SEARCH · Search NASA

Results for “One”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1972

One-phonon transitions observed in the scattering of He atoms from a LiF/001/ surface.

For the scattering of a nearly monoenergetic beam of thermal-energy He atoms from a cleaved (001)LiF crystal surface, speed distributions of the reflected atoms are measured at suitably spaced scattering angles within the plane of incidence. From the measurements, elastic and one-phonon inelastic scattering processes are identified. Elastically scattered atoms distribute themselves in a set of sharp diffraction peaks. One-phonon inelastically scattered atoms are dispersed about each diffraction peak. The most probable velocities of the inelastically scattered atoms exhibit a characteristic sawtooth variation with scattering angle which, to first approximation, corresponds to conservation of the component of atom momentum tangent to the surface.-

Fisher, S. S.↗

NASA NTRS1972

Comparison of turbine annulus mass flow computed by one- and two-dimensional analysis

Variations in specific heat ratio, flow angle, critical velocity ratio, swirl distribution exponent, and radius ratio were considered in computing the mass flow. Variations in specific heat ratio had no significant effect and variations in critical velocity ratio had only small effect on computed mass flow between a one- and two-dimensional analysis. All non-free-vortex cases considered showed larger differences in computed mass flow between one- and two-dimensional analysis than for free vortex flow. For the non-free-vortex cases, decreasing radius ratio and increasing flow angle resulted in larger differences in mass flow as computed by the two methods.

Wasserbauer, C. A.↗

NASA NTRS1973

Exact intervals and tests for median when one sample value possibly an outliner

Available are independent observations (continuous data) that are believed to be a random sample. Desired are distribution-free confidence intervals and significance tests for the population median. However, there is the possibility that either the smallest or the largest observation is an outlier. Then, use of a procedure for rejection of an outlying observation might seem appropriate. Such a procedure would consider that two alternative situations are possible and would select one of them. Either (1) the n observations are truly a random sample, or (2) an outlier exists and its removal leaves a random sample of size n-1. For either situation, confidence intervals and tests are desired for the median of the population yielding the random sample. Unfortunately, satisfactory rejection procedures of a distribution-free nature do not seem to be available. Moreover, all rejection procedures impose undesirable conditional effects on the observations, and also, can select the wrong one of the two above situations. It is found that two-sided intervals and tests based on two symmetrically located order statistics (not the largest and smallest) of the n observations have this property.

Keller, G. J.↗

NASA NTRS1973

Prototype partial one-third octave band spectrum analyzer for acoustic, vibration and other wideband data for flight applications

The design refinement of a compact frequency analyzer for measurement and analysis on board flight vehicles is discussed. The analyzer has been constructed in a partial one-third octave band configuration with six filters and detectors spaced by the square root of 10 from 316 Hz to 100,000 Hz and a broadband detector channel. The analyzer has been tested over a temperature range of 40 to 120 F at a pressure of one atmosphere, and at a temperature of 75 F at an absolute pressure of 0.000001 torr, and has demonstrated at least 60 db of dynamic range.

Source record↗

NASA NTRS1973

Equilibrium properties of a one-dimensional kinetic system.

One-dimensional systems of N = 500 and 250 particles in equilibrium are numerically simulated utilizing the method of molecular dynamics. Periodic boundary conditions are imposed. The classical two-body interaction potential is short range, repulsive and has a corresponding finite force. The equations of state are determined for densities both less and greater than one. Corresponding theoretical isochores are determined from models based on nearest-neighbor interactions and on a truncated virial expansion, and a comparison is made with the experimental isochores. Time independent radial distributions are constructed numerically and discussed. A change of state from a solidlike state to a fluid-gas state based on the penetrability of the particles is predicted. The transition temperatures are estimated from the radial distribution functions and the nearest-neighbor model. Self-diffusion is observed and the corresponding constants are determined from the velocity autocorrelation functions.

Williams, J. H.↗

NASA NTRS1974

One way Doppler extractor. Volume 1: Vernier technique

A feasibility analysis, trade-offs, and implementation for a One Way Doppler Extraction system are discussed. A Doppler error analysis shows that quantization error is a primary source of Doppler measurement error. Several competing extraction techniques are compared and a Vernier technique is developed which obtains high Doppler resolution with low speed logic. Parameter trade-offs and sensitivities for the Vernier technique are analyzed, leading to a hardware design configuration. A detailed design, operation, and performance evaluation of the resulting breadboard model is presented which verifies the theoretical performance predictions. Performance tests have verified that the breadboard is capable of extracting Doppler, on an S-band signal, to an accuracy of less than 0.02 Hertz for a one second averaging period. This corresponds to a range rate error of no more than 3 millimeters per second.

