Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plasma acceleration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Improved laser-plasma accelerator stability via high-bandwidth longitudinal focal position stabilization of a 100 TW-class laser system

Laser-plasma accelerators (LPAs) offer an attractive alternative to conventional accelerators for the development of compact electron sources and next-generation light sources. Due to orders-of-magnitude larger accelerating gradients, LPAs enable the acceleration of high-brightness electron beams to ultrarelativistic energies in millimeter- to centimeter-scale distances. However, LPA stability is limited by shot-to-shot fluctuations of the driving laser system. Specifically, fluctuations in the final-focus longitudinal position result in correlated instability in LPA electron beam qualities, including total beam charge, average beam energy, and energy spread. We demonstrate active stabilization of the longitudinal focal position for a 100 TW-class laser system. This repetition-rate scalable stabilization system leverages noninvasive wave front monitoring of a copropagating, unamplified kHz pulse train to guide corrective adjustments to the focal position of a 1 Hz amplified drive laser via an upstream telescope on millisecond timescales. In this demonstration, the approach limits standard deviation fluctuations of the amplified drive beam’s longitudinal focal position to ±0.22⁢ mm (representing at least a 53% reduction), achieved with a correction bandwidth that reaches the Nyquist frequency limit. Consequently, we observe marked improvements in both long-term and shot-to-shot LPA stability in terms of charge and spectrum.

Beam control↗
DOE OSTI2022

Analysis Methods for Electron Radiography Based on Laser-Plasma Accelerators

Analysis methods are presented for determining the resolution of both contact and projected electron radiography based on a laser-plasma accelerator. A means to determine the field strength of the electric/magnetic fields generated when a laser is incident on an object of interest is also out-lined. Broad radiography results are reported and future plans for the diagnostic technique are outlined.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Extended X-ray absorption spectroscopy using an ultrashort pulse laboratory-scale laser-plasma accelerator

Laser-driven compact particle accelerators can provide ultrashort pulses of broadband X-rays, well suited for undertaking X-ray absorption spectroscopy measurements on a femtosecond timescale. Here the Extended X-ray Absorption Fine Structure (EXAFS) features of the K-edge of a copper sample have been observed over a 250 eV window in a single shot using a laser wakefield accelerator, providing information on both the electronic and ionic structure simultaneously. This capability will allow the investigation of ultrafast processes, and in particular, probing high-energy-density matter and physics far-from-equilibrium where the sample refresh rate is slow and shot number is limited. For example, states that replicate the tremendous pressures and temperatures of planetary bodies or the conditions inside nuclear fusion reactions. Using high-power lasers to pump these samples also has the advantage of being inherently synchronised to the laser-driven X-ray probe. A perspective on the additional strengths of a laboratory-based ultrafast X-ray absorption source is presented.

43 PARTICLE ACCELERATORS↗
NASA NTRS2011

Magnetic Shielding of the Channel Walls in a Hall Plasma Accelerator

In a qualification life test of a Hall thruster it was found that the erosion of the acceleration channel practically stopped after approx 5,600 h. Numerical simulations using a two-dimensional axisymmetric plasma solver with a magnetic field-aligned mesh reveal that when the channel receded from its early-in-life to its steady-state configuration the following changes occurred near the wall: (1) reduction of the electric field parallel to the wall that prohibited ions from acquiring significant impact kinetic energy before entering the sheath, (2) reduction of the potential fall in the sheath that further diminished the total energy ions gained before striking the material, and (3) reduction of the ion number density that decreased the flux of ions to the wall. All these changes, found to have been induced by the magnetic field, constituted collectively an effective shielding of the walls from any significant ion bombardment. Thus, we term this process in Hall thrusters "magnetic shielding."

ion density↗
DOE OSTI2019

Tunable High Spatio-Spectral Purity Undulator Radiation from a Transported Laser Plasma Accelerated Electron Beam

Undulator based synchrotron light sources and Free Electron Lasers (FELs) are valuable modern probes of matter with high temporal and spatial resolution. Laser Plasma Accelerators (LPAs), delivering GeV electron beams in few centimeters, are good candidates for future compact light sources. However the barriers set by the large energy spread, divergence and shot-to-shot fluctuations require a specific transport line, to shape the electron beam phase space for achieving ultrashort undulator synchrotron radiation suitable for users and even for achieving FEL amplification. Proof-of-principle LPA based undulator emission, with strong electron focusing or transport, does not yet exhibit the full specific radiation properties. We report on the generation of undulator radiation with an LPA beam based manipulation in a dedicated transport line with versatile properties. After evidencing the specific spatio-spectral signature, we tune the resonant wavelength within 200–300 nm by modification of the electron beam energy and the undulator field. We achieve a wavelength stability of 2.6%. We demonstrate that we can control the spatio-spectral purity and spectral brightness by reducing the energy range inside the chicane. We have also observed the second harmonic emission of the undulator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2011

Thrust Stand Measurements Using Alternative Propellants in the Microwave Assisted Discharge Inductive Plasma Accelerator

Storable propellants (for example water, ammonia, and hydrazine) are attractive for deep space propulsion due to their naturally high density at ambient interplanetary conditions, which obviates the need for a cryogenic/venting system. Water in particular is attractive due to its ease of handling and availability both terrestrially and extra-terrestrially. While many storable propellants are reactive and corrosive, a propulsion scheme where the propellant is insulated from vulnerable (e.g. metallic) sections of the assembly would be well-suited to process these otherwise incompatible propellants. Pulsed inductive plasma thrusters meet this criterion because they can be operated without direct propellant-electrode interaction. During operation of these devices, electrical energy is capacitively stored and then discharged through an inductive coil creating a time-varying current in the coil that interacts with a plasma covering the face of the coil to induce a plasma current. Propellant is accelerated and expelled at a high exhaust velocity (O(10-100 km/s)) by the Lorentz body force arising from the interaction of the magnetic field and the induced plasma current. While this class of thruster mitigates the life-limiting issues associated with electrode erosion, many pulsed inductive plasma thrusters require high pulse energies to inductively ionize propellant. The Microwave Assisted Discharge Inductive Plasma Accelerator (MAD-IPA) is a pulsed inductive plasma thruster that addressees this issue by partially ionizing propellant inside a conical inductive coil before the main current pulse via an electron cyclotron resonance (ECR) discharge. The ECR plasma is produced using microwaves and a static magnetic field from a set of permanent magnets arranged to create a thin resonance region along the inner surface of the coil, restricting plasma formation, and in turn current sheet formation, to a region where the magnetic coupling between the plasma and the theta-pinch coil is high. The use of a conical theta-pinch coil also serves to provide neutral propellant containment and plasma plume focusing that is improved relative to the more common planar geometry of the Pulsed Inductive Thruster (PIT). In this paper, we describe thrust stand measurements performed to evaluate the specific impulse and thrust efficiency of the MAD-IPA for a variety of propellants. Propellants tested include both widely-used, non-reactive noble gases like argon, and rarely-used propellants such as water, hydrazine and ammonia. Dependencies of impulse data on propellant species are discussed in the context of the current sheet formation and electromagnetic plasma acceleration processes.

Hallock, Ashley K.↗
DOE OSTI2020

Observations on Microbunching of Electrons in Laser-Driven Plasma Accelerators and Free-Electron Lasers

The periodic longitudinal density modulation of relativistic electrons at the resonant wavelength (microbunching) is a fundamental aspect of free-electron lasers (FELs). In one case, microbunching fractions reached 20% at saturation of a self-amplified spontaneous emission (SASE) FEL resulting in gains of 1 million at 530 nm. In that experiment the $\textit{z}$-dependent gain of coherent optical transition radiation (COTR) was also measured. In laser-driven plasma accelerators (LPAs), microbunching at visible wavelengths has also been recently reported as evidenced by significant COTR enhancements measured in near-field and far-field images on a single shot for the first time. An analytical model for COTR interferometry (COTRI) addresses both cases. The broadband microbunching observed in the LPA case could act as a seed for a SASE FEL experiment with tunability in principle over the visible regime.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Laser-plasma acceleration beyond wave breaking

Laser wakefield accelerators rely on the extremely high electric fields of nonlinear plasma waves to trap and accelerate electrons to relativistic energies over short distances. When driven strongly enough, plasma waves break, trapping a large population of the background electrons that support their motion. Aside from limiting the maximum electric field, this trapping can lead to accelerated electron bunches with large energy spreads. Here we introduce a novel regime of plasma wave excitation and wakefield acceleration that allows for arbitrarily high electric fields while avoiding the deleterious effects of unwanted trapping. Here, the regime, enabled by spatiotemporal shaping of laser pulses, exploits the property that nonlinear plasma waves with superluminal phase velocities cannot trap charged particles and are therefore immune to wave breaking.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Some experimental observations on circulating currents in a crossed field plasma accelerator

Experiments on a thermally ionized argon plasma suggest that applying a Lorentz force by means of orthogonal electric and magnetic fields to an electrically conducting fluid flow imposes necessary but not sufficient conditions for acceleration. There are, in fact, many combinations of current and magnetic field which cause decelerations of the fluid. The deceleration arises from a retarding force which may be larger than the applied Lorentz force. The retarding force causing the deceleration is a consequence of currents circulating completely within the fluid. These currents arise from differences in velocity between the central and wall regions of the duct which interact with the imposed magnetic field to produce differences in induced voltages. The observed physical effects of the circulating currents cause a loss in velocity in the central region of the duct, an increase in thermal energy in the sidewall region, and little change in thermal energy near the electrode wall region. For similar velocity profiles, the adverse effects appear to be related to the product of electrical conductivity and velocity, and performance as an accelerator appears to be controlled by the Hoffman loading parameter (i.e., the ratio of the applied to the induced currents).

