Search NASA⌕ Search

SEARCH · Search NASA

Results for “Photochemical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

A three-dimensional axisymmetric photochemical flow model of the cometary 'inner' shock layer

Assuming the Newtonian thin layer approximation to describe the structure of the shock layer between the cometary 'ionopause' and the inner shock, a 3D axisymmetric photochemical flow model of this layer is constructed. While sources of ions in this layer are the flow across the inner shock and photoionization of neutrals within it, the sinks are the flow into the flanks and dissociative recombination, the latter being the dominant one. For Halley's comet at the time of the Giotto encounter, the calculated thickness of the layer is very small, typically about 100 km for expected values of the dissociative-recombination coefficient. This is not inconsistent with the observations. The lateral flow speed near the point of encounter (inbound) is about 0.9 km/s, while the sonic line is at an angle of about 50 deg to the sun-comet line. Testing the validity of this model will have to await a cometary rendezvous mission such as the proposed CRAF/Cassini mission.

Damas, M. C.↗

Chemical kinetics and photochemical data for use in stratospheric modeling

As part of a series of evaluated sets, rate constants and photochemical cross sections compiled by the NASA Panel for Data Evaluation are provided. The primary application of the data is in the modeling of stratospheric processes, with particular emphasis on the ozone layer and its possible perturbation by anthropogenic and natural phenomena. Copies of this evaluation are available from the Jet Propulsion Laboratory.

Demore, W. B.↗

Direct detection of C4H2 photochemical products - Possible routes to complex hydrocarbons in planetary atmospheres

The photochemistry of diacetylene (C4H2), the largest hydrocarbon to be unambiguously identified in planetary atmospheres, is of considerable importance to understanding the mechanisms by which complex molecules are formed in the solar system. In this work, the primary products of C4H2's ultraviolet photochemistry were determined in a two-laser pump-probe scheme in which the products of C4H2 photoexcitation are detected by vacuum ultraviolet photoionization in a time-of-flight mass spectrometer. Three larger hydrocarbon primary products were observed with good yield in the C4H2 + C4H2 reaction: C6H2, C8H2, and C8H3. Neither C6H2 or C8H3 is anticipated by current photochemical models of the atmospheres of Titan, Uranus, Neptune, Pluto, and Triton. The free hydrogen atoms that are released during the formation of the C8H3 and C8H2 products also may partially offset the role of C4H2 in catalyzing the recombination of free hydrogen atoms in the planetary atmospheres.

Bandy, Ralph E.↗

Evaluation of the photochemical reflectance index in AVIRIS imagery

In this paper, we evaluate the potential for extracting the 'photochemical reflectance index' (PRI; previously called the 'physiological reflectance index') from AVIRIS data. This index, which is derived from narrow-band reflectance at 531 and 570 nm, has proven to be a useful indicator of photosynthetic function at the leaf and canopy scales. At the leaf level, PRI varies with photosynthetic capacity, radiation-use efficiency, and vegetation type (unpublished data). This finding is consistent with the hypothesis that vegetation types exhibiting chronically reduced photosynthesis during periods of stress (e.g. drought-tolerant evergreens) invest proportionally more in photoprotective processes than vegetation with high photosynthetic capacity (e.g. crops or deciduous perennials). Vertical transects in tropical and boreal forest canopies have indicated declines in PRI associated with downregulation of photosynthesis at the canopy tops under sunny, dry midday conditions (unpublished data). This reduced PRI in upper canopy levels provides a further basis for examining this signal with the 'view from above' afforded by aircraft overflights. Although many factors could confound interpretation of a subtle physiological signal at the landscape scale, we conducted a preliminary examination of PRI extracted from existing, AVIRIS imagery of Stanford University's Jasper Ridge Biological Preserve obtained on the June 2nd, 1992, overflight. The goal was to use the hyperspectral capabilities of AVIRIS to evaluate the potential of this index for obtaining useful physiological data at the landscape scale. The expectation based on leaf- and canopy-level studies was that regions containing vegetation of reduced photosynthetic capacity (e.g. chaparral or evergreen woodland) would exhibit lower PRI values than regions of high capacity (e.g. deciduous woodland).

Gamon, John A.↗

Photochemical oxidant processes in the presence of dust: An evaluation of the impact of dust on particulate nitrate and ozone formation

The influence of dust on the tropospheric photochemical oxidant cycle is studied through the use of a detailed coupled aerosol and gas-phase chemistry model. Dust is a significant component of the troposphere throughout Asia and provides a surface for a variety of heterogeneous reactions. Dust is found to be an important surface for particulate nitrate formation. For dust loading and ambient concentrations representative of conditions in East Asia, particulate nitrate levels of 1.5-11.5 micrograms/cubic meter are predicted, consistent with measured levels in this region. Dust is also found to reduce NO(x) levels by up to 50%, HO2 concentrations by 20%-80%, and ozone production rates by up to 25%. The magnitude of the influence of dust is sensitive to mass concentration of the aerosol, relative humidity, and the value of the accommodation coefficient.

