Search NASA⌕ Search

SEARCH · Search NASA

Results for “Propulsion Noise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Flight Test Results for Uniquely Tailored Propulsion-Airframe Aeroacoustic Chevrons: Community Noise

The flow/acoustic environment around the jet exhaust of an engine when installed on an airplane, say, under the wing, is highly asymmetric due to the pylon, the wing and the high-lift devices. Recent scale model tests have shown that such Propulsion Airframe Aeroacoustic (PAA) interactions and the jet mixing noise can be reduced more than with conventional azimuthally uniform chevrons by uniquely tailoring the chevrons to produce enhanced mixing near the pylon. This paper describes the community noise results from a flight test on a large twin-engine airplane using this concept of azimuthally varying chevrons for engines installed under the wing. Results for two different nozzle configurations are described: azimuthally varying "PAA T-fan" chevrons on the fan nozzle with a baseline no-chevron core nozzle and a second with PAA T-fan chevrons with conventional azimuthally uniform chevrons on the core nozzle. We analyze these test results in comparison to the baseline no-chevron nozzle on both spectral and integrated power level bases. The study focuses on the peak jet noise reduction and the effects at high frequencies for typical take-off power settings. The noise reduction and the absolute noise levels are then compared to model scale results. The flight test results verify that the PAA T-fan nozzles in combination with standard core chevron nozzles can, indeed, give a reasonable amount of noise reduction at low frequencies without high-frequency lift during take-off conditions and hardly any impact on the cruise thrust coefficient.

Nesbitt, Eric↗
NASA NTRS1976

Correlation of internal surface turbulence with far-field noise of the augmentor wing propulsive-lift concept

A wind tunnel investigation was conducted to determine the nature, strength, and variation with airspeed of the acoustic sources of the augmentor wing propulsive-lift concept. The augmentor wing overall noise is dominated by the high frequency jet mixing noise characteristic of the lobed primary nozzle. The augmentor modifies the intensity and propagation characteristics of the jet sources, especially those that exist inside the augmentor. The interaction of the turbulent flow with the augmentor creates low-frequency, low-intensity surface noise and trailing edge noise. These sources dominate any jet mixing noise that is present at the low frequencies and could become significant if the jet noise was suppressed by treating the augmentor with a lining tuned to the jet noise source location. The far-field noise of the untreated augmentor is unaffected by airspeed; however, this may not be the case when the jet noise is suppressed, because the trailing edge surface pressure and correlations with far-field noise do show a reduction with forward speed.

Falarski, M. D.↗
NASA NTRS2019

Noise Reduction Potential of Phase Control for Distributed Propulsion Vehicles

Phase control is a noise reduction technique leveraging destructive interference of the coherent acoustic source field between a system of propellers rotating at equivalent rates. Carefully selecting the relative azimuthal blade positions (phase), the overall directivity of the blade passage frequency noise can be modified, potentially steering these tonal components away from sensitive areas. A modeling technique is described and validated using measurements of a dual-rotor system. The sensitivity of noise reduction through phase control is studied in a typical parameter space, i.e., dependence on rotation rate, number of propellers, spacing and layout, and rotation direction. Additionally, estimates of how realistic conditions, e.g., error in the phase controller, degrade potential benefits are described based on the generalized coherence of the system. From this, it is observed that the deviation from the nominal rotation rate should not exceed approximately 0.5% to achieve a 6 dB decrease at the blade passage frequency.

Kyle A Pascioni↗
NASA NTRS2016

Aircraft Noise Reduction Subproject Overview

The material presents highlights of propulsion and airframe noise research being completed for the Advanced Air Transport Technology Project. The basis of noise reduction plans along with representative work for the airframe, propulsion, and propulsion-airframe integration is discussed for the Aircraft Noise reduction Subproject.

noise reduction↗
NASA NTRS1972

Quiet STOL propulsion session introductory remarks

Research activities, preliminary design activities, and system optimization studies in support of the development of advanced, quiet, STOL propulsion systems are discussed. Noise alleviation by means of controlling the source and by means of acoustical treatment receive considerable emphasis. A STOL airplane designed for a given payload has essentially double the installed thrust of a comparable CTOL airplane. Unless compensated for during the design process, this alone will tend to increase the source noise by 3 db. The propulsive lift introduces flap impingement noise or duct and flap scrubbing noise, noise sources not present in CTOL airplanes to any significant degree. These additional noise sources are illustrated. Depending on the specific configuration, this will tend to increase the noise by several db or more. Although the propulsive lift characteristics of STOL airplanes will tend to increase source noise significantly, the proximity of STOL airfields to populated areas leads to STOL noise objectives considerably lower than those currently applicable to CTOL airplanes.

