Search NASA⌕ Search

SEARCH · Search NASA

Results for “RANS modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Model-Invariant Hybrid RANS-LES Computations on Unstructured Meshes

Hybrid RANS-LES computations combine the bene ts of RANS and LES so that LES is used in regions where the accuracy of RANS deteriorates. The numerous hybrid approaches are limited by the speci cation of the LES-RANS interface, which can cause nonphysical results such as log-layer mismatch and low shear stress. The hybrid RANS-LES approach based on the concept of model invariance, mitigates these problems, enabling seamless blending of the RANS and LES regions while forming the basis for interpreting the results in the interface region. This hybrid formulation was implemented in the NASA FUN3D unstructured code and computations for ow in a channel at Reynolds number of 3300 (based on the channel half width h and the bulk in ow velocity u(infinity) were carried out. An isotropic stochastic turbulence generator was implemented to generate in ow turbulence. The present approach was able to eliminate the log-layer mismatch and predict the shear stress fairly well. Thus, the model-invariant hybrid formulation coupled with the isotropic turbulence in ow generation serves as a physically meaningful way of performing hybrid RANS-LES computations.

Sreekanth, R.↗
DOE OSTI2026

Validation of OpenPronghorn for Periodic Hill Flow Separation

OpenPronghorn is an open-source, MOOSE-based thermal-hydraulics simulation tool used for advanced reactor analysis. As an open-source code, it offers a transparent framework for validating governing equations, assumptions, and numerical methods against established benchmarks. This study evaluates OpenPronghorn's RANS turbulence model against the ERCOFTAC Case 81 periodic hill benchmark, a standard test case for separated turbulent flow featuring curved-wall separation, recirculation, shear-layer development, and reattachment. Streamwise velocity profiles predicted by OpenPronghorn were compared to reference LES data at multiple x/h locations. Results show that OpenPronghorn captures the overall trend of the velocity profiles, but the largest discrepancies occur in the separated-flow region, where turbulence is highly anisotropic and strongly affected by adverse pressure gradients and wall curvature—conditions that are inherently difficult for standard RANS models to resolve. Future work will test alternative k-e model variants and correction terms to improve prediction accuracy in this region.

42 - ENGINEERING↗
DOE OSTI2024

Data-driven closure modeling for hypersonic turbulent flows

The Reynolds-averaged Navier–Stokes (RANS) equations remain a workhorse technology for simulating compressible fluid flows of practical interest. Due to model-form errors, however, RANS models can yield erroneous predictions that preclude their use on mission-critical problems. This report summarizes work performed from FY22-FY24 focused on improving RANS models for hypersonic flows using data-driven modeling and scientific machine learning. In this work we: 1. Investigate the current capabilities of RANS models in Sandia’s parallel aerodynamics and re-entry code (SPARC) for hypersonic flows with a focus on shock boundary layer interactions (SBLIs), 2. Assess several established corrections that exist in the literature aimed at improving predictions for SBLIs, 3. Develop improved models for the Reynolds stress tensor using tensor-basis neural networks, 4. Develop a neural-network-based variable turbulent Prandtl number model to reduce errors in wall heating in SBLIs. 5. Begin future investigations including employing the LIFE framework to improve wall heating predictions in SBLIs as well as the ensemble Kalman filter. We find that current RANS models in SPARC are deficient for complex SBLI flows. In particular, no current model jointly predicts wall heat flux, wall shear stress, and wall pressure with reasonable accuracy. Existing corrections help, but do not alleviate this issue altogether. The development of improved models for the Reynolds stress tensor via tensor-basis neural networks results in more predictive RANS models across a suite of low-speed and high-speed cases. For hypersonic boundary layers, the inclusion of the wall-normal Reynolds stress via TBNNs has an appreciable impact on the wall-normal momentum balance and wall quantities. However, we find that improvements to the Reynolds stress tensor do not address the over-prediction in wall heat flux in SBLIs. We find that a neural-network-based variable turbulent Prandtl number model systematically and substantially improves wall heating predictions for a range of SBLI cases.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Modeling of Cube Array Roughness: RANS, Large Eddy Simulation, and Direct Numerical Simulation

