Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer deconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

139 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Confocal Raman Microscopy as a Probe of Material Deconstruction in Processed Low-Density Polyethylene Particles

Confocal Raman microscopy was applied to detect structural change within individual particles of low-density polyethylene (LDPE) following chemical and electrochemical processing steps that aimed to facilitate material decomposition. A high numerical aperture (NA) oil-immersion objective enabled depth-profiling through the near surface region (20 μm–40 μm) of irregularly shaped particles with an axial spatial resolution < 2 μm estimated from measurements of instrument detection efficiency profiles. Changes in vibrational bands sensitive to polyethylene crystallinity were evident following treatments and linked to the release of low molecular weight compounds present as additives and products of processing. Effects of processing were probed by monitoring the rise of Raman scattering intensity in vibrational modes associated with polyethylene chains in a zig-zag (trans) conformation near 1128 cm –1 , 1294 cm –1 , and 1418 cm –1 , signaling chain clustering and development of organized, crystalline-like assemblies. Pristine LDPE particles displayed a uniform structure across the near surface region, while particles treated initially with chemical extractant and then further processed displayed increasingly enhanced crystallinity up to the maximum depth probed (40 μm). As a step toward measurements on ensembles of particles, least squares modeling was adapted to derive pure component spectra reflecting crystallinity change within spectral datasets. The work demonstrates high spatial resolution Raman depth-profiling for the characterization of processed polymers using a high NA immersion objective to overcome the limitations of air-objectives often used for confocal Raman microscopy.

Wahiduzzaman, Md. [Department of Chemistry and Bio↗
DOE OSTI2023

Heterogenous electromediated depolymerization of highly crystalline polyoxymethylene

Abstract Post-consumer plastic waste in the environment has driven the scientific community to develop deconstruction methods that yield valued substances from these synthetic macromolecules. Electrocatalysis is a well-established method for achieving challenging transformations in small molecule synthesis. Here we present the first electro-chemical depolymerization of polyoxymethylene—a highly crystalline engineering thermoplastic (Delrin®)—into its repolymerizable monomer, formaldehyde/1,3,5-trioxane, under ambient conditions. We investigate this electrochemical deconstruction by employing solvent screening, cyclic voltammetry, divided cell studies, electrolysis with redox mediators, small molecule model studies, and control experiments. Our findings determine that the reaction proceeds via a heterogeneous electro-mediated acid depolymerization mechanism. The bifunctional role of the co-solvent 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) is also revealed. This study demonstrates the potential of electromediated depolymerization serving as an important role in sustainable chemistry by merging the concepts of renewable energy and circular plastic economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The role of the Pt-group dehydrogenation catalyst in alkane metathesis for polyolefin deconstruction

Recent proposed approaches in the depolymerization of waste plastics employ an olefin intermediate to produce alkanes or alkenes using olefin metathesis in tandem chemistry. Here, in this study, we investigated the role of the dehydrogenation catalyst on reaction rate, kinetics, and product distribution in heterogeneous tandem dehydrogenation and olefin metathesis (alkane metathesis) of three different alkane reactants, including polyethylene. We found that many properties to which alkane dehydrogenation rates were sensitive-including metal composition, nanoparticle size, and surface doping of Re species also controlled activity in Tandem D/OM. When comparing Pd, Pt, and Pt 3 Sn 1 , supported Pd in tandem with a Re 2 O 7 olefin metathesis catalyst showed four-fold higher activity (surface area basis) compared to Pt or Pt 3 Sn 1 catalysts on the same support, mainly due to differences in the rate of hydrogenation. Catalyst preparation resulted in metal nanoparticles partially covered by ReO x , as seen from elemental mapping. Co-location of Re 2 O 7 and Pd correlated with increased rates of hydrogenation (i.e., an increase in the rate of alkane formation and simultaneous lowering of the rate of alkene formation), with a reaction order in catalyst study that further supported this conclusion. The Pd and Re 2 O 7 system displayed marked improvement compared to Pt or Pt 3 Sn 1 with Re 2 O 7 , and previous work, in the depolymerization rate of a linear polyethylene feedstock, with over 94 % reduction in polymer molecular weight in 15 h at 190 °C using less catalyst and increased reactant loadings, while keeping solvent to polymer consumption below 2.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rhamnogalacturonan I is a recalcitrant pectin domain during Clostridium thermocellum -mediated deconstruction of switchgrass biomass

