Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reacting Particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Quantifying the Reactivity of Isolated Li x Si Domains in Si Anodes Using Operando NMR

The use of Si anodes can greatly improve the energy density of Li-ion batteries. However, understanding and mitigation of calendar aging remains a barrier to commercialization. Here, in this short report, we utilize operando Nuclear Magnetic Resonance (NMR) spectroscopy to detect and quantify lithium silicides (Li x Si) as they form and react within Si anodes in pouch cells during calendar aging. We provide direct experimental evidence of complex aging phenomena in the Si anodes, including both SEI growth and dissolution during storage. Formation of electrochemically isolated Li x Si is also observed, as indicated by the partial persistence of highly lithiated phases after the cell is discharged. Remarkably, we show that these isolated domains can themselves self-discharge over time, suggesting that their detection can be challenging in post-mortem studies. Finally, we show that aging outcomes depend heavily on the type of silicon particles contained within the electrode, and that certain surface coatings can help decrease the reactivity between lithium silicides and the electrolyte.

Li-ion battery↗
DOE OSTI2020

Biomass Combustion in a Circulating Fluidized Bed Combustor

Interest in circulating fluidized bed (CFB) boilers as a power generation technology has skyrocketed in recent years because of several advantages this technology offers over conventional boilers, such as increased gas-solid mixing resulting in higher combustion efficiency and the ability to use lower quality fuels. CFB combustors are operated at lower temperatures than conventional thermal power generation combustors, thus reducing NO x emissions. SO 2 emissions are conveniently controlled through the addition of Ca-based sulphur sorbents within the combustor. This report summarizes the current modeling effort on a 50 kW th CFB combustor with a diameter of 10 cm and a height of 5 m; designed, built, and operated at CanmetENERGY in Ottawa, Canada employing the multiphase particle-in-cell (PIC) approach in the open-source Multiphase Flow with Interphase eXchanges (MFiX) Software Suite. The MFiX-PIC model parameters for the simulation are tuned against cold-flow experiments from CanmetENERGY using 9 kg of olivine sand as the inert bed material. It is shown that for the relatively coarse fluid meshes and large parcel sizes necessitated by the scale of the simulation, filter size dependent corrections to the drag law must be incorporated to ensure accuracy of the simulation results. The validated cold flow model is extended to simulate reacting flow with torrefied hardwood as the feedstock and to validate the combustion reaction scheme. The species concentrations at the riser outlet are compared against CanmetENERGY’s experiments and show satisfactory agreement. The simulations demonstrate the ability of MFiX-PIC to accurately capture the physics and chemistry of a circulating fluidized bed combustor at bench scales, which can be further extended to pilot- and industrial-scale systems.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Formation and transformation of iron oxy-hydroxide precursor clusters to ferrihydrite

Iron (Fe) oxy-hydroxide minerals such as ferrihydrite (Fh) are ubiquitous in Earth-surface environments and important in biogeochemical element cycling. Recent research has suggested that their formation is preceded by the precipitation of ultrasmall (~1 nm) Keggin-like Fe oxy-hydroxide clusters. However, relatively little is understood about the structure of the precursor clusters and the impacts of pH and time on their growth and transformation to more stable phases. Here, we used a new method that involves mixed flow reactors (MFR) to synthesize these Fe oxy-hydroxide precursor clusters at pH 1.0, 1.5, 2.5, and 4.5. In situ and ex situ synchrotron scattering measurements and laboratory small-angle X-ray scattering (SAXS) were used to study the structure and size of Fe oxy-hydroxide clusters and their transformation products, respectively. Results show that with increasing pH, the particle size and structural order of samples increase, forming solids that resemble 2-line Fh at pH 4.5. The experimental data were compared with X-ray pair distribution functions (PDF) calculated for a range of Fe(III) oxyhydroxide clusters, including Fe 13 Keggin isomers computed previously using density functional theory (DFT), which yielded at best only partial agreement at short range (<5 Å). Aging of the clusters synthesized at pH 1.5 and 2.5 results in growth and transformation via Ostwald ripening to mixtures of goethite (Gt) and lepidocrocite (Lp). This process was inhibited by immediately reacting the early-formed clusters with phosphate (PO 4 3– ), suggesting that oxyanion surface complexes can stabilize the initial clusters by preventing growth and crystallization to more stable phases.

