Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMOIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Plasmoid Formation and Strong Radiative Cooling in a Driven Magnetic Reconnection Experiment

Herein we present the first experimental study of plasmoid formation in a magnetic reconnection layer undergoing rapid radiative cooling, a regime relevant to extreme astrophysical plasmas. Two exploding aluminum wire arrays, driven by the Z machine, generate a reconnection layer (S L ≈ 120) in which the cooling rate far exceeds the hydrodynamic transit rate (τ hydro =τ cool > 100). The reconnection layer generates a transient burst of >1 keV x-ray emission, consistent with the formation and subsequent rapid cooling of the layer. Time-gated x-ray images show fast-moving (up to 50 km s –1 ) hotspots in the layer, consistent with the presence of plasmoids in 3D resistive magnetohydrodynamic simulations. X-ray spectroscopy shows that these hotspots generate the majority of Al K-shell emission (around 1.6 keV) prior to the onset of cooling, and exhibit temperatures (170 eV) much greater than that of the plasma inflows and the rest of the reconnection layer, thus providing insight into the generation of high-energy radiation in radiatively cooled reconnection events.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visible light observations of a dense plasmoid associated with a moving Type IV solar radio burst

A coronal transient rising above the eastern limb of the sun was observed simultaneously on April 27, 1980 by the Coronagraph/Polarimeter (C/P) aboard the Solar Maximum Mission spacecraft and by the Culgoora radioheliograph (CRH). The C/P observed an outward-moving loop transient followed by a plasmoid of dense ionized material, while the CRH observed several types of radio bursts, including a moving Type IV burst at 80 MHz whose position coincided with the bright plasmoid. An estimate of the reasonable lower limit of the electron density in the moving Type IV burst indicates that this burst could have resulted from emission at either the fundamental or the second harmonic of the plasma frequency. This is a new result because in the past it was thought that the density in the moving Type IV source region would be too low for plasma radiation.

Stewart, R. T.↗

Expansion of solar-terrestrial low-beta plasmoid

A magnetized plasma system confined inside a finite volume may expand (or contract) when its surrounding pressure changes. In this paper, two possible expanding processes of a low-beta plasmoid are discussed: (1) linear expansion and (2) expansion with fixed footpoints of field lines. The constant-zeta expansion, discussed in this paper, may maintain a low-beta plasmoid in a nearly force-free state during the expanding process. This simple model is applied to the magnetic clouds observed in the interplanetary space. The estimated scale size and expanding speed of the magnetic cloud are found to be in reasonable agreement with the observation. The energy conversion process is investigated: the free 'magnetic potential energy' stored in a magnetized system, which is pressed by external pressure, may be released to accelerate the plasma. The concept of a 'magnetic burst' is briefly discussed.

Yang, Wei-Hong↗

IMP-8 observations of traveling compression regions - New evidence for near-earth plasmoids and neutral lines

An examination of IMP-8 tail lobe magnetic field measurements has been conducted to determine whether the traveling compression region (TCR) phenomena detected by ISEE-3 in the distant geotail, and believed to be caused by tailward moving plasmoids, are present closer to the earth. The study produced 16 examples of TCRs at distances of X = -31 to -37 R(E). For two events considered in detail, TCRs were observed in close association with substorm growth phase signatures in the lobes. The lengths of these TCRs are estimated to be 8-12 R(E). The conclusion is that the IMP-8 TCR observations provide new evidence that small plasmoids and, hence, multiple reconnection neutral lines can sometimes exist earthward of X = -35 R(E).

Slavin, J. A.↗

Fast plasmoid formation in double arcades

The evolution of two neighboring nonsymmetric arcades with footpoint shearing profiles which can change in time is simulated in order to investigate the quasi-static evolution of a double arcade system. It is found that rapid forced reconnection can take place repeatedly, forming a series of plasmoids. A two-arcade system laterally confined by surrounding fluxes can develop instability with nonsymmetric footpoint shear, but the instability is significantly lower in comparison with the case in which the system is confined by a 'hard box' or periodic boundary conditions. The fast plasmoid formation process due to asymmetry switching is not due to the presence of simulation walls. The behavior of double arcades with asymmetry switching is described using equilibrium bifurcation diagrams with footpoint shear and degree of asymmetry, as two independent control parameters.

