Search NASA⌕ Search

SEARCH · Search NASA

Results for “RANS simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Measurements and Computational Analysis of the Turbulent Corner Flow on the NASA Juncture-Flow Model with a Symmetric Wing

The NASA Juncture Flow Experiment is designed to acquire high-quality flowfield data deep in the corner of a wing-fuselage junction for the purpose of computational fluid dynamics (CFD) validation and turbulence model improvement. This report presents and discusses the results of a recent experiment with the Juncture Flow Model in the NASA Langley 14- by 22-Foot Subsonic Tunnel. The main objective of the test was to expand the existing juncture-flow dataset with a symmetric wing case that displays fully attached, incipient separation, and separated flow in the corner of the wing-fuselage junction, depending on the model angle of incidence. Laser Doppler velocimetry (LDV) measurements were made at three model angles of incidence (0° : fully attached, 1° : incipient separation, and 5° : separated flow) and for each angle, mean-flow and Reynolds-stress data were obtained on the fuselage and at several locations along the corner of the wing-fuselage junction. Supporting measurements were made during the test campaign and include model and tunnel wall static pressures, tunnel wall boundary-layer profiles, oil-flow visualizations, and laser-based measurements of the as-built model geometry and model position in the test section. A companion set of Reynolds-averaged Navier-Stokes (RANS) CFD simulations were also performed and those results were used to support the discussion of the experimental test results.

Juncture Flow↗
DOE OSTI2023

Capturing Time-Varying Wake Dynamics Using Hybridized Actuator Disks in Steady-State Simulations for Improved Optimization Efficiency

When optimizing turbine blade properties, using a time varying, unsteady simulation allows for high-fidelity representations of the wake dynamics. Unfortunately these types of optimizations are prohibitively expensive in terms of computation time and memory requirements. This presentation aims to show a method of transferring the wake dynamics of an unsteady simulation to a much more computationally tractable steady state simulation using hybrid actuator disks informed by unsteady, actuator line model dynamics.

actuator disk model↗
DOE OSTI2023

Numerical and boundary condition effects on the prediction of detonation engine behavior using detailed numerical simulations

High-fidelity numerical simulations of an experimental rotating detonation engine with discrete fuel/air injection were conducted. A series of configurations with different feed-plenum pressures but with constant equivalence ratio were studied. Detailed chemical kinetics for the hydrogen/air system is used. A resolution study for the full rotating detonation engine (RDE) system simulation is also conducted. Two kinds of boundary conditions, a total pressure boundary and a constant mass flow rate boundary, are used to assess the effects of the inlet boundary. As mass flow rate is increased, the total pressure boundary causes more error in the axial pressure distribution while the constant mass flow rate gives a better solution for all cases ran. The simulations confirm experimental findings, and reproduce qualitative as well as some of the quantitative trends. These results demonstrate that a) fuel-air mixing is highly non-uniform within the detonation chamber, leading to variations in local equivalence ratio, b) the fuel and oxidizer injectors experience significant backflow as the detonation wave passes over, but recover at different rates which further augments the inefficiencies in mixing, and c) parasitic combustion in the mixing region makes the detonation wave weak by extending the reaction zone across the wave.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS2011

Ares I and Ares I-X Stage Separation Aerodynamic Testing

The aerodynamics of the Ares I crew launch vehicle (CLV) and Ares I-X flight test vehicle (FTV) during stage separation was characterized by testing 1%-scale models at the Arnold Engineering Development Center s (AEDC) von Karman Gas Dynamics Facility (VKF) Tunnel A at Mach numbers of 4.5 and 5.5. To fill a large matrix of data points in an efficient manner, an injection system supported the upper stage and a captive trajectory system (CTS) was utilized as a support system for the first stage located downstream of the upper stage. In an overall extremely successful test, this complex experimental setup associated with advanced postprocessing of the wind tunnel data has enabled the construction of a multi-dimensional aerodynamic database for the analysis and simulation of the critical phase of stage separation at high supersonic Mach numbers. Additionally, an extensive set of data from repeated wind tunnel runs was gathered purposefully to ensure that the experimental uncertainty would be accurately quantified in this type of flow where few historical data is available for comparison on this type of vehicle and where Reynolds-averaged Navier-Stokes (RANS) computational simulations remain far from being a reliable source of static aerodynamic data.

