Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pyrite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Climate forcing controls on carbon terrestrial fluxes during shale weathering

Climate influences near-surface biogeochemical processes and thereby determines the partitioning of carbon dioxide (CO 2 ) in shale, and yet the controls on carbon (C) weathering fluxes remain poorly constrained. Using a dataset that characterizes biogeochemical responses to climate forcing in shale regolith, we implement a numerical model that describes the effects of water infiltration events, gas exchange, and temperature fluctuations on soil respiration and mineral weathering at a seasonal timescale. Our modeling approach allows us to quantitatively disentangle the controls of transient climate forcing and biogeochemical mechanisms on C partitioning. We find that ~3% of soil CO 2 (1.02 mol C/m 2 /y) is exported to the subsurface during large infiltration events. Here, net atmospheric CO 2 drawdown primarily occurs during spring snowmelt, governs the aqueous C exports (61%), and exceeds the CO 2 flux generated by pyrite and petrogenic organic matter oxidation (~0.2 mol C/m 2 /y). We show that shale CO 2 consumption results from the temporal coupling between soil microbial respiration and carbonate weathering. This coupling is driven by the impacts of hydrologic fluctuations on fresh organic matter availability and CO 2 transport to the weathering front. Diffusion-limited transport of gases under transient hydrological conditions exerts an important control on CO 2 (g) egress patterns and thus must be considered when inferring soil CO 2 drawdown from the gas phase composition. Our findings emphasize the importance of seasonal climate forcing in shaping the net contribution of shale weathering to terrestrial C fluxes and suggest that warmer conditions could reduce the potential for shale weathering to act as a CO 2 sink.

58 GEOSCIENCES↗
DOE OSTI2023

Microwave-assisted synthesis of iron sulfide motifs for electrochemical applications

Abstract The syntheses of FeS 2 and Fe 3 S 4 nanomaterials were optimized using a novel facile, surfactant-free, and microwave-assisted, one-pot synthesis method, run under ambient and reasonably mild reaction conditions. Synthetic parameters, such as metal precursor salt identity, reaction time, reaction temperature, metal:sulfur molar ratios, and solvent combinations, were all systematically investigated and optimized. A series of FeS 2 (pyrite) samples was initially fabricated using thioacetamide (TAA) as the sulfur precursor to generate a distinctive, uniform octahedra-based morphology. Switching the sulfur precursor from TAA to L-cysteine resulted in a corresponding transformation in not only chemical composition from FeS 2 to an iron thiospinel structure, Fe 3 S 4 (otherwise known as greigite), but also an associated morphological evolution from octahedra to nanosheet aggregates. The study of these materials has enabled crucial insights into the formation mechanisms of these materials under a relatively non-conventional microwave-assisted setting. Furthermore, in separate experiments, multi-walled carbon nanotubes (MWNTs) and graphene were added in with underlying metal sulfide species to create conductive Fe–S/MWNT composites and Fe–S/graphene composites, respectively. The method of addition of either MWNTs or graphene was also explored, wherein an ‘ ex-situ ’ synthetic procedure was found to be the least disruptive means of attachment and immobilization onto iron sulfide co-reagents as a means of preserving the latter’s inherent composition and morphology. The redox acidity for the parent material and associated composites demonstrates the utility of our as-developed synthetic methods for creating motifs relevant for electrochemical applications, such as energy storage.

25 ENERGY STORAGE↗
DOE OSTI2021

Global Sensitivity Analysis of a Reactive Transport Model for Mineral Scale Formation During Hydraulic Fracturing

