Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reasoning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Predictability of the early summer surface air temperature over Western South Asia

Variability of the Surface Air Temperature (SAT) over the Western South Asia (WSA) region leads to frequent heatwaves during the early summer (May-June) season. The present study uses the European Centre for Medium-Range Weather Forecast’s fifth-generation seasonal prediction system, SEAS5, from 1981 to 2022 based on April initial conditions (1-month lead) to assess the SAT predictability during early summer season. The goal is to evaluate the SEAS5’s ability to predict the El Niño-Southern Oscillation (ENSO) related interannual variability and predictability of the SAT over WSA, which is mediated through upper-level (200-hPa) geopotential height anomalies. This teleconnection leads to anomalously warm surface conditions over the region during the negative ENSO phase, as observed in the reanalysis and SEAS5. We evaluate SEAS5 prediction skill against two observations and three reanalyses datasets. The SEAS5 SAT prediction skill is higher with high spatial resolution observations and reanalysis datasets compared to the ones with low-resolution. Overall, SEAS5 shows reasonable skill in predicting SAT and its variability over the WSA region. Moreover, the predictability of SAT during La Niña is comparable to El Niño years over the WSA region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Hydraulic constraints to stomatal conductance in flooded trees

Stomatal closure is a pervasive response among trees exposed to flooded soil. We tested whether this response is caused by reduced hydraulic conductance in the soil-to-leaf hydraulic continuum (k total ), and particularly by reduced root hydraulic conductance (k root ), which has been widely hypothesized. We tracked stomatal conductance at the leaf level (g s ) and canopy scale (G s ) along with physiological conditions in two temperate tree species, Magnolia grandiflora and Quercus virginiana, that were subjected to flood and control conditions in a greenhouse experiment. Flooding reduced g s , G s , k root and k total . Path analysis showed strong support for direct effects of k total on g s and for flood duration on k total , but not k root on k total . A process-based model that accounted for the k total reduction predicted the timeseries of G s in flood and control treatment trees reasonably well (predicted versus observed G s R 2 = 0.80 and 0.51 for M. grandiflora and Q. virginiana, respectively). However, accounting only for k root reduction in flooded trees was insufficient for predicting observed G s reduction. Together, these results suggest that hydraulic constraints were not limited to roots and highlight the need to account for flooding effects on k total when projecting forest ecosystem function using process-based models.

Plant stress↗
DOE OSTI2025

Topography-Induced TKE Budget Behavior Over an Amazon Forest

Data from three different heights (35, 50 and 81 m) of one of the ATTO Project towers in the Amazon forest were used to calculate the TKE (turbulence kinetic energy) budget and some other statistics within the RSL (roughness sublayer). The statistical analyses were carried out for unstable and stable cases. The vertical transport and the vertical advection terms do not explain the imbalances found in the TKE budget, highlighting the impor- tance of horizontal terms in complex terrain. Indeed, patterns independent of the time of day were found for vertical transport, horizontal and vertical velocity skewness, the mean vertical component velocity, and momentum and vertical TKE flux. Here, the highest values of mean vertical velocity were observed from the direction where there is a valley near the tower, which may indicate a topographical effect. Monin-Obukhov Similarity Theory (MOST) predictions for the mean velocity gradient, strictly applicable only in the inertial sublayer (ISL), gave reasonable predictions at 35 and 50 m, but dimensionless dissipation rates displayed large scatter. At 81 m, there were clear deviations from MOST for the two functions, disclosing the effect of topography. In addition, a neutral LES (large-eddy simu- lation) study showed good agreement with tower data for the same general wind direction.