Pinier, Jeremy T.↗
NASA NTRS2019

Overflow Juncture Flow Computations Compared with Experimental Data

NASA’s Transformational Tools and Technologies Project (T(cu.) is supporting a substantial effort to investigate the formation and origin of separation bubbles found on wing-body juncture zones: the Juncture Flow experiment. The first phase of the Juncture Flow experiment, performed in NASA Langley’s 14- by 22-Foot Subsonic Tunnel, has been completed. This paper documents the CFD analysis done in conjunction with the experiment. Comparisons between CFD simulations and wind tunnel experimental results will be shown. Oil flow results, surface pressure cuts, velocity profiles, and Reynolds stress profiles will be compared. Preliminary results analyzing the effect of grid resolution, wind tunnel walls, and turbulence models on the above data will be presented. The results are not meant to be a validation study, but more as an evaluation of the current status of Reynolds averaged Navier Stokes (RANS) CFD simulations.

Lee, Henry C.↗
NASA NTRS2019

Assessment of Mixer-Ejector Nozzle with Thermal Acoustic Shield for Jet Noise Reduction

A tendency for excessive exhaust jet mixing noise from low bypass ratio turbofan engines is recognized as a key challenge in the design of commercial supersonic aircraft. In this work we investigate a unique combination of two noise mitigation methods as a novel strategy to reduce jet mixing noise. First, a thermal acoustic shield (TAS) is used to reflect high frequency acoustic waves at small angles to the jet axis; second, a mixer-ejector (ME) nozzle is used to mechanically shield noise propagating at large angles to the axis. The ME shroud also provides a convenient location for a TAS nozzle and improves TAS effectiveness by limiting the downstream extent of high frequency noise generation. In an additional benefit for a velocity-matched TAS stream, the ME allows a reduction in strength of the TAS outer shear layer which could serve as a secondary noise source. The present work provides a quantitative assessment of the ME-TAS concept, using a combination of RANS CFD simulations, acoustic analogy calculations for the farfield Green's function, and surrogate-based modeling and parameter space exploration. We first evaluate a subscale configuration, then use scaling arguments to apply subscale results to the systems-level analysis of a flight configuration; the latter configuration includes a generic low bypass ratio turbofan engine with an engine-driven electric generator for supplementary heating of the TAS stream. Additional RANS CFD calculations are performed for a notional ME-TAS geometry based on the full scale configuration, and various modeling assumptions and operational characteristics are evaluated. The ME-TAS concept is shown to provide effective shielding for high frequency jet noise, and should enable comparable noise suppression to a stand-alone ME of considerably greater length, weight and drag. In addition to investigating the integrated ME-TAS system, the present work differs from previous research into TAS and related fluidic shield concepts through the inclusion of modern numerical analysis tools and the systematic numerical examination of various design parameters.

thermal acoustic shield↗
NASA NTRS2013

Assessments of a Turbulence Model Based on Menter's Modification to Rotta's Two-Equation Model

The main objective of this paper is to construct a turbulence model with a more reliable second equation simulating length scale. In the present paper, we assess the length scale equation based on Menter s modification to Rotta s two-equation model. Rotta shows that a reliable second equation can be formed in an exact transport equation from the turbulent length scale L and kinetic energy. Rotta s equation is well suited for a term-by-term modeling and shows some interesting features compared to other approaches. The most important difference is that the formulation leads to a natural inclusion of higher order velocity derivatives into the source terms of the scale equation, which has the potential to enhance the capability of Reynolds-averaged Navier-Stokes (RANS) to simulate unsteady flows. The model is implemented in the PAB3D solver with complete formulation, usage methodology, and validation examples to demonstrate its capabilities. The detailed studies include grid convergence. Near-wall and shear flows cases are documented and compared with experimental and Large Eddy Simulation (LES) data. The results from this formulation are as good or better than the well-known SST turbulence model and much better than k-epsilon results. Overall, the study provides useful insights into the model capability in predicting attached and separated flows.