Injection of water-based hydraulic fracturing fluid (HFF) into tight shale gas/oil formations can increase formation permeability and enhance production rates, but this process frequently causes mineral scale formation that can occlude pore space and hinder flow. To identify the most important factors that control the formation of mineral scales, we applied a novel global sensitivity analysis method—distance-based generalized sensitivity analysis (DGSA)—to a reactive transport model (RTM) that was previously built and calibrated to simulate precipitation of barite [BaSO4] and iron (hydr)oxide [Fe(OH) 3 ] in shale matrices and on fracture surfaces. Reactive transport simulations were run with model parameters randomly sampled based on assigned uncertainties. Modeling results for barite and Fe(OH)3 formation were clustered using machine-learning algorithms. A list of ranked critical input parameters was obtained after statistical quantification of cumulative distribution functions of input parameters. We found that barite formation is most sensitive to the rate of sulfate ion generation, which is determined by the pyrite dissolution rate coefficient and oxidant availability. In addition, barite formation is sensitive to the initial amounts of barite in HFF and shale, followed by barite thermodynamics/kinetics. For Fe(OH) 3 formation, the ranked factors are Fe(OH)3 precipitation rate coefficients, initial HFF pH, initial Fe(OH) 3 amount in HFF, and oxidant availability. Overall, our results provide insights into managing mineral scale formation during hydraulic fracturing to enhance production. Meanwhile, this study serves as an example of global sensitivity analysis of RTMs using the efficient, straightforward, and open-source DGSA method.

58 GEOSCIENCES↗
DOE OSTI2020

Evidence for oxygenation of Fe-Mg oxides at mid-mantle conditions and the rise of deep oxygen

Abstract As the reaction product of subducted water and the iron core, FeO2 with more oxygen than hematite (Fe2O3) has been recently recognized as an important component in the D” layer just above the Earth's core-mantle boundary. Here, we report a new oxygen-excess phase (Mg, Fe)2O3+δ (0 < δ < 1, denoted as ‘OE-phase’). It forms at pressures greater than 40 gigapascal when (Mg, Fe)-bearing hydrous materials are heated over 1500 kelvin. The OE-phase is fully recoverable to ambient conditions for ex situ investigation using transmission electron microscopy, which indicates that the OE-phase contains ferric iron (Fe3+) as in Fe2O3 but holds excess oxygen through interactions between oxygen atoms. The new OE-phase provides strong evidence that H2O has extraordinary oxidation power at high pressure. Unlike the formation of pyrite-type FeO2Hx which usually requires saturated water, the OE-phase can be formed with under-saturated water at mid-mantle conditions, and is expected to be more ubiquitous at depths greater than 1000 km in the Earth's mantle. The emergence of oxygen-excess reservoirs out of primordial or subducted (Mg, Fe)-bearing hydrous materials may revise our view on the deep-mantle redox chemistry.

58 GEOSCIENCES↗
DOE OSTI2020

Mineralogy of the deep lower mantle in the presence of H 2 O

Understanding the mineralogy of the Earth's interior is a prerequisite for unravelling the evolution and dynamics of our planet. Here, we conducted high pressure-temperature experiments mimicking the conditions of the deep lower mantle (DLM, 1800–2890 km in depth) and observed surprising mineralogical transformations in the presence of water. Ferropericlase, (Mg, Fe)O, which is the most abundant oxide mineral in Earth, reacts with H 2 O to form a previously unknown (Mg, Fe)O 2 H x (x ≤ 1) phase. The (Mg, Fe)O 2 H x has a pyrite structure and it coexists with the dominant silicate phases, bridgmanite and post-perovskite. Depending on Mg content and geotherm temperatures, the transformation may occur at 1800 km for (Mg 0.6 Fe 0.4 )O or beyond 2300 km for (Mg 0.7 Fe 0.3 )O. The (Mg, Fe)O 2 H x is an oxygen excess phase that stores an excessive amount of oxygen beyond the charge balance of maximum cation valences (Mg 2+ , Fe 3+ and H + ). This important phase has a number of far-reaching implications including extreme redox inhomogeneity, deep-oxygen reservoirs in the DLM and an internal source for modulating oxygen in the atmosphere.