Background Liquid fuels from lignocellulosic feedstocks are required for transition to a sustainable bioeconomy. However, the recalcitrance of carbon-containing feedstock cell walls to deconstruction poses a barrier to cost effective biological conversion of plant biomass to biofuels. One-step consolidated bioprocessing (CBP) in which anaerobic thermophilic bacteria convert lignocellulosic biomass into liquid fuels is a platform for overcoming the recalcitrance of plant biomass. Results The amounts of hemicellulosic and pectic polysaccharides, two complex cell wall glycans that contribute to plant biomass recalcitrance and that are partially solubilized during CBP of switchgrass aerial biomass by Clostridium thermocellum were evaluated in the liquor, solid residues and residue washate recovered during a 120-h CBP process. After 120 h, 24% of milled switchgrass was solubilized in the C. thermocellum CBP platform. Higher concentrations of arabinose, xylose, galactose, and glucose accumulated in the CBP-fermentation liquor and washate compared to fermentation controls without C. thermocellum, indicating that C. thermocellum solubilized hemicelluloses, but did not fully metabolize them. After five days of fermentation, the relative amount of rhamnose in the solid residues increased by 16% compared to controls, and CBP solid residues had more than 23% increased reactivity against RG-I reactive monoclonal antibodies, indicating that the pectic polymer rhamnogalacturonan I (RG-I) was not effectively solubilized from switchgrass biomass by C. thermocellum CBP. Similarly, the amount of mannose (Man) in the CBP solid residues increased by 7% and reactivity against galactomannan reactive antibodies increased by greater than 14%, indicating that the hemicellulosic polymer galactomannan was also resistant to degradation by C. thermocellum during CBP fermentation. Conclusions These findings show that C. thermocellum is unable to effectively degrade RG-I pectic and galactomannan hemicellulosic components in switchgrass biomass. Targeting these polymers for improved solubilization could enhance the efficiency of conversion of grass biomass to biofuels.

09 BIOMASS FUELS↗
DOE OSTI2023

Electrochemical Oxidation and Functionalization of Low‐Density Polyethylene

Abstract Plastic waste is a serious environmental issue, and polyethylene (PE) is a significant component. The chemically inert nature of PE makes its recycling/upcycling process challenging. Thus, a novel method was demonstrated that enables the selective electrochemical functionalization and deconstruction of low‐density polyethylene (LDPE) by using low‐cost transition metal electrocatalysts at room temperature (23±2 °C) and low cell voltage (±1 V). Three different electrode and electrolyte combinations were studied for the oxidation of LDPE: copper metal/copper (II) ions, nickel metal/nickel (II) ions, and stainless steel/iron (II) and (III) ions. The copper and nickel electrode/electrolyte pairs showed a promising capability for oxidation and chain‐scission of LDPE. In contrast, the stainless‐steel and iron electrode/electrolyte pair showed no activity towards LDPE oxidation or depolymerization. The electrolysis of LDPE offers a new vista for the depolymerization and upcycling of plastics, further understanding of the process is needed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Upcycling plastic waste into polyhydroxyalkanoates with high carbon conversion via CO 2 plasma-enabled deconstruction