58 GEOSCIENCES↗
DOE OSTI2025

Reactive CO 2 capture and mineralization of magnesium hydroxide to produce hydromagnesite with inherent solvent regeneration

Valorization of multiple low value streams including CO 2 emissions and magnesium-hydroxide bearing mine tailings to produce magnesium carbonate through reactive CO 2 capture and mineralization provides a less explored opportunity to manage several gigatons of CO 2 emissions. To resolve the feasibility of converting magnesium hydroxide to magnesium carbonate through reactive CO 2 capture and mineralization, CO 2 capture solvents such as sodium glycinate are harnessed to capture CO 2 and react directly with Mg(OH) 2 to produce hydromagnesite (Mg 5 [(CO 3 )4(OH) 2 ]·4H 2 O). This approach eliminates the energy-intensive step of producing high purity CO 2 associated with regenerating the solvent, and redissolving CO 2 to produce magnesium carbonate. Interestingly, while temperatures below 50 °C facilitate CO 2 capture, the mineralization kinetics are slow. However, at higher temperatures, accelerated carbon mineralization is favored by the faster kinetics of Mg(OH) 2 dissolution and precipitation of magnesium carbonate. Reacting Mg(OH) 2 at 90 °C with 15 wt% solids in the presence of 2.5 M sodium glycinate after 3 hours under well-stirred conditions results in an extent of carbon mineralization of 75.5%. The theoretical maximum extent of carbon mineralization when hydromagnesite is formed is 80%. Pre-loading CO 2 on the solvent is also an effective approach to ensure that sufficient CO2 is available for reactive CO 2 capture and mineralization, particularly when dilute CO 2 and N 2 mixtures are used. Higher extents of carbon mineralization are associated with an increase in the particle size and a reduction in the cumulative pore volume. These insights unlock the feasibility of harnessing reactive CO 2 capture and mineralization as a pathway to convert magnesium-hydroxide bearing resources into industrially relevant magnesium carbonate products.

Reactive CO2↗
DOE OSTI2025

QXFA 167 Coil Fabrication Report

QXFA is a cosine theta coil used in the MQXFA, a Nb3Sn superconducting accelerator quadrupole magnet to be installed in the High-Luminosity LHC Interaction Regions. A series of MQXFA magnets is fabricated and tested by the US High-Luminosity LHC Accelerator Upgrade Project (AUP). This report details the fabrication process of the QXFA coil (QXFA 167) using Wind-and-React method, conducted from February 6 to March 20, 2025. The content covers coil winding, curing, and reaction, based on the travelers of FNAL as well as the observations and records by the author. The coil fabrication processes following heat reaction, including the impregnation process, are not covered in this report, as they were carried out after March 20.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Innovative use of CaO in combination with amino acid salt to convert CO 2 as CaCO 3 nanoparticles under mild pH and low temperature

The increasing demand for sustainable CO 2 management has driven the development of innovative methods that can convert point source CO 2 into value-added products. In this study, CaO in combination with amino acid salt was used to convert CO 2 into CaCO 3 nanoparticles. Different from the conventional method where CO 2 diffusion presents a major challenge in reacting with CaO to form CaCO 3 , amino acid salt solvent was applied to absorb CO 2 first and then rapidly reacted with CaO to form CaCO 3 nanoparticles (∼50 nm) at a low temperature (e.g., 60 °C). Our experiments showed that at a glycine (Gly)/NaOH ratio of 2:1 or 3:1, the solution pH values during the CO 2 absorption and conversion were about 8–9 at 60 °C, while at a ratio of 1:1, the solution pH values were about 9–11; without Gly, the solution pH values were about 12. Gly-optimized solvent substantially reduced corrosion risk to reactors. In addition, the use of amino acid (i.e., Gly) led to much smaller CaCO 3 particles, distinctly different chemical phases, and fundamentally different chemical reactions. Moreover, in the presence of Gly, the solution pH was completely reversed and the solution was regenerated for cyclic use when CaO was added. The solvent was recyclable and reusable, highlighting the cost-effectiveness and sustainability of this approach. The Gly-modulated CaCO 3 nanoparticles may have significant potential for industrial applications in the biomedicine, construction, plastics, and rubber industries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of cold-cap-bottom shear stress on primary foam stability