Finn, J. M.↗

Three-dimensional kinematic reconnection of plasmoids with nulls

The global nonlinear dynamics of magnetic field lines in plasmoids with a pair of nulls, where B = 0, is studied. The aim of this analysis is to describe the separatrix surfaces on which singularities can occur in ideal magnetohydrodynamics because of topological changes in the field. These separatrix surfaces should locate the boundary layers associated with 3D reconnection in the presence of resistivity or inertia. It is found that the field lines exhibit chaotic scattering with several properties in common with plasmoid models without nulls (in which one component of the magnetic field never changes sign). In particular, the singular surfaces can be fractal, implying complex current density structures down to the dissipation scale. These generic features are expected to exist in typical coronal magnetic geometries exhibiting three-dimensional reconnection and the formation of current sheets.

Lau, Yun-Tung↗

High Power Thruster Based on Inductive Magnetized Plasmoid Acceleration

Regardless of the power source, deep space missions will require both high specific impulse (greater than 500 s) and high thrust power (greater than 100kW). These high Isp thrusters will need to have high electrical efficiency (approx. 90%) and low specific mass (alpha approximately less than 10 kg/kW) as well. Additionally they should have high thrust to allow greater mission flexibility. All these requirements can potentially be achieved with the pulsed formation and acceleration of magnetically self-confined plasmoids commonly referred to as compact toroids (CTs). An electromagnetic plasma thruster based on CT acceleration makes an ideal candidate for a high power, high Isp thruster, since the CT is magnetically isolated from the accelerator so that there is no contact between the propellant and the accelerator. The transfer of momentum to the CT occurs through an electromagnetic interaction with the magnetic field. By maintaining an axial magnetic field gradient across it, the directed velocity of the CT can be increased indefinitely. In previous experiments carried out at the University of Washington, CT's of near milligram mass were accelerated to velocities of 250 km/s in a single pulse. The ejection of the plasmoid by an external axial field also avoids the serious problem of detachment, which would occur in thrusters that employ a magnetic mirror or magnetic nozzle. To employ the CT for propulsion, one must design, construct and test a plasma source that is capable of generating a self-confined plasma inductively, and to do it repeatedly at a sufficiently high rep rate. A repetitively pulsed 100 kW level FRC thruster was built and was operated for short bursts at a 10 kHz rep rate and will be described. Another regime for the FRC thruster however is to produce an FRC in a more conventional manner at high voltage and magnetic field. With the large energy transfer with each pulse, the rep rate for this approach is much lower (approximately 100 Hz). This is the approach that is being evaluated at MSFC in the FAST experiment. The purpose of this experiment is to build an FRC thruster, measure its performance characteristics e.g. specific impulse, thrust, and efficiency. This experiment will also be described as well as various mission scenarios that that are well matched for this type of propulsion.

Slough, John↗

Plasmoid Thruster for High Specific-Impulse Propulsion

A report discusses a new multi-turn, multi-lead design for the first generation PT-1 (Plasmoid Thruster) that produces thrust by expelling plasmas with embedded magnetic fields (plasmoids) at high velocities. This thruster is completely electrodeless, capable of using in-situ resources, and offers efficiencies as high as 70 percent at a specific impulse, I(sub sp), of up to 8,000 s. This unit consists of drive and bias coils wound around a ceramic form, and the capacitor bank and switches are an integral part of the assembly. Multiple thrusters may be gauged to inductively recapture unused energy to boost efficiency and to increase the repetition rate, which, in turn increases the average thrust of the system. The thruster assembly can use storable propellants such as H2O, ammonia, and NO, among others. Any available propellant gases can be used to produce an I(sub sp) in the range of 2,000 to 8,000 s with a single-stage thruster. These capabilities will allow the transport of greater payloads to outer planets, especially in the case of an I(sub sp) greater than 6,000 s.

Fimognari, Peter↗

First Detection of Plasmoids from Breakout Reconnection on the Sun

Transient collimated plasma ejections (jets) occur frequently throughout the solar corona, in active regions, quiet Sun, and coronal holes. Although magnetic reconnection is generally agreed to be the mechanism of energy release in jets, the factors that dictate the location and rate of reconnection remain unclear. Our previous studies demonstrated that the magnetic breakout model explains the triggering and evolution of most jets over a wide range of scales, through detailed comparisons between our numerical simulations and high-resolution observations. An alternative explanation, the resistive-kink model, invokes breakout reconnection without forming and explosively expelling a flux rope. Here we report direct observations of breakout reconnection and plasmoid formation during two jets in the fan-spine topology of an embedded bipole. For the first time, we observed the formation and evolution of multiple small plasmoids with bidirectional flows associated with fast reconnection in 3D breakout current sheets (BCSs) in the solar corona. The first narrow jet was launched by reconnection at the BCS originating at the deformed 3D null, without significant flare reconnection or a filament eruption. In contrast, the second jet and release of cool filament plasma were triggered by explosive breakout reconnection when the leading edge of the rising flux rope formed by flare reconnection beneath the filament encountered the preexisting BCS. These observations solidly support both reconnection-driven jet models: the resistive kink for the first jet, and the breakout model for the second explosive jet with a filament eruption.

