Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process Scaling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Methane emissions from tree stems: a new frontier in the global carbon cycle

Tree stems from wetland, floodplain and upland forests can produce and emit methane (CH 4 ). Tree CH 4 stem emissions have high spatial and temporal variability, but there is no consensus on the biophysical mechanisms that drive stem CH 4 production and emissions. Here, we summarize up to 30 opportunities and challenges for stem CH 4 emissions research, which when addressed will improve estimates of magnitudes, patterns, drivers and trace the potential origin of CH 4 emissions. We identified the need (i) for both long–term high frequency measurements of stem CH 4 emissions to understand the fine scale processes, alongside rapid large–scale measurements designed to understand variability across individuals, species and ecosystems; (ii) to identify microorganisms and biogeochemical pathways associated with CH 4 production; and (iii) to develop a mechanistic model including passive and active transport of CH 4 from the soil–tree–atmosphere continuum. Addressing these challenges would help to constrain magnitudes and patterns of CH 4 emissions, and would allow for the integration of pathways and mechanisms of CH 4 production and emissions into process–based models. As a result, these advances will facilitate upscaling of stem CH 4 emissions to the ecosystem level and quantify the role of stem CH 4 emissions for the local–to–global CH 4 budget.

54 ENVIRONMENTAL SCIENCES↗

Comparative Study of Laboratory-Scale and Prototypic Production-Scale Fuel Fabrication Processes and Product Characteristics

An objective of the High Temperature Gas Reactor fuel development and qualification program for the United States Department of Energy has been to qualify fuel fabricated in prototypic production-scale equipment. The quality and characteristics of the tristructural isotropic coatings on fuel kernels are influenced by the equipment scale and processing parameters. Some characteristics affecting product quality were suppressed while others have become more significant in the larger equipment. Changes to the composition and method of producing resinated graphite matrix material has eliminated the use of hazardous, flammable liquids and enabled it to be procured as a vendor-supplied feed stock. A new method of overcoating TRISO particles with the resinated graphite matrix eliminates the use of hazardous, flammable liquids, produces highly spherical particles with a narrow size distribution, and attains product yields in excess of 99%. Compact fabrication processes have been scaled-up and automated with relatively minor changes to compact quality to manual laboratory-scale processes. The impact on statistical variability of the processes and the products as equipment was scaled are discussed. The prototypic production-scale processes produce test fuels that meet fuel quality specifications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluating the carbon footprint of the integrated DBD‐plasma bi‐reforming unit via laboratory scale experiments and scaled‐up process modeling

Catalytic dielectric barrier discharge (DBD) plasma reactor experiments were performed in a tubular glass reactor with a 2 mm gap at 550°C to facilitate the reaction kinetics of steam added dry reforming or bireforming. The best specific energy input obtained was 11.2 eV/molecule feed at CO 2 :CH 4 :H 2 O of 4.5:1:4.5 ratio and gas hour space velocity (GHSV) = 432 h −1 . This value was used to design a conceptual process and assess the environmental impact of methane steam reforming-based H 2 production 18.4 kmol/h CO 2 emission processing into H 2 :CO = 2 syngas, with an emphasis on the carbon footprint.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

BCSR on GPU: A Way Forward Extreme-scale Graph Processing on Accelerator-enabled Frontier Supercomputer

Handling large graphs in a distributed environment requires effective partitioning across processors and efficient management of local partitions. In 2D partitioning, local graphs often become too sparse, making memory-efficient data structures crucial. Using the Compressed Sparse Row (CSR) format wastes space, especially for > 83% of vertices with empty edges for the sparse graphs. This study explores bit-CSR (BCSR), a modified CSR representation, on GPUs to reduce memory usage in graph computations. We achieved 16.67% memory savings on a sparse rmat dataset with 268 million vertices and 357 million edges, without performance degradation, supported by both theoretical and experimental storage savings of 33%. However, we observed a 1.7× slowdown in degree lookup times due to bitwise operations on AMD CPUs. This analysis highlights the potential of BCSR on GPUs for improving Graph500 benchmark performance on GPU-accelerated systems, such as the Frontier supercomputer.

