Application of a modified fast Fourier transform to calculate human operator describing functions
Modified fast Fourier transform for hybrid computer program data processing of human operator describing functions
Shirley, R. S.↗
SEARCH · Search NASA
Results for “Program Transformation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Automated cloud tracking using precisely aligned digital ATS pictures.
Discussion of the interactive man-computer system (WIMDCO) for measuring cloud motion from ATS pictures. The multipicture model of ATS navigation is used for consecutive ATS digital picture alignment to provide the required precision in cloud motion measurements by automated tracking techniques. Cloud motion is measured by tracking clouds between two digital pictures with the aid of two-dimensional cross correlation analysis. The fast Fourier transform method and other programming techniques are used for time and cost minimization. Cloud motion vectors were computed over three time intervals in July, 1969. The EW and NS components were reproducible within roughly 2 knots.
Smith, E. A.↗
Theoretical prediction of interference loading on aircraft stores: Part II - Supersonic speeds
Linear theory is used, without two dimensional or slender body assumptions, to predict flow field produced by aircraft wing, nose, inlet, and pylons. Aircraft shock wave locations are predicted, and their effect on flow field is included through transformation of aircraft geometry. Program was written in FORTRAN IV for CDC 6400 computer.
Fox, C. H., Jr.↗
Analytical Solutions for Non-Linear Differential Equations with the Help of a Digital Computer
A technique was developed with the help of a digital computer for analytic (algebraic) solutions of autonomous and nonautonomous equations. Two operational transform techniques have been programmed for the solution of these equations. Only relatively simple nonlinear differential equations have been considered. In the cases considered it has been possible to assimilate the secular terms into the solutions. For cases where f(t) is not a bounded function, a direct series solution is developed which can be shown to be an analytic function. All solutions have been checked against results obtained by numerical integration for given initial conditions and constants. It is evident that certain nonlinear differential equations can be solved with the help of a digital computer.
Cromwell, P. C.↗
The properties of the Neckel-Chini VRI system
Cousins (1980) data for 54 of the standard stars of Neckel and Chini (1980) and published measurements are used to investigate the properties of the Neckel-Chini VRI system. For red stars, this system diverges from the Johnson (1962) system, despite frequent claims of identity between the two. The Neckel-Chini and Cousins systems, however, are closely comparable. Both of these conclusions were previously reached in a paper by Bessell (1983); fair to good quantitative agreement with his results are obtained. Reddening ratios, the scatter in the Neckel-Chini standard-star data, and the effect of this scatter on published measurements for program stars, are discussed. Transformations from the Neckel-Chini system to the Cousins system are given.
Taylor, Benjamin J.↗
Masking failures of multidimensional sensors (extended abstract)
When a computer monitors a physical process, the computer uses sensors to determine the values of the physical variables that represent the state of the process. A sensor can sometimes fail, however, and in the worst case report a value completely unrelated to the true physical value. The work described is motivated by a methodology for transforming a process control program that can not tolerate sensor failure into one that can. In this methodology, a reliable abstract sensor is created by combining information from several real sensors that measure the same physical value. To be useful, an abstract sensor must deliver reasonably accurate information at reasonable computational cost. Sensors are considered that deliver multidimensional values (e.g., location or velocity in three dimensions, or both temperature and pressure). Geometric techniques are used to derive upper bounds on abstract sensor accuracy and to develop efficient algorithms for implementing abstract sensors.
Chew, Paul↗
Automatic differentiation evaluated as a tool for rotorcraft design and optimization
This paper investigates the use of automatic differentiation (AD) as a means for generating sensitivity analyses in rotorcraft design and optimization. This technique transforms an existing computer program into a new program that performs sensitivity analysis in addition to the original analysis. The original FORTRAN program calculates a set of dependent (output) variables from a set of independent (input) variables, the new FORTRAN program calculates the partial derivatives of the dependent variables with respect to the independent variables. The AD technique is a systematic implementation of the chain rule of differentiation, this method produces derivatives to machine accuracy at a cost that is comparable with that of finite-differencing methods. For this study, an analysis code that consists of the Langley-developed hover analysis HOVT, the comprehensive rotor analysis CAMRAD/JA, and associated preprocessors is processed through the AD preprocessor ADIFOR 2.0. The resulting derivatives are compared with derivatives obtained from finite-differencing techniques. The derivatives obtained with ADIFOR 2.0 are exact within machine accuracy and do not depend on the selection of step-size, as are the derivatives obtained with finite-differencing techniques.