Plastic deconstruction into fermentable intermediates is a key step for microbial bio-upcycling into value-added products. In this study, CO 2 plasma deconstruction was used as an electrified route to convert polyethylene into oxygenated intermediates and liquid (OIL). The resulting OIL was rich in fatty acids, fatty alcohols, and hydrocarbons, making it a suitable feedstock for medium-chain-length polyhydroxyalkanoate (mcl-PHA) production by Pseudomonas putida NRRL B-14688 and Pseudomonas resinovorans NRRL B-2649. Compared with batch fermentation and monocultures, fed-batch co-cultivation markedly improved biomass formation and PHA accumulation, likely due to complementary substrate utilization, particularly hydrocarbon conversion by P. resinovorans. Using virgin polyethylene-derived OIL (Vir-OIL), the co-culture achieved 40.11% mcl-PHA content and about 18% PHA yield based on total OIL fed. More importantly, OIL produced from post-consumer single-use plastic films (PCR-OIL) was directly fermented and well supported the cell growth and PHA accumulation, achieving 38.11% PHA content and about 14.7% PHA yield. Based on emulsified OIL fractions, PHA yields for Vir-OIL and PCR-OIL were comparable (∼28%). PHA granules were extracted from PCR-OIL-grown cells with high recovery (88.25%) and purity (94.8%). Five monomers were identified in the polymer, including 3-hydroxyhexanoate (3HHx), 3-hydroxyoctanoate (3HO), 3-hydroxydecanoate (3HD), 3-hydroxydodecanoate (3HDD), and 3-hydroxytetradecanoate (3HTD), with 3HO (44.28%) and 3HD (40.60%) as the dominant units. The polymer exhibited moderate molecular weight and narrow dispersity (M n = 65.4 kDa, M w = 92.1 kDa, Đ = 1.40) and low crystallinity (T m ≈ 76.6 °C, X c ≈ 15.5%). These characteristics indicate elastomer-like behavior, making the material suitable for flexible applications such as films, coatings, adhesives, and blend modifiers. Overall, this study establishes a CO 2 plasma-assisted route for generating fermentable polyethylene-derived intermediates and demonstrates that fed-batch co-culture fermentation can effectively funnel plastic-derived carbon into mcl-PHA.

42 ENGINEERING↗
DOE OSTI2025

The Triple Catalytic Action of Tertiary Nitrogen Catalysts in Recyclable Epoxy-Anhydride Thermosets

The thermosetting polymer matrix in fiber reinforced composites is an important component for energy related applications, such as the lightweighting of vehicles or their use in wind and waterpower turbine blades, due to their ability to provide superior adhesion, stiffness, and applicability to a wide range of manufacturing processes. Despite these benefits, today's thermosets are widely considered to be unrecyclable; thus, there is a large interest in redesigning these materials to be inherently recyclable so that energy intensive production of fibers and monomers can be circumvented, bolstering composite manufacture supply chains. Polyester covalent adaptable networks (PECANs) are one such promising alternative to the incumbent, nonrecyclable epoxy-amine thermosets. PECANs can be formed from the ring-opening co-polymerization (ROCOP) of epoxy-anhydride monomer mixtures and subsequent curing at mild temperatures to exhibit similar performance to conventional epoxies while also possessing unique dynamic chemistries along the ester-hydroxyl backbone that are capable of transesterification and thus reprocessability. While significant advancements have been made in formulating these materials for improved mechanical properties or optimizing solvolysis and reprocessing strategies, less attention has been placed on the impact of the residing amine catalyst used to generate the polyester network. In this work, we evaluated the triple-catalytic efficacy of 12 tertiary amines that act as a curing (bulk ROCOP), a transesterification (internal bond exchange), and a deconstruction (methanolysis) catalyst for PECAN thermosets. Specifically, we first distinguish between chain-growth and step-growth polymerization mechanisms for epoxy-amine and epoxy-anhydride mechanisms. We also utilized density functional theory (DFT) to estimate the basicity (pKb) of each catalyst. Of the tested catalysts, the ROCOP of the studied PECAN network can be completed between 95 and 247 min (at 80 degrees C), with variable gelation phenomena. Additionally, the stress relaxation (transesterification metric) efficiency of the tested PECAN networks with alternative embedded catalysts ranged from 95% to 15% reduction in stress after 5 h at 200 degrees C, and the depolymerization efficacy ranged from 2.5% to 9.8% deconstruction after 36 h at 130 degrees C. Overall, the nitrogen-based moieties were demonstrated to influence polymerization kinetics, catalyze the dynamic transesterification exchange mechanism, and aid in the solvolysis of the thermosets at end-of-life.