Schroeder, R. W.↗
NASA NTRS2022

Impact of Future Low-Emissions Combustor Technology on Acoustic Scaling Laws

A first-of-its-kind examination of broadband noise associated with a far-term advanced low-emission aero-combustor concept is presented. Due to design trends and expected cycle changes for future aircraft propulsion systems, noise generated by sources in the combustor are expected to become of increasing significance for airport-community noise. The paper assesses the impact on legacy semi-empirical noise-prediction methods from the expected radical departures from current combustor operating conditions and designs, such as fuel-air distribution and flame anchoring techniques. Such methods are essential in system-level noise assessments at the preliminary design stage for advanced air transports to assure that overall environmental goals are met. Detailed unsteady pressure measurements, obtained in a fundamental combustion noise experiment utilizing a combustor rig at relevant pressures and temperatures, are analyzed. In addition to an advanced far-term low-emissions concept, a reference configuration with the test section arranged to model a modern combustor sector was also studied. For the test rig in the current-generation configuration, the measured broadband acoustic data are reasonably well described by the acoustic-power scaling laws used in legacy semi-empirical noise-prediction methods. For the future-advanced configuration, the legacy scaling laws, with some notable exceptions, provide correct trends, but with much less accuracy

aeroacoustics↗
NASA NTRS2016

Perceived Annoyance to Noise Produced by a Distributed Electric Propulsion High Lift System

Results of a psychoacoustic test performed to understand the relative annoyance to noise produced by several configurations of a distributed electric propulsion high lift system are given. It is found that the number of propellers in the system is a major factor in annoyance perception. This is an intuitive result as annoyance increases, in general, with frequency, and, the blade passage frequency of the propellers increases with the number of propellers. Additionally, the data indicate that having some variation in the blade passage frequency from propeller-to-propeller is beneficial as it reduces the high tonality generated when all the propellers are spinning in synchrony at the same speed. The propellers can be set to spin at different speeds, but it was found that allowing the motor controllers to drift within 1% of nominal settings produced the best results (lowest overall annoyance). The methodology employed has been demonstrated to be effective in providing timely feedback to designers in the early stages of design development.

Palumbo, Dan↗
NASA NTRS2003

Very Large Eddy Simulation Technique for Noise Prediction and Control in Turbomachinery and Propulsion

The summer fellowship research project focused on further developing an advanced computational technique based on Very Large Eddy Simulation (VLES) for analysis and control of major sources of noise in turbomachinery and propulsion systems, including jet noise and fan noise. Major part of the work during the 10-week tenure dealt with implementing a low-order, implicit A-stable time-stepping scheme in the existing explicit VLES code of Dr. Ray Hixon. The preliminary plan of the work also included application of a new time marching formulation to the problem of viscous gust-airfoil interaction. Other research items selected for implementation (possibly in the future) included investigating a set of new subgrid turbulent models for the code, and code application to a number of test cases, including a supersonic jet and swirling flow downstream of a rotor stage.

Golubev, Vladimir V.↗
NASA NTRS2017

Jet-Surface Interaction Noise from High-Aspect Ratio Nozzles: Test Summary

Noise and flow data have been acquired for a 16:1 aspect ratio rectangular nozzle exhausting near a simple surface at the NASA Glenn Research Center as part of an ongoing effort to understand, model, and predict the noise produced by current and future concept aircraft employing a tightly integrated engine airframe designs. The particular concept under consideration in this experiment is a blended-wing-body airframe powered by a series of electric fans exhausting through slot nozzle over an aft deck. The exhaust Mach number and surface length were parametrically varied during the test. Far-field noise data were acquired for all nozzle surface geometries and exhaust flow conditions. Phased-array noise source localization data and in-flow pressure data were also acquired for a subset of the isolated (no surface) and surface configurations; these measurements provide data that have proven useful for modeling the jet-surface interaction noise source and the surface effect on the jet-mixing noise in round jets. A summary of the nozzle surface geometry, flow conditions tested, and data collected are presented.