Abdol-Hamid, Khaled S.↗
DOE OSTI2023

CFD-based design optimization of ducted hydrokinetic turbines

Abstract Hydrokinetic turbines extract kinetic energy from moving water to generate renewable electricity, thus contributing to sustainable energy production and reducing reliance on fossil fuels. It has been hypothesized that a duct can accelerate and condition the fluid flow passing the turbine blades, improving the overall energy extraction efficiency. However, no substantial evidence has been provided so far for hydrokinetic turbines. To investigate this problem, we perform a CFD-based optimization study with a blade-resolved Reynolds-averaged Navier–Stokes (RANS) solver to explore the design of a ducted hydrokinetic turbine that maximizes the efficiency of energy extraction. A gradient-based optimization approach is utilized to effectively deal with the high-dimensional design space of the blade and duct geometry, with gradients being calculated through the adjoint method. The final design is re-evaluated through higher-fidelity unsteady RANS (URANS) simulations. Our optimized ducted turbine achieves an efficiency of about 54% over a range of operating conditions, higher than the typical 46% efficiency of unducted turbines.

13 HYDRO ENERGY↗
DOE OSTI2022

Utilizing CellBox to Describe Varied Dynamical Systems

CellBox is a hybrid modeling framework that integrates machine-learning approaches with explicit mathematical modeling to determine the behavior of dynamical systems, intended for determining the complex interactions of molecule and phenotype within a cellular environment using perturbation/response-based data. The original work utilized analysis of a melanoma cell line, SK-Mel-133, which we sought to expand to and evaluate effectiveness in describing other nonlinear systems both within and outside of biology. We evaluated with two models. One model is based upon the free-fall of an object under a velocity-dependent drag force; this produced inherent perturbation/response data. The other model is based upon a form of mass-action molecular kinetics; for this, we ran the simulation to steady state in each species for each perturbation and select the steady state as input for CellBox. We determined that CellBox, outside of its original use case, can still strongly predict even non-biological dynamical systems in the small-perturbation regime, with r = 0.99977 to 0.85123, p < 0.05 for freefall. However, CellBox cannot accurately predict behavior within large-perturbation regimes, p >> 0.05 for freefall. In addition, we performed a naïve comparison of CellBox network structure to known network structure in the mass-action model to assess accuracy.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Simulations for Planning of Liquid Hydrogen Spill Test

In order to better understand the complex pooling and vaporization of a liquid hydrogen spill, Sandia National Laboratories is conducting a highly instrumented, controlled experiment inside their Shock Tube Facility. Simulations were run before the experiment to help with the planning of experimental conditions, including sensor placement and cross wind velocity. This paper describes the modeling used in this planning process and its main conclusions. Sierra Suite’s Fuego, an in-house computational fluid dynamics code, was used to simulate a RANS model of a liquid hydrogen spill with five crosswind velocities: 0.45, 0.89, 1.34, 1.79, and 2.24 m/s. Two pool sizes were considered: a diameter of 0.85 m and a diameter of 1.7. A grid resolution study was completed on the smaller pool size with a 1.34 m/s crosswind. A comparison of the length and height of the plume of flammable hydrogen vaporizing from the pool shows that the plume becomes longer and remains closer to the ground with increasing wind speed. The plume reaches the top of the facility only in the 0.45 m/s case. From these results, we concluded that it will be best for the spacing and location of the concentration sensors to be reconfigured for each wind speed during the experiment.

08 HYDROGEN↗
NASA NTRS2002

Computation of High Speed Jet Noise

The objective of this work was to use direct numerical simulation (DNS) techniques to study the physics of noise generation by a high-speed turbulent jet. A Mach 0.9, Reynolds number 3,600 jet was selected because of available experimental data. New numerical methods for generating disturbances at the nozzle and computing far-field sound were developed and reported in the course of this work. Over 25 million mesh points were used in the simulations which ran for over 50,000 timesteps and required over 50,000 processor hours on state-of-the-art parallel computer systems to complete. Figures show a visualization of the jet and sound field, a comparison of the mean flow development with the experiment, a directivity comparison with the experiment, and time spectrum comparison with the experiment. Agreement is seen to be excellent. These are fully document in the attached references. Full details of the work, detailed achievements and conclusions are discussed in appendices, which are copies of publications that resulted from this work. We have studied noise mechanisms in supersonic jets, the refraction of sound by turbulence in subsonic jets, and noise sources in conjunction with a DNS of a Mach 0.9 jet.