Walsh, Joanne L.↗
Optimization Issues with Complex Rotorcraft Comprehensive Analysis
This paper investigates the use of the general purpose automatic differentiation (AD) tool called Automatic Differentiation of FORTRAN (ADIFOR) as a means of generating sensitivity derivatives for use in Boeing Helicopter's proprietary comprehensive rotor analysis code (VII). ADIFOR transforms an existing computer program into a new program that performs a sensitivity analysis in addition to the original analysis. In this study both the pros (exact derivatives, no step-size problems) and cons (more CPU, more memory) of ADIFOR are discussed. The size (based on the number of lines) of the VII code after ADIFOR processing increased by 70 percent and resulted in substantial computer memory requirements at execution. The ADIFOR derivatives took about 75 percent longer to compute than the finite-difference derivatives. However, the ADIFOR derivatives are exact and are not functions of step-size. The VII sensitivity derivatives generated by ADIFOR are compared with finite-difference derivatives. The ADIFOR and finite-difference derivatives are used in three optimization schemes to solve a low vibration rotor design problem.
Walsh, Joanne L.↗
The 'Biologically-Inspired Computing' Column
The field of Biology changed dramatically in 1953, with the determination by Francis Crick and James Dewey Watson of the double helix structure of DNA. This discovery changed Biology for ever, allowing the sequencing of the human genome, and the emergence of a "new Biology" focused on DNA, genes, proteins, data, and search. Computational Biology and Bioinformatics heavily rely on computing to facilitate research into life and development. Simultaneously, an understanding of the biology of living organisms indicates a parallel with computing systems: molecules in living cells interact, grow, and transform according to the "program" dictated by DNA. Moreover, paradigms of Computing are emerging based on modelling and developing computer-based systems exploiting ideas that are observed in nature. This includes building into computer systems self-management and self-governance mechanisms that are inspired by the human body's autonomic nervous system, modelling evolutionary systems analogous to colonies of ants or other insects, and developing highly-efficient and highly-complex distributed systems from large numbers of (often quite simple) largely homogeneous components to reflect the behaviour of flocks of birds, swarms of bees, herds of animals, or schools of fish. This new field of "Biologically-Inspired Computing", often known in other incarnations by other names, such as: Autonomic Computing, Pervasive Computing, Organic Computing, Biomimetics, and Artificial Life, amongst others, is poised at the intersection of Computer Science, Engineering, Mathematics, and the Life Sciences. Successes have been reported in the fields of drug discovery, data communications, computer animation, control and command, exploration systems for space, undersea, and harsh environments, to name but a few, and augur much promise for future progress.
Hinchey, Mike↗
Pointing History Engine for the Spitzer Space Telescope
The Pointing History Engine (PHE) is a computer program that provides mathematical transformations needed to reconstruct, from downlinked telemetry data, the attitude of the Spitzer Space Telescope (formerly known as the Space Infrared Telescope Facility) as a function of time. The PHE also serves as an example for development of similar pointing reconstruction software for future space telescopes. The transformations implemented in the PHE take account of the unique geometry of the Spitzer telescope-pointing chain, including all data on relative alignments of components, and all information available from attitude-determination instruments. The PHE makes it possible to coordinate attitude data with observational data acquired at the same time, so that any observed astronomical object can be located for future reference and re-observation. The PHE is implemented as a subroutine used in conjunction with telemetry-formatting services of the Mission Image Processing Laboratory of NASA s Jet Propulsion Laboratory to generate the Boresight Pointing History File (BPHF). The BPHF is an archival database designed to serve as Spitzer s primary astronomical reference documenting where the telescope was pointed at any time during its mission.