Zhang, Yang↗

A photochemical model of the martian atmosphere

The factors governing the amounts of CO, O2, and O3 in the martian atmposphere are investigated using a minimally constrained, one-dimensional photochemical model. We find that the incorporation of temperature-dependent CO2 absorption cross sections leads to an enhancement in the water photolysis rate, increasing the abundance of OH radicals to the point where the model CO abundance is smaller that observed. Good agreement between models and observations of CO, O2, O3, and the escape flux of atomic hydrogen can be achieved, using only gas-phase chemistry, by varying the recommended rate constraints for the reaction CO + OH and OH + HO2 within their specified uncertainties. The oxygen escape flux plays a key role in the oxygen budget on Mars; as inferred from the observed atomic hydrogen escape, it is much larger than recent calculations of the exospheric escape rate for oxygen. Weathering of the surface may account for the imbalance. We also consider the possiblity that HO(x) radicals may be catalytically destroyed on dust grains suspended in the atmosphere. Good agreement with the observed CO mixing ratio can be achieved via this mechanism, but the resulting ozone column is much higher than the observed quantity.

Nair, Hari↗

Photochemical modeling of Titan's atmosphere

We have developed a new photochemical model of Titan's atmosphere which includes all the important compounds and reactions in spherical geometry from the surface to 1240 km. Compared to the previous model of Yung et al. (1984), the most significant recent change in the reactions used is the updated methane dissociation scheme (Mordaunt et al. 1993). Moreover, the transfer of the solar radiation in the atmosphere and the photolysis rates have been calculated by using a Monte Carlo code. Finally, the eddy diffusion coefficient profile is adjusted in order to fit the mean vertical distribution of HCN retrieved from millimeter groundbased observations of Tanguy et al. (1990); using new values for the boundary flux of atomic nitrogen (Strobel et al. 1992). We have run the model in both steady-state and diurnal modes, with 62 species involved in 249 reactions. There is little difference between diurnal and steady-state results. Overall our results are in a closer agreement with the abundances inferred from the Voyager infrared measurements at the equator than the Yung et al. results. We find that the catalytic scheme for H recombination invoked by Yung et al. only slightly improves the model results and we conclude that this scheme is not essential to fit observations.

Toublanc, D.↗

Chemical Kinetics and Photochemical Data for Use in Stratospheric Modeling

This is the twelfth in a series of evaluated sets of rate constants and photochemical cross sections compiled by the NASA Panel for Data Evaluation. The primary application of the data is in the modeling of stratospheric processes, with special emphasis on the ozone layer and its possible perturbation by anthropogenic and natural phenomena.

DeMore, W. B.↗

Kinetics of the Br2-CH3CHO Photochemical Chain Reaction

Time-resolved resonance fluorescence spectroscopy was employed in conjunction with laser flash photolysis of Br2 to study the kinetics of the two elementary steps in the photochemical chain reaction nBr2 + nCH3CHO + hv yields nCH3CBrO + nHBr. In the temperature range 255-400 K, the rate coefficient for the reaction Br((sup 2)P(sub 3/2)) + CH3CHO yields CH3CO + HBr is given by the Arrhenius expression k(sub 6)(T) = (1.51 +/- 0.20) x 10(exp -11) exp(-(364 +/- 41)/T)cu cm/(molecule.s). At 298 K, the reaction CH3CO + Br2 yields CH3CBrO + Br proceeds at a near gas kinetic rate, k(sub 7)(298 K) = (1.08 +/- 0.38) x 10(exp -10)cu cm/(molecule.s).

Nicovich, J. M.↗

Origin of Ozone NO(x) in the Tropical Troposphere: A Photochemical Analysis of Aircraft Observations Over the South Atlantic Basin