36 MATERIALS SCIENCE↗
DOE OSTI2025

p -Coumaroylated Lignins Are Natively Produced in Three Rosales Families

Carbon-rich plant cell walls contain biopolymers that, with some processing, could replace fossil fuels as a major component of the current petrochemical production. To realize this, biorefineries need to be paired with biomass that during the deconstruction and fractionation processes transforms into the desired products. One component of interest is p-coumarate that, in some species, can account for up to 1% of the biomass’ dry weight. When p-coumarate is present in eudicot cell walls, it is mostly part of the suberin (bark and root), acylates the γ-hydroxy group of the lignin, in part of the tannins, or is a metabolite. The current understanding of eudicot plant cell wall composition is that the lignin is sometimes acylated with acetate and rarely with hydroxycinnamates (p-coumarate or ferulate). This study identified a clear division in the Rosales in which three families produce p-coumaroylated lignins whereas the other six families showed no evidence of the trait.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Conversion of Polystyrene to Terephthalic Acid via Sequential Acetylation and Mn/Br-Catalyzed Autoxidation

Most methods for the oxidative deconstruction of polystyrene produce benzoic acid, which has a low market size relative to the production of waste polystyrene. Here, the present study demonstrates a method for conversion of polystyrene into terephthalic acid, a high-volume chemical, by introducing a carbon-containing fragment into the para position of the phenyl groups in polystyrene, followed by Mn/Br-catalyzed autoxidation. Acetylated polystyrene is shown to be the most effective substrate for oxidation, affording an 81% yield of terephthalic acid. Mechanistic studies highlight the effectiveness of bromide as a cocatalyst and offer insight into the underlying reasons the acetyl group undergoes efficient oxidation.

Mid-Century Process↗
DOE OSTI2021

Polypeptide organic radical batteries

In only a few decades, lithium-ion batteries have revolutionized technologies, enabling the proliferation of portable devices and electric vehicles, with substantial benefits for society. However, the rapid growth in technology has highlighted the ethical and environmental challenges of mining lithium, cobalt and other mineral ore resources, and the issues associated with the safe usage and non-hazardous disposal of batteries. Only a small fraction of lithium-ion batteries are recycled, further exacerbating global material supply of strategic elements. A potential alternative is to use organic-based redox-active materials to develop rechargeable batteries that originate from ethically sourced, sustainable materials and enable on-demand deconstruction and reconstruction. Making such batteries is challenging because the active materials must be stable during operation but degradable at end of life. Further, the degradation products should be either environmentally benign or recyclable for reconstruction into a new battery. Here we demonstrate a metal-free, polypeptide-based battery, in which viologens and nitroxide radicals are incorporated as redox-active groups along polypeptide backbones to function as anode and cathode materials, respectively. These redox-active polypeptides perform as active materials that are stable during battery operation and subsequently degrade on demand in acidic conditions to generate amino acids, other building blocks and degradation products. Here, such a polypeptide-based battery is a first step to addressing the need for alternative chemistries for green and sustainable batteries in a future circular economy.

