Search NASA⌕ Search

SEARCH · Search NASA

Results for “PS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Detection of a Cobalt-Containing Interphase at the Li 6 PS 5 Cl-NMC111 Interface by In Situ μ XANES and EIS

Sulfide electrolyte all-solid-state lithium batteries (ASLBs) with uncoated Li-Ni x Mn y Co 1–x–y O 2 (NMC) cathodes suffer from a large capacity loss during initial cycling and an increase in cell impedance. Decomposition reactions are known to occur at the Li 6 PS 5 Cl-NMC111 interface due to incompatibility between the two materials. If a stabilizing coating is applied to the NMC, it delivers full capacity during initial charge. However, the loss in capacity during discharge still occurs. The interface was studied by μ XANES and through EIS analysis. A chemically-formed interphase was detected by μ XANES, evident from reduction of Co at an uncoated NMC particle surface. This interphase was produced by decomposition at rest. To study the effect of the interphase on electrochemically active surface area, piecewise in situ EIS was performed and the data was modeled using a transmission line model (TLM). The charge transfer resistance R CT was used to estimate the volume specific active surface area (a act ). The median value for a act was 296 cm –1 , a factor of 7.5 lower than the theoretical value of 2216 cm –1 . This provided evidence of a lower electrochemically active surface area in the ASLB.

36 MATERIALS SCIENCE↗

Streaked Sub-ps-resolution X-ray Line Shapes and Implications for Solid-density Plasma Dynamics

A high-resolution x-ray spectrometer was coupled with an ultrafast x-ray streak camera to produce time-resolved line shape spectra measured from hot, solid-density plasmas. A Bragg crystal was placed near a laser-produced plasma to maximize throughput; alignment tolerances were established by raytracing. The streak camera produced single-shot time-resolved spectra, heavily sloped due to photon time-of-flight differences, with sufficient reproducibility to accumulate photon statistics. The images are time-calibrated by the slope of streaked spectra and dewarped to generate spectra emitted at different times defined at the source. The streaked spectra demonstrate the evolution of spectral shoulders and other features on ps timescales, showing the feasibility of plasma parameter measurements on the rapid timescales necessary to study high-energy-density plasmas.

High-energy-density plasmas↗

PS-Samp (Phase-Space Sampling)

PS-Samp is a software that reduces a given dataset by pruning data. Data is downselected such that it uniformly spans the phase-space, thereby ensuring that the full dataset is correctly represented. The algorithm relies on estimating the probability map of the data and using it to construct an acceptance probability. The software is designed to handle very large data sets.

Hassanaly, Malik↗

Optical Differentiation and Multimillijoule ~150 ps Pulse Generation in a Regenerative Amplifier with a Temperature-Tuned Intracavity Volume Bragg Grating

An optical differentiation in a regenerative amplifier with a temperature-tuned volume Bragg grating (VBG) as an intracavity spectral filter is demonstrated for the first time, to the author’s knowledge. 12 mJ ~ 150 ps pulses with a TEM00 beam profile have been generated at the 5 Hz repetition rate in the nanosecond-pulse-seeded regenerative amplifier with a VBG that is temperature detuned from the central wavelength.

Okishev, A V↗

Demonstration of a 2 ps, 5 TW peak power, long-wave infrared laser based on chirped-pulse amplification with mixed-isotope CO 2 amplifiers 2 amplifiers

We report generation of 5 TW peak power in a 2 ps pulse at 9.2 µm via chirped-pulse amplification (CPA) in mixed-isotope high-pressure CO 2 laser amplifiers. This represents the highest peak power in a single picosecond pulse format and the shortest pulse at terawatt peak power ever achieved in the long-wave infrared (LWIR) spectral range. Maximum demonstrated energy of the compressed pulse is 14 J and minimum period between shots is 20 s. The successful implementation of the chirped pulse amplification technique in a short-pulse gas laser opens a route to development of LWIR laser facilities with tens of terawatts of peak power, thus approaching the number of photons per optical cycle of current near-infrared laser systems based on solid-state active media.