Blasco, R. W.↗

NASA NTRS1974

One way Doppler Extractor. Volume 2: Digital VCO technique

A feasibility analysis and trade-offs for a one-way Doppler extractor using digital VCO techniques is presented. The method of Doppler measurement involves the use of a digital phase lock loop; once this loop is locked to the incoming signal, the precise frequency and hence the Doppler component can be determined directly from the contents of the digital control register. The only serious error source is due to internally generated noise. Techniques are presented for minimizing this error source and achieving an accuracy of 0.01 Hz in a one second averaging period. A number of digitally controlled oscillators were analyzed from a performance and complexity point of view. The most promising technique uses an arithmetic synthesizer as a digital waveform generator.

Nossen, E. J.↗

NASA NTRS1975

One man electrochemical air revitalization system

An integrated water vapor electrolysis (WVE) hydrogen depolarized CO2 concentrator (HDC) system sized for one man support over a wide range of inlet air conditions was designed, fabricated, and tested. Data obtained during 110 days of testing verified that this system can provide the necessary oxygen, CO2 removal, and partial humidity control to support one man (without exceeding a cabin partial pressure of 3.0 mmHg for CO2 and while maintaining a 20% oxygen level), when operated at a WVE current of 50 amperes and an HDC current of 18 amperes. An evaluation to determine the physical properties of tetramethylammonium bicarbonate (TMAC) and hydroxide was made. This provides the necessary electrolyte information for designing an HDC cell using TMAC.

Huddleston, J. C.↗

NASA NTRS1974

Statistical separability of agricultural cover types in subsets of one to twelve spectral channels

The purpose of this study was to determine the statistical separability of multispectral measurements from agricultural cover types: corn, soybeans, green forage (hay and pasture) and forest, in one to twelve spectral channels. Multispectral scanner data in twelve spectral channels in the wavelength range 0.4 to 11.7 microns, acquired for three flightlines were analysed by applying automatic pattern recognition techniques. The same analysis was performed for the data acquired a month later over the same three flightlines to investigate the effect of time on statistical separability of agricultural cover types. In the subsets of one to six spectral channels, the combination of wavelength regions (where V, N, M and T denote the visible, near infrared, middle infrared and thermal infrared wavelength regions, respectively): V, V M, V N M, V N M T, V V N M T, V V N M M T, respectively, were found to be the best choices for getting good overall statistical separability of the agricultural cover types for the data acquired.

Kumar, R.↗

NASA NTRS1974

One way Doppler tracking for on-orbit navigation

The integration of Doppler frequencies extracted from S-band communication and tracking signals received onboard an orbiting spacecraft provides a means of navigating on-orbit. This paper describes the one way Doppler tracking concept and two mechanizations which are being investigated by the Johnson Space Center to determine a suitable one way Doppler extraction technique for the Space Shuttle Orbiter and other advanced space systems. The designs of two breadboard models are outlined and measurement errors are discussed.

Lamoreux, J. C.↗

NASA NTRS1975

Robustly optimal rate one-half binary convolutional codes

Three optimality criteria for convolutional codes are considered in this correspondence: namely, free distance, minimum distance, and distance profile. Here we report the results of computer searches for rate one-half binary convolutional codes that are 'robustly optimal' in the sense of being optimal for one criterion and optimal or near-optimal for the other two criteria. Comparisons with previously known codes are made. The results of a computer simulation are reported to show the importance of the distance profile to computational performance with sequential decoding.

Johannesson, R.↗

NASA NTRS1975

The Noisiness of Low-Frequency One-Third Octave Bands of Noise

This study examined the relative noisiness of low frequency one-third octave bands of noise bounded by the bands centered at 25 Hz and 200 Hz, with intensities ranging from 50 db sound pressure level (SPL) to 95 db SPL. The thirty-two subjects used a method-of-adjustment technique, producing comparison-band intensities as noisy as standard bands centered at 100 Hz and 200 Hz with intensities of 60 db SPL and 72 db SPL. Four contours of equal noisiness were developed for one-third octave bands, extending down to 25 Hz and ranging in intensity from approximately 58 db SPL to 86 db SPL. These curves were compared with the contours of equal noisiness of Kryter and Pearsons. In the region of overlap (between 50 Hz and 200 Hz) the agreement was good.

