Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLUTONIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Surrogate Measurements of Actinide (n,2n) Cross Sections with NeutronSTARS

Directly measuring (n,2n) cross sections on short-lived actinides presents a number of experimental challenges. The surrogate reaction technique is an experimental method for measuring cross sections on short-­lived isotopes, and it provides a unique solution for measuring (n,2n) cross sections. This technique involves measuring a charged-­particle reaction cross section, where the reaction populates the same compound nucleus as the reaction of interest. To perform these surrogate (n,2n) cross section measurements, a silicon telescope array has been placed along a beam line at the Texas A&M University Cyclotron Institute, which is surrounded by a large tank of gadolinium-doped liquid scintillator, which acts as a neutron detector. The combination of the charge-particle and neutron-detector arrays is referred to as NeutronSTARS. In the analysis procedure for calculating the (n,2n) cross section, the neutron detection efficiency and time structure plays an important role. Due to the lack of availability of isotropic, mono-energetic neutron sources, modeling is an important component in establishing this efficiency and time structure. This report describes the NeutronSTARS array, which was designed and commissioned during this project. It also describes the surrogate reaction technique, specifically referencing a 235 U(n,2n) commissioning measurement that was fielded during the past year. Advanced multiplicity analysis techniques have been developed for this work, which should allow for efficient analysis of 241 Pu(n,2n) and 239 Pu(n,2n) cross section measurements

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Organic Separation Test Results

Separable organics have been defined as “those organic compounds of very limited solubility in the bulk waste and that can form a separate liquid phase or layer” (Smalley and Nguyen 2013), and result from three main solvent extraction processes: U Plant Uranium Recovery Process, B Plant Waste Fractionation Process, and Plutonium Uranium Extraction (PUREX) Process. The primary organic solvents associated with tank solids are TBP, D2EHPA, and NPH. There is concern that, while this organic material is bound to the sludge particles as it is stored in the tanks, waste feed delivery activities, specifically transfer pump and mixer pump operations, could cause the organics to form a separated layer in the tank farms feed tank. Therefore, Washington River Protection Solutions (WRPS) is experimentally evaluating the potential of organic solvents separating from the tank solids (sludge) during waste feed delivery activities, specifically the waste mixing and transfer processes. Given the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste acceptance criteria per the Waste Feed Acceptance Criteria document (24590-WTP-RPT-MGT-11-014) that there is to be “no visible layer” of separable organics in the waste feed, this would result in the batch being unacceptable to transfer to WTP. This study is of particular importance to WRPS because of these WTP requirements.

complexants↗

Laser-Induced Plasmas of Plutonium Dioxide in a Double-Walled Cell

Plutonium research has been stifled by the significant number of administrative controls and safety procedures, space and instrumentation limitations in radiological gloveboxes, and the potential for personnel and equipment contamination. To address the limited number of spectroscopic studies in Pu-bearing compounds in the current scientific literature, this work presents the use of double-walled cells (DWCs) in “clean” buildings/laboratories as an alternative to research in radiological gloveboxes. This study reports the first laser-induced breakdown spectroscopy (LIBS) experiments of a PuO 2 pellet contained within a DWC, where the formation of elemental (atomic and ionic) species as well as the evolution from elemental to molecular products (Pu x O y ) was measured. Raman spectroscopy was also used to characterize the surface of the ablated pellet and the particulates deposited on the window of the inner cell. The full width half-maximum of the T 2g band enabled us to obtain an estimate of the temperature at the pellet surface after the ablation pulse and the particulates based on the crystal lattice disorder. Particulates deposited on the window of the DWC during laser ablation were characterized using scanning electron microscopy, where molten irregular particulates and spheroids were observed. This exciting research conducted in a DWC describes our initial attempts to incorporate LIBS in the arsenal of spectroscopic tools for nuclear forensics applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Potential safety impacts associated with production of gaseous PuF 6 due to reactions between 3013-compliant PuO 2 with Novec TM 1230 at temperature

