Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nickel oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

1 kV Self-Aligned Vertical GaN Superjunction Diode

This work demonstrates vertical GaN superjunction (SJ) diodes fabricated via a novel self-aligned process. The SJ comprises n-GaN pillars wrapped by the charge-balanced p-type nickel oxide (NiO). After the NiO sputtering around GaN pillars, the self-aligned process exposes the top pillar surfaces without the need for additional lithography or a patterned NiO etching which is usually difficult. The GaN SJ diode shows a breakdown voltage (B V) of 1100 V, a specific on-resistance (R ON ) of 0.4 mΩ· cm2, and a SJ drift-region resistance ( R dr ) of 0.13 mΩ· cm2. Further, the device also exhibits good thermal stability with B V retained over 1 kV and R ON dropped to 0.3 mΩ· cm2 at 125°C. The trade-off between B V and R dr is superior to the 1D GaN limit. These results show the promise of vertical GaN SJ power devices. The self-aligned process is applicable for fabricating the heterogeneous SJ based on various wide- and ultra-wide bandgap semiconductors.

42 ENGINEERING↗
DOE OSTI2025

Magnetic Ni-N-Ni Centers in N-substituted NiO

Here, to explore how anion substitution modifies the existing magnetism in strongly correlated oxides, we investigate local electronic states and magnetic ordering in nickel oxide (NiO) induced by substituting oxygen (O) with nitrogen (N). Each N introduces an additional N 2p hole and modifies the magnetic moment of a neighboring nickel (Ni) cation site, as the exchange interaction between this hole and the Ni $e_{g}$ electrons exceeds the Ni-O-Ni superexchange interaction. This leads to the formation of Ni-N-Ni centers consisting of five spins, without perturbing the antiferromagnetic NiO lattice. These centers are studied using density functional theory and confirmed through high-resolution spectroscopy on N-substituted NiO thin films grown by molecular beam epitaxy. This type of magnetic design may enable future advances in quantum technologies based on strongly correlated materials, such as quantum sensors and spin-based qubits.

Godin, Simon [Univ. of British Columbia, Vancouver↗
NASA NTRS1964

Studies of Lubricating Materials in Vacuum

Lubricating materials for use in a vacuum environment have been the subject of a series of experimental investigations. Evaporation properties were evaluated for solid polymeric compositions. Friction and wear studies explored the behavior during sliding contact for series of polymeric compositions, binary alloys containing soft film-forming phases, complex alloys with film-forming materials, and a burnished MoS2 film. Friction and wear experiments were conducted at 10(exp-9)mm Hg with a 3/16-inch-radius-hemisphere rider specimen sliding on the flat surface of a rotating 2-1/2-inch-diameter disk specimen with materials that had low rates of evaporation. The influence of fillers in polytetrafluoroethylene (PTFE) on decomposition during vacuum friction studies was determined with a mass spectrometer. A real advantage in reducing decomposition and improving friction wear properties is gained by adding fillers (e.g., copper) that improve thermal conductivity through the composite materials. A polyimide and an epoxy-MoS2 composition material were found to have better friction and wear properties than PTFE compositions. A series of alloys (cast binary as well as more complex alloys) that contained microinclusions of potential film-forming material was studied. These materials replaced the normal surface oxides as they were worn away on sliding contact. Iron sulfide, nickel oxide, and tin are typical film-forming materials employed and were demonstrated to be effective in inhibiting surface welding and reducing friction. A burnished MoS2 film applied to type 440-C stainless steel in argon with a rotating soft wire brush had good endurance properties but somewhat higher friction than commercially available bonded films. An oil film applied to the burnished MoS2 markedly reduced its endurance life.

WEAR↗
DOE OSTI2021

What is the Role of Nb in Nickel-Rich Layered Oxide Cathodes for Lithium-Ion Batteries?

Nickel-rich layered metal oxide LiNi 1–y–z Mn y Co z O 2 (1 – y – z ≥ 0.8) materials are the most promising cathodes for next-generation lithium-ion batteries in electric vehicles. However, they lose more than 10% of their capacity on the first cycle, and interfacial/structural instability causes capacity fading. Coating and substitution are possible direct and effective solutions to solve these challenges. In this Letter, Nb coating and Nb substitution on LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is easily produced through a scalable wet chemistry method followed by sintering from 400 to 800 °C. A Li-free Nb oxide treatment is found to remove surface impurities forming a LiNbO 3 /Li 3 NbO 4 surface coating, to reduce the first capacity loss and to improve the rate performance. Furthermore, Nb substitution stabilizes the structure, as evidenced by less heat evolution on heating, thus providing better long cycling stability with a 93.2% capacity retention after 250 cycles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Substrate Effects When Using Photons to Make Perovskite Solar Cells

To shorten annealing time and minimize substrate heating, flash lamps that deliver short, intense light pulses, commonly called photonic curing, are used to replace thermal annealing using hot plates or ovens. This method is different from equilibrium heating in that the radiant energy is selectively absorbed by the film. The high-intensity light pulses produce a high peak temperature in the film. Because most processes follow Arrhenius behavior, reaching high temperatures allow chemical reactions/phase transformations to occur in a short time, significantly reducing the processing time. Often the results are non-intuitive. We will present fabricating flexible halide perovskite solar cells (PSCs) on indium tin oxide (ITO) coated Willow glass. The effect of ITO transmittance on the photonic curing of nickel nitrate sol-gel precursors into nickel oxide to fabricate hole transport layer and consequently the performance of PSCs. Unexpectedly, ITO samples processed by photonic curing show improved optical and electrical properties.

