Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLANT CHARACTERISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Development of guayule (Parthenium argentatum) research in cell culture

Utilizing the lateral buds of known high rubber producing plants as explants in culture medium specifically designed to engender shoot development and to prevent callus formation, unlimited numbers of replicate plants can be produced. Each has the same genotype as the parent. This procedure has long been used to rid plants of virus, the latter generally does not occur in the embryonic tissues of the bud; it also, by virtue of its axenic nature, eliminates all microorganisms characteristic of the parent plant. Auxins were found essential to callus formation, but since the latter is known to bring about chromosomal aberrations, it was avoided. The cytokinin benzylaminopurine strongly stimulated shoot growth, and the number of regenerated buds on the inoculum was proportional to its concentration. These buds produced shoots several centimeters in length which were caused to root on medium containing indolebutyric acid. Transferred to the septic condition of soil, the plantlets were gradually brought into full sunlight where they showed a brief vegetative growth with production of mature leaves, and flowered.

Ball, E. A.↗
NASA NTRS1974

Inventory of forest and rangeland and detection of forest stress

The author has identified the following significant results. Controlled visual interpretation of one ERTS-1 scene taken at the peak of the growing season has indicated that classification to the ECOCLASS Series level is not entirely satisfactory. For five forest classes, aspen, Douglas-fir, lodgepole pine, ponderosa pine, and Spruce/fir, correct identification ranged from 60 to 70 percent. With the exception of shortgrass and wet shrubby meadow classes in the nonforest categories (81 and 100 percent correct, respectively), correct identification of the nonforest classes is so far unacceptable. The low accuracies are believed due to: (1) edge effects due to ecotones between plant community classes with apparent similar image characteristics; (2) confounding effects of amount of plant crown cover and ground surface material in the scene; and (3) variable land slope degree and aspect as it affects the image signature.

Heller, R. C.↗
NASA NTRS1985

Evaluation of performance characteristics for a space antenna system subjected to stochastic disturbances

Control system synthesis for a large space antenna system is investigated based on stochastic linear optimal control techniques and the minimization of a quadratic Gaussian performance index. Parametric studies indicate that suitable combinations of plant and sensor noise characteristics, and state weighting matrices, can be found to meet the mission RMS pointing requirements. Using a combination of the Kalman filter and linear feedback, an optimal control law for the finite element model of the Hoop/Column structural system without damping is obtained. Removing the hoop-mounted actuator resulted in an increase in the RMS errors, an increased control effort, and an increase in the least damped modal time constant. Removing the hoop-mounted sensor resulted in an RMS error increase and estimator performance degradation, with less system RMS performance degradation than noted for removal of the hoop-mounted actuator.

Ananthakrishnan, S.↗
DOE OSTI2025

Seeing the forest for all the trees: Mycorrhizal‐associated nutrient economies are modulated by stem density and the synchrony between overstorey and understorey communities

1. Identifying relationships between plant communities and soil characteristics is a critical step in understanding the consequences of species gains and losses in ecosystems. The mycorrhizal associated nutrient economy (MANE) hypothesis predicts that the degree to which tree species and their mycorrhizal associates affect soil properties is driven by the relative dominance of different mycorrhizal types (often measured by relative basal area). While this approach emphasizes the importance of canopy trees, it does not account for how other factors (e.g. the density and composition of understorey trees) may alter tree–soil relationships. 2. We analysed tree–soil data from an eastern deciduous forest in southern Indiana, USA that contains >29,000 georeferenced stems, including 21 species that associate with arbuscular mycorrhizal (AM) fungi and 14 that associate with ectomycorrhizal (ECM) fungi. We sampled soils (upper 5 cm) from across the plot and modelled soil characteristics to tree communities. Given differences in soil characteristics among AM-dominated and ECM-dominated neighbourhoods, we hypothesized that relationships between tree-mycorrhizal dominance and soils would be affected by both the density of stems in the plot (owing to ‘Zinke’ individual plant effects) and composition of the understorey trees (owing to ‘trait divergence effects’) 3. In support of our Zinke hypothesis, we found that the relationships between tree-mycorrhizal dominance and soil variables (soil pH, nitrification rates and carbon to nitrogen ratio) were strengthened as stand density increased. In support of the trait divergence hypothesis, we found that as the mismatch between overstorey and understorey composition increased (e.g. AM-dominated understories beneath ECM-dominated overstories and vice versa), the relationship between tree dominance and soil variables weakened. We were able to use these insights to create mycorrhizal metrics to predict soil variables that were sensitive to the structural composition of neighbourhoods. 4. Synthesis. Our results indicate that relationships between plants and soils in forests are not only shaped by dominant overstorey trees but also the density and composition of understorey trees. Thus, efforts to predict the ecosystem consequences of species gains and losses may benefit from considering these elements of forest structure and not only the basal area of the dominant trees.

