Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observation length”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Length of stain dosimeter

Payload customers for the Space Shuttle have recently expressed concerns about the possibility of their payloads at an adjacent pad being contaminated by plume effluents from a shuttle at an active pad as they await launch on an inactive pad. As part of a study to satisfy such concerns a ring of inexpensive dosimeters was deployed around the active pad at the inter-pad distance. However, following a launch, dosimeters cannot be read for several hours after the exposure. As a consequence factors such as different substrates, solvent systems, and possible volatilization of HCl from the badges were studied. This observation led to the length of stain (LOS) dosimeters of this invention. Commercial passive LOS dosimeters are sensitive only to the extent of being capable of sensing 2 ppm to 20 ppm if the exposure is 8 hours. To map and quantitate the HCl generated by Shuttle launches, and in the atmosphere within a radius of 1.5 miles from the active pad, a sensitivity of 2 ppm HCl in the atmospheric gases on an exposure of 5 minutes is required. A passive length of stain dosimeter has been developed having a sensitivity rendering it capable of detecting a gas in a concentration as low as 2 ppm on an exposure of five minutes.

Lueck, Dale E.↗

North America-Pacific plate boundary, an elastic-plastic megashear - Evidence from very long baseline interferometry

Data obtained by Mark III VLBI measurements of radio signals from permanent and mobile VLBI sites for 5.5 years of observations, starting in October 1982, were used to derive a picture of the earth crust deformation near the North America-Pacific plate boundary. The data, which included the vector positions of the VLBI sites and their rate of change, were used for comparison with a number of lithospheric deformation models based upon the concept that the motions of points near the North America-Pacific plate boundary are a linear combination of North America and Pacific velocities. The best of these models were found to fit 95 percent of the variance in 139 VLBI length and transverse velocity observations. Instantaneous shear deformation associated with plate tectonics is apparently developing in a zone 450 km wide paralleling the San Andreas Fault; some of this deformation will be recovered through elastic rebound, while the rest will be permanently set through plastic processes. Because the VLBI data have not been collected for a significant fraction of the earthquake cycle, they cannot discriminate between elastic and plastic behaviors.

Ward, Steven N.↗

Cellular Statistical Models of Broken Cloud Fields. Part IV: Effects of Pixel Size on Idealized Satellite Observations

In the fourth part of our “Cellular Statistical Models of Broken Cloud Fields” series we use the binary Markov processes framework for quantitative investigation of the effects of low resolution of idealized satellite observations on the statistics of the retrieved cloud masks. We assume that the cloud fields are Markovian and are characterized by the “actual” cloud fraction (CF) and scale length. We use two different models of observations: a simple discrete-point sampling and a more realistic “pixel” protocol. The latter is characterized by a state attribution function (SAF) which has the meaning of the probability that the pixel with a certain CF is declared cloudy in the observed cloud mask. The stochasticity of the SAF means that the cloud/clear attribution is not ideal and can be affected by external or unknown factors. We show that the observed cloud masks can be accurately described as Markov chains of pixels and use the master-matrix formalism (introduced in Part III of the series) for analytical computation of their parameters: the “observed” CF and scale length. This procedure allows us to establish a quantitative relationship (which is pixel-size dependent) between the actual and the observed cloud-field statistics. The feasibility of restoring the former from the latter is considered. The adequacy of our analytical approach to idealized observations is evaluated using numerical simulations. Comparison of the observed parameters of the simulated datasets with their theoretical expectations showed an agreement within 0.005 for the CF, while for the scale length it is within 1% in the sampling case and within 4% in the pixel case.

Mikhail D. Alexandrov↗

Application of Core Dynamics Modeling to Core-Mantle Interactions

Observations have demonstrated that length of day (LOD) variation on decadal time scales results from exchange of axial angular momentum between the solid mantle and the core. There are in general four core-mantle interaction mechanisms that couple the core and the mantle. Of which, three have been suggested likely the dominant coupling mechanism for the decadal core-mantle angular momentum exchange, namely, gravitational core-mantle coupling arising from density anomalies in the mantle and in the core (including the inner core), the electromagnetic coupling arising from Lorentz force in the electrically conducting lower mantle (e.g. D-layer), and the topographic coupling arising from non-hydrostatic pressure acting on the core-mantle boundary (CMB) topography. In the past decades, most effort has been on estimating the coupling torques from surface geomagnetic observations (kinematic approach), which has provided insights on the core dynamical processes. In the meantime, it also creates questions and concerns on approximations in the studies that may invalidate the corresponding conclusions. The most serious problem is perhaps the approximations that are inconsistent with dynamical processes in the core, such as inconsistencies between the core surface flow beneath the CMB and the CMB topography, and that between the D-layer electric conductivity and the approximations on toroidal field at the CMB. These inconsistencies can only be addressed with numerical core dynamics modeling. In the past few years, we applied our MoSST (Modular, Scalable, Self-consistent and Three-dimensional) core dynamics model to study core-mantle interactions together with geodynamo simulation, aiming at assessing the effect of the dynamical inconsistencies in the kinematic studies on core-mantle coupling torques. We focus on topographic and electromagnetic core-mantle couplings and find that, for the topographic coupling, the consistency between the core flow and the CMB topography is critical for correct evaluation of the coupling torque.

Kuang, Weijia↗

Terrestrial gravity instrumentation in the 20th Century: A brief review

At the turn of the century, only pendulum apparatuses and torsion balances were available for general exploration work. Both of these early techniques were cumbersome and time-consuming. It was no wonder that the development of the gravity meter was welcomed with a universal sigh of relief. By 1935 potential field measurements with gravity meters supplanted gradient measurements with torsion balances. Potential field measurements are generally characterized by three types: absolute - measurements are made in fundamental units, traceable to national standards of length and time at each observation site; relative with absolute scale - differences in gravity are measured in fundamental units traceable to national standards of length and time; and relative - differences in gravity are measured with arbitrary scale. Improvements in the design of gravity meters since their introduction has led to a significant reduction in size and greatly increased precision. As the precision increased, applications expanded to include the measurement of crustal motion, the search for non-Newtonian forces, archeology, and civil engineering. Apart from enhancements to the astatic gravity meter, few developments in hardware were achieved. One of these was the vibrating string gravity meter which was developed in the 1950s and was employed briefly for marine and borehole applications. Another is the cryogenic gravity meter which utilizes the stability of superconducting current to achieve a relative instrument with extremely low drift suitable for tidal and secular gravity measurements. An advance in performing measurements from a moving platform was achieved with the development of the straight-line gravity meter. The latter part of the century also saw the rebirth of gradient measurements which offers advantages for observations from a moving platform. Definitive testing of the Bell gradiometer was recently reported.

Valliant, H. D.↗

Measuring the topology of large-scale structure in the universe

An algorithm for quantitatively measuring the topology of large-scale structure has now been applied to a large number of observational data sets. The present paper summarizes and provides an overview of some of these observational results. On scales significantly larger than the correlation length, larger than about 1200 km/s, the cluster and galaxy data are fully consistent with a sponge-like random phase topology. At a smoothing length of about 600 km/s, however, the observed genus curves show a small shift in the direction of a meatball topology. Cold dark matter (CDM) models show similar shifts at these scales but not generally as large as those seen in the data. Bubble models, with voids completely surrounded on all sides by wall of galaxies, show shifts in the opposite direction. The CDM model is overall the most successful in explaining the data.

Gott, J. Richard, III↗

Impurities in silicon solar cells

The paper investigates the effects of metallic impurities on the performance of silicon solar cells. Czochralski and polycrystalline ingots were employed with boron and phosphorus as primary dopants and with controlled additions of secondary impurities. The data obtained from over 200 crystals indicate that impurity-induced performance loss is primarily due to a reduction of the base diffusion length. Based on this observation, a model is developed which predicts cell performance as a function of secondary impurity concentrations. The model calculations are in good agreement with experimental values except for Cu, Ni, Fe, and to a lesser degree, carbon, which at higher concentrations degrade the cell by junction defect mechanisms.

Davis, J. R., Jr.↗

Upper limits on the power in solar oscillations at 1.2 mm, 9 mm, 3.7 cm, and 11.1 cm wavelengths

A search for solar oscillations has been made using the NRAO 36-ft telescope at 1.2 mm, the NRL 85-ft telescope at 9 mm, and the NRAO four-element interferometer at 3.7 and 11.1 cm wavelengths. After corrections for the small coherence length of the optically observed oscillations, for their known spectral bandwidth, and for the visibility function of the interferometer, upper limits have been placed on the fluctuating power at oscillation frequencies near 3 mHz. The interferometric observations at 3.7 cm and the single-dish observations at 1.2 and 9 mm imply that less than 0.3, 0.04, and 0.1%, respectively, of the bremsstrahlung photons emitted from the chromosphere show periodic fluctuations. This is 1 to 3 orders of magnitude less than the fraction (approximately 1 to 2%) reported at ultraviolet wavelengths. Simple arguments in terms of weak shock theory suggest that the observable oscillations at centimeter and millimeter wavelengths should be intrinsically weaker in the thermal bremmstrahlung radiation than the optical, but the 3.7 cm wavelength results are explained only by the absence of periodic fluctuations at the level of formation.