Jedlicka, J.↗
NASA NTRS2011

Effect of an Additional, Parallel Capacitor on Pulsed Inductive Plasma Accelerator Performance

A model of pulsed inductive plasma thrusters consisting of a set of coupled circuit equations and a one-dimensional momentum equation has been used to study the effects of adding a second, parallel capacitor into the system. The equations were nondimensionalized, permitting the recovery of several already-known scaling parameters and leading to the identification of a parameter that is unique to the particular topology studied. The current rise rate through the inductive acceleration coil was used as a proxy measurement of the effectiveness of inductive propellant ionization since higher rise rates produce stronger, potentially better ionizing electric fields at the coil face. Contour plots representing thruster performance (exhaust velocity and efficiency) and current rise rate in the coil were generated numerically as a function of the scaling parameters. The analysis reveals that when the value of the second capacitor is much less than the first capacitor, the performance of the two-capacitor system approaches that of the single-capacitor system. In addition, as the second capacitor is decreased in value the current rise rate can grow to be twice as great as the rise rate attained in the single capacitor case.

Polzin, Kurt A.↗
NASA NTRS1971

Improved plasma accelerator

Converging, coaxial accelerator electrode configuration operates in vacuum as plasma gun. Plasma forms by periodic injections of high pressure gas that is ionized by electrical discharges. Deflagration mode of discharge provides acceleration, and converging contours of plasma gun provide focusing.

Cheng, D. Y.↗
NASA NTRS2010

Design of a Microwave Assisted Discharge Inductive Plasma Accelerator

The design and construction of a thruster that employs electrodeless plasma preionization and pulsed inductive acceleration is described. Preionization is achieved through an electron cyclotron resonance discharge that produces a weakly-ionized plasma at the face of a conical theta pinch-shaped inductive coil. The presence of the preionized plasma allows for current sheet formation at lower discharge voltages than those employed in other pulsed inductive accelerators that do not employ preionization. The location of the electron cyclotron resonance discharge is controlled through the design of the applied magnetic field in the thruster. Finite element analysis shows that there is an arrangement of permanent magnets that yields a small volume of resonant magnetic field at the coil face. Preionization in the resonant zone leads to current sheet formation at the coil face, which minimizes the initial inductance of the pulse circuit and maximizes the potential electrical efficiency of the accelerator. A magnet assembly was constructed around an inductive coil to provide structural support to the selected arrangement of neodymium magnets. Measured values of the resulting magnetic field compare favorably with the finite element model.

Hallock, Ashley K.↗
NASA NTRS1990

Simple model of plasma acceleration in a magnetic nozzle

A collisionless, steady-state, cold-plasma model is used to calculate the three-dimensional trajectory of a plasma as it is accelerated through a diverging magnetic field. The magnetic field is assumed to be axisymmetric with nonzero radial and axial components and zero azimuthal component. Although random thermal motion of plasma species is neglected in the cold plasma approximation, an important effect of plasma thermal energy is accounted for in the model as the kinetic energy of electrons in their Larmor motion about magnetic field lines. Calculations based on this model confirm previous studies which suggested that plasma separation from the field of a magnetic nozzle can take place even in the absence of collisional diffusion. It is shown that plasma divergence in a magnetic nozzle can be controlled by tailoring the field geometry.

Sercel, Joel C.↗
DOE OSTI2019

Measurement of accreted helium ion velocity using Doppler spectroscopy in the CTIX compact-toroid plasma accelerator

A compact-toroid (CT) accelerator is a device for the production of plasma bodies which contain a relatively strong internal magnetic field, which permits the plasma body to withstand large forces of acceleration while retaining its magnetic field structure. Typically, the CT occupies an annular region between inner and outer radii, defined by coaxial inner and outer electrodes, across which a large electric potential is applied. The internal magnetic fields of the CT contain both a toroidal and poloidal component, as shown in Fig. 1(a). These fields are typically of comparable magnitude. Because of the effective rigidity provided by internal magnetic fields, the CT can be accelerated to high velocities in short distances. Since internal fields increase in proportion to accelerating magnetic field, there is no strength at which the accelerating magnetic fields overcome the internal field (blow-by). Because of this, the kinetic energy density of CTs can be made to exceed the energy density of magnetic fields typical of plasma containment devices such as tokamaks. CTs have the potential to be launched into the interior of such devices for either delivering fuel (typically deuterium or hydrogen), or to deliver particles of high atomic number (high-Z). An important application of high-Z CT injection into tokamaks is to aid in plasma quenching by radiation, to mitigate the effects of plasma disruptions and prevent damage to the plasma confinement device. In addition, high-Z CTs may be used as sources of kinetic energy density for plasma-compression experiments. In this case, the use of plasma species of high atomic number is also desirable, since kinetic energy density is proportional to atomic number for given CT velocity and electron density gas puffing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1988

Plasma acceleration, injection, and loss - Observational aspects

A history of the understanding of the sudden accelerations of charged particles noted in plasmas, and the accompanying intrusions of energized plasma into adjacent regions of space, is presented. It is pointed out that studies of the earth's magnetosphere are hampered by the lack of adequate sampling in space and time. Although the feature matching technique of building magnetic and electric field models can help compensate for the sparseness of experimental data, future studies will nonetheless require large numbers of spacecraft placed in carefully coordinated orbits. The notion that the ignition of portions of the auroral shell in association with earth flares results in the heating of ionospheric particles that are then convected inward to form the ring current is considered.

Mcilwain, C. E.↗