43 PARTICLE ACCELERATORS↗

Performance Analysis of Phase 2 Tracker Upgrade Ps Module before and after Irradiation

The Large Hadron Collider will undergo a luminosity upgrade targeting a peak instantaneous luminosity ranging from 5–7.5×1034 cm−2s−1. The ambitious goal of the High Luminosity LHC is to achieve a total of 3000–4000 fb−1 of proton-proton collisions at a center-of-mass energy of 13–14 TeV by 2029. To cope with such challenging environmental conditions, the outer tracker of the CMS experiment will be upgraded using closely spaced silicon sensors (pixels and strips) to provide tracking information at the Level-1 trigger. A PS-Module, composed of both a pixel and a strip sensor, was tested at the Fermilab Test-Beam Facility to evaluate its ability to provide accurate tracking information, Pt discrimination capabilities, and optimal performance at the irradiation levels expected after being exposed to the harsh conditions of the High Luminosity LHC. The results of the test and the comparison of the module performance before and after irradiation will be presented in this poster

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis and Grading of the Test Performance of PS Modules for the CMS Phase-2 Outer Tracker Upgrade

The Outer Tracker of the CMS experiment provides information about the trajectory of charged particles produced in proton-proton collisions at the LHC. During the High Luminosity LHC upgrade, scheduled for the late 2020s, the Outer Tracker will be replaced with new modules capable of transmitting data to the L1 Trigger. These modules are being assembled at several facilities around the world, including Fermilab, necessitating coordinated standards of module quality. Here I discuss the development of POTATO (Phase-2 Outer Tracker Analyzer of Test Outputs), a C++ software which provides a standardized procedure for analyzing and grading test results of the Outer Tracker modules. The particular focus of this poster is on the analysis and grading of the PS (pixel-strip) modules in POTATO.

Riggall, Caroline↗

Analysis and Grading of the Test Performance of PS Modules for the CMS Phase-II Outer Tracker Upgrade

The Outer Tracker detector of the Compact Muon Solenoid (CMS) experiment provides information about the trajectory of charged particles produced in proton-proton collisions at the Large Hadron Collider (LHC). During the High Luminosity LHC upgrade, scheduled for the late 2020s, the Outer Tracker will be replaced with new modules capable of transmitting data to the L1 Trigger. These modules are being assembled at several facilities around the world, including Fermilab, necessitating coordinated standards of module quality. Here I discuss the development of POTATO (Phase-II Outer Tracker Analyzer of Test Outputs), a C++ software which provides a standardized procedure for analyzing and grading test results of the Outer Tracker modules. The particular focus of this paper is on the analysis and grading of the PS (pixel-strip) modules in POTATO.

43 PARTICLE ACCELERATORS↗

Substrate-independent expression of key functional genes in Cycloclasticus pugetii strain PS-1 limits their use as markers for PAH biodegradation

Microbial degradation of petroleum hydrocarbons is a crucial process for the clean-up of oil-contaminated environments. Cycloclasticus spp. are well-known polycyclic aromatic hydrocarbon (PAH) degraders that possess PAH-degradation marker genes including rhd3α, rhd2α, and pahE. However, it remains unknown if the expression of these genes can serve as an indicator for active PAH degradation. Here, we determined transcript-to-gene (TtG) ratios with (reverse transcription) qPCR in cultures of Cycloclasticus pugetii strain PS-1 grown with naphthalene, phenanthrene, a mixture of these PAHs, or alternate substrates (i.e., no PAHs). Mean TtG ratios of 1.99 × 10 −2 , 1.80 × 10 −3 , and 3.20 × 10 −3 for rhd3α, rhd2α, and pahE, respectively, were measured in the presence or absence of PAHs. The TtG values suggested that marker-gene expression is independent of PAH degradation. Measurement of TtG ratios in Arctic seawater microcosms amended with water-accommodated crude oil fractions, and incubated under in situ temperature conditions (i.e., 1.5°C), only detected Cycloclasticus spp. rhd2α genes and transcripts (mean TtG ratio of 4.15 × 10 −1 ). The other marker genes—rhd3α and pahE—were not detected, suggesting that not all Cycloclasticus spp. carry these genes and a broader yet-to-be-identified repertoire of PAH-degradation genes exists. The results indicate that the expression of PAH marker genes may not correlate with PAH-degradation activity, and transcription data should be interpreted cautiously.