Sattar, Naw Safrin↗

Evaluation of Solid Sorbents As A Retrofit Technology for CO 2 Capture from Coal-Fired Power Plants

Through a U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) funded cooperative agreement DE-NT0005649, ADA Environmental Solutions (ADA) has begun evaluating the use of solid sorbents for CO 2 capture. The project objective was to address the viability and accelerate development of a solid-based CO 2 capture technology. To meet this objective, initial evaluations of sorbents and the process / equipment were completed. First the sorbents were evaluated using a temperature swing adsorption process at the laboratory scale in a fixed-bed apparatus. A slipstream reactor designed to treat flue gas produced by coal-fired generation of nominally 1 kWe was designed and constructed, which was used to evaluate the most promising materials on a more meaningful scale using actual flue gas. In a concurrent effort, commercial-scale processes and equipment options were also evaluated for their applicability to sorbent-based CO 2 capture. A cost analysis was completed that can be used to direct future technology development efforts.

20 FOSSIL-FUELED POWER PLANTS↗

Bench-Scale Silicone Process for Low-Cost CO 2 Capture (Final Technical and Economic Feasibility Report)

This report presents system and economic analysis for a carbon capture unit which uses an amino-silicone solvent for CO 2 capture and sequestration (CCS) in a pulverized coal (PC) boiler. The amino-silicone solvent is based on GAP-1 with tri-ethylene glycol (TEG) as a co-solvent. For comparison purposes, the report also shows results for a CCS unit based on a conventional approach using mono-ethanol amine (MEA). At a steam temperature of 395 °C (743 °F), the CCS energy penalty for amino-silicone solvent is only 30.4% which compares to a 35.9% energy penalty for MEA. The increase in COE for the amino-silicone solvent relative to the non-capture case is between 98% and 103% (depending on the solvent cost) which compares to an ~109% COE cost increase for MEA. In summary, the amino-silicone solvent has significant advantages over conventional systems using MEA.

20 FOSSIL-FUELED POWER PLANTS↗

Bench-Scale Silicone Process for Low-Cost CO 2 Capture

This report presents system and economic analysis for a carbon capture unit which uses an amino-silicone solvent for CO 2 capture and sequestration (CCS) in a pulverized coal (PC) boiler. The amino-silicone solvent is based on GAP-1 with Tri-Ethylene Glycol (TEG) as a co-solvent. The report also shows results for a CCS unit based on a conventional approach using mono-ethanol amine (MEA). Models were developed for both processes and used to calculate mass and energy balances. Capital costs and energy penalty were calculated for both systems, as well as the increase in cost of electricity. The amino-silicone solvent based system demonstrates significant advantages compared to the MEA system.

20 FOSSIL-FUELED POWER PLANTS↗

Pilot-Scale Silicone Process for Low-Cost Carbon Dioxide Capture Preliminary Techno-Economic Analysis

This report presents system and economic analysis for a carbon-capture unit which uses an aminosilicone-based solvent for CO{sub 2} capture in a pulverized coal (PC) boiler. The aminosilicone solvent is a 60/40 wt/wt mixture of 3-aminopropyl end-capped polydimethylsiloxane (GAP-1m) with tri-ethylene glycol (TEG) as a co-solvent. For comparison purposes, the report also shows results for a carbon-capture unit based on a conventional approach using mono-ethanol amine (MEA). The first year removal cost of CO{sub 2} for the aminosilicone-based carbon-capture process is $46.04/ton of CO2 as compared to $60.25/ton of CO{sub 2} when MEA is used. The aminosilicone-based process has <77% of the CAPEX of a system using MEA solvent. The lower CAPEX is due to several factors, including the higher working capacity of the aminosilicone solvent compared the MEA, which reduces the solvent flow rate required, reducing equipment sizes. If it is determined that carbon steel can be used in the rich-lean heat exchanger in the carbon capture unit, the first year removal cost of CO{sub 2} decreases to $44.12/ton. The aminosilicone-based solvent has a higher thermal stability than MEA, allowing desorption to be conducted at higher temperatures and pressures, decreasing the number of compressor stages needed. The aminosilicone-based solvent also has a lower vapor pressure, allowing the desorption to be conducted in a continuous-stirred tank reactor versus a more expensive packed column. The aminosilicone-based solvent has a lower heat capacity, which decreases the heat load on the desorber. In summary, the amino-silicone solvent has significant advantages over conventional systems using MEA.