A part of the NNSA/SRNS Surplus Plutonium Disposition (SPD) project is a planned expansion of an existing facility with capabilities to handle, process, package, and characterize large amounts of plutonium oxide materials for permanent disposition at WIPP. The facility design for this future processing capability will include glovebox operations, HEPA filters, and exhaust/ventilation systems. An NNSA review of the facility support systems included comments on the potential residual reactivity of previously-stabilized PuO 2 , and on the possibility of chemical interactions between stabilized PuO 2 and a new fire suppressant (Novec TM 1230), a replacement for chlorinated/brominated compounds such as HALON TM , to be employed in the event of a room/glovebox fire where PuO 2 will be processed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Neptunium Thiophosphate Chemistry: Intermediate Behavior between Uranium and Plutonium

Black crystals of Np(PS4), Np(P2S6)2, K11Np7(PS4)13, and Rb11Np7(PS4)13 have been synthesized by the reactions of Np, P2S5, and S at 1173 and 973 K; Np, K2S, P, and S at 773 K; and Np, Rb2S3, P, and S at 823 K, respectively. The structures of these compounds have been characterized by single-crystal X-ray diffraction methods. Np(PS4) adopts a three-dimensional structure with Np atoms coordinated to eight S atoms from four bidentate PS4 3 ligands in a distorted square antiprismatic arrangement. Np(PS4) is isostructural to Ln(PS4) (Ln = LaNd, Sm, GdEr). The structure of Np(P2S6)2 is constructed from three interpenetrating diamondtype frameworks with Np atoms coordinated to eight S atoms from four bidentate P2S6 2 ligands in a distorted square antiprismatic geometry. The centrosymmetric P2S6 2 anion comprises two PS2 groups connected by two bridging S centers. Np(P2S6)2 is isostructural to U(P2S6)2. A11Np7(PS4)13 (A = K, Rb) adopts a threedimensional channel structure built from interlocking [Np7(PS4)13]11-screw helices with A cations residing in the channels. The structure of A11Np7(PS4)13 includes four crystallographically independent Np atoms. Three are connected to eight S atoms in bicapped trigonal prisms. The other Np atom is connected to nine S atoms in a tricapped trigonal prism. A11Np7(PS4)13 is isostructural to A11U7(PS4)13. From NpS bond distances and charge-balance, we infer that Np is trivalent in Np(PS4) and tetravalent in Np(P2S6)2 and A11Np7(PS4)13.Np exhibits a behavior intermediate betweenUand Pu in its thiophosphate chemistry.

Jin, Geng Bang↗

Synthesis and Characterization of Novel Actinide Compounds (LDRD External Report Summary)

It is important to gain new understanding of actinides in order to understand the fate of these elements in the environment and the factors that contribute to actinide-lanthanide extraction selectivity. Detailed structural, magnetic, and electronic studies of novel actinide compounds can provide useful information on bonding behavior to guide the development of novel separation and environmental remediation strategies. Development of new actinide compounds remains a relatively open area to study due to the numerous challenges faced when performing chemical synthesis with radioactive materials. In this LDRD, we sought to synthesize and characterize single crystals of novel polyoxometalates that selectively encapsulate plutonium and uranium. We were successful in preparation of [U III Pd II 12 (AsPh) 8 O 32 ] 5⁻ ; the first actinide-based polyoxopalladate.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

REACTIONS OF SODIUM PEROXIDE WITH COMPONENTS OF LEGACY PLUTONIUM MATERIALS

Plutonium oxide (PuO{sub 2}) calcined at >900 C resists dissolution in nitric acid (HNO{sub 3})-potassium fluoride (KF) solutions, a common method for their dissolution. The Savannah River National Laboratory (SRNL) has developed an alternate method for large samples of PuO{sub 2}-bearing materials using sodium peroxide (Na{sub 2}O{sub 2}) fusion as a pretreatment. The products of the reaction between Na{sub 2}O{sub 2} and PuO{sub 2} have been reported in the literature. As part of the SRNL development effort, additional data about the reaction between Na{sub 2}O{sub 2} and PuO{sub 2} were required. Also needed were data concerning the reaction of Na{sub 2}O{sub 2} with other components that may be present in the feed materials. Sodium peroxide was reacted with aluminum metal (Al), beryllium metal (Be), graphite, potassium chloride (KCl), magnesium chloride (MgCl{sub 2}), and calcium chloride (CaCl{sub 2}). The paper reports and discusses the reaction products of these and related compounds with Na{sub 2}O{sub 2}.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Neutron capture by fissile and fertile actinide targets