59 BASIC BIOLOGICAL SCIENCES↗

Growth-associated polyhydroxybutyrate accumulation in Azospira suillum PS during aerobic and perchlorate respiration

Polyhydroxyalkanoates (PHAs) are widespread microbial storage polymers increasingly recognized for roles beyond carbon and energy storage, including redox homeostasis and stress physiology. While PHA accumulation is classically associated with stationary-phase metabolism under severe nutrient imbalance, comparatively little is known about growth-associated PHA synthesis in facultative anaerobes with unusual respiratory strategies. Here, we investigated polyhydroxybutyrate (PHB) metabolism in Azospira suillum PS, a genetically tractable perchlorate-reducing bacterium capable of both aerobic and anaerobic respiration. Using physiological growth experiments, targeted gene deletions, PHB extractions, and intracellular redox measurements, we examined PHB accumulation under varying respiratory and nutrient conditions. We demonstrate that PHB accumulates during exponential growth under moderately nitrogen-limited conditions, both aerobically and during perchlorate respiration, representing a rare example of growth-associated PHB synthesis under anaerobic conditions. Genomic analysis revealed four phaC homologs, one of which could not be deleted under the experimental conditions tested and co-localized with phaB and phaR. Redox profiling further revealed a strong positive correlation between PHB accumulation and intracellular NADPH/NADP+ ratios. Together, these findings expand the physiological contexts in which PHB synthesis is known to occur and highlight perchlorate-respiring bacteria as underexplored model systems for studying growth-integrated carbon and redox storage strategies.

Meier, David A O↗

Genetic transformation in the methanogen Methanococcus voltae PS

Mutations causing requirements for histidine, purine, and vitamin B12 were obtained in strain PS of Methanococcus voltae (archaebacteria) upon irradiation with UV or gamma rays. The first two mutations were shown to revert at low frequencies and were used to demonstrate the occurrence of transformation with homologous, wild-type DNA. The transformation rates obtained for these presumably chromosomal markers were in the range of 2 to 100 transformants per microgram of DNA. Mutants resistant to 2-bromoethanesulfonate and to 5-methyl-DL-tryptophan were also isolated.

Bertani, G.↗

Complex-coordinate calculation of (1,3)P resonances in Ps(-) using Hylleraas functions

An accurate calculation for (1,3)P autodetaching resonances in Ps(-) has been carried out using the complex-rotation method, which has the advantage of giving resonance position and width at the same time. The wave function is of the Hylleraas type with an available number of terms up to 1140. One 1P and two 3P resonances below the n = 2 threshold and two 1P and two 3P resonances below the n = 3 threshold of the positronium atom. Resonance parameters are compared with those obtained from scattering and adiabatic calculations where available.