Bayard, David↗
Enabling Wireless Avionics Intra-Communications
The Electromagnetics and Sensors Branch of NASA Langley Research Center (LaRC) is investigating the potential of an all-wireless aircraft as part of the ECON (Efficient Reconfigurable Cockpit Design and Fleet Operations using Software Intensive, Networked and Wireless Enabled Architecture) seedling proposal, which is funded by the Convergent Aeronautics Solutions (CAS) project, Transformative Aeronautics Concepts (TAC) program, and NASA Aeronautics Research Institute (NARI). The project consists of a brief effort carried out by a small team in the Electromagnetic Environment Effects (E3) laboratory with the intention of exposing some of the challenges faced by a wireless communication system inside the reflective cavity of an aircraft and to explore potential solutions that take advantage of that environment for constructive gain. The research effort was named EWAIC for "Enabling Wireless Aircraft Intra-communications." The E3 laboratory is a research facility that includes three electromagnetic reverberation chambers and equipment that allow testing and generation of test data for the investigation of wireless systems in reflective environments. Using these chambers, the EWAIC team developed a set of tests and setups that allow the intentional variation of intensity of a multipath field to reproduce the environment of the various bays and cabins of large transport aircraft. This setup, in essence, simulates an aircraft environment that allows the investigation and testing of wireless communication protocols that can effectively be used as a tool to mitigate some of the risks inherent to an aircraft wireless system for critical functions. In addition, the EWAIC team initiated the development of a computational modeling tool to illustrate the propagation of EM waves inside the reflective cabins and bays of aircraft and to obtain quantifiable information regarding the degradation of signals in aircraft subassemblies. The nose landing gear of a UAV CAD model was used to model the propagation of a system in a "deployed" configuration versus a "stowed" configuration. The differences in relative field strength provide valuable information about the distribution of the field that can be used to engineer RF links with optimal radiated power and antenna configuration that accomplish the intended system reliability. Such modeling will be necessary in subsequent studies for managing multipath propagation characteristics inside a main cabin and to understand more complex environments, such as the inside wings, landing gear bays, cargo bays, avionics bays, etc. The results of the short research effort are described in the present document. The team puts forth a set of recommendations with the intention of informing the project and program leadership of the future work that, in the opinion of the EWAIC team, would assist the ECON team reach the intended goal of developing an all-wireless aircraft.
Torres, Omar↗
Simulations of the NASA Langley 14- by 22-Foot Subsonic Tunnel for the Juncture Flow Experiment
NASA’s Transformational Tools and Technologies Program’s Juncture Flow experiment aims to provide data to improve Computational Fluid Dynamics (CFD) modeling in the juncture flow region. The experiment is planned to provide validation-quality data for CFD that focuses on the separation bubble near the wing-body juncture trailing edge region. Because wind tunnel tests associated with the Juncture Flow project have been designed for the purpose of CFD validation, considerable effort is going into modeling and simulating the wind tunnel. This is not only important because wind tunnel wall effects can play a role in integrated testing uncertainties, but also because the better the boundary conditions are known, the better CFD can accurately represent the experiment. This paper builds on the recent CFD efforts to model the NASA Langley 14- by 22-Foot Subsonic Tunnel. Current best practices in simulating wind tunnels are evaluated. The features of each method, as well as some of their pros and cons, are highlighted. Boundary conditions and modeling techniques currently used by CFD for empty-tunnel simulations are also described. Preliminary CFD studies associated with modeling the Juncture Flow model are summarized, with the intention to determine sensitivities of the flow near the wing-body juncture region of the model to a variety of modeling decisions.
Subsonic↗
Post-Flight Estimation of Motion of Space Structures: Part 1
A computer program estimates the relative positions and orientations of two space structures from data on the angular positions and distances of fiducial objects on one structure as measured by a target tracking electronic camera and laser range finders on another structure. The program is written specifically for determining the relative alignments of two antennas, connected by a long truss, deployed in outer space from a space shuttle. The program is based partly on transformations among the various coordinate systems involved in the measurements and on a nonlinear mathematical model of vibrations of the truss. The program implements a Kalman filter that blends the measurement data with data from the model. Using time series of measurement data from the tracking camera and range finders, the program generates time series of data on the relative position and orientation of the antennas. A similar program described in a prior NASA Tech Briefs article was used onboard for monitoring the structures during flight. The present program is more precise and designed for use on Earth in post-flight processing of the measurement data to enable correction, for antenna motions, of scientific data acquired by use of the antennas.
Brugarolas, Paul↗
Software for Displaying High-Frequency Test Data
An easy-to-use, intuitive computer program was written to satisfy a need of test operators and data requestors to quickly view and manipulate high-frequency test data recorded at the East and West Test Areas at Marshall Space Flight Center. By enabling rapid analysis, this program makes it possible to reduce times between test runs, thereby potentially reducing the overall cost of test operations. The program can be used to perform quick frequency analysis, using multiple fast- Fourier-transform windowing and amplitude options. The program can generate amplitude-versus-time plots with full zoom capabilities, frequency-component plots at specified time intervals, and waterfall plots (plots of spectral intensity versus frequency at successive small time intervals, showing the changing frequency components over time). There are options for printing of the plots and saving plot data as text files that can be imported into other application programs. The program can perform all of the aforementioned plotting and plot-data-handling functions on a relatively inexpensive computer; other software that performs the same functions requires computers with large amounts of power and memory.