For fissile actinide targets {sup 233}U, {sup 235}U and {sup 239}Pu the capture cross sections are strongly influenced by the target spin, fission transition states spectroscopy and fission/{gamma}-emission competition of the compound nuclides. The capture cross sections were obtained via a consistent description of fission and elastic/inelastic scattering, (n,{gamma}f) reaction being included.For neutron capture reactions on even-even U, Pu and Cm nuclei the methods, proven in case of {sup 232}Th(n,{gamma}) and {sup 238}U(n,{gamma}) data analysis are used. Calculated {sup 240}Pu(n,{gamma}) and {sup 244}Cm(n,{gamma}) reaction cross sections shapes are much similar to that, observed for the {sup 238}U(n,{gamma}) and {sup 232}Th(n,{gamma}) reactions. Differences are due to fission and neutron emission competition, which depends on the (Z,N)-composition of the compound nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multiplicity Counting

This set of slides begins by giving background and a review of neutron counting; three attributes of a verification item are discussed: 240 Pu eff mass; α, the ratio of (α,n) neutrons to spontaneous fission neutrons; and leakage multiplication. It then takes up neutron detector systems – theory & concepts (coincidence counting, moderation, die-away time); detector systems – some important details (deadtime, corrections); introduction to multiplicity counting; multiplicity electronics and example distributions; singles, doubles, and triples from measured multiplicity distributions; and the point model: multiplicity mathematics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Model development and data uncertainty integration

The effect of data uncertainties is discussed, with the epithermal neutron multiplicity counter as an illustrative example. Simulation using MCNP6, cross section perturbations and correlations are addressed, along with the effect of the 240 Pu spontaneous fission neutron spectrum, the effect of P(ν) for 240 Pu spontaneous fission, and the effect of spontaneous fission and (α,n) intensity. The effect of nuclear data is the product of the initial uncertainty and the sensitivity -- both need to be estimated. In conclusion, a multi-parameter variation method has been demonstrated, the most significant parameters are the basic emission rates of spontaneous fission and (α,n) processes, and uncertainties and important data depend on the analysis technique chosen.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Accelerated-Aging of Shipping Package O-Rings for Pu Storage

The Savannah River Site (SRS) is storing surplus plutonium (Pu) materials in the K-Area Materials Storage (KAMS) facility. The Pu materials are packaged per the DOE 3013 Standard. The nested, welded 300 series stainless steel 3013 containers are transported to KAMS in Type B shipping packages and subsequently stored in the same packages. These type B shipping packages consist of double containment vessels sealed with dual O-rings. The O-ring compound is Parker Seals V0835-75, based on Viton ® GLT fluoroelastomer. This work evaluates the performance of the V0835-75 O-rings at accelerated-aging conditions. The results will be used to develop a lifetime prediction model for O-rings in KAMS.