Kundu, M. R.↗

An El Nino signal in atmospheric angular momentum and earth rotation

Anomalously high values of atmospheric angular momentum and length of day were observed in late January 1983. This signal in the time series of these two coupled quantities appears to have been a consequence of the equatorial Pacific Ocean warming event of 1982-1983.

Rosen, R. D.↗

The P/Halley: Spatial distribution and scale lengths for C2, CN, NH2, and H2O

From P/Halley long slit spectroscopic exposures on 12 dates, extending from Oct. 1985 to May 1986, spatial profiles were obtained for emissions by C2, CN, NH2, and OI(1D). Haser model scale lengths were fitted to these data. The extended time coverage allowed the checking for consistency between the various dates. The time varying production rate of P/Halley severely affected the profiles after perihelion, which is shown in two profile sequences on adjacent dates. Because of the time varying production rate, it was not possible to obtain reliable Haser model scale lengths after perihelion. The pre-perihelion analysis yielded Haser model scale lengths of sufficient consistency that they can be used for production rate determinations, whenever it is necessary to extrapolate from observed column densities within finite observing apertures. Results of scale lengths reduced to 1 AU are given and discussed.

Fink, Uwe↗

Measuring earth orientation with the Global Positioning System

A globally distributed network of high-precision receivers which obtain data from the full Global Positioning System (GPS) configuration of 18 or more satellites may soon become an efficient and economical method for the rapid determination of short-term variations in earth orientation. A covariance analysis has been performed to evaluate the errors associated with GPS monitoring of earth orientation. Earth orientation parameters were modeled either as constants over observing windows of various lengths, or as stochastic process-noise variables. The sensitivity of earth orientation estimates to systematic errors in selected model parameters was also examined. GPS measurements appear to be highly competitive with those from other techniques, and have the potential to generate nearly continuous centimeter-level earth orientation information to aid both spacecraft navigation and the study of high-frequency earth orientation-related processes.

Freedman, Adam P.↗

Polarization signatures for abandoned agricultural fields in the Manix Basin area of the Mojave Desert

Polarimetric signatures from abandoned circular alfalfa fields in the Manix Basin area of the Mojave desert show systematic changes with length of abandonment. The obliteration of circular planting rows by surface processes could account for the disappearance of bright 'spokes', which seems to be reflection patterns from remnants of the planting rows, with increasing length of abandonment. An observed shift in the location of the maximum L-band copolarization return away from VV, as well as an increase in surface roughness, both occurring with increasing age of abandonment, seems to be attributable to the formation of wind ripple on the relatively vegetationless fields. A Late Pleistocene/Holocene sand bar deposit, which can be identified in the radar images, is probably responsible for the failure of three fields to match the age sequence patterns in roughness and peak shift.

Ray, Terrill W.↗

Polarization signatures for abandoned agricultural fields in the Manix Basin area of the Mojave Desert - Can polarimetric SAR detect desertification?

Radar backscatter from abandoned circular alfalfa fields in the Manix Basin area of the Mojave desert shows systematic changes with length of abandonment. The obliteration of circular planting rows by surface processes could account for the disappearance of bright spokes, which seem to be reflection patterns from remnants of the planting rows, with increasing length of abandonment. An observed shift in the location of the maximum L-band copolarization return away from VV, as well as an increase in surface roughness, both occurring with increasing age of abandonment, seems to be attributable to the formation of wind ripples on the relatively vegetationless fields.

Ray, Terrill W.↗

The calculation of lateral stability with free controls

The discussion of the structural methods for obtaining lateral stability discloses the remarkable influence of the constant fuselage and wing proportions to the yawing moments. For the effectiveness of modifications in vertical tail surfaces and tail length, these quotas - little observed heretofore, in this connection - are decisive. This also applies to the amount of dihedral of the wing with regard to the roll stability of the complete wing already existing without angle of the dihedral.

Mathias, Gotthold↗

Studies of Shock Wave Interactions with Homogeneous and Isotropic Turbulence

A nearly homogeneous nearly isotropic compressible turbulent flow interacting with a normal shock wave has been studied experimentally in a large shock tube facility. Spatial resolution of the order of 8 Kolmogorov viscous length scales was achieved in the measurements of turbulence. A variety of turbulence generating grids provide a wide range of turbulence scales. Integral length scales were found to substantially decrease through the interaction with the shock wave in all investigated cases with flow Mach numbers ranging from 0.3 to 0.7 and shock Mach numbers from 1.2 to 1.6. The outcome of the interaction depends strongly on the state of compressibility of the incoming turbulence. The length scales in the lateral direction are amplified at small Mach numbers and attenuated at large Mach numbers. Even at large Mach numbers amplification of lateral length scales has been observed in the case of fine grids. In addition to the interaction with the shock the present work has documented substantial compressibility effects in the incoming homogeneous and isotropic turbulent flow. The decay of Mach number fluctuations was found to follow a power law similar to that describing the decay of incompressible isotropic turbulence. It was found that the decay coefficient and the decay exponent decrease with increasing Mach number while the virtual origin increases with increasing Mach number. A mechanism possibly responsible for these effects appears to be the inherently low growth rate of compressible shear layers emanating from the cylindrical rods of the grid.