Here, we analyze the heat transfer between the melt pool and the layer of reacting materials called cold cap, which is the determining factor for the glass production rate in Joule-heated air-bubbled nuclear waste glass melters. We consider the effects of bubbling rate, melt viscosity, melt thermal conductivity, conversion kinetics, and shear rate at the cold-cap bottom, and develop simple relationships for the cold-cap bottom temperature and glass production rate. We show that the melt convection enhances the heat transfer to the cold cap by suppressing the thermal boundary layer and primary foam, while the conversion kinetics opposes these effects. Additionally, we mention how dissolving silica particles affects the primary foam stability and discuss the limitations of the presented approach for vigorously foaming feeds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Viscosity of transient glass-forming melt and its relation to foaming during batch-to-glass conversion

Primary foam, which affects the heat transfer into the glass batch and the final glass quality, occurs when a sufficient quantity of transient glass-forming melt evolves with viscosity low enough to close the open porosity of the reacting glass batch. To better understand how the fraction of transient melt and its viscosity affect the primary foam temperature range, we determined, with x-ray diffraction, the fraction and composition of the transient glass-forming melt in a heated waste glass melter feed as a function of temperature. Then we prepared a set of transient melts that occurred within the foaming temperature interval and measured their viscosities with spindle and falling sphere viscometers. Further, the results agree with the Adam-Gibbs and VFT viscosity-composition models, even for transient melt compositions outside of the models compositional validity range. As silica and other refractory particles dissolved in the predominantly borate transient melt while temperature increased, viscosity increased from the initial value of ~500 Pa s at the onset of foaming (~650°C) to a maximum of ~770 Pa s when silica dissolution was almost complete (~700°C). As temperature increased further, transient melt viscosity decreased to ~220 Pa s (~850°C) when the primary foam collapsed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Real Time Observation of Lithium Insertion into Pre-Cycled Conversion-Type Materials

Conversion-type electrode materials for lithium-ion batteries experience significant structural changes during the first discharge–charge cycle, where a single particle is taken apart into a number of nanoparticles. This structural evolution may affect the following lithium insertion reactions; however, how lithiation occurs in pre-cycled electrode materials is elusive. In this work, in situ transmission electron microscopy was employed to see the lithium-induced structural and chemical evolutions in pre-cycled nickel oxide as a model system. The introduction of lithium ions induced the evolution of metallic nickel, with volume expansion as a result of a conversion reaction. After pre-cycling, the phase evolutions occurred in two separate areas almost at the same time. This is different from the first lithiation, where the phase change takes place successively, with a boundary dividing the reacted and unreacted areas. Structural changes were restricted at the areas having large amount of fluorine, implying the residuals from the decomposition of electrolytes may have hindered the electrochemical reactions. This work provides insights into phase and chemical evolutions in pre-cycled conversion-type materials, which govern electrochemical properties during operation.

25 ENERGY STORAGE↗
DOE OSTI2024

Software and Firmware-logic Design for the PIP-II Machine Protection System Mode and Configuration Control at Fermilab

The PIP-II Machine Protection System (MPS) requires a dedicated set of tools for configuration control and management of the machine modes and beam modes of the accelerator. The protection system reacts to signals from various elements of the machine according to rules established in a setup database in the form of a Look-Up-Table filtered by the program Mode Controller. This is achieved in accordance with commands from the operator and governed by the firmware logic of the MPS. This paper describes the architecture, firmware logic, and implementation of the program mode controller.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Development of Chromium and Sulfur Getter for Solid Oxide Fuel Cell (SOFC) System

