Search NASA⌕ Search

SEARCH · Search NASA

Results for “Producibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Experimental Validation and Continuous Testing of an On-Purpose High-Yield Pitch Synthesis Process for Producing Carbon Fiber from US Domestic Coal

This project aims to develop technology that converts domestic United States (US) raw coal to high quality, high value, and marketable carbon fiber. More specifically, the project aims to significantly improve the selectivity and yield of carbon fiber produced per ton of coal over conventional coal pitch-based production by using low-severity direct coal conversion technology to maximize the yield of pitch from coal, suitable for production of carbon fiber. To meet the stated objective of developing a technology platform, capable of producing high quality, high-value and marketable carbon fiber from domestic US coal, the proposed scope of work involves testing of a low-severity direct coal liquefaction (LS-DCL) process approach. The isotropic pitch produced from the LS-DCL process will be thermally treated using conventional processes to convert to a liquid crystal or “mesophase” pitch as a precursor for structural carbon fibers. This mesophase pitch will then be melt-spun into fiber, oxygen stabilized, and carbonized using conventional processes. The resulting carbon fiber will be evaluated for mechanical properties and suitability for structural applications such as automotive parts and spars for wind turbine blades. The overall process is expected to significantly lower the cost of fiber compared to state of the art fibers produced from polyacrylonitrile (PAN) precursors.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Characterizing Radium Distributions, Source Attribution and Impacts from Marcellus Produced Water

This presentation characterizes spatial trends in radium (Ra) concentrations, sources, and potential impacts generated from Marcellus Shale produced waters. Here, we combine previously published produced water data with additional Ra activity measurements extracted from residual waste reports submitted to the Pennsylvania Department of Environmental Protection from 2012-2023. This is the largest, spatially referenced compilation of Ra activity measurements from produced water sourced from the Marcellus Shale to date. The median Marcellus Shale produced water Ra activity presented here is 6,906 pCi/L (interquartile range = 12,515 pCi/L). Radium activities in the positively skewed dataset can exceed 30,000 pCi/L in some parts of the state. The regional trends in Ra concentrations and isotopic ratios will be characterized and potential environmental and health implications discussed.

Mackey, Justin↗
DOE OSTI2025

Estimating the Total Value Proposition of Coal Fly Ash and Produced Water

Here we describe the total potential "sale" value of produced water and coal fly ash due to the mineral content they contain. Produced water is water that is co-produced during oil and gas operations. Coal fly ash is the solid powder that remains after coal is burned. Both coal fly ash and produced water matter partly because of they contain critical minerals that have economic value and could be extracted. Here we calculate the total potential value of all the mineral products, critical minerals and other products such as salts, so that we can gain a more complete economic outlook on both feedstocks. Poster presented at the American Geophysical Union (AGU) Annual Meeting held in New Orleans, Louisiana, December 15 to 19, 2025.

critical minerals, lithium, rare earth elements↗
DOE OSTI2024

Comprehensive Economic Impacts ofWild Pigs on Producers of Six Crops in the South-Eastern US and California

Wild pigs (Sus scrofa) cause damage to agricultural crops in their native range as well as in the portions of the globe where they have been introduced. In the US, states with the highest introduced wild pig populations are Alabama, Arkansas, California, Florida, Georgia, Louisiana, Mississippi, Missouri, North Carolina, South Carolina, and Texas. The present study summarizes the first survey-based effort to value the full extent of wild pig damage to producers of six crops in these eleven US states. The survey was distributed by the USDA National Agricultural Statistical Service in the summer of 2022 to a sample of 11,495 producers of corn (Zea mays), soybeans (Glycine max), wheat (Triticum spp.), rice (Oryza sativa), peanuts (Arachis hypogaea), and sorghum (Sorghum bicolor) in these 11 states. Our findings suggest that the economic burden of wild pigs on producers of these crops is substantial and not limited to the direct and most identifiable categories of crop damage (i.e., production value lost due to depredation, trampling and rooting). We estimate that the annual cost to producers of these six crops in the surveyed states in 2021 was almost USD 700 million.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Gamma Rays as a Signature of r -process Producing Supernovae: Remnants and Future Galactic Explosions