58 GEOSCIENCES↗
DOE OSTI2021

Ferromagnetism in a Semiconductor with Mobile Carriers via Low-Level Nonmagnetic Doping

We show that doped cubic iron pyrite, which is a diamagnetic semiconductor, becomes ferromagnetic when p-type doped. We furthermore find that this material can exhibit high spin polarization both for tunneling and transport devices. These results are based on first-principles electronic structure and transport calculations. This illustrates the use of p-type doping without magnetic impurities as a strategy for obtaining ferromagnetic semiconducting behavior, with implications for spintronic applications that require both magnetic ordering and good mobility. This is a combination that has been difficult to achieve by doping semiconductors with magnetic impurities. We show that phosphorus and arsenic may be effective dopants for achieving this behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Republished: Colossal density-driven resistance response in the negative charge transfer insulator MnS 2

The Mn chalcogenides show a remarkable variation in structural and physical properties with density. In MnS 2 we observe a pronounced difference with the effects of varying hydrostaticity with pressure inducing a structural transition at 300 K. Within the pyrite phase, a colossal electrical resistance drop of 10 8 Ohms is observed by 12 GPa of nonhydrostatic compression at 300 K. DFT simulations reveal the metallization to be unexpectedly driven by previously unoccupied S$^{2-}_2$ σ$^*_{3p}$ antibonding states crossing the Fermi level. This is a seldom seen variant of the charge transfer insulator to metal transition for negative charge transfer insulators which have anions with an unsaturated valence. Finally, by 36 GPa of nonhydrostatic compression, the single presence of the low-spin insulating arsenopyrite (P2 1 /c) phase is confirmed, and the bulk metallicity is broken with the system returning to an insulative electronic state.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reexamination of 2.5-Ga “whiff” of oxygen interval points to anoxic ocean before GOE

Transient appearances of oxygen have been inferred before the Great Oxygenation Event (GOE) [~2.3 billion years (Ga) ago] based on redox-sensitive elements such as Mo and S—most prominently from the ~2.5-Ga Mount McRae Shale in Western Australia. We present new spatially resolved data including synchrotron-based x-ray spectroscopy and secondary ion mass spectrometry to characterize the petrogenesis of the Mount McRae Shale. Sediments were primarily composed of organic matter and volcanic ash (a potential source of Mo), with U-Pb ages revealing extremely low sedimentation rates. Catagenesis created bedding-parallel microfractures, which subsequently acted as fluid pathways for metasomatic alteration and recent oxidative weathering. Our collective observations suggest that the bulk chemical datasets pointing toward a “whiff” of oxygen developed during postdepositional events. Nonzero Δ 33 S in trace-metal–poor, early diagenetic pyrite and the unusually enriched organic carbon at low sedimentation rates instead suggest that environmental oxygen levels were negligible ~150 million years before the GOE.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Impact of mineral and non-mineral sources of iron and sulfur on the metalloproteome of Methanosarcina barkeri

Methanogens often inhabit sulfidic environments that favor the precipitation of transition metals such as iron (Fe) as metal sulfides, including mackinawite (FeS) and pyrite (FeS 2 ). These metal sulfides have historically been considered biologically unavailable. Nonetheless, methanogens are commonly cultivated with sulfide (HS - ) as a sulfur source, a condition that would be expected to favor metal precipitation and thus limit metal availability. Recent studies have shown that methanogens can access Fe and sulfur (S) from FeS and FeS 2 to sustain growth. As such, medium supplied with FeS 2 should lead to higher availability of transition metals when compared to medium supplied with HS - . Here, we examined how transition metal availability under sulfidic (i.e., cells provided with HS - as sole S source) versus non-sulfidic (cells provided with FeS 2 as sole S source) conditions impact the metalloproteome of Methanosarcina barkeri Fusaro. To achieve this, we employed size exclusion chromatography coupled with inductively coupled plasma mass spectrometry and shotgun proteomics. Significant changes were observed in the composition and abundance of iron, cobalt, nickel, zinc, and molybdenum proteins. Among the differences were alterations in the stoichiometry and abundance of multisubunit protein complexes involved in methanogenesis and electron transport chains. Furthermore, our data suggest that M. barkeri utilizes the minimal iron-sulfur cluster complex and canonical cysteine biosynthesis proteins when grown on FeS 2 but uses the canonical Suf pathway in conjunction with the tRNA-Sep cysteine pathway for iron-sulfur cluster and cysteine biosynthesis under sulfidic growth conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