36 MATERIALS SCIENCE↗

LIFETIME PREDICTION FOR MODEL 9975 O-RINGS IN KAMS

The Savannah River Site (SRS) is currently storing plutonium materials in the K-Area Materials Storage (KAMS) facility. The materials are packaged per the DOE 3013 Standard and transported and stored in KAMS in Model 9975 shipping packages, which include double containment vessels sealed with dual O-rings made of Parker Seals compound V0835-75 (based on Viton{reg_sign} GLT). The outer O-ring of each containment vessel is credited for leaktight containment per ANSI N14.5. O-ring service life depends on many factors, including the failure criterion, environmental conditions, overall design, fabrication quality and assembly practices. A preliminary life prediction model has been developed for the V0835-75 O-rings in KAMS. The conservative model is based primarily on long-term compression stress relaxation (CSR) experiments and Arrhenius accelerated-aging methodology. For model development purposes, seal lifetime is defined as a 90% loss of measurable sealing force. Thus far, CSR experiments have only reached this target level of degradation at temperatures {ge} 300 F. At lower temperatures, relaxation values are more tolerable. Using time-temperature superposition principles, the conservative model predicts a service life of approximately 20-25 years at a constant seal temperature of 175 F. This represents a maximum payload package at a constant ambient temperature of 104 F, the highest recorded in KAMS to date. This is considered a highly conservative value as such ambient temperatures are only reached on occasion and for short durations. The presence of fiberboard in the package minimizes the impact of such temperature swings, with many hours to several days required for seal temperatures to respond proportionately. At 85 F ambient, a more realistic but still conservative value, bounding seal temperatures are reduced to {approx}158 F, with an estimated seal lifetime of {approx}35-45 years. The actual service life for O-rings in a maximum wattage package likely lies higher than the estimates due to the conservative assumptions used for the model. For lower heat loads at similar ambient temperatures, seal lifetime is further increased. The preliminary model is based on several assumptions that require validation with additional experiments and longer exposures at more realistic conditions. The assumption of constant exposure at peak temperature is believed to be conservative. Cumulative damage at more realistic conditions will likely be less severe but is more difficult to assess based on available data. Arrhenius aging behavior is expected, but non-Arrhenius behavior is possible. Validation of Arrhenius behavior is ideally determined from longer tests at temperatures closer to actual service conditions. CSR experiments will therefore continue at lower temperatures to validate the model. Ultrasensitive oxygen consumption analysis has been shown to be useful in identifying non-Arrhenius behavior within reasonable test periods. Therefore, additional experiments are recommended and planned to validate the model.

42 ENGINEERING↗

Two Neptunium(III) Mellitate Coordination Polymers: Completing the Series Np–Cf of Trans-Uranic An(III) Mellitates

For this work, two neptunium(III) mellitates, 237 Np 2 (mell)(H 2 O) 9 ·1.5H 2 O (Np-1α) and 237 Np 2 (mell)(H 2 O) 8 ·2H 2 O (Np-1β), have been synthesized from 237 NpCl 4 (dme) 2 by reduction with KC 8 and subsequent reaction with an aqueous solution of mellitic acid (H 6 mell). Characterization by single-crystal X-ray crystallography and UV–vis–NIR spectroscopy confirms that the neptunium is in its +3 oxidation state and both polymorphs are isostructural to the previously reported plutonium mellitates. Of the two morphologies, Np-1α is indefinitely stable in air, while Np-1β slowly oxidizes over several months. This is due to the change in the energy of the metal-ligand charge-transfer absorption exhibited by these compounds attributed to differing numbers of carboxylate bonds to Np(III), where in Np-1β the energy is low enough to result in spontaneous oxidation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The role of surfaces, chemical interfaces, and disorder on plutonium incorporation in pyrochlores

Pyrochlores, a class of complex oxides with formula A 2 B 2 O 7 , are one of the candidates for nuclear waste encapsulation, due to the natural occurrence of actinide-bearing pyrochlore minerals and laboratory observations of high radiation tolerance. In this work, we use atomistic simulations to determine the role of surfaces, chemical interfaces, and cation disorder on the plutonium immobilization properties of pyrochlores as a function of pyrochlore chemistry. We find that both Pu 3+ and Pu 4+ segregate to the surface for the four low-index pyrochlore surfaces considered, and that the segregation energy varies with the chemistry of the compound. We also find that pyrochlore/pyrochlore bicrystals A 2 B 2 O 7 /A 2 'B 2 'O 7 can be used to immobilize Pu 3+ and Pu 4+ either in the same or separate phases of the compound, depending on the chemistry of the material. Finally, we find that Pu 4+ segregates to the disordered phase of an order/disorder bicrystal, driven by the occurrence of local oxygen-rich environments. However, Pu 3+ is weakly sensitive to the oxygen environment, and therefore only slightly favors the disordered phase. This behavior suggests that, at some concentration, Pu incorporation can destabilize the pyrochlore structure. Together, these results provide new insight into the ability of pyrochlore compounds to encapsulate Pu and suggest new considerations in the development of waste forms based on pyrochlores. Particularly, the phase structure of a multi-phase pyrochlore composite can be used to independently getter decay products based on their valence and size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Possibilities of production of neutron-deficient isotopes of U, Np, Pu, Am, Cm, and Cf in complete fusion reactions