We consider the question of whether core-collapse supernovae (CCSNe) can produce rapid neutron capture process (r-process) elements and how future MeV gamma-ray observations could address this. Rare types of CCSNe characterized by substantial magnetic fields and rotation, known as magnetorotational supernovae (MR-SNe), are theoretically predicted to produce these elements, although direct observational evidence is lacking. We suggest that this critical question be addressed through the study of some of the 11 CCSN remnants located within 10 kpc, as well as through the detection of gamma-ray emission from a future Galactic supernova. We use a two-dimensional MR-SN model to estimate the expected gamma flux stemming from nuclear decays in the range of a few tens of keV to a few MeV. Our results indicate that an observation of 126 Sn ( 126 Sb) in a remnant stands out as a signature of an r-process-producing supernova. Since the neutron-rich conditions that lead to the production of the r-process could also enhance the production of 60 Fe, the detection of substantial 60 Fe ( 60 Co) would be indicative of favorable conditions for the r-process. In the case of a future supernova explosion, when the evolution of the spectrum is studied over 10 days to a few years, a rich picture emerges. At various epochs, the second peak r-process isotopes such as 125 Sn, 131 I, 132 Te, 132 I, and 140 La produce signals that are not obscured by the gamma emission from explosive burning products and electron–positron annihilation. The weak r-process isotopes 95 Nb, 103 Ru, and 106 Rh also have periods of prominence.

Gamma-rays↗
NASA NTRS1970

Cyclotron production of I-123: An evaluation of the nuclear reactions which produce this isotope

The use of the various nuclear reactions is described by which I-123,a low radiation dose radiopharmaceutical, can be cyclotron-produced. Methods of directly producing I-123 and those which indirectly produce the radionuclide through the beta (+) decay of its nautral precursor, Xe-123. It is impossible to separate from the radioiodine contaminants, notably I-124, which occur in the direct method. Thus, it is preferable to produce pure I-123 from Xe-123 which is easily separated from the radioiodines. Among the characteristics of I-123 is the capability of reducing the patient dose in a thyroid uptake measurement to a very small percentage of that delivered by the more commonly used I-131.

Sodd, V. J.↗
NASA NTRS1979

The radiation field wave forms produced by intracloud lightning discharge processes

The large-amplitude radiation field pulses produced by intracloud lightning discharge processes have been recorded with submicrosecond time resolution. The wave forms are distinctly different from those produced by return strokes in cloud-to-ground lightning, yet they are surprisingly alike within a discharge and in different discharges. The shapes tend to be bipolar, with two or three narrow, fast-rising pulses superimposed on the initial half cycle. Pulses with a positive initial polarity are usually produced in the several tens of milliseconds prior to the first return stroke in a cloud-to-ground discharge. Positive pulses tend to occur at regular intervals and have a mean full width of about 40 + or - 13 microsec. Negative pulses are usually produced during isolated cloud discharges at more random intervals and have shapes similar to the positive pulses but with more variability. The implications of the field shapes and polarities for the physics of intracloud discharge processes are discussed.

Weidman, C. D.↗
NASA NTRS1981

Facility produced charge-exchange ions

These facility produced ions are created by charge-exchange collisions between neutral atoms and energetic thruster beam ions. The result of the electron transfer is an energetic neutral atom and an ion of only thermal energy. There are true charge-exchange ions produced by collisions with neutrals escaping from the ion thruster and being charge-exchange ionized before the neutral intercepts the tank wall. The facility produced charge-exchange ions will not exist in space and therefore, represent a source of error where measurements involving ion thruster plasmas and their density are involved. The quantity of facility produced ions in a test chamber with a 30 cm mercury ion thruster was determined.

Carruth, M. R., Jr.↗
NASA NTRS1984

Comparison of solar flare X-ray producing and escaping electrons from about 2 to 100 keV

Using observations from the ISEE-3 spacecraft, the X-ray producing electrons and escaping electons from a solar flare on November 8, 1978 are compared. The instantaneous 5 to 75 keV electron spectrum in the X-ray producing region is computed from the observed bremsstrahlung X-ray spectrum. Assuming that energy loss by Coulomb collisions (thick target) is the dominant electron loss process, the accelerated electron spectrum is obtained. The energy spectrum of the escaping electrons observed from 2 to 100 keV differs significantly from the spectra of the X-ray producing electrons and of the accelerated electrons, even when the energy loss which the escaping electrons experienced during their travel from the sun to the earth is taken into account. The observations are consistent with a model where the escaping electons come from an extended X-ray producing region, which ranges from the chromosphere to high in the corona. In this model, the low energy escaping electrons (2-10 keV) come from the higher part of the extended X-ray source where the overlying column density is low, while the high energy electrons (20-100 keV) come from the entire X-ray source.

Pan, L.-D.↗
NASA NTRS1985

Measurement of the heat produced internally during discharge by the 6V Eveready Energizer Battery, no. 528

When a 6V Eveready Energizer Battery, 528, is discharged, heat is produced internally within the battery itself. Detailed measurements of this battery heat were made for a five day discharge period using a load resistance of 20 ohms and an ambient temperature of 10 C. The battery heat produced per quarter day varied considerably, ranging from 1.08 watt-hrs to 2.63 watt-hrs. The total battery heat produced, using a 3.0 volt cutoff, is significant (37 watt-hrs) when compared to the total load heat produced (70 watt-hrs).

F. D. Hooker↗
NASA NTRS1988

Does subduction zone magmatism produce average continental crust

The question of whether present day subduction zone magmatism produces material of average continental crust composition, which perhaps most would agree is andesitic, is addressed. It was argued that modern andesitic to dacitic rocks in Andean-type settings are produced by plagioclase fractionation of mantle derived basalts, leaving a complementary residue with low Rb/Sr and a positive Eu anomaly. This residue must be removed, for example by delamination, if the average crust produced in these settings is andesitic. The author argued against this, pointing out the absence of evidence for such a signature in the mantle. Either the average crust is not andesitic, a conclusion the author was not entirely comfortable with, or other crust forming processes must be sought. One possibility is that during the Archean, direct slab melting of basaltic or eclogitic oceanic crust produced felsic melts, which together with about 65 percent mafic material, yielded an average crust of andesitic composition.

Ellam, R. M.↗
NASA NTRS1991

Investigating combustion as a method of processing inedible biomass produced in NASA's biomass production chamber

The Controlled Ecological Life Support System (CELSS) Breadboard Project at the John F. Kennedy Space Center is a research program to integrate and evaluate biological processes to provide air, water, and food for humans in closed environments for space habitation. This project focuses on the use of conventional crop plants as grown in the Biomass Production Chamber (BPC) for the production and recycling of oxygen, food, and water. The inedible portion of these crops has the potential to be converted to edible biomass or directly to the elemental constituents for direct recycling. Converting inedible biomass directly, by combustion, to carbon dioxide, water, and minerals could provide a baseline for estimating partitioning of the mass balance during recycling in a CELSS. Converting the inedible biomass to carbon dioxide and water requires the same amount of oxygen that was produced by photosynthesis. The oxygen produced during crop growth is just equal to the oxygen required to oxidize all the biomass produced during growth. Thus, the amount of oxygen produced that is available for human consumption is in proportion to the amount of biomass actually utilized by humans. The remaining oxygen must be available to oxidize the rest of the biomass back to carbon dioxide and water or the system will not be a regenerative one.

Dreschel, T. W.↗
NASA NTRS1991

An investigation to determine the producibility of a 3-D braider and bias direction weaving loom

The development of prototype machines for the production of generalized braid patterns is described. Mechanical operating principles and control strategies are presented for two prototype machines which were fabricated and evaluated. Both machines represent advances over current techniques for forming composite material preforms by enabling near ideal control of fiber orientation. Furthermore, they overcome both the lack of general control of produced fiber architectures and the complexity of other weaving processes that were produced for the same purpose. One prototype, the modified Farley braider, consists of an array of turntables which can be rotated 90 degrees and returned; hence, they can form tracks in the x and y axis. Yarn ends are transported about the surface formed by the turntables using motorized tractors. These tractors are controlled using an optical link with a control circuit and host computer. The tractors are powered through electrical contact with the turntables. The necessary relative motions are produced by a series of linear tractor moves combined with a sequence of turntable rotations. The movement of the tractors about the surface causes the yarns to produce the desired braiding pattern. The second device, the shuttle plate braider, consists of a braiding surface formed by an array of square elements, each separated from its neighbor by a gap. Beneath this surface lies a shuttle plate, which reciprocates first in one axis and then in the other. As this movement takes place, yarn carrying shuttles engage and disengage the plate by means of solenoid activated pins. By selective engagement and disengagement, the shuttles can move the yarn ends in any desired pattern, forming the desired braid. Control power, and control signals, are transmitted from the electronic interface circuit and host computer, via the braiding surface through electrical contact with the shuttles. Motive power is proved to the shuttles by motion of the shuttle plate, which is passively driven using pneumatic rams. Each shuttle is a simple device that uses only a solenoid to engage the plate and is a simple device that uses only a solenoid to engage the plate and is independently controllable. When compared with each other, the modified Farley braider has the advantage of speed, and the shuttle plate braider the advantage of mechanical control and simplicity.

Huey, Cecil O., Jr.↗
NASA NTRS1993

Producing approximate answers to database queries

We have designed and implemented a query processor, called APPROXIMATE, that makes approximate answers available if part of the database is unavailable or if there is not enough time to produce an exact answer. The accuracy of the approximate answers produced improves monotonically with the amount of data retrieved to produce the result. The exact answer is produced if all of the needed data are available and query processing is allowed to continue until completion. The monotone query processing algorithm of APPROXIMATE works within the standard relational algebra framework and can be implemented on a relational database system with little change to the relational architecture. We describe here the approximation semantics of APPROXIMATE that serves as the basis for meaningful approximations of both set-valued and single-valued queries. We show how APPROXIMATE is implemented to make effective use of semantic information, provided by an object-oriented view of the database, and describe the additional overhead required by APPROXIMATE.