25 ENERGY STORAGE↗
DOE OSTI2023

2.3.4.100 - Lignin Utilization

Lignin depolymerization to aromatic monomers is a primary route for myriad lignin valorization strategies. To date, there are many strategies able to cleave aryl-ether linkages in lignin, but the lignin polymer, in both its native and processed forms, contains a substantial fraction of refractory carbon-carbon linkages between aromatic units, which typically limits aromatic monomer yields to -30-40 wt% or lower, depending on the feedstock. To that end, the Lignin Utilization (LigU) project addresses the critical challenge of lignin depolymerization catalysis with emphasis on C-C bond cleavage. Being able to achieve cost-effective C-C bond catalysis in lignin depolymerization would enable a substantial increase in accessible aromatic monomer yields from lignin. Among the catalysis strategies that have been investigated in the LigU project, we have made substantial progress in the use of autoxidation catalysis, inspired by the industrial conversion of p-xylene to terephthalic acid, for C-C bond cleavage in lignin. Using multiple substrates, we have demonstrated that autoxidation catalysis can produce mixtures of bio-available aromatic monomers for conversion to exemplary bioproducts, such as cis,cis-muconic acid, in collaboration with the Biological Lignin Valorization project. Prior to FY23, the LigU project also included lignin analytical chemistry method development, lignin analytics for BETO-funded projects, and model compound syntheses, which will also be presented.

BIOMASS FUELS↗
DOE OSTI2020

Flowthrough Pretreatment of Softwood under Water-only and Alkali Conditions

Flowthrough pretreatment provides valuable insight in the fundamentals of deconstruction of plant biomass. In this study, the potential softwood degradation pathways under water-only and alkali conditions were determined by elucidating the deconstructed biomass-derived products at 0-270 °C for 2-10 min at a flow rate of 25 mL/min with water-only or alkaline at initial pH of 8, 9, 11, and 12, respectively. Results indicated that the initial pH value was a convenient indicator along with the severity parameter to control biomass degradation through the non-oxidative (pH<9) and oxidative (pH=9) pathways. Up to 100 % of hemi-sugars, 90 % of cellulose, and 70 % of lignin were derived from softwood under non-oxidative conditions at severity parameter LogR0 around 5.5, respectively. On the contrary, at pH 12, the oxidative degradation resulted in pretreated hydrolysate rich in monomeric and oligomeric phenolic products as well as glycolic acid, acetic acid, and formic acid from carbohydrates. The two dimensional 1H-13C heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) analysis revealed that non-oxidative degradation at initial pH values lower than 9 mainly cleaved ß-O-4, all of the ß-ß, and ß-5/a-O-4 linkages, whereas substantial aromatic ring structures with limited ß-O-4 structures remaining at pH 12 through oxidative degradation.

Zhang, Libing↗
DOE OSTI2026

Effect of Radical Initiators on Polypropylene Thermal Deconstruction

A new route for polypropylene (PP) deconstruction through radical pathways based on thermodynamic and kinetic considerations has been investigated. Radical polypropylene (PP) deconstruction, activated through small quantities of initiators, can enable the deconstruction of waste POs into unsaturated products. We found that stirring was detrimental to the β-scission extent because it accelerates radical termination reactions through mixing. The best results were achieved by using a semibatch process that included mechanical mixing during the temperature ramp, static heating of the polymer/initiator mixture at the final temperature, and volatile product removal with N 2 . Dicumyl peroxide and alkylated dicumene initiators produced similar liquid and solid products after a 30 min thermal treatment. Terminal alkenes were formed in the liquid products of reactions at 375 and 400 °C, with about 5% of the protons in the liquid product ascribed to terminal alkenes. Yields of liquid products increased with temperature, reaching 60% w/w at 400 °C; at the same time, yields of solid products decreased with temperature to 16% w/w at 400 °C. Although radical initiators decrease PP molecular weight during the temperature ramp, at 400 °C, initiators only marginally increased the liquid product fraction compared to control experiments. Finally, the terminal double bonds in the liquid product mixture (C8–C36) provide multiple pathways for upgrading to surfactants, plasticizers, lube oils, and other valuable products.

liquids↗