Elmore, Jason L.↗
A Dose of Reality: Radiation Analysis for Realistic Human Spacecraft
INTRODUCTION As with most computational analyses, a tradeoff exists between problem complexity, resource availability and response accuracy when modeling radiation transport from the source to a detector. The largest amount of analyst time for setting up an analysis is often spent ensuring that any simplifications made have minimal impact on the results. The vehicle shield geometry of interest is typically simplified from the original CAD design in order to reduce computation time, but this simplification requires the analyst to "re-draw" the geometry with a limited set of volumes in order to accommodate a specific radiation transport software package. The resulting low-fidelity geometry model cannot be shared with or compared to other radiation transport software packages, and the process can be error prone with increased model complexity. The work presented here demonstrates the use of the DAGMC (Direct Accelerated Geometry for Monte Carlo) Toolkit from the University of Wisconsin, to model the impacts of several space radiation sources on a CAD drawing of the US Lab module. METHODS The DAGMC toolkit workflow begins with the export of an existing CAD geometry from the native CAD to the ACIS format. The ACIS format file is then cleaned using SpaceClaim to remove small holes and component overlaps. Metadata is then assigned to the cleaned geometry file using CUBIT/Trelis from csimsoft (Registered Trademark). The DAGMC plugin script removes duplicate shared surfaces, facets the geometry to a specified tolerance, and ensures that the faceted geometry is water tight. This step also writes the material and scoring information to a standard input file format that the analyst can alter as desired prior to running the radiation transport program. The scoring results can be transformed, via python script, into a 3D format that is viewable in a standard graphics program. RESULTS The CAD model of the US Lab module of the International Space Station, inclusive of all the racks and components, was simplified to remove holes and volume overlaps. Problematic features within the drawing were also removed or repaired to prevent runtime issues. The cleaned drawing was then run through the DAGMC workflow to prepare for analysis. Pilot tests modeling transport of 1GeV proton and 800MeV/A oxygen sources show that reasonable results are converged upon in an acceptable amount of overall computation time from drawing preparation to data analysis. The FLUKA radiation transport code will next be used to model both a GCR and a trapped radiation source. These results will then be compared with measurements that have been made by the radiation instrumentation deployed inside the US Lab module. DISCUSSION Early analyses have indicated that the DAGMC workflow is a promising toolkit for running vehicle geometries of interest to NASA through multiple radiation transport codes. In addition, recent work has shown that a realistic human phantom, provided via a subcontract with the University of Florida, can be placed inside any vehicle geometry for a combinatorial analysis. This added functionality gives the user the ability to score various parameters at the organ level, and the results can then be used as input for cancer risk models.
Barzilla, J. E.↗
A method for interactive specification of multiple-block topologies
A method is presented for dealing with the vast amount of topological and other data which must be specified to generate a multiple-block computational grid. Specific uses of the graphical capabilities of a powerful scientific workstation are described which reduce the burden on the user of collecting and formatting such large amounts of data. A program to implement this method, 3DPREP, is described. A plotting transformation algorithm, some useful software tools, notes on programming, and a database organization are also presented. Example grids developed using the method are shown.
Sorenson, Reese L.↗
Space Station Advanced Development Program
The Space Station Advanced Development Program has the objective to transform promising new techniques into mature proven concepts to enable design options for the initial Space Station. It is pointed out that the options should improve system performance and reduce operational costs. Attention is given to the approach employed in the implementation of the program, the technology issues, aspects of Space Station evolution and growth, a Space Station technology overview, and subsystem technologies. The Advanced Development Power Program is considered along with the advanced development of auxiliary propulsion, the program dealing with attitude control and stabilization, and developments related to data management. Other developments are concerned with communication, system operation, manned systems technology, structures, and environmental control and life support.
Carlisle, R. F.↗
Future Evolution of NASA's SLR and VLBI Networks
Over the first half of this decade the NASA Space Geodesy Program is planning a major transformation of its existing (Satellite Laser Ranging) SLR network of stations and also further evolutionary changes to its network of (Very Long Base Interferometry) VLBI stations. These network changes will be made to meet the ever more demanding requirements of the earth and space science programs that these networks support while seeking through automation and electronic data communications to increase efficiency and decrease cost of operations and maintenance. The major aspects of the NASA plan will be outlined and the benefits to the scientific community will be addressed.
Bosworth, John M.↗