ATTO project↗
DOE OSTI2024

Interpreting test temperature and loading rate effects on the fracture toughness of polymer-metal interfaces via time–temperature superposition

Here, in this letter, we present interfacial fracture toughness data for a polymer-metal interface where tests were conducted at various test temperatures T and loading rates $\dot{δ}$. An adhesively bonded asymmetric double cantilever beam (ADCB) specimen was utilized to measure toughness. ADCB specimens were created by bonding a thinner, upper adherend to a thicker, lower adherend (both 6061 T6 aluminum) using a thin layer of epoxy adhesive, such that the crack propagated along the interface between the thinner adherend and the epoxy layer. The specimens were tested at T from 25 to 65 °C and $\dot{δ}$ from 0.002 to 0.2 mm/s. The measured interfacial toughness Γ increased as both T and $\dot{δ}$ increased. For an ADCB specimen loaded at a constant $\dot{δ}$, the energy release rate G increases as the crack length a increases. For this reason, we defined rate effects in terms of the rate of change in the energy release rate $\dot{G}$. Although not rigorously correct, a formal application of time–temperature superposition (TTS) analysis to the Γ data provided useful insights on the observed dependencies. In the TTS-shifted data, Γ decreased and then increased for monotonically increasing $\dot{G}$. Thus, the TTS analysis suggests that there is a minimum value of Γ. This minimum value could be used to define a lower bound in Γ when designing critical engineering applications that are subjected to T and $\dot{δ}$ excursions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advanced Energy Scale Correction Techniques for the X-ray Transition Edge Sensors of the Athena mission

The X-ray Integral Field Unit (X-IFU) onboard the future European X-ray telescope Athena will be the first space instrument carrying an array of more than a thousand transition edge sensors. One of the key challenges of the X-IFU is the measurement of narrow X-ray atomic lines to determine velocity shifts at an unprecedented level of accuracy. For this reason, the energy scale of the instrument needs to be known with extreme accuracy, of 0.4 eV (1σ) up to 7 keV. The energy scale will be measured on the ground through a dedicated calibration campaign using fiducial X-ray sources. Though calibrated, the energy scale is extremely sensitive to the environmental conditions around the TES array, and drifts in the readout chain electronics. Uncorrected, the energy scale can naturally drift up to hundreds of eVs. Changes of the TES gain will be monitored via onboard X-ray calibration sources, and the energy scale will be corrected either per pixel, or within a small groups of pixels. Although simulations show that a 0.4 eV level can be achieved, the very high accuracy required by the X-IFU calls for experimental validation. A dedicated measurement campaign has been performed by NASA Goddard Space Flight Center to characterize the energy scale of a prototype kilo-pixel array of X-IFU-representative TESs. The analysis of the data demonstrated the ability to correct for various drifts using two fiducial lines to track the temporal gain variation. In this paper, we propose to extend this study on the same data set by investigating multi-parameter correction techniques based on both the pulse-height of the fiducial line and the prepulse baseline level, using the knowledge of the TES energy scale at reference temperature/magnetic field set points acquired on the ground. Investigations on the co-adding of pixels to perform a joint correction over pools of pixels is also explored.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Superconducting Density of States of PtPb 4

PtPb 4 is a type II superconductor with a bulk critical temperature T c ≈ 3 K and an upper critical field of H c2 = 0.36 T. PtPb 4 is related to non-superconducting PtSn 4 , which presents nodal arc states at the surface. Here, we measure the superconducting density of states of PtPb 4 using millikelvin Scanning Tunneling Microscopy (STM). We observe a fully opened superconducting gap of Δ = 0.48 meV similar to expectations from Bardeen, Cooper and Schrieffer (BCS) theory (Δ 0 = 1.76k B T c = 0.49 meV). Measurements under magnetic fields applied perpendicular to the surface show a spatially inhomogeneous gap structure, presenting superconducting signatures at fields as high as 1.5 T, significantly above H c2 = 0.36 T. On some locations, we find that the superconducting density of states does not vanish above T c . We can find signatures of a superconducting gap up to 5 K. We discuss possible reasons for the observation of superconducting properties above T c and H c2 , emphasizing the role played by structural defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

A comparison of long-term 37 Ar and 39 Ar transport and implications for 39 Ar as a persistent indicator of underground nuclear explosions

Measurements were first made in 2016 of legacