

CP violation↗
DOE OSTI2023

Skyrme–Hartree–Fock–Bogoliubov mass models on a 3D mesh: IIb. Fission properties of BSkG2

Large-scale models of nuclear structure are currently the only way to provide consistent datasets for the many properties of thousands of exotic nuclei that are required by nucleosynthesis simulations. In [W. Ryssens et al., Eur. Phys. J. A 58, 246 (2022)], we recently presented the new BSkG2 model based on an energy density functional of the Skyrme type. Relying on a flexible three-dimensional coordinate representation of the nucleus, the model takes into account both triaxial deformation and time-reversal symmetry breaking. BSkG2 achieves a state-of-the-art global description of nuclear ground state (g.s.) properties and reproduces in particular the known masses with a root-mean-square (rms) deviation of 678 keV. Moving beyond g.s. properties, the model also reproduces all empirical values for the primary and secondary barriers as well as isomer excitation energies of actinide nuclei with rms deviations below 500 keV, i.e. with unprecedented accuracy. Here we discuss in detail the extension of our framework to the calculation of the fission barriers of 45 actinide nuclei, including odd-mass and odd-odd systems. We focus in particular on the impact of symmetry breaking which is key to the accuracy of the model: we allow systematically for axial, reflection and time-reversal symmetry breaking. The effect of the latter on the fission properties of odd-mass and odd-odd nuclei is small, but we find that allowing for shapes with triaxial or octupole deformation, as well as shapes with both, is crucial to achieving this accuracy. Here, the numerical accuracy of our coordinate space approach, the variety of nuclear configurations explored and the simultaneous successful description of fission properties and known masses makes BSkG2 the tool of choice for the large-scale study of nuclear structure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Effects of anisotropic shale creep on the stress and permeability evolution of a geological nuclear waste repository

To ensure long-term safety and performance, geological nuclear waste repositories require low-permeability barriers such as bentonite buffers and/or shale host rock. Shale is not only known for its low permeability but also for its trend to undergo time-dependent deformation (i.e., creep), which could heal damage, but the effects of shale creep on the long-term performance of nuclear waste repositories have not been clearly understood. In particular, the anisotropic nature of shale (i.e., bedding) could have a significant effect on its creep behavior, and consequently, on the long-term performance of nuclear waste repositories. In this research, numerical simulations were carried out with the objective of showing the effects of anisotropic shale creep on the stress and permeability evolution of a generic geological nuclear waste repository in shale. The TOUGH-FLAC simulator, a thermo-hydromechanically (THM) coupled numerical code, was used for the simulations. To achieve the objective, comparisons were performed between the results of anisotropic shale creep simulations and those of different simulation cases, namely, no creep (i.e., elastic), isotropic creep, and long-term creep shale cases. Results of the comparisons show that the elastic and isotropic creep shale cases respectively led to the overestimation and underestimation of stress and permeability in the repository, whereas the long-term creep shale case, which accumulated greater creep in later periods than in earlier periods, helped to keep large shear and tensile stresses from developing while maintaining compressive spherical stress, resulting in consistently low permeability levels. These results indicate that performance assessments with elastic and isotropic creep formation models will provide the upper and lower bound estimates of stress and permeability, while more reasonable estimates will be given by an anisotropic creep formation model, and that shale with long-term creep characteristics will be beneficial in many aspects of the safety and performance of nuclear waste repositories.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