A shift between mineral and nonmineral sources of iron and sulfur causes proteome-wide changes in Methanosarcina barkeri

ABSTRACT Iron (Fe) and sulfur (S) are required elements for life, and changes in their availability can limit the ecological distribution and function of microorganisms. In anoxic environments, soluble Fe typically exists as ferrous iron [Fe(II)] and S as sulfide (HS − ). These species exhibit a strong affinity that ultimately drives the formation of sedimentary pyrite (FeS 2 ). Recently, paradigm-shifting studies indicate that Fe and S in FeS 2 can be made bioavailable by methanogens through a reductive dissolution process. However, the impact of the utilization of FeS 2 , as opposed to canonical Fe and S sources, on the phenotype of cells is not fully understood. Here, shotgun proteomics was utilized to measure changes in the phenotype of Methanosarcina barkeri MS grown with FeS 2 , Fe(II)/HS − , or Fe(II)/cysteine. Shotgun proteomics tracked 1,019 proteins overall, with 307 observed to change between growth conditions. Functional characterization and pathway analyses revealed these changes to be systemic and largely tangential to Fe/S metabolism. As a final step, the proteomics data were viewed with respect to previously collected transcriptomics data to deepen the analysis. Presented here is evidence that M. barkeri adopts distinct phenotypes to exploit specific sources of Fe and S in its environment. This is supported by observed protein abundance changes across broad categories of cellular biology. DNA adjacent metabolism, central carbon metabolism methanogenesis, metal trafficking, quorum sensing, and porphyrin biosynthesis pathways are all features in the phenotypic differentiation. Differences in trace metal availability attributed to complexation with HS − , either as a component of the growth medium [Fe(II)/HS − ] or generated through reduction of FeS 2 , were likely a major factor underpinning these phenotypic differences. IMPORTANCE The methanogenic archaeon Methanosarcina barkeri holds great potential for industrial bio-mining and energy generation technologies. Much of the biochemistry of this microbe is poorly understood, and its characterization will provide a glimpse into biological processes that evolved close to life’s origin. The discovery of its ability to extract iron and sulfur from bulk, solid-phase minerals shifted a longstanding paradigm that these elements were inaccessible to biological systems. The full elucidation of this process has the potential to help scientists and engineers extract valuable metals from low-grade ore and mine waste generating energy in the form of methane while doing so.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Cobalt mineralogy at the Iron Creek deposit, Idaho cobalt belt, USA: Implications for domestic critical mineral production

Current U.S. policies aim to establish domestic supply chains of critical minerals for the energy transition. The Iron Creek deposit in the Idaho cobalt belt (ICB) is one of the most promising cobalt (Co) targets. Our case study illustrates the importance of mineralogy in strategic evaluations of critical mineral potential. Most of the Co at Iron Creek occurs as Fe substitution in pyrite, with lattice-bound and inclusion-hosted Ag, As, Bi, Ni, Pb, Se, Te ± trace Au and Sb. Cobalt also occurs in minor cattierite-vaesite. The Co minerals are intergrown with Co-poor chalcopyrite hosting Cu ± minor In and Zn. Worldwide, most Co is recovered from deposits mineralogically distinct from the ICB, and the United States currently lacks infrastructure to recover this Co and its associated metals. ICB ore minerals could be processed by autoclave, roaster, smelter, bioleach, or heap leach. Recovery of the Ag, As, Au, Bi, In, Pb, Se, Te, and Zn would be costly by autoclave, and construction of a custom smelter for ICB ores is likely uneconomic, so these elements would become waste irrespective of criticality. The Co-Fe and Co-As sulfide minerals are most suitable for Co and Ni recovery by a hydrometallurgical autoclave process, with potential pretreatment of cobaltiferous pyrite/arsenopyrite in an inert-atmosphere roaster, in new domestic or anticipated international facilities. The ICB is the second largest known Co resource in the United States. Consideration of ore mineralogy in the ICB is essential in strategies for domestic production.