Abstract Flow over arrays of cubes is an extensively studied model problem for rough wall turbulent boundary layers. While considerable research has been performed in computationally investigating these topologies using direct numerical simulation (DNS) and large eddy simulation (LES), the ability of sublayer-resolved Reynolds-averaged Navier–Stokes (RANS) to predict the bulk flow phenomena of these systems is relatively unexplored, especially at low and high packing densities. Here, RANS simulations are conducted on six different packing densities of cubes in aligned and staggered configurations. The packing densities investigated span from what would classically be defined as isolated, up to those in the d-type roughness regime, filling in the gap in the present literature. Three different sublayer-resolved turbulence closure models were tested for each case: a low Reynolds number k–ϵ model, the Menter k–ω SST model, and a full Reynolds stress model. Comparisons of the velocity fields, secondary flow features, and drag coefficients are made between the RANS results and existing LES and DNS results. There is a significant degree of variability in the performance of the various RANS models across all comparison metrics. However, the Reynolds stress model demonstrated the best accuracy in terms of the mean velocity profile as well as drag partition across the range of packing densities.

Engineering↗
DOE OSTI2021

Large Eddy Simulation of Lean Mixed-Mode Combustion Assisted by Partial Fuel Stratification in a Spark-Ignition Engine

Partial fuel stratification (PFS) is a promising fuel injection strategy to improve the stability of lean combustion by applying a small amount of pilot injection right before spark timing. Mixed-mode combustion, which makes use of end-gas autoignition following conventional deflagration-based combustion, can be further utilized to speed up the overall combustion. In this study, PFS-assisted mixed-mode combustion in a lean-burn direct injection spark-ignition (DISI) engine is numerically investigated using multi-cycle large eddy simulation (LES). A previously developed hybrid G-equation/well-stirred reactor combustion model for the well-mixed operation is extended to the PFS-assisted operation. The experimental spray morphology is employed to derive spray model parameters for the pilot injection. The LES-based model is validated against experimental data and is further compared with the Reynolds-averaged Navier–Stokes (RANS)-based model. Overall, both RANS and LES predict the mean pressure and heat release rate traces well, while LES outperforms RANS in capturing the cycle-to-cycle variation (CCV) and the combustion phasing in the mass burned space. Liquid and vapor penetrations obtained from the simulations agree reasonably well with the experiment. Detailed flame structures predicted from the simulations reveal the transition from a sooting diffusion flame to a lean premixed flame, which is consistent with experimental findings. LES captures more wrinkled and stretched flames than RANS. Finally, the LES model is employed to investigate the impacts of fuel properties, including heat of vaporization (HoV) and laminar burning speed (SL). Combustion phasing is found more sensitive to SL than to HoV, with a larger fuel property sensitivity of the heat release rate from autoignition than that from deflagration. Moreover, the combustion phasing in the PFS-assisted operation is shown to be less sensitive to SL compared with the well-mixed operation.

fuel property sensitivity↗
DOE OSTI2020

A passive model for the evolution of subgrid-scale instabilities in turbulent flow regimes

In this work, a zero-dimensional model for the development of turbulent mixing layers driven by Rayleigh–Taylor (RT) or Richtmyer–Meshkov (RM) instabilities is presented, for application in Reynolds-Averaged Navier–Stokes (RANS) simulations. The model approximates the behavior of the turbulent mixing layer at a passively advected tracer particle that sits on the material interface of interest in the simulation, and is used to provide initial conditions for the RANS model once the mixing layer width has developed to a size that may be resolved on the computational mesh. The model relies on approximations to the Besnard–Harlow–Rauenzahn (BHR) RANS closure equations and is thus consistent the turbulent development of the mixing layer, unlike previous models of this type which have focused on the early-time laminar development of RT or RM instabilities. These instabilities will often grow through an initially laminar state before developing into turbulence, and criteria for switching from an existing laminar model to the proposed turbulent model are considered. The proposed model reproduces the mixing layer development of RT and RM instabilities seen in mixed width resolving BHR RANS simulations to a reasonable degree of accuracy, and relaxes the need for the RANS simulation to resolve the mixed width as soon as the mixing layer becomes turbulent, which may be impractical in cases where the mixing layer grows through a wide range of scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Advancing Thermal-Hydraulic Modeling Capabilities for Molten Salt Reactors in Pronghorn

This is an M2 report for the NEAMS program. This work focuses on advancing the modeling and simulation capabilities for Molten Salt Reactors (MSRs) within Pronghorn, addressing key thermal-hydraulic challenges that must be addressed for the safe and efficient operation of these advanced reactors. This report summarizes the development and validation of the following new models in Pronghorn: (i) two-equation RANS turbulence models, (ii) near-wall turbulence corrections due to curvature and roughness, and (iii) multidimensional two-phase drift-flux models. For each of these cases, along with the experimental validation, an application study of interest to MSRs is presented. In addition, this report also presents recent improvements in the domain-overlapping coupling between Pronghorn and SAM to address the cases of weakly compressible flow and flow reversal. Finally, an MSR action that greatly simplifies the setup of MSR models using NEAMS tools is described.

42 ENGINEERING↗
NASA NTRSDate not supplied

Exploring Unstructured Mesh Adaptation for Hybrid Reynolds-Averaged Navier–Stokes/Large Eddy Simulation

Mesh adaptation methods for the Reynolds-averaged Navier–Stokes (RANS) equations are rapidly maturing and beginning to impact the design of aerospace vehicles. RANS turbulence modeling improvements have slowed and may stagnate. Wall-modeled large eddy simulation (LES) and hybrid RANS/LES (HRLES) may provide an improved modeling capability but require specialized expertise to construct appropriate meshes and are considered be too ex-pensive for routine practical use. The realization of the CFD Vision 2030 Study includes improving geometry linkage, mesh generation/adaptation, and turbulence modeling/resolving methods for automated management of errors and uncertainties of physics-based, predictive modeling that can set the stage for ensuring a vehicle is in compliance with a regulation or specification (i.e., certification or qualification by analysis). An exploration of mesh adaptation for HRLES is performed to document synergies and challenges between mesh adaptation and HRLES. Vortex breakdown over a delta wing is examined to show the improvement of HRLES over RANS turbulence modeling approaches. A high lift configuration is shown to demonstrate complex geometry capability. Research and development opportunities are identified to advocate for continuing investments that may allow HRLES to enter routine practical use as a tool for aerospace vehicle analysis and design.

Michael A Park↗
NASA NTRSDate not supplied

Large-Eddy Simulations of a Single-Injector Cooling Flow Using the High-Order Flux Reconstruction Method

A single-injector cooling flow into a heated crossflow was used as a validation case for large eddy simulations (LES) from two high-order CFD codes with comparisons to a state-of-the-art Reynolds averaged Navier-Stokes (RANS) turbulence model. The focus of this paper is on the validation of LES for one of the high-order CFD codes, namely the GFR (Glenn Flux Reconstruction) code that is being developed at NASA Glenn Research Center. Fourth-order LES were performed for the single-injector cooling flow configuration at blowing ratios of both 1.0 and 2.0, and a fifth-order LES was also performed with a blowing ratio of 1.0. The GFR simulations agree very well with the experiment mean quantities and reasonably well with the experiment turbulence quantities. The LES solutions from GFR and the other high-order CFD code, FDL3DI, agreed very closely for nearly every flow quantity examined, despite the fact that these two codes use completely different numerical methods, different grid geometries and domains, and different inflow boundary conditions. Finally, both LES show a significant accuracy improvement over RANS turbulence models for flows with large temperature gradients, where the standard gradient diffusion approximation is insufficient for temperature predictions.