Kumar, Pankaj↗

Plasmoids, Flows, and Jets During Magnetic Reconnection in a Failed Filament Eruption

We report a detailed analysis of a flare/failed eruption in Active Region 12018 on April 3, 2014, using observations from SDO/AIA, IRIS, STEREO and Hinode/SOT. Initially, we observed multiple jets originating from the cusp of a large coronal bright point (null-point topology) 1-2 hours prior to the slow rise of a filament. The subsequent filament eruption, which was outside the IRIS field of view, was accompanied by a flare but remained confined. Multiple blobs were observed, most likely formed in a breakout current sheet near the cusp during the filament slow rise. During the explosive flare reconnection phase, plasmoids also appeared and moved bidirectionally (speed=100-285 km/s, periodicity~70 s) in the flare current sheet below the erupting filament. The tiny jet-like features in the fan loops were detected during the filament slow-rise/pre-flare phase associated with slow interchange/breakout reconnection at 3D null followed by multiple plasmoids moving along the fan-loops/separatrix. We will discuss why our interpretation is more robust than the nanoflare heating/flows suggested by Antolin et al. (2021).

P. Kumar↗

Flare Ribbon Signatures of Reconnection Plasmoids

Solar flares are explosive space weather events that rapidly convert stored magnetic energy into bulk motion, plasma heating, and particle acceleration. Understanding the structure and dynamics of the magnetic reconnection that powers flares is critical for predicting the energy release. In particular, the amount of energy transferred to energetic particles is thought to be highly dependent on whether the reconnection is primarily turbulent (e.g., plasmoid dominated) or instead laminar. We present high-resolution MHD simulations of three-dimensional reconnection in an eruptive flare and compare the results to recent data. Although flare reconnection is challenging to observe directly in the corona, highly detailed constraints on its dynamics can be obtained from observations of flare ribbons that track the chromospheric footpoints of newly reconnected field lines. The analogues of flare ribbons in our simulations are identified by tracking discontinuous changes in field-line magnetic connectivity due to the reconnection. In our highest-resolution calculations, we find that these ribbon analogues are highly structured and exhibit many ‘whorl’ patterns that are linked to turbulent plasmoids in the reconnecting current sheet. Flare ribbon fine structure therefore reveals crucial information about the fundamental turbulent vs. laminar nature of the reconnection. We discuss the implications of these results for understanding reconnection-driven energy release throughout the heliosphere.

J. T. Dahlin↗

Plasmoid solutions of the Hahm–Kulsrud–Taylor equilibrium model

The Hahm–Kulsrud (HK) [T. S. Hahm and R. M. Kulsrud, Phys. Fluids 28, 2412 (1985)] solutions for a magnetically sheared plasma slab driven by a resonant periodic boundary perturbation illustrate fully shielded (current sheet) and fully reconnected (magnetic island) responses. On the global scale, reconnection involves solving a magnetohydrodynamic (MHD) equilibrium problem. In systems with a continuous symmetry, such MHD equilibria are typically found by solving the Grad–Shafranov equation, and in slab geometry the elliptic operator in this equation is the 2-D Laplacian. Thus, assuming appropriate pressure and poloidal current profiles, a conformal mapping method can be used to transform one solution into another with different boundary conditions, giving a continuous sequence of solutions in the form of partially reconnected magnetic islands (plasmoids) separated by Syrovatsky current sheets. The two HK solutions appear as special cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of the merging of two colliding field reversed configuration plasmoids

The field reversed configuration (FRC) is one of the candidate plasma targets for the magneto-inertial fusion, and a high temperature FRC can be formed by using the collision-merging technology. Although the merging process and mechanism of FRC are quite complicated, it is thinkable to build a simple model to investigate the macroscopic equilibrium parameters including the density, the temperature and the separatrix volume, which may play an important role in the collision-merging process of FRC. It is quite interesting that the estimates of the related results based on our simple model are in agreement with the simulation results of a two-dimensional magneto-hydrodynamic code (MFP-2D), which has being developed by our group since the last couple of years, while these results can qualitatively fit the results of C-2 experiments by Tri-alpha energy company. On the other hand, the simple model can be used to investigate how to increase the density of the merged FRC. It is found that the amplification of the density depends on the poloidal flux-increase factor and the temperature increases with the translation speed of two plasmoids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Through the ring of fire: γ-ray variability in blazars by a moving plasmoid passing a local source of seed photons

Blazars exhibit flares across the electromagnetic spectrum. Many γ-ray flares are highly correlated with flares detected at optical wavelengths; however, a small subset appears to occur in isolation, with little or no variability detected at longer wavelengths. These “orphan” γ-ray flares challenge current models of blazar variability, most of which are unable to reproduce this type of behavior. We present numerical calculations of the time-variable emission of a blazar based on a proposal by Marscher et al. to explain such events. In this model, a plasmoid (“blob”) propagates relativistically along the spine of a blazar jet and passes through a synchrotron-emitting ring of electrons representing a shocked portion of the jet sheath. This ring supplies a source of seed photons that are inverse-Compton scattered by the electrons in the moving blob. The model includes the effects of radiative cooling, a spatially varying magnetic field, and acceleration of the blob's bulk velocity. Synthetic light curves produced by our model are compared to the observed light curves from an orphan flare that was coincident with the passage of a superluminal knot through the inner jet of the blazar PKS 1510–089. In addition, we present Very Long Baseline Array polarimetric observations that point to the existence of a jet sheath in PKS 1510–089, thus providing further observational support for the plausibility of our model. An estimate of the bolometric luminosity of the sheath within PKS 1510–089 is made, yielding L{sub sh}∼3×10{sup 45} erg s{sup −1}. This indicates that the sheath within PKS 1510–089 is potentially a very important source of seed photons.

79 ASTRONOMY AND ASTROPHYSICS↗

Large-volume flux closure during plasmoid-mediated reconnection in coaxial helicity injection

A large-volume flux closure during transient coaxial helicity injection (CHI) in NSTX-U is demonstrated through resistive magnetohydrodynamics (MHD) simulations. Several major improvements, including the improved positioning of the divertor poloidal field coils, are projected to improve the CHI start-up phase in NSTX-U. Simulations in the NSTX-U configuration with constant in time coil currents show that with strong flux shaping the injected open field lines (injector flux) rapidly reconnect and form large volume of closed flux surfaces. This is achieved by driving parallel current in the injector flux coil and oppositely directed currents in the flux shaping coils to form a narrow injector flux footprint and push the injector flux into the vessel. As the helicity and plasma are injected into the device, the oppositely directed field lines in the injector region are forced to reconnect through a local Sweet-Parker type reconnection, or to spontaneously reconnect when the elongated current sheet becomes MHD unstable to form plasmoids. In these simulations for the first time, it is found that the closed flux is over 70% of the initial injector flux used to initiate the discharge. Furthermore, these results could work well for the application of transient CHI in devices that employ super conducting coils to generate and sustain the plasma equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasmoid-mediated reconnection during nonlinear peeling–ballooning edge-localized modes

Abstract Plasmoid-mediated reconnection is investigated for nonlinear peeling–ballooning edge-localized modes (P-B ELMs). The formation of current sheets and the transition to 3D current sheet instability is demonstrated through fully nonlinear resistive MHD simulations of P-B ELMs in DIII-D discharges. Large-scale axisymmetric current sheets, as well as small-scale poloidally extended current sheets, are formed as the coherent P-B ELM filaments nonlinearly evolve. It is observed that, at high Lundquist numbers, these current sheets break during a reconnection burst, i.e. a secondary exponential growth of intermediate modes followed by relaxation due to the suppression of P-B drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large-volume flux closure during plasmoid-mediated reconnection in coaxial helicity injection

A large-volume flux closure during transient coaxial helicity injection (CHI) in NSTX-U is demonstrated through resistive magnetohydrodynamics (MHD) simulations. Several major improvements, including the improved positioning of the divertor poloidal field coils, are projected to improve the CHI start-up phase in NSTX-U. Simulations in the NSTX-U configuration with constant in time coil currents show that with strong flux shaping the injected open field lines (injector flux) rapidly reconnect and form large volume of closed flux surfaces. This is achieved by driving parallel current in the injector flux coil and oppositely directed currents in the flux shaping coils to form a narrow injector flux footprint and push the injector flux into the vessel. As the helicity and plasma are injected into the device, the oppositely directed field lines in the injector region are forced to reconnect through a local Sweet–Parker type reconnection, or to spontaneously reconnect when the elongated current sheet becomes MHD unstable to form plasmoids. In these simulations for the first time, it is found that the closed flux is over 70% of the initial injector flux used to initiate the discharge. These results could work well for the application of transient CHI in devices that employ super conducting coils to generate and sustain the plasma equilibrium.

Current Drive↗