The photochemistry of the troposphere over the South Atlantic basin is examined by modeling of aircraft observations up to 12-km altitude taken during the TRACE A expedition in September-October 1992. A close balance is found in the 0 to 12-km column between photochemical production and loss Of O3, with net production at high altitudes compensating for weak net loss at low altitudes. This balance implies that O3 concentrations in the 0-12 km column can be explained solely by in situ photochemistry; influx from the stratosphere is negligible. Simulation of H2O2, CH3OOH, and CH2O concentrations measured aboard the aircraft lends confidence in the computations of O3 production and loss rates, although there appears to be a major gap in current understanding of CH2O chemistry in the marine boundary layer. The primary sources of NO(x) over the South Atlantic Basin appear to be continental (biomass burning, lightning, soils). There is evidence that NO(x) throughout the 0 to 12-km column is recycled from its oxidation products rather than directly transported from its primary sources. There is also evidence for rapid conversion of HNO3 to NO(x) in the upper troposphere by a mechanism not included in current models. A general representation of the O3 budget in the tropical troposphere is proposed that couples the large scale Walker circulation and in situ photochemistry. Deep convection in the rising branches of the Walker circulation injects NO(x) from combustion, soils, and lightning to the upper troposphere, leading to O3 production; eventually, the air subsides and net O3 loss takes place in the lower troposphere, closing the O3 cycle. This scheme implies a great sensitivity of the oxidizing power of the atmosphere to NO(x) emissions in the tropics.

Jacob, D. J.↗

Photochemical Phenomenology Model for the New Millenium

This project tackles the problem of conversion of validated a priori physics-based modeling capabilities, specifically those relevant to the analysis and interpretation of planetary atmosphere observations, to application-oriented software for use in science and science-support activities. The software package under development, named the Photochemical Phenomenology Modeling Tool (PPMT), has particular focus on the atmospheric remote sensing data to be acquired by the CIRS instrument during the CASSINI Jupiter flyby and orbital tour of the Saturnian system. Overall, the project has followed the development outline given in the original proposal, and the Year 1 design and architecture goals have been met. Specific accomplishments and the difficulties encountered are summarized in this report. Most of the effort has gone into complete definition of the PPMT interfaces within the context of today's IT arena: adoption and adherence to the CORBA Component Model (CCM) has yielded a solid architecture basis, and CORBA-related issues (services, specification options, development plans, etc.) have been largely resolved. Implementation goals have been redirected somewhat so as to be more relevant to the upcoming CASSINI flyby of Jupiter, with focus now being more on data analysis and remote sensing retrieval applications.

Bishop, James↗

Photochemically and Thermally Cross-Linkable Polyconjugated Systems

This project focused on the synthesis and characterization of water soluble and/or water-borne electrically conducting polymer systems that could be cross-linked thermally or photochemically. The development of these materials was carried out so that they could be applied as metal and fabric coatings. Polyaniline and polypyrrole were the polymers under investigation. The main impediment preventing commercial development of these polymers is their inherent insolubility. Methods employed to enhance polymer solubility were monomer or polymer modifications. Some post-polymerization modifications were attempted to derivatize the parent polymers, These involved attachment of suitable pendant groups that would enhance polar solvent solubility. The pendant groups of these derivatized polymers were then further reacted to cross-link, rendering the polymer insoluble. The other modifications involved polymerization of monomers in the presence of polyelectrolytic polymers. The acid functionalities of the electrolyte served as a template/dopant for monomer alignment/complexation before polymerization, resulting in a water-borne composite or complex.

Source record↗

Polyesters by Photochemical Cyclopolymerization

The polyesters of this invention are derived from a Diels-Alder cyclopolymerization of a photochemically generated bisdiene with dienophiles, such as di(acrylates), tri (acrylates), di(methacrylates), tri(methacrylates) and mixtures thereof with mono(methacrylates) or mono(acrylate) end-caps. Irradiation of one or more diketones produces two distinct hydroxy o-quinodimethane (photoenol) intermediates. These intermediates are trapped via a Diels-Alder cycloaddition with appropriate dienophiles, e.g., di(acrylates) to give the corresponding in polyesters quantitative yields. When di(acrylates), tri(acrylates) and di and tri(methacrylates) or mixtures thereof with monoacrylate end-caps are used as the dienophile, the resulting polyesters have glass transition temperatures (Tg) as high as 200 C. Polyesters films can be prepared by ultraviolet irradiation of high solids content varnishes of the monomers in a small amount of solvent, e.g., cyclohexanone, dimethyl formamide, N-methylpyrollidone and the like. These polyesters, i.e. polyesters are characterized as having high glass transition temperatures, good mechanical properties and improved processing in the manufacture of composites, adhesives, electronic materials and films.