Large Eddy Simulations↗
NASA NTRSDate not supplied

Large Eddy Simulations of a Single-Injector Cooling Flow Using the High-Order Flux Reconstruction Method

A single-injector cooling flow into a heated crossflow was used as a validation case for large eddy simulations (LES) from two high-order CFD codes with comparisons to a state-of-the-art Reynolds averaged Navier-Stokes (RANS) turbulence model. The focus of this paper is on the validation of LES for one of the high-order CFD codes, namely the GFR (Glenn Flux Reconstruction) code that is being developed at NASA Glenn Research Center. Fourth-order LES were performed for the single-injector cooling flow configuration at blowing ratios of both 1.0 and 2.0, and a fifth-order LES was also performed with a blowing ratio of 1.0. The GFR simulations agree very well with the experiment mean quantities and reasonably well with the experiment turbulence quantities. The LES solutions from GFR and the other high-order CFD code, FDL3DI, agreed very closely for nearly every flow quantity examined, despite the fact that these two codes use completely different numerical methods, different grid geometries and domains, and different inflow boundary conditions. Finally, both LES show a significant accuracy improvement over RANS turbulence models for flows with large temperature gradients, where the standard gradient diffusion approximation is insufficient for temperature predictions.

Large Eddy Simulation↗
DOE OSTI2022

Dynamic calibration of differential equations using machine learning, with application to turbulence models

We present a methodology for calibration of parametric ordinary and partial differential equation models, using off-the-shelf software for back-propagation in Neural Networks (NN). As a prototypical example, we consider calibration of a Reynolds-averaged Navier-Stokes (RANS) turbulence closure model, against ground truth data from direct numerical simulations (DNS) of two different turbulent flows. Numerical time integration is represented as a custom NN, where only the RANS model parameters are trainable. A loss function is defined to quantify the mismatch between the NN prediction and the ground truth over a predefined, finite time integration window. This loss function is then minimized using a gradient descent method utilizing the back-propagation algorithm. Furthermore, this dynamic approach to training is to be contrasted with a static approach, wherein a least square regression estimate for parameters is obtained in the limit of an infinitesimal time integration window. In a first test of static and dynamic approaches against ground truth data generated by the model, the former proves to be significantly faster and more accurate than the latter at recovering the parameters. When both calibration approaches are tested against DNS data, for which it is known that the model cannot achieve a perfect fit, the static approach yields a good prediction only for short times, while the dynamic approach results in physical and stable predictions over the entire integration window. After optimization of the dynamic approach for time step, spatial resolution, stability, and physics-based constraints, we obtain a 50% improvement of outcomes over those obtained from the existing, manually calibrated set of parameters, demonstrating the merits of this systematic and automated procedure.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2014

Characteristics of Tropical Cyclones in High-Resolution Models of the Present Climate

The global characteristics of tropical cyclones (TCs) simulated by several climate models are analyzed and compared with observations. The global climate models were forced by the same sea surface temperature (SST) in two types of experiments, using a climatological SST and interannually varying SST. TC tracks and intensities are derived from each model's output fields by the group who ran that model, using their own preferred tracking scheme; the study considers the combination of model and tracking scheme as a single modeling system, and compares the properties derived from the different systems. Overall, the observed geographic distribution of global TC frequency was reasonably well reproduced. As expected, with the exception of one model, intensities of the simulated TC were lower than in observations, to a degree that varies considerably across models.

Typical Cyclone↗
NASA NTRS2014

Characteristics of Tropical Cyclones in High-resolution Models in the Present Climate

The global characteristics of tropical cyclones (TCs) simulated by several climate models are analyzed and compared with observations. The global climate models were forced by the same sea surface temperature (SST) fields in two types of experiments, using climatological SST and interannually varying SST. TC tracks and intensities are derived from each model's output fields by the group who ran that model, using their own preferred tracking scheme; the study considers the combination of model and tracking scheme as a single modeling system, and compares the properties derived from the different systems. Overall, the observed geographic distribution of global TC frequency was reasonably well reproduced. As expected, with the exception of one model, intensities of the simulated TC were lower than in observations, to a degree that varies considerably across models.