54 ENVIRONMENTAL SCIENCES↗

Pilot-Scale Silicone Process for Low-Cost Carbon Dioxide Capture

This report presents system and economicanalysis for a carbon-capture unit which uses an aminosilicone-based solvent for CO₂ capture in a pulverized coal (PC) boiler. The aminosilicone solvent is a 60/40 wt/wt mixture of 3-aminopropyl end-capped polydimethylsiloxane (GAP-1m) with tri-ethylene glycol (TEG) as a co-solvent. Forcomparison purposes, the report also shows results for a carbon-capture unit based on a conventional approach using mono-ethanol amine (MEA). The first year removal cost of CO₂ for the aminosilicone-based carbon-capture process is $46.04/ton of CO₂ as compared to $60.25/ton of CO₂ when MEA is used. The aminosilicone- based process has <77% of the CAPEX of a system using MEA solvent. The lower CAPEX is due to several factors, including the higher working capacity of the aminosilicone solvent compared the MEA, which reduces the solvent flow rate required, reducing equipment sizes. If it is determined that carbon steel can be used in the rich-lean heat exchanger in the carbon capture unit, the first year removal cost of CO₂ decreases to $44.12/ton. The aminosilicone-based solvent has a higherthermal stability than MEA, allowing desorption to be conducted at higher temperatures and pressures, decreasing the number of compressor stages needed. The aminosilicone-based solvent also has a lowervapor pressure, allowing the desorption to be conducted in a continuous-stirred tank reactor versus a more expensive packed column. The aminosilicone-based solvent has a lowerheat capacity, which decreases the heat load on the desorber. In summary, the amino-silicone solvent has significant advantages overconventional systems using MEA.

Singh, Surinder↗

Cloud computing method for dynamically scaling a process across physical machine boundaries

A cloud computing platform includes first device having a graph or tree structure with a node which receives data. The data is processed by the node or communicated to a child node for processing. A first node in the graph or tree structure determines the reconfiguration of a portion of the graph or tree structure on a second device. The reconfiguration may include moving a second node and some or all of its descendant nodes. The second and descendant nodes may be copied to the second device.

Gillen, Robert E.↗

Simulating weather regimes: impact of model resolution and stochastic parameterization

The simulation of quasi-persistent regime structures in an atmospheric model with horizontal resolution typical of the Intergovernmental Panel on Climate Change fifth assessment report simulations, is shown to be unrealistic. A higher resolution configuration of the same model, with horizontal resolution typical of that used in operational numerical weather prediction, is able to simulate these regime structures realistically. The spatial patterns of the simulated regimes are remarkably accurate at high resolution. A model configuration at intermediate resolution shows a marked improvement over the low-resolution configuration, particularly in terms of the temporal characteristics of the regimes, but does not produce a simulation as accurate as the very-high-resolution configuration. It is demonstrated that the simulation of regimes can be significantly improved, even at low resolution, by the introduction of a stochastic physics scheme. At low resolution the stochastic physics scheme drastically improves both the spatial and temporal aspects of the regimes simulation. These results highlight the importance of small-scale processes on large-scale climate variability, and indicate that although simulating variability at small scales is a necessity, it may not be necessary to represent the small-scales accurately, or even explicitly, in order to improve the simulation of large-scale climate. It is argued that these results could have important implications for improving both global climate simulations, and the ability of high-resolution limited-area models, forced by low-resolution global models, to reliably simulate regional climate change signals.

Meteorology & Atmospheric Sciences↗