Michael A Meador↗

Photochemical Studies of Chemistry in the Outer Solar System

The goal of the proposed science investigation is to gain a quantitative understanding of chemical processes and their coupling with atmospheric dynamics in the reducing atmospheres of the outer solar system, with a particular focus on Infrared Space Observatory (ISO) observations and future experiments such as the Cassini Mission to Saturn and Titan. The proposed work is divided into two related tasks. We have carried out a systematic comparison between atmospheric models for every giant planet and Titan, which employ a consistent set of photochemical reactions. Combined with recent observations of hydrocarbon species by ISO, this can provide the most rigorous test of our current understanding of the photochemistry of hydrocarbon in the outer solar system. The emphasis will be on the methyl radical (CH3), first detected by IS0 in the atmospheres of Saturn and Neptune (Bezard et al. 1998). CH3 is one of the most important radicals in the hydrocarbon photochemistry because it is the primary product of methane photolysis and plays an essential role in forming C2H6, the most abundant and stable C2 species. A fundamental understanding of the distribution of CH3 provides unique insights into the chemistry of hydrocarbons as well as comparative planetology.

Yung, Yuk L.↗

Polyimides by Photochemical Cyclopolymerization

The polyimides of this invention are derived from a Diels-Alder cyclopolymerization of a photochemically generated bisdiene with dienophiles, such as bismaleimides, trismaleimides and mixtures thereof with maleimide end-caps. Irradiation of one or more diketones produces two distinct hydroxy o-quinodimethane (photoenol) intermediates. These intermediates are trapped via a Diels-Alder cycloaddition with appropriate dienophiles, e.g., bismaleimide and/or trismaleimides to give the corresponding polyimides in quantitative yields. When bismaleimides, trismaleimides or mixtures thereof with maleimide end-caps are used as the dienophile, the resulting polyimides have glass transition temperatures (Tg) as high as 300 C. Polyimide films can be prepared by ultraviolet irradiation of high solids content varnishes of the monomers in a small amount of solvent, e.g., cyclohexanone, dimethyl formamide, N-methylpyrollidone and the like. These polyimides are characterized as having high glass transition temperatures, good mechanical properties and improved processing in the manufacture of adhesives, electronic materials and films.

Michael A Meador↗

Global and Regional Decreases in Tropospheric Oxidants from Photochemical Effects of Aerosols

We evaluate the sensitivity of tropospheric OH, O3, and O3 precursors to photochemical effects of aerosols not usually included in global models: (1) aerosol scattering and absorption of ultraviolet radiation and (2) reactive uptake of HO', NO2, and NO3. Our approach is to couple a global 3-D model of tropospheric chemistry (GEOS- CHEM) with aerosol fields from a global 3-D aerosol model (GOCART). Reactive uptake by aerosols is computed using reaction probabilities from a recent review (gamma(sub HO2) = 0.2, gamma(sub NO2) = 10(exp -4), gamma(sub NO3) = l0(exp -3). Aerosols decrease the O3 - O((sup 1)D) photolysis frequency by 5-20% at the surface throughout the Northern Hemisphere (largely due to mineral dust) and by a factor of 2 in biomass burning regions (largely due to black carbon). Aerosol uptake of HO2 accounts for 10-40% of total HOx radical ((triple bonds)OH + peroxy) loss in the boundary layer over polluted continental regions (largely due to sulfate and organic carbon) and for more than 70% over tropical biomass burning regions (largely due to organic carbon). Uptake of NO2 and NO3 accounts for 10-20% of total HNO3 production over biomass burning regions and less elsewhere. Annual mean OH concentrations decrease by 9% globally and by 5-35% in the boundary layer over the Northern Hemisphere. Simulated CO increases by 5- 15 ppbv in the remote Northern Hemisphere, improving agreement with observations. Simulated boundary layer O3 decreases by 15- 45 ppbv over India during the biomass burning season in March and by 5-9 ppbv over northern Europe in August, again improving comparison with observations. We find that particulate matter controls would increase surface O3 over Europe and other industrial regions.

Martin, Randall V.↗

Diels-Alder Trapping of Photochemically Generated Dienes with Acrylic Esters: A Novel Approach to Photocured Polymer Film Development

Diels-Alder cycloadditions have often been utilized in polymer synthesis as an alternative to condensation reactions. In our earlier efforts, we developed a new method for the preparation of linear aromatic polyimides, which employs o-quionodimethanes (o-QDMs), generated by a well-known photochemical reaction: the photoenolization of o-methylphenyl ketones. Photolysis of o-methylbenzophenone 1 produces hydroxy-o-quino- diemthane 2, which can be trapped with dienophiles, such as dimethyl acetylenedicarboxylate, to efficiently yield the corresponding cycloadduct (Scheme 1). Here we extend this approach to a novel photocuring process for development of polymer films. We synthesized a series of molecules with multi o-mehtylphenyl ketone functionalities. We further investigated these molecules as photoreactive monomers to obtain polyester films through Diels-Alder cycloadditions.

Ilhan, Faysal↗