Under the “real world” SOFC operating conditions, gaseous Cr and S species coexist in air stream. The combined Cr and S effect on the electrochemical poisoning of candidate LSM and LSCF electrodes has been investigated. Electrochemical and structural analysis revealed that the combined Cr and S interactions with the LSCF electrode remains significantly different from those of the individual Cr and S interactions. S reacts with the surface SrO accompanied by morphological changes whereas the hexavalent gaseous Cr species mainly deposit at the LSCF/GDC interface as is the case with Cr-only poisoning. For LSM electrode, the combined interactions of Cr and S remains similar to the sum of individual Cr and S effects as SO 2 reacts with Sr-rich regions of the bulk LSM, while Cr deposits at the electrochemically active sites. The use of getter, consisting of alkaline earth and transition metal oxides, has been proposed as a cost-effective approach to mitigate electrode poisoning. SrMnO 3 (SMO) is suggested as a robust getter material for the co-capture of airborne gaseous S and Cr species entering high-temperature electrochemical systems. The honeycomb getter forms, covered with SMO nanoparticles, were fabricated using dip coating. The SMO getter successfully maintained the electrochemical activity of LSM under the presence of gaseous Cr and S species, validating the efficacy of the getter. Post-test characterization revealed that the absorption of S and Cr contaminants led to the elongation of granular SMO particles, forming SrO nanorods and SrCrO 4 whiskers leaving Mn oxides underneath where inward-migrating Cr reside, indicating the high mutual affinity of Sr and Mn. The growth of reaction products during the long term exposure favors continued absorption of incoming S and Cr contaminants. The Mn 2 O 9 dimers, existing on the surface, are considered to help absorb S and Cr impurities, along with the Sr-terminated surface. The SMO getter also displays robust stability in humid environments at high temperatures without phase transformation or hydrolysis, fulfilling the requirement for operation in high-temperature electrochemical systems.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

SootLib: A soot model library for combustion simulation

Soot formation in combustion is an important process that affects radiative heat transfer, flame temperatures, and emissions with health and environmental impacts. Soot formation involves complex chemistry for nucleation, growth, oxidation, and coagulation processes. The soot particles vary widely in size and accurate modeling requires representation of the particle size distribution (PSD). Modeling soot is not trivial, and is only one of several physical processes active in combustion systems. This paper presents a software package called SootLib, which is an open-source library for modeling soot formation and other aerosol systems. SootLib is written in C++, is documented with Doxygen, and is available on GitHub. The library includes several models for soot chemistry and coagulation, and it represents the PSD using either a sectional model or the method of moments (MOM). Four closure approaches for the MOM are implemented allowing up to eight moments: monodispersed, an assumed-shape lognormal distribution, the quadrature method of moments, and the method of moments with interpolative closure. SootLib provides an interface for inclusion in other combustion packages including CFD or reacting flow solvers. The range of models allows comparisons and sensitivity studies, and the modularity facilitates extension to other soot models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Mesoflow: An Open-Source Reacting Flow Solver for Catalysis at Mesoscale

We present the capabilities and software performance metrics of our open-source continuum solver for catalysis, Mesoflow, developed specifically for modeling transport and chemistry at the mesoscale. Our solver utilizes Cartesian block-structured adaptive mesh refinement to resolve complex catalyst surface morphologies directly obtained from X-ray tomography data. An immersed boundary based formulation enables rapid representation of complex geometries prevalent in most mesoporous catalyst interfaces. The solver is developed on top of open-source performance portable library, AMReX, providing parallel execution capabilities on current and upcoming high-performance-computing (HPC) architectures. Our flexible software framework enables integration of complex chemical mechanisms at heterogenous interfaces and time-split algorithms for circumventing highly disparate reaction and flow time-scales. Our current studies indicate a ten-fold performance gain by using graphics-processing-units (GPUs) compared to a single processor for representative problem sizes (2 million cell mesh). We will also present a brief introduction on how to build and use this software for application problems pertaining to catalytic upgrading and gas transport within porous catalyst particles.