Lawton, B. W.↗

NASA NTRS1975

The role of multiple scattering in one-dimensional radiative transfer

The usual methods of solving the radiative transfer equation yield answers which embrace all orders of scattering and thus shed little light on the underlying physical process. The present analysis examines the contributions of the various orders of scattering to the one dimensional transfer of radiation. In the one dimensional case an exact analytical solution exists and the problem reduces to that of expanding these exact solutions in powers of the albedo for single scattering. Formulas are given which permit the calculation of any order of scattering in an atmosphere of arbitrary optical thickness, particle albedo, and asymmetry parameter. The results should aid in identifying those physical situations where only the lowest orders of scattering play a significant role and where appropriate approximate methods might provide results of acceptable accuracy.

Adamson, D.↗

NASA NTRS1975

Chemically Reacting One-Dimensional Gas-Particle Flows

The governing equations for the one-dimensional flow of a gas-particle system are discussed. Gas-particle effects are coupled via the system momentum and energy equations with the gas assumed to be chemically frozen or in chemical equilibrium. A computer code for calculating the one-dimensional flow of a gas-particle system is discussed and a user's input guide presented. The computer code provides for the expansion of the gas-particle system from a specified starting velocity and nozzle inlet geometry. Though general in nature, the final output of the code is a startline for initiating the solution of a supersonic gas-particle system in rocket nozzles. The startline includes gasdynamic data defining gaseous startline points from the nozzle centerline to the nozzle wall and particle properties at points along the gaseous startline.

Tevepaugh, J. A.↗

NASA NTRS1976

Analysis of ECLSS performance during reentry after loss of one ammonia tank

An analysis was performed to determine whether, in case of a loss of one of the ammonia tanks, the Ammonia Boiler System can provide adequate heat rejection for the orbiter ECLSS during reentry. Results indicate that temperatures can be maintained as long as NH3 is available, but that one tank does not contain sufficient NH3 to complete all missions. A recommendation is made to investigate incorporation of onboard NH3 quantity calculations, and/or addition of a third NH3 tank.

Steines, G. J.↗

NASA NTRS1976

A comparison of one-dimensional theoretical models of stratospheric minor constituents

The density profiles of stratospheric minor constituents are compiled from several one-dimensional theoretical models that have appeared in the literature. The models are compared with each other and also with observations if data are available. The similarity and disparity of the models are clarified and discussed. If a large difference exists among the models, attempts are made to interpret it as much as possible in terms of the physical and chemical data employed in each model. The inadequacy of one-dimensional models in calculating the realistic ozone density distributions and the problems related to it are briefly discussed.

Shimazaki, T.↗

NASA NTRS1976

Encounters of spherical galaxies. I - Galaxy models with one stellar population. II - Galaxy models with two stellar populations

Close encounters between two spherical galaxies of equal size and consisting of only one stellar population are calculated using models of elliptical galaxies constructed according to King's (1966) method. The mass loss and the change in internal energy are computed under the assumption that the stars do not change their velocity or density distributions during the encounters. The results for a specific case are compared with the calculations of Gallagher and Ostriker (1972), who employed the observed brightness distribution and the derived density distribution of the E1 galaxy NGC 3379. For models with one stellar population, the results suggest that the radius of a galactic halo would have to be at least 200 kpc for appreciable mass loss to occur over the history of a galaxy in a rich cluster. The calculations are then extended to include a halo population characterized by a high central velocity dispersion. In this case, it is found that the halo population of sufficiently large galaxies can be dispersed without appreciably affecting the main population. It is suggested that the missing mass of many clusters of galaxies may be located in an intergalactic sea of faint stars making up an envelope for the centrally located gE galaxies.

Biermann, P.↗

NASA NTRS1976

Optimization of continuous one-dimensional structures under steady harmonic excitation

The paper examines some questions relating to the optimal design of continuous one-dimensional structures driven by harmonically oscillating loads. Optimal-control methods are applied to a cantilever bar driven sinusoidally by an axial force at its tip to illustrate the minimum-weight design of one-dimensional structures under dynamic excitation. Realistic constraints are imposed during the optimizations, including a maximum allowable stress amplitude at any point along the bar and a minimum cross-sectional area. It is shown that in the absence of damping, the design space may contain many disjoint feasible regions, and multiple optima can exist. Detailed solutions are obtained for continuous bars with an excitation frequency less than, and then greater than, the fundamental free-vibration frequency. It is found that above a certain excitation frequency, two or more arcs with different constraints characterize the optimal designs. It is concluded that when more than two different constrained arcs characterize the optimal solution, the continuum approach may be impractical, and finite-element approximations may offer the only alternative.

Johnson, E. H.↗