Bhatia, A. K.↗

Properties of Extruded PS-212 Type Self-Lubricating Materials

Research has been underway at the NASA Lewis Research Center since the 1960's to develop high temperature, self-lubricating materials. The bulk of the research has been done in-house by a team of researchers from the Materials Division. A series of self-lubricating solid material systems has been developed over the years. One of the most promising is the composite material system referred to as PS-212 or PM-212. This material is a powder metallurgy product composed of metal bonded chromium carbide and two solid lubricating materials known to be self-lubricating over a wide temperature range. NASA feels this material has a wide potential in industrial applications. Simplified processing of this material would enhance its commercial potential. Processing changes have the potential to reduce processing costs, but tribological and physical properties must not be adversely affected. Extrusion processing has been employed in this investigation as a consolidation process for PM-212/PS-212. It has been successful in that high density bars of EX-212 (extruded PM-212) can readily be fabricated. Friction and strength data indicate these properties have been maintained or improved over the P.M. version. A range of extrusion temperatures have been investigated and tensile, friction, wear, and microstructural data have been obtained. Results indicate extrusion temperatures are not critical from a densification standpoint, but other properties are temperature dependent.

Waters, W. J.↗

Evaluation of Thermal Barrier and PS-200 Self-Lubricating Coatings in an Air-Cooled Rotary Engine

This project provides an evaluation of the feasibility and desirability of applying a thermal barrier coating overlaid with a wear coating on the internal surfaces of the combustion area of rotary engines. Many experiments were conducted with different combinations of coatings applied to engine components of aluminum, iron and titanium, and the engines were run on a well-instrumented test stand. Significant improvements in specific fuel consumption were achieved and the wear coating, PS-200, which was invented at NASA's Lewis Research Center, held up well under severe test conditions.

Moller, Paul S.↗

Water distributions in PS-b-P(S-g-PEO) block grafted copolymer system in aqueous solutions revealed by contrast variation SANS study

In this report, we present a contrast variation small angle neutron scattering (SANS) study of PS-b-P(S-g-PEO) block graft copolymers in aqueous media at a concentration of 10 mg/ml. Through varying the solvent D2O/H2O ratio, the scattering contributions from the water molecules and the micellar constituent components can be determined. Based on the commonly used core-shell model, a theoretical coherent scattering cross section incorporating the effect of water penetration is developed and used to analyze the SANS I(Q), we have successfully quantified the micellar structure and the number of - water molecules associated with the core and corona. We have found that the overall micellar hydration level increase with the increase in the molecular weight of hydrophilic PEO side chains. This study provides key information in understanding solvent distributions within self-assembled amphiphilic block grafted copolymers.

Chen, Wei-Ren↗

Laser damage by ns and sub-ps pulses on hafnia/silica anti-reflection coatings on fused silica double-sided polished using zirconia or ceria and washed with or without an alumina wash step.

Sandia's Large Optics Coating Operation has extensive results of laser induced damage threshold (LIDT) testing of its anti-reflection (AR) and high reflection coatings on substrates pitch polished using ceria and washed in a process that includes an alumina wash step. The purpose of the alumina wash step is to remove residual polishing compound to minimize its role in laser damage. These LIDT tests are for multi longitudinal mode, ns class pulses at 1064 nm and 532 nm (NIF-MEL protocol) and mode locked, sub-ps class pulses at 1054 nm (Sandia measurements), and show reasonably high and adequate laser damage resistance for coatings in the beam trains of Sandia's Z-Backlighter terawatt and petawatt lasers. An AR coating in addition to coatings of our previous reports confirms this with LIDTs of 33.0 J/cm{sup 2} for 3.5 ns pulses and 1.8 J/cm{sup 2} for 350 fs pulses. In this paper, we investigate both ceria and zirconia in doublesided polishing (common for large flat Z-Backlighter laser optics) as they affect LIDTs of an AR coating on fused silica substrates washed with or without the alumina wash step. For these AR coated, double-sided polished surfaces, ceria polishing in general affords better resistance to laser damage than zirconia polishing and laser damage is less likely with the alumina wash step than without it. This is supported by specific results of laser damage tests with 3.5 ns, multi longitudinal mode, single shot pulses at 1064 nm and 532 nm, with 7.0 ns, single and multi longitudinal mode, single and multi shot pulses at 532 nm, and with 350 fs, mode-locked, single shot pulses at 1054 nm.

36 MATERIALS SCIENCE↗