adaptive meshing↗
DOE OSTI2025

Monitoring the Structural Health of the Stage-Four Gibbs Resistor In Order to Maintain a Functioning Pulse-Forming Network

The Dual-Axis Radiographic Hydrodynamic Test (DARHT) facility at Los Alamos National Laboratory (LANL) is a critical facility used for nuclear weapons research and development (Los Alamos National Laboratory). Its primary function is to provide high-resolution, real-time images of the behavior of materials under extreme conditions, specifically during the hydrodynamic testing of nuclear weapons surrogates. The facility uses advanced radiographic techniques, such as dual-axis X-ray imaging, to capture detailed snapshots of these materials as they react to high-pressure environments. DARHT plays a key role in maintaining the safety, security, and reliability of the U.S. nuclear arsenal, supporting the Stockpile Stewardship Program. The facility helps ensure that nuclear weapons perform as designed without the need for nuclear tests. Its dual-axis radiography provides more precise data than traditional single-axis imaging, offering a comprehensive view of the internal dynamics of a weapon's primary stage.

42 ENGINEERING↗
DOE OSTI2020

UO 2 + 5 vol% ZrB 2 nano composite nuclear fuels with full boron retention and enhanced oxidation resistance

The boron isotope ( 10 B) can be used as a neutron absorber in UO 2 to control the reactivity of nuclear fuel pellets, however, the boron source can react with oxygen source in UO 2 to form B 2 O 3 that vaporize readily at temperatures above 1200 °C. Unfortunately, the sintering of UO 2 fuel requires hours holding at high temperature (>1700 °C), resulting in an inevitable B loss during sintering and unpredictable B concentration in final product. It is challenging to incorporate boron through a conventional sintering method. In this work, we demonstrated that spark plasma sintering (SPS), a field assisted sintering technology, can effectively densify UO 2 + 5 vol% ZrB 2 composite fuel pellets by rapid consolidation at 1600 °C for a short duration of 5 min under an applied pressure of 40 MPa. Further, thermogravimetric analysis (TGA) measurements confirm that ZrB 2 is fully retained inside the composite fuel pellets. Inside the composite fuel pellets, nano sized ZrB 2 particles are uniformly distributed along the grain boundaries of the UO 2 matrix. The ZrB 2 particle transforms to a glassy B 2 O 3 phase covering the sample surface and grain boundaries of UO 2 matrix after a simple post-sintering annealing at 1000 °C in flowing Argon gas for 4 h. The formed glassy B 2 O 3 slows down the diffusion of oxygen ions and postpones the onset temperature for oxidation of UO 2 from 400 °C to 550 °C. This study demonstrates the capability of SPS, an advanced fuel manufacturing technique, to achieve a full retention of ZrB 2 in UO 2 oxide fuel and increase oxidation resistance through a simple post-sintering annealing. The reported work holds great engineering potential for development of advanced oxide fuel for nuclear application.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Coupled Interfacial and Bulk Kinetics Govern the Timescales of Multiphase Ozonolysis Reactions

Chemical transformations in aerosols impact the lifetime of particle phase species, the fate of atmospheric pollutants, and both climate- and health-relevant aerosol properties. Timescales for multiphase reactions of ozone in atmospheric aqueous phases are governed by coupled kinetic processes between the gas phase, the particle interface, and its bulk, which respond dynamically to reactive consumption of O 3 . However, models of atmospheric aerosol reactivity often do not account for the coupled nature of multiphase processes. Herein, to examine these dynamics, we use new and prior experimental observations of aqueous droplet reaction kinetics, including three systems with a range of surface affinities and ozonolysis rate coefficients ( trans -aconitic acid (C 6 H 6 O 6 ), maleic acid (C 4 H 4 O 4 ), and sodium nitrite (NaNO 2 )). Using literature rate coefficients and thermodynamic properties, we constrain a simple two-compartment stochastic kinetic model which resolves the interface from the particle bulk and represents O 3 partitioning, diffusion, and reaction as a coupled kinetic system. Our kinetic model accurately predicts decay kinetics across all three systems, demonstrating that both the thermodynamic properties of O 3 and the coupled kinetic and diffusion processes are key to making accurate predictions. An enhanced concentration of adsorbed O 3 , compared to gas and bulk phases is rapidly maintained and remains constant even as O 3 is consumed by reaction. Multiphase systems dynamically seek to achieve equilibrium in response to reactive O 3 loss, but this is hampered at solute concentrations relevant to aqueous aerosol by the rate of O 3 arrival in the bulk by diffusion. As a result, bulk-phase O 3 becomes depleted from its Henry's law solubility. This bulk-phase O 3 depletion limits reaction timescales for relatively slow-reacting organic solutes with low interfacial affinity (i.e., trans-aconitic and maleic acids, with k rxn ≈ 10 3 -10 4 M -1 s -1 ), which is in contrast to fast-reacting solutes with higher surface affinity (i.e., nitrite, with k rxn ≈ 10 5 M -1 s -1 ) where surface reactions strongly impact the observed decay kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Modeling Novel Aqueous Particle and Cloud Chemistry Processes of Biomass Burning Phenols and Their Potential to Form Secondary Organic Aerosols