Propulsion Noise↗
NASA NTRS1992

Combustion noise and combustion instabilities in propulsion systems

This paper is concerned with some aspects of non-linear behavior of unsteady motions in combustion chambers. The emphasis is on conditions under which organized oscillations having discrete frequencies may exist in the presence of random motions. In order to treat the two types of motions together, and particularly to investigate coupling between noise and combustion instabilities, the unsteady field is represented as a synthesis of acoustic modes having time-varying amplitudes. Each of the amplitudes are written as the sum of two parts, one associated with the random field and the remainder representing the organized oscillations. After spatial averaging, the general problem is reduced to solution of a set of second-order ordinary differential equations whose structure depends on the sorts of nonlinear processes accounted for. This formulation accommodates any physical process; in particular, terms are included to represent noise sources, although only limited modeling is discussed. Our results suggest that random sources of noise have only small effects on combustion instabilities and seem not to be a cause of unstable motions. However, the coupling between the two sorts of unsteady motions may be important as an essential process in a proposed scheme for noise control. It is now a familiar observation that many nonlinear deterministic systems are capable of exhibiting apparently random motions called 'chaos.' This is a particularly interesting possibility for systems which also executed non-deterministic random motions. In combustion chambers, a nonlinear deterministic system (acoustical motions) exists in the presence of noise produced by flow separation, turbulent motions, and energy released by combustion processes. The last part of the paper is directed to the matter of discovering whether or not chaotic motions exist in combustion systems. Analysis has not progressed sufficiently far to answer the question. We report here recent results of processing data taken in one combustor to determine the dimensions of any attractors in the motions. No evidence has been found for chaos in the strict sense, but the method seems to be an important means of investigating the nonlinear behavior of combustion systems.

F. E. C. Culick↗
NASA NTRS1972

NASA aircraft engine noise research.

NASA research and development work on the noise of aircraft engines suitable for use on conventional take-off and landing subsonic cruise airplanes is reviewed. The work discussed was part of the NASA Quiet Engine program. Salient results in the areas of fan, jet and complete propulsion system noise are presented and briefly discussed.

Kramer, J. J.↗
NASA NTRSDate not supplied

Propulsion Airframe Aeroacoustics and Aircraft System Noise Flight Research Test: NASA Overview

Motivations and the formulation of the objectives are described for an ambitious flight research test conducted in collaboration between NASA and The Boeing Company. The Propulsion Airframe Aeroacoustics and Aircraft System Noise Flight Research Test was executed by the Boeing ecoDemonstrator Program with an Etihad Airways Boeing 787-10 aircraft. Five key technical approaches are described that were used to accomplish the more unconventional and challenging objectives of the research. In addition to the modern technology of the 787, these include evaluating multiple acoustic shielding and reflection effects using both the wing and fuselage in straight flight and banking flight paths, hardwalling the aft duct liner, and utilizing an extensive instrumentation array both on the ground and on the aircraft. The research level version of NASA’s aircraft system noise prediction capability including a new acoustic scattering method were used to confirm the technical approaches and provide guidance for the detailed design of instrumentation and flight test plans. Initial comparisons are shown of flight test data to predictions using the research level of NASA’s Aircraft Noise Prediction Program. Significant prediction challenges are revealed when compared to these high-quality data, while major progress is shown both in the measurement and the prediction of propulsion airframe aeroacoustic effects in flight. This comparison marks the first rigorous validation with modern flight test data and establishes a basis to further understand and quantify the state of NASA’s current capability and to develop improvements in the fidelity of aircraft system noise predictions. The context of multiple coordinated companion research papers is described as well as future plans for the continued analysis of this flight research data.

Propulsion Airframe Aeroacoustics↗
NASA NTRS2018

Jet-Surface Interaction Noise Models Comparison to TMP17 and Next Steps

A set of empirical jet-surface interaction noise models, developed for single-stream round nozzles exhausting over a simple surface in a static ambient, are evaluated for use in more realistic applications that include multi-stream nozzle systems with chevrons and dihedral surface geometries. The simple-single-stream models have several advantages when used in system-level noise studies: they are robust, they are quickly computed, and they are generally applicable to a wide range of configurations. However, these models rely on a fixed noise source distribution that does not account for the presence of chevrons at the nozzle exit. The effect of this omission on the prediction accuracy is shown by this comparison to experimental data. This motivates discussion of future work to develop a more robust modeling framework that can account for generalized source distributions and more complex airframe geometries. Re: Top-Mounted Propulsion (TMP17) Test Plans.

Propulsion Noise↗