58 GEOSCIENCES↗
DOE OSTI2021

Characterization of Nanoscale Pores in Tight Gas Sandstones Using Complex Techniques: A Case Study of a Linxing Tight Gas Sandstone Reservoir

Pore structures with rich nanopores and permeability in tight gas reservoirs are poorly understood up to date. Advanced techniques are needed to be employed to accurately characterize pore structures, especially tiny pores which include micron and nanopores. In this study, various experimental techniques such as scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) T 2 , nitrogen adsorption method, and NMR cryoporometry (NMRC) are combined to interrogate the complex pore systems of the tight gas reservoir in the Linxing formation, Ordos Basin, China. Results show that tight gas sandstones are primarily comprised of residual interparticle and clay-dominated pores. Clay and quartz are two dominate minerals while pyrite occupies a nontrivial amount as well. The permeability of tight gas sandstones is very low, exhibiting an extremely poor positive correlation with porosity. While pore types and relative pore contents are more influential factors on the permeability, accurate characterization of pore size distribution is critical for the permeability of tight gas sandstones. Therefore, complementary characterization methods are carried out, indicating that neither small pores with radii < 100 nm (around peak 1 in NMR T 2 distribution) nor large pores with radii > 5 μ m (around peak 3 in NMR T 2 distribution) control the permeability by analyzing the connectivity of the pores in various size ranges, but rather pores averaging approximately 350 ± X nm (around peak 2 in NMR T 2 distribution) have sufficient connectivity to host and transmit hydrocarbons. The pore size of tight gas sandstones is dominated by the clay-rich mineral assemblage. The study shows that the NMRC technique can be a very promising method, especially when referred to as a promising “roadmap” on how to interrogate tight formations such as the tight gas sands or even shale especially for the nanopore characterization.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

Identifying microbial functional guilds performing cryptic organotrophic and lithotrophic redox cycles in anaerobic granular biofilms

Granular biofilms used in anaerobic digester systems contain diverse microbial populations that interact to hydrolyze organic matter and produce methane within controlled environments. Prior research investigated the feasibility of utilizing granular biofilms obtained from an anaerobic digester to remove nitrate without the addition of exogenous electron donors. These granules possessed a unique structure of alternating light and dark iron sulfide and pyrite rich layers that potentially served as both an electron source and sink, linking carbon, nitrogen, sulfur, and iron cycles. To characterize the functional roles of diverse microbial populations enriched within these layered biofilms, we analyzed metagenomes obtained from three different granules. Comparisons between the functional gene content of forty metagenome assembled genomes (MAGs) identified phylogenetically cohesive functional guilds. Each of these functional MAG clusters was assigned to specific steps in anaerobic digestion (hydrolysis, acidogenesis, acetogenesis, and methanogenesis) and anaerobic respiration (denitrification and sulfate reduction). Comparisons with metagenomes derived from a variety of natural and engineered ecosystems confirmed that the enriched denitrifying bacteria were similar to populations typically found in wetlands and biological nitrogen removal systems. Analysis of read alignments to individual genes within the forty MAGs identified conserved genomic features that were representative of the functions that distinguished functional guilds. Overall, this research illustrates the utility of functional based classification of microorganisms for characterizing ecosystem functions and highlights the potential application of engineered ecosystems to serve as experimental models for complex natural ecosystems.

Ecosystem engineering↗
DOE OSTI2021

Core-flood Effluent and Shale Surface Chemistries in Predicting Interaction between Shale, Brine, and Reactive Fluid