14 SOLAR ENERGY↗
DOE OSTI2021

Real Time Observation of Lithium Insertion into Pre-Cycled Conversion-Type Materials

Conversion-type electrode materials for lithium-ion batteries experience significant structural changes during the first discharge–charge cycle, where a single particle is taken apart into a number of nanoparticles. This structural evolution may affect the following lithium insertion reactions; however, how lithiation occurs in pre-cycled electrode materials is elusive. In this work, in situ transmission electron microscopy was employed to see the lithium-induced structural and chemical evolutions in pre-cycled nickel oxide as a model system. The introduction of lithium ions induced the evolution of metallic nickel, with volume expansion as a result of a conversion reaction. After pre-cycling, the phase evolutions occurred in two separate areas almost at the same time. This is different from the first lithiation, where the phase change takes place successively, with a boundary dividing the reacted and unreacted areas. Structural changes were restricted at the areas having large amount of fluorine, implying the residuals from the decomposition of electrolytes may have hindered the electrochemical reactions. This work provides insights into phase and chemical evolutions in pre-cycled conversion-type materials, which govern electrochemical properties during operation.

25 ENERGY STORAGE↗
DOE OSTI2022

Role of High-Spin Species and Pendant Amines in Electrocatalytic Alcohol Oxidation by a Nickel Phosphine Complex

We report the development of active and efficient electrocatalysts for oxidation of alcohols using earth-abundant metals will aid the progress towards a renewable energy economy. Here we present a detailed mechanistic study of electrocatalytic benzyl alcohol oxidation by a molecular nickel complex containing pendant amines using a combination of kinetic studies, NMR spectroscopy, and density functional theory. The catalyst preferentially binds alcohol in high-spin octahedral geometry, but this complex is not readily deprotonated by exogeneous base and inhibits catalysis. Dissociation of one or more solvent ligands returns the complex to a low-spin state that can be deprotonated. Kinetic modeling indicates the off-cycle high-spin intermediate lowers the catalytic turnover frequency by a factor of eight, suggesting that substantial gains in activity can be attained by improvements to the catalyst coordination geometry. In a second finding, we demonstrate the pendant amine of the catalyst only functions as a proton relay for the potential-determining step, oxidation of a nickel hydride intermediate, but does not have a substantial impact on the overall rate for oxidation of benzyl alcohol to benzaldehyde. This result contradicts the common expectation for pendant amines to participate in rate-limiting proton transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides

Abstract Surface lattice reconstruction is commonly observed in nickel-rich layered oxide battery cathode materials, causing unsatisfactory high-voltage cycling performance. However, the interplay of the surface chemistry and the bulk microstructure remains largely unexplored due to the intrinsic structural complexity and the lack of integrated diagnostic tools for a thorough investigation at complementary length scales. Herein, by combining nano-resolution X-ray probes in both soft and hard X-ray regimes, we demonstrate correlative surface chemical mapping and bulk microstructure imaging over a single charged LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) secondary particle. We reveal that the sub-particle regions with more micro cracks are associated with more severe surface degradation. A mechanism of mutual modulation between the surface chemistry and the bulk microstructure is formulated based on our experimental observations and finite element modeling. Such a surface-to-bulk reaction coupling effect is fundamentally important for the design of the next generation battery cathode materials.

25 ENERGY STORAGE↗
NASA NTRS2017

Ionizing Organic Compound Based Nanocomposites for Efficient Gamma-Ray Sensor

Thin film and nanocrystalline materials of oxides have been very attractive choice as low cost option for gamma-ray detection and have shown great promise. Our studies on pure oxide films indicated that thickness and microstructure have pronounced effect on sensitivity. Since the interaction of gamma-ray with composites involves all three interaction processes; photoelectric effect, Compton scattering, and pair production, composites containing ionic organics have better chance for enhancing sensitivity. In the composites of ionizing organics oxidation effect of unusual oxides changes much faster and hence increases the sensitivity of radiation. In this study, we have used nickel oxide and titanium oxide in ionic organics to develop composite materials for low energy gamma-ray sensing. We prepared composites containing ethylene carbonate and evaluated the effect of commercial Cs-137 radiation source by studying current-voltage relationship at several frequencies. Radiated samples showed higher resistivity compared to as prepared composites.