Vrbsky, Susan V.↗
NASA NTRS1990

A laboratory means to produce tough aluminum sheet from powder

The rapid solidification of aluminum alloys as powder and the subsequent fabrication processes can be used to develop and tailor alloys to satisfy specific aerospace design requirements, including high strength and toughness. Laboratory procedures to produce aluminum powder-metallurgy (PM) materials are efficient but require evidence that the laboratory methods used can produce a product with superior properties. This paper describes laboratory equipment and procedures which can be used to produce tough aluminum PM sheet. The processing of a 2124 + 0.9 percent Zr aluminum alloy powder is used as an example. The fully hardened sheet product is evaluated in terms of properties and microstructure. The key features of the vacuum hot press pressing operation used to consolidate the powder are described. The 2124 + 0.9 percent Zr - T8 temper aluminum sheet produced was both strong (460-490 MPa yield strength) and tough (Kahn Tear unit-propagation- energy values over three times those typical for ingot metallurgy 2024-T81). Both the longitudinal and longitudinal-transverse directions of the sheet were tested. The microstructure was well refined with subgrains of one or two micrometers. Fine dispersoids of Al3Zr in the precipitate free regions adjacent to boundaries are believed to contribute to the improved toughness.

Singleton, O. R.↗
NASA NTRS1993

Calderas produced by hydromagmatic eruptions through permafrost in northwest Alaska

Most hydromagmatic eruptions on Earth are generated by interactions of lava and ground or surface water. This eruptive process typically produces craters 0.1-1 km in diameter, although a few as large as 1-2 km were described. In contrast, a series of Pleistocene hydromagmatic eruptions through 80-100-m-thick permafrost on the Seward Peninsula of Alaska produced four craters 3-8 km in diameter. These craters, called the Espenberg maars, are the four largest maars known on Earth. The thermodynamic properties of ground ice influence the rate and amount of water melted during the course of the eruption. Large quantities of water are present, but only small amounts can be melted at any time to interact with magma. This would tend to produce sustained and highly explosive low water/magma (fuel-coolant) ratios during the eruptions. An area of 400 km(sub 2) around the Alaskan maars shows strong reductions in the density of thaw lakes, ground ice, and other surface manifestations of permafrost because of deep burial by coeval tephra falls. The unusually large Espenberg maars are the first examples of calderas produced by hydromagmatic eruptions. These distinctive landforms can apparently be used as an indicator of the presence of permafrost at the time of eruption.

Beget, J. E.↗
NASA NTRS1993

Digital camera with apparatus for authentication of images produced from an image file

A digital camera equipped with a processor for authentication of images produced from an image file taken by the digital camera is provided. The digital camera processor has embedded therein a private key unique to it, and the camera housing has a public key that is so uniquely based upon the private key that digital data encrypted with the private key by the processor may be decrypted using the public key. The digital camera processor comprises means for calculating a hash of the image file using a predetermined algorithm, and second means for encrypting the image hash with the private key, thereby producing a digital signature. The image file and the digital signature are stored in suitable recording means so they will be available together. Apparatus for authenticating at any time the image file as being free of any alteration uses the public key for decrypting the digital signature, thereby deriving a secure image hash identical to the image hash produced by the digital camera and used to produce the digital signature. The apparatus calculates from the image file an image hash using the same algorithm as before. By comparing this last image hash with the secure image hash, authenticity of the image file is determined if they match, since even one bit change in the image hash will cause the image hash to be totally different from the secure hash.

Friedman, Gary L.↗
NASA NTRS1994

A facility to produce an energetic, ground state atomic oxygen beam for the simulation of the Low-Earth Orbit environment

Because of the continuing commitment to activity in low-Earth orbit (LEO), a facility is under development to produce energetic atmospheric species, particularly atomic oxygen, with energies ranging from 5 to 80 eV. This relatively high flux facility incorporates an ion engine to produce the corresponding specie ion which is charge exchanged to produce a neutral atomic beam. Ion fluxes of around 10(exp 15) sec(exp -1) with energies of 20-70 eV have been achieved. A geometrically augmented inertially tethered charge exchanger (GAITCE) was designed to provide a large column depth of charge exchange gas while reducing the gas load to the low pressure portion of the atomic beam facility. This is accomplished using opposed containment jets which act as collisional barriers to the escape of the dense gas region formed between the jets. Leak rate gains to the pumping system on the order of 10 were achieved for moderate jet mass flows. This system provides an attractive means for the charge exchange of atomic ions with a variety of gases to produce energetic atomic beams.

Ketsdever, Andrew D.↗