Freund, Jonathan B.↗
NASA NTRS2004

Studying Turbulence Using Numerical Simulation Databases - X Proceedings of the 2004 Summer Program

This Proceedings volume contains 32 papers that span a wide range of topics that reflect the ubiquity of turbulence. The papers have been divided into six groups: 1) Solar Simulations; 2) Magnetohydrodynamics (MHD); 3) Large Eddy Simulation (LES) and Numerical Simulations; 4) Reynolds Averaged Navier Stokes (RANS) Modeling and Simulations; 5) Stability and Acoustics; 6) Combustion and Multi-Phase Flow.

Moin, Parviz↗
NASA NTRSDate not supplied

Performance Analysis of Optimized STARC-ABL Designs Across the Entire Mission Profile

Boundary layer ingestion (BLI) offers the potential for significant fuel burn reduction by exploiting strong aeropropulsive interactions. NASA’s STARC–ABL concept uses an electri- cally powered BLI tail cone thruster on what is otherwise a traditional airframe. Despite the traditional airframe of this configuration, aeropropulsive integration is critical to the perfor- mance of the BLI propulsor. Furthermore, due to being electrically powered, the fan pressure ratio and efficiency of the BLI tail cone thruster vary widely across the flight envelope, and this variation in fan performance must be accounted for with the aeropropulsive integration of the BLI system. Thus, accurate performance prediction for this novel propulsion configu- ration requires the use of a coupled aeropropulsive model across the flight envelope. In this work, we analyze the off-design performance of 18 optimized designs using an aeropropulsive model that is built with the OpenMDAO framework to couple 3-D RANS CFD simulations to 1-D thermodynamic cycle analyses. The designs are created via high-fidelity aeropropulsive design optimizations that span a range of fan pressure ratio and thrust values at the cruise conditions for the STARC-ABL concept, which was chosen as the aerodynamic design point for the propulsor. Performance analyses we present herein are then performed at a range of off-design flight conditions that span the flight envelope, including low-speed and low-altitude flight conditions. This study provides the first set of high-fidelity data for the STARC–ABL configuration at off-design conditions, and the results quantify the power savings through BLI compared to a traditional propulsion system across the entire mission profile.

optimization↗
NASA NTRSDate not supplied

Transonic Correction to Theodorsen's Theory for Oscillating Airfoil in Pitch and Plunge Toward Flutter

This paper presents a transonic correction method for an oscillating airfoil in pitch and plunge. The proposed method applies correction functions to the Theodorsen’s theory to capture the transonic nonlinear aero- dynamics. These correction functions apply necessary corrections to the amplitudes and the phase angles of the unsteady lift and pitching moment coefficients to account for transonic aerodynamics. The proposed method also postulates a correction for the motion of the aerodynamic center which could be induced by moving shocks. A series of unsteady RANS CFD simulations of the airfoil at the mean aerodynamic chord of the Transonic Truss-Braced Wing aircraft are conducted using FUN3D to provide data to construct these transonic correction functions. The computed responses of the unsteady lift and pitching moment coefficients using these transonic correction functions match the CFD simulation results very well even when the pitching moment coefficient is highly nonlinear. A flutter analysis of an airfoil in pitch and plunge illustrates the potential use of the proposed transonic correction method.