Singh, N. B.↗
DOE OSTI2025

The Sensitivity of Nickel Substitution in the Structural Design of Manganese-Based Layered and Lithiated Spinel Electrodes for Li-Ion Batteries

A concerted effort is being made at Argonne National Laboratory to explore and develop high-performance lithium-manganese-nickel-oxide cathode materials for the lithium battery industry. They are both energy- and cost-competitive relative to cobalt- and nickel-rich systems, such as LiCoO 2 , LiNi 0.8 Co 0.15 Al 0.05 O 2 , and LiNi 0.8 Mn 0.1 Co 0.1 O 2 . The recent discovery of the structural versatility of LiNi 0.5 Mn 0.5 O 2 , has revealed that it can exist in three configurations: lithiated spinel, partially disordered layered, and completely disordered rock salt within a common cubic-close-packed oxygen array. This versatility opens up the possibility of designing structurally integrated electrode components with interlinking 2-D (layered) and 3-D (spinel) channels for Li-ion transport. This paper highlights the sensitivity of Ni substitution and synthesis temperature on the structural and electrochemical properties of LiNi 0.50 Mn 0.50 O 2 , LiNi 0.53 Mn 0.47 O 2 , LiNi 0.47 Mn 0.53 O 2 , and LiNi 0.25 Mn 0.75 O 2 electrodes, as well as a cobalt-containing composition, LiNi 0.333 Mn 0.333 Co 0.333 O 2 , when synthesized at a relatively low temperature of 400 °C.

25 ENERGY STORAGE↗
DOE OSTI2020

Consequences of long-term water exposure for bulk crystal structure and surface composition/chemistry of nickel-rich layered oxide materials for Li-ion batteries

Water exposure of layered nickel-rich transition metal oxide electrodes, widely used in high-energy lithium-ion batteries, has detrimental effects on the electrochemical performance, which complicates electrode handling and prevents implementation of environmentally benign aqueous processing procedures. Elucidating the degradation mechanisms in play may help rationally mitigate/circumvent key challenges. Here, the bulk structural consequences of long-term (>2.5 years) deuterated water (D2O) exposure of intercalation materials with compositions Li x Ni 0.5 Co 0.2 Mn 0.3 O 2 (NCM523) and Li x Ni 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) are studied by neutron powder diffraction (NPD). Detailed inspection of the NPD data reveals gradual formation of a secondary crystalline phase in all exposed samples, not previously reported for this system. This unknown phase forms faster in liquid- compared to vapor-exposed compounds. Structural modelling of the NPD data shows a stable level of Li/Ni anti-site defects and does not indicate any significant changes in lattice parameters or hydrogen-lithium (D + /Li + ) exchange in the structure. Consequently, the secondary phase formation must take place via transformation rather than modification of the parent material. X-ray photoelectron spectroscopy data indicate formation of LiHCO 3 /Li 2 CO 3 at the surface and a Li-deficient oxide in the sub-surface region of the pristine compounds, and the presence of adsorbed water and transition metal hydroxides at the exposed sample surfaces.

25 ENERGY STORAGE↗
DOE OSTI2020

A Superconducting Praseodymium Nickelate with Infinite Layer Structure

A variety of nickel oxide compounds have long been studied for their manifestation of various correlated electron phenomena. Recently, superconductivity was observed in nanoscale infinite layer nickelate thin films of Nd 0.8 Sr 0.2 NiO 2 , epitaxially stabilized on SrTiO 3 substrates via topotactic reduction from the perovskite precursor phase. In this paper, we present the synthesis and properties of PrNiO 2 thin films on SrTiO 3 . Upon doping in Pr 0.8 Sr 0.2 NiO 2 , we observe superconductivity with a transition temperature of 7–12 K and robust critical current density at 2 K of 334 kA/cm 2 . These findings indicate that superconductivity in the infinite layer nickelates is relatively insensitive to the details of the rare earth 4 f configuration. Furthermore, they motivate the exploration of a broader family of compounds based on two-dimensional NiO 2 planes, which will enable systematic investigation of the superconducting and normal state properties and their underlying mechanisms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Theoretical investigation of superconductivity in trilayer square-planar nickelates

The discovery of superconductivity in Sr-doped NdNiO 2 is a crucial breakthrough in the long pursuit for nickel oxide materials with electronic and magnetic properties similar to those of the cuprates. NdNiO 2 is the infinite-layer member of a family of square-planar nickelates with general chemical formula R n +1 Ni n O 2 n +2 (R = La, Pr, Nd, n = 2, 3,...∞). In this Rapid Communication, we investigate superconductivity in the trilayer member of this series (R4Ni 3 O 8 ) using a combination of first-principles and $\textit{t–J}$ model calculations. R 4 Ni 3 O 8 compounds resemble cuprates more than RNiO 2 materials in that only Ni-d n 2 – y 2 bands cross the Fermi level, they exhibit a largely reduced charge transfer energy, and as a consequence superexchange interactions are significantly enhanced. In this work, we find that the superconducting instability in doped R 4 Ni 3 O 8 compounds is considerably stronger with a maximum gap about four times larger than that in Sr 0.2 Nd 0.8 NiO 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