Phenols emitted from biomass burning contribute significantly to secondary organic aerosol (SOA) formation through the partitioning of semivolatile products formed from gas-phase chemistry and multiphase chemistry in aerosol liquid water and clouds. The aqueous-phase SOA (aqSOA) formed via hydroxyl radical (˙OH), singlet molecular oxygen ( 1 O 2 *), and triplet excited states of organic compounds ( 3 C*), which oxidize dissolved phenols in the aqueous phase, might play a significant role in the evolution of organic aerosol (OA). However, a quantitative and predictive understanding of aqSOA has been challenging. Here, we develop a stand-alone box model to investigate the formation of SOA from gas-phase ˙OH chemistry and aqSOA formed by the dissolution of phenols followed by their aqueous-phase reactions with ˙OH, 1 O 2 *, and 3 C* in cloud droplets and aerosol liquid water. Here, we investigate four phenolic compounds, i.e., phenol, guaiacol, syringol, and guaiacyl acetone (GA), which represent some of the key potential sources of aqSOA from biomass burning in clouds. For the same initial precursor organic gas that dissolves in aerosol/cloud liquid water and subsequently reacts with aqueous phase oxidants, we predict that the aqSOA formation potential (defined as aqSOA formed per unit dissolved organic gas concentration) of these phenols is higher than that of isoprene-epoxydiol (IEPOX), a well-known aqSOA precursor. Cloud droplets can dissolve a broader range of soluble phenols compared to aqueous aerosols, since the liquid water contents of aerosols are orders of magnitude smaller than cloud droplets. Further, our simulations suggest that highly soluble and reactive multifunctional phenols like GA would predominantly undergo cloud chemistry within cloud layers, while gas-phase chemistry is likely to be more important for less soluble phenols. But in the absence of clouds, the condensation of low-volatility products from gas-phase oxidation followed by their reversible partitioning to organic aerosols dominates SOA formation, while the SOA formed through aqueous aerosol chemistry increases with relative humidity (RH), approaching 40% of the sum of gas and aqueous aerosol chemistry at 95% RH for GA. Our model developments of biomass-burning phenols and their aqueous chemistry can be readily implemented in regional and global atmospheric chemistry models to investigate the aqueous aerosol and cloud chemistry of biomass-burning organic gases in the atmosphere.

09 BIOMASS FUELS↗
DOE OSTI2023

Flow Measurements in Pressurized Helium Gas Cooling Channels: Rev. 1

Compressed helium gas is used to cool the NorthStar Medical Radioisotope (NMR) target system, also called the trident, chosen due to its superior heat transfer capabilities and its inability to react with Molybdenum-100 (Mo-100) during irradiation. To test the housing and NMR target stack at Los Alamos National Laboratory (LANL), two sets of helium gas flow loop facilities have been set-up and tested. One system is used for bench-top experiments to systematically investigate individual components of the NMR target, and the other, larger system is more representative of the system at NMR and is used for testing the full NMR target stack.

43 PARTICLE ACCELERATORS↗