MANE framework↗
NASA NTRS1979

Development of processes and techniques for molding thermally stable, fire-retardant, low-smoke-emitting polymeric materials

All available newly developed nonmetallic thermally stable polymers were examined for the development of processes and techniques by compression molding, injection molding, or thermoforming cabin interior parts. Efforts were directed toward developing molding techniques of new polymers to economically produce usable nonmetallic molded parts. Data on the flame resistant characteristics of the materials were generated from pilot plant batches. Preliminary information on the molding characteristics of the various thermoplastic materials was obtained by producing actual parts.

Silverman, B.↗
NASA NTRS1993

Polarized and specular reflectance variation with leaf surface features

The linearly polarized reflectance from a leaf depends on the characteristics of the leaf surface. In the present study the leaf reflectance of a number of plant species with varying surface characteristics was measured at the Brewster angle with a polarization photometer having 5 visible and near-infrared wavelength bands. We found that all leaf surfaces polarized incident light. Differences among species could be explained by variation in surface features. The results support our hypothesis that the polarized light is reflected by the leaf surface, not by its interior. Two mechanisms appeared responsible for the linearly polarized reflectance: (1) specular reflectance and (2) surface particle scattering. In most cases, large values of linearly polarized reflectance could be attributed to specular reflectance from the leaf surface. Attribution required knowledge of the optical dimensions of features on the leaf surface.

Grant, Lois↗
DOE OSTI2025

Testing for the Genomic Footprint of Conflict Between Life Stages in an Angiosperm and Moss Species

Abstract The maintenance of genetic variation by balancing selection is of considerable interest to evolutionary biologists. An important but understudied potential driver of balancing selection is antagonistic pleiotropy between diploid and haploid stages of the plant life cycle. Despite sharing a common genome, sporophytes (2n) and gametophytes (n) may undergo differential or even opposing selection. Theoretical work suggests antagonistic pleiotropy between life stages can generate balancing selection and maintain genetic variation. Despite the potential for far-reaching consequences of gametophytic selection, empirical tests of its pleiotropic effects (neutral, synergistic, or antagonistic) on sporophytes are generally lacking. Here, we examined the population genomic signals of selection across life stages in the angiosperm Rumex hastatulus and the moss Ceratodon purpureus. We compared gene expression between life stages and sexes, combined with neutral diversity statistics and the analysis of the distribution of fitness effects. In contrast to what would be predicted under balancing selection due to antagonistic pleiotropy, we found that unbiased genes between life stages were under stronger purifying selection, likely explained by a predominance of synergistic pleiotropy between life stages and strong purifying selection on broadly expressed genes. In addition, we found that 30% of candidate genes under balancing selection in R. hastatulus were located within inversion polymorphisms. Our findings provide novel insights into the genome-wide characteristics and consequences of plant gametophytic selection.

Evolutionary Biology↗
NASA NTRSDate not supplied

Plant Watering in Low Gravity: The Study of the Fluid Dynamic Characteristics of Lunar Regolith Simulant for the Application of Crop Production Systems Using Scaled Capillary Devices

Bioregenerative life support is key to sustaining human life on the surface of other celestial bodies for missions beyond Low Earth Orbit (LEO). One example of such life support includes crop production systems capable of producing both plants and fungi for astronaut consumption. There have been numerous efforts to design and deploy such systems; however, there have been persistent fundamental issues with the water delivery systems. This study aims to understand and model the fluid dynamics of crop production systems to inform engineers about the key parameters needed for the design of such systems. The primary objective is to validate and expand upon NASA’s previous study, the Plant Water Management (PWM) experiments, to understand the fluid phenomena present in substrate-based systems. The model will then be expanded to include parameters for changing the test material of potential growth media as well as the varying water demands of the crop throughout its different stages in its life cycle. Specifically, this study is focused on the viability of using lunar regolith for agricultural purposes. Terrestrial-based scaled capillary models will be utilized to mimic the fluid phenomena occurring due to the low gravity environment seen on the lunar surface. Ultimately, the study will model the fluid flow present in the lunar regolith simulant and inform researchers on how to incorporate the material into crop production systems on the lunar surface.