Within the dinuclear system model we analyze the production of yet unknown neutron-deficient isotopes of U, Np, Pu, Am, Cm, and Cf in various complete fusion reactions. Different deexcitation channels of the excited compound nucleus are treated. The results are obtained without special adjustment to the selected evaporation channel. The fusion probability is an important ingredient of the excitation function. The results are in good agreement with the available experimental data. The alpha decay half-life times in the neutron-deficient actinides are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluation of Properties for Microsample Identification

A study was conducted to determine if individual particle characteristics could be used to identify particles of interest, sub-samples, from bulk post-detonation debris. Three archived post-detonation debris samples were used for this effort. Particles from these samples were identified as active (produced fission tracks), and inactive (did not produce fission tracks), as the first defining characteristic. Morphology was the secondary characteristic to select particles for further study, i.e. spherical/non-spherical. Once particles were identified and isolated, they were characterized by optical microscopy for size in µm, number of fission tracks, morphology, transmitted light color, and reflected light color. Particles were then analyzed by scanning electron microscopy for morphology, elemental content, and compound identification. Raman spectroscopy was attempted on five particles with indeterminate results due to environmental mixing (heterogeneity) during the events of particle formation. Once all non-destructive analyses were completed all particles were analyzed by thermal ionization mass spectrometry to determine isotopic atom percents of plutonium and uranium, and an estimate of atoms of plutonium and uranium in each particle. An estimate of the ratio of uranium to plutonium was also obtained (U/Pu). Data analytics of the data from the particles showed that combining characteristics of the particles have a high probability of identifying particles of interest from bulk post-detonation debris samples. Please note that this version of the report is an abridged version of the full report (Wagnon et al. 2025) that has been edited to be appropriate for public release.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Development of a CALPHAD Thermodynamic Database for Pu-U-Fe-Ga Alloys

The interaction of actinides and actinide alloys such as the δ-stabilized Pu-Ga alloy with iron is of interest to understand the impurity effects on phase stability. A newly developed and self-consistent CALPHAD thermodynamic database is presented which covers the elements: Pu, U, Fe, Ga across their whole composition and temperature ranges. The phase diagram and thermodynamic properties of plutonium-iron (Pu-Fe) and uranium-iron (U-Fe) systems are successfully reassessed, with emphasis on the actinide rich side. Density functional theory (DFT) calculations are performed to validate the stability of the stoichiometric (Pu,U) 6 Fe and (Pu,U)Fe 2 compounds by computing their formation enthalpies. These data are combined to construct the Pu-U-Fe ternary phase diagram. The thermodynamic assessment of Fe-Ga is presented for the first time and application to the quaternary Pu-U-Fe-Ga system is discussed.

36 MATERIALS SCIENCE↗

Final Report for Grant BES ER-15522. Actinide Transition-Metal Chalcogenides and Pnictides

In essence, we have contributed significantly to the solid-state chemistry of thorium, uranium, and neptunium, with specific emphasis on the chalcogenides of these elements. The thorium and uranium chemistry was done at Northwestern University; that of neptunium was done in collaboration with Dr. Lynda Soderholm at Argonne National Laboratory. Despite the difficulties of synthesizing neptunium compounds in the environment at Argonne National Laboratory we initiated a solid-state research effort that has resulted in the publication of 10 papers on neptunium chemistry. We have demonstrated that the solid-state chemistry of neptunium, though sometimes resembling analogous uranium chemistry and sometimes resembling analogous plutonium chemistry, has a unique chemistry of its own.

36 MATERIALS SCIENCE↗