Briassulis, G.↗

Gravity Estimation from a Simulated GRACE Mission: Short vs. Long Arcs

We present simulations of gravity estimation from a GRACE-like satellite mission: low-low intersatellite tracking with a precision of order 1 micron s(exp -1) yielding gravity fields of degree and order 120. We employ a unique parameterization of the intersatellite baseline vector which allows the gravity estimation to be performed (relatively) independently of the GPS (global positioning system) tracking data once sufficiently accurate orbits are obtained. This considerably simplifies data processing during the gravity estimation. During that process only certain components of the baseline parameterization need be adjusted; other components are uncorrelated with gravity and may be adopted unchanged from the initial GPS orbits. The technique is also amenable to very short arcs of data. We present comparisons of gravity estimation from 30 days of observations with arcs of length 15 minutes vs. arcs of one day. Our 'truth' field is the EGM96 (Earth Gravitational Model) model; our prior field is a degree-70 clone of EGM96, perturbed from it by amounts comparable to the standard errors of EGM96 (and identically zero for degrees 71-120). For a high inclination orbit, the short-arc analysis recovers low order gravity coefficients remarkably well, although higher order terms, especially sectorial terms, are understandably less accurate. The simulations suggest that either long or short arcs of GRACE data are likely to improve parts of the geopotential spectrum by several orders of magnitude. This is especially so for low order coefficients, which are markedly improved for all degrees through 120.

Rowlands, David D.↗

Three-Gorge Reservoir: A 'Controlled Experiment' for Calibration/Validation of Time-Variable Gravity Signals Detected from Space

With the advances of measurements, modern space geodesy has become a new type of remote sensing for the Earth dynamics, especially for mass transports in the geophysical fluids on large spatial scales. A case in point is the space gravity mission GRACE (Gravity Recovery And Climate Experiment) which has been in orbit collecting gravity data since early 2002. The data promise to be able to detect changes of water mass equivalent to sub-cm thickness on spatial scale of several hundred km every month or so. China s Three-Gorge Reservoir has already started the process of water impoundment in phases. By 2009,40 km3 of water will be stored behind one of the world s highest dams and spanning a section of middle Yangtze River about 600 km in length. For the GRACE observations, the Three-Gorge Reservoir would represent a geophysical controlled experiment , one that offers a unique opportunity to do detailed geophysical studies. -- Assuming a complete documentation of the water level and history of the water impoundment process and aided with a continual monitoring of the lithospheric loading response (such as in area gravity and deformation), one has at hand basically a classical forwardinverse modeling problem of surface loading, where the input and certain output are known. The invisible portion of the impounded water, i.e. underground storage, poses either added values as an observable or a complication as an unknown to be modeled. Wang (2000) has studied the possible loading effects on a local scale; we here aim for larger spatial scales upwards from several hundred km, with emphasis on the time-variable gravity signals that can be detected by GRACE and follow-on missions. Results using the Green s function approach on the PREM elastic Earth model indicate the geoid height variations reaching several millimeters on wavelengths of about a thousand kilometers. The corresponding vertical deformations have amplitude of a few centimeters. In terms of long-wavelength spherical harmonics, the induced geoid height variations are very close to the accuracy of GRACE- recoverable gravity field, while the low-degree (2 to 5) harmonics should be detectable. With a large regional time-variable gravity signal, the Three-Gorge experiment can serve as a useful calibration/verification for GRACE (including the elastic loading effects), and future gravity missions (especially for visco-elastic yielding as well as underground water variations).

Chao, Benjamin F.↗

X-Band Ultra-Low Noise Maser Amplifier Performance

Noise temperature measurements of an 8440 MHz ultra-low noise maser amplifier (ULNA) have been performed at sub-atmospheric, liquid helium temperatures. The traveling wave maser operated while immersed in a liquid helium bath. The lowest input noise temperature measured was 1.23 plus or minus 0.16 K at a physical temperature of 1.60 kelvin. At this physical temperature the observed gain per unit length of ruby was 4.6 dB/cm, and the amplifier had a 3 dB-bandwidth of 76 MHz.

ultra-low noise maser amplifier X-band maser syste↗