gravity↗
DOE OSTI2025

Existing Hydropower Assets (EHA) Capacity Plant Database, 2005-2024

Existing Hydropower Asset (EHA) Annual Capacity is a geospatial point-level dataset containing annual capacity over the years (2005-2024) and key characteristics of operational U.S. hydropower plants with 1 megawatt or greater of nameplate capacity. EIA form 860 and EHA are the primary sources of the derived data.

Johnson, Megan [ORNL] (ORCID:0000000290141741)↗
DOE OSTI2025

Existing Hydropower Assets (EHA) Annual Net Generation Plant Database, 2003-2024

Existing Hydropower Asset (EHA) Annual Net Generation is a geospatial point-level dataset containing annual net generation over time (2003-2024) and key characteristics of operational U.S. hydropower plants with 1 megawatt or greater of nameplate capacity. EIA 923 and EHA are the primary sources of the derived data. Pumped storage and hybrid plants are excluded.

Johnson, Megan [ORNL] (ORCID:0000000290141741)↗
DOE OSTI2024

Quantification of Native Lignin Structural Features with Gel–Phase 2D–HSQC 0 Reveals Lignin Structural Changes During Extraction

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature 1 H– 13 C Heteronuclear Single-Quantum Coherence Zero (HSQC 0 ) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration. By combining HSQC 0 measurements with yield measurements following depolymerisation, we can confirm the combinatorial nature of radical coupling reactions during biosynthesis leading to a random sequential organization of linkages within a largely linear lignin chain. Such analyses illustrate how this analytical method can greatly facilitate the study of native lignin structure, which can then be used for fundamental studies or to understand lignin depolymerization methods like reductive catalytic fractionation or aldehyde-assisted fractionation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Quantification of Native Lignin Structural Features with Gel–Phase 2D–HSQC 0 Reveals Lignin Structural Changes During Extraction

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature 1 H– 13 C Heteronuclear Single-Quantum Coherence Zero (HSQC 0 ) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration. By combining HSQC 0 measurements with yield measurements following depolymerisation, we can confirm the combinatorial nature of radical coupling reactions during biosynthesis leading to a random sequential organization of linkages within a largely linear lignin chain. Such analyses illustrate how this analytical method can greatly facilitate the study of native lignin structure, which can then be used for fundamental studies or to understand lignin depolymerization methods like reductive catalytic fractionation or aldehyde-assisted fractionation.

09 BIOMASS FUELS↗
DOE OSTI2024

The 2024 National Hydropower Map

A visualization of the geospatial distribution and characteristics of operational hydropower plants in the United States in 2024.

13 HYDRO ENERGY↗
DOE OSTI2026

The 2026 National Hydropower Map

A visualization of the geospatial distribution and characteristics of operational hydropower plants in the United States in 2026

Schmidt, Erik [Oak Ridge National Laboratory (ORNL↗
NASA NTRS1978

Elemental characteristics of aerosols emitted from a coal-fired heating plant

Size differentiated aerosols were collected downstream from a heating plant fueled with eastern coal and analyzed using particle induced X-ray emission technique. Based on aerosol masses collected in various size ranges, the aerosol size distribution is determined to be trimodal, with the three peaks centered at 0.54 microns, 4.0 microns, and 11.0 microns, respectively. Of the various trace elements present in the aerosols, sulphur is the only element that shows very strong concentration in the smallest size group. Iron is strongly concentrated in the 4.0 micron group. Potassium, calcium, and titanium also exhibit stronger concentration in the 4.0 micron group than any other group. Other trace elements - vanadium, chromium, manganese, nickel, copper, and barium - are equally divided between the 0.54 microns and the 4.0 microns groups. Apparently, all of the trace elements - except S - enter aerosols during the initial formation and subsequent condensation phases in the combustion process. Excess concentration of sulphur in the 0.54 microns group can only be accounted for by recondensation of sulphur vapors on the combustion aerosols and gas-to-particle phase conversion of sulfate vapors at the stack top.

Singh, J. J.↗