Transonic Flutter↗
NASA NTRSDate not supplied

High-Fidelity Flight Dynamic Analysis of Transonic Truss-Braced Wing

This paper presents a high-fidelity flight dynamic analysis of the Mach 0.8 Transonic Truss-Braced Wing (TTBW). Unsteady RANS CFD simulations of the Mach 0.8 TTBW in pitch, plunge, roll, and yaw oscillations are conducted in FUN3D. The time-domain data are transformed into the frequency-domain data by Fourier series. Transfer functions of the dynamic stability derivatives are then estimated by a frequency-domain re- gression. The dynamic stability derivatives with respect to the angle of attack are determined by the regression of the unsteady aerodynamic coefficients for the plunge motion. The dynamic stability derivatives with re- spect to the pitch rate are determined by the regression of the differential unsteady aerodynamic coefficients for the pitch motion upon the removal of the angle of attack contribution by the plunge motion. Similarly, dynamic stability derivatives with respect to the angle of sideslip, roll rate, and yaw rates are determined from the frequency domain regression. The longitudinal and lateral-direction flight dynamic models of the Mach 0.8 TTBW are constructed from these dynamic stability derivatives. The eigenvalues of the aircraft modes are analyzed to determine the vehicle stability.

Aircraft Stability and Control↗
NASA NTRSDate not supplied

Nonlinear Dynamic Control Derivative Analysis for Aircraft with Application to Transonic Truss-Braced Wing

This paper presents the development of a nonlinear dynamic control derivative estimation method. A nonlinear aerodynamic model is developed to account for the effects of large control surface deflections on aircraft aerodynamic forces and moments. A series of unsteady RANS CFD simulations is performed to simulate the control surface oscillations at various reduced frequencies. The time-domain data are transformed into the frequency-domain data by a Fourier series analysis. Transfer functions of the dynamic control derivatives are then estimated by a frequency-domain regression. The method is applied to the Transonic Truss-Braced Wing (TTBW) to estimate the dynamic control derivatives for the elevator, aileron, and rudder.

Aircraft Control Derivatives↗
NASA NTRSDate not supplied

Classical Flutter Analysis of X-57 Aircraft Mod II, III, and IV Configurations

To support airworthiness assessment of the X-57 electric propulsion demonstrator aircraft, the National Aeronautics and Space Administration (NASA) completed classical flutter analysis of the Mod II, Mod III, and Mod IV aircraft configurations. Aeroelastic analysis was primarily performed using the ZAERO analysis code developed by Zona Technology. Supplemental computational fluid dynamics (CFD) flutter analysis for the Mod III and Mod IV configurations was performed using NASA’s FUN3D software to verify the aeroelastic behavior at deployed flaps conditions. The NASTRAN finite element models (FEMs) used for aeroelastic analysis were developed by NASA. The final Mod II FEM utilized shell elements for the wing and fuselage, and beam elements for the tail and wing control surfaces. For Mod III and Mod IV aircraft models, shell element wing FEMs developed throughout the Mod III/IV wing design cycle were utilized. The fuselage and empennage FEM components were shared between the Mod II, III, and IV aircraft models. ZAERO analyses predicted flutter boundaries were >60% beyond the X-57 flight-test envelope never exceed airspeed (V NE ) for all configurations. Aeroelastic Reynolds-averaged Navier–Stokes (RANS) CFD simulations using FUN3D of the Mod III/IV configurations predicted flap mode instability did not occur until at least speeds of 60% higher than the Mod III/IV maximum flap deployment airspeed (V FE ).

Keerti K. Bhamidipati↗
NASA NTRSDate not supplied

Computationally Efficient Frequency Domain Method for Dynamic Control Derivative Estimation with Application to Transonic Truss-Braced Wing

This paper presents a computationally efficient method for dynamic control derivative estimation technique via control surface oscillation numerical experiments. Unsteady RANS CFD simulations in FUN3D are performed to simulate the control surface oscillations with a prescribed truncated square wave containing sufficient frequencies of interest. The truncated square wave oscillation offers the computational efficiency which reduces the computational cost by almost an order of magnitude compared to a sine wave oscillation. The nonlinear effect of large control surface oscillation amplitudes creates a spillover effect whereby the frequency response at the same input frequencies contains not only the linear aerodynamic response but also nonlinear aerodynamic response. A correction procedure is developed to remove the spillover effect from the linear aerodynamic response. A frequency-domain regression is performed to estimate the dynamic control derivatives after the correction. The results generally agree with the previous results obtained from the sine wave oscillation.

Stability and Control↗