We report field and laboratory observations to date indicate that the efficiency of hydraulic fracturing, as it relates to hydrocarbon recovery, depends significantly on geochemical alterations to rock surfaces that diminish accessibility by partial or total plugging of the pore and fracture networks. This is caused by mineral scale deposition such as coating of fracture surfaces with precipitates, particle migration, and/or crack closure due to dissolution under stress. In reactive flow-through experiments, mineral reactions in response to acidic fluid injection significantly reduced system porosity and core permeability. The present study focuses on changes to fluid chemistry and shale surfaces (inlet and fracture walls) resulting from shale-fluid interactions and integrating these findings for an improved estimate of transport-related consequences. The reacted shale surfaces were examined by spatially-resolved scanning electron microscopy - energy dispersive spectroscopy (SEM-EDS) analysis. Importantly, inductively coupled plasma - mass spectrometry/optical emission spectroscopy (ICP-MS/OES) was utilized to probe the chemical evolution of the core-flood effluents. The three study cores selected from the Marcellus formation represent different mineralogies and structural features. In flow-through experiments, lab-generated brine and HCl-based fracture fluid (pH=2) were injected sequentially under effective stress (up to 500 psi) at reservoir temperature (80°C). SEM-EDS results confirmed by the ICP concentration trends showed significant Fe hydroxide precipitates in clay- and pyrite-rich outcrop samples due to partial oxidation of Fe-bearing phases in the case of intrusion of low salinity water-based fluids. Porosity reduction in the MSEEL (Marcellus Shale Energy and Environmental Laboratory) carbonate-rich sample is related to compaction of cores under stress due to matrix softening with substantial dissolution, and pore-filling by hydroxides, as well as barite and salts. Despite the same fluid compositions and experimental conditions used for both MSEEL samples, barite precipitation was much more intense in the MSEEL clay-rich sample due to its greater sorption capacity and additional sulfate source as well as fissile nature with multiple lengthwise cracks. ICP tests revealed time-resolved concentration trends in produced brine and reactive fluids that in turn complemented the pre-/post-reaction SEM-EDS observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Materials Data on FeS2 by Materials Project

FeS2 is Pyrite structured and crystallizes in the cubic Pa-3 space group. The structure is three-dimensional. Fe3+ is bonded to six equivalent S+1.50- atoms to form corner-sharing FeS6 octahedra. The corner-sharing octahedral tilt angles are 64°. All Fe–S bond lengths are 2.25 Å. S+1.50- is bonded in a 3-coordinate geometry to three equivalent Fe3+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on CuS2 by Materials Project

CuS2 is Pyrite-like structured and crystallizes in the cubic Pa-3 space group. The structure is three-dimensional. Cu3+ is bonded to six equivalent S+1.50- atoms to form CuS6 octahedra that share corners with twelve equivalent CuS6 octahedra and corners with six equivalent SCu3S tetrahedra. The corner-sharing octahedral tilt angles are 67°. All Cu–S bond lengths are 2.46 Å. S+1.50- is bonded to three equivalent Cu3+ and one S+1.50- atom to form distorted SCu3S tetrahedra that share corners with three equivalent CuS6 octahedra and corners with fifteen equivalent SCu3S tetrahedra. The corner-sharing octahedral tilt angles are 74°. The S–S bond length is 2.03 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on ThC2 by Materials Project

ThC2 is Pyrite structured and crystallizes in the cubic Pa-3 space group. The structure is three-dimensional. Th4+ is bonded to six equivalent C2- atoms to form ThC6 octahedra that share corners with twelve equivalent ThC6 octahedra and corners with six equivalent CTh3C tetrahedra. The corner-sharing octahedral tilt angles are 74°. All Th–C bond lengths are 2.57 Å. C2- is bonded to three equivalent Th4+ and one C2- atom to form CTh3C tetrahedra that share corners with three equivalent ThC6 octahedra and corners with fifteen equivalent CTh3C tetrahedra. The corner-sharing octahedral tilt angles are 67°. The C–C bond length is 1.35 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Te2Ir by Materials Project

IrTe2 is Pyrite-like structured and crystallizes in the cubic Pa-3 space group. The structure is three-dimensional. Ir4+ is bonded to six equivalent Te2- atoms to form corner-sharing IrTe6 octahedra. The corner-sharing octahedral tilt angles are 62°. All Ir–Te bond lengths are 2.70 Å. Te2- is bonded in a 4-coordinate geometry to three equivalent Ir4+ and one Te2- atom. The Te–Te bond length is 3.01 Å.

36 MATERIALS SCIENCE↗