Tropical Cyclones↗
NASA NTRSDate not supplied

NASA 5.2%-Scale High Lift Common Research Model (CRM-HL) Test in the National Transonic Facility (NTF)

Problem: Predicting CL,max and assessing transition, turbulence models, and Reynolds number effect predictions in CFD requires wind tunnel data for comparison. Objective: Expand the CFD validation database by running multiple models designed using the same reference geometry in various wind tunnels around the world. The wind tunnel data and model geometry will be open source to allow for CFD validation use. Approach: Run the NASA 5.2%-scale High Lift Common Research Model (CRM-HL) semi-span model at the National Transonic Facility (NTF). Test the model at chord Reynolds numbers (Rec) between 1.6 million and 30 million and at varying Q/Es to assess Reynolds number effects and aeroelasticity affects on the model, while collecting force and moment, pressure and wing deformation data. Test the model with ice shapes installed on the leading edges. Results: Ran eight model configurations, including four landing, two landing with ice shapes installed, and two takeoff configurations. Ran in air (120°F) and nitrogen operations (-50°F, -180°F and -250°F) at 7 different chord Reynolds numbers. The data compare well with previous tests of the same model at DLR (The Germany Aerospace Center) and the 14- by 22-Foot Subsonic Tunnel (14x22). Significance: Provided valuable high Reynolds number data on a high lift configuration to the worldwide research community. Provide icing data at flight Reynolds number to the research community.

CRM-HL↗
NASA NTRS2018

Development and Documentation of kL-Based Linear, Nonlinear, and Full Reynolds Stress Turbulence Models

The development and implementation of kL-based Reynolds Average Navier-Stokes (RANS) turbulence models are reported herein. The kL is based on Abdol-Hamid's closure and Menter's modi cation to Rotta's two-equation model. Rotta shows that a reliable transport equation can be formed from the turbulent length scale L, and the turbulent kinetic energy k. Rotta's kL equation is well suited for term-by-term modeling and displays useful features compared to other scale formulation. One of the important di erences is the inclusion of higher order velocity derivatives in the source terms of the scale equation. This can enhance the ability of RANS solvers to simulate unsteady ows in URANS mode. The present report documents the formulation of three model levels of turbulence models as implemented in the CFD code FUN3D. Methodology and calibration examples are shown in detail. The levels are the linear k-kL and the two-equation algebraic Reynolds stress model (ARSM) as well as the full Reynolds Stress Model (RSM). Attached, separated and corner ow cases are documented and compared with experimental, theoretical and other turbulence model data. The results show generally very good comparisons with canonical and experimental data. The results from this formulation are similar or better than results using the SST two- equation turbulence model. ARSM shows great promise with similar level of computational resources as general two equation turbulence models.

Abdol-Hamid, Khaled S.↗
DOE OSTI2026

Development and assessment of models for turbulent Rayleigh-Taylor mixing using the macroscopic forcing method

Reynolds-Averaged Navier Stokes (RANS) simulations are a popular method for designing ICF experiments, and accurate mixing models are crucial for these simulations to give good predictions. To this end, the present work seeks to demonstrate the Macroscopic Forcing Method (MFM) as a tool for both improving existing RANS models as well as assessing RANS model forms. First, MFM analysis from Lavacot et al. (Phys. Rev. Fluids, 2025) is used to develop the k–L–F model, an extension of the k–L model of Dimonte and Tipton (Phys. Fluids, 2006) that incorporates nonlocality through addition of a turbulent species flux transport equation. MFM is then applied to the k–L–F model along with the k–L and BHR–4 models to assess their forms and compare the model-implied eddy diffusivity moments to those measured from high-fidelity simulations. Furthermore, the analysis reveals that models incorporating nonlocality (k–L–F and BHR–4) match the high-fidelity simulation data better than purely local models (k–L), both in terms of mean fields and eddy diffusivity moments. However, all of the considered RANS models struggle to match temporal moments at high Atwood numbers, highlighting the importance of temporal nonlocality in these regimes and the need for additional improvement even among models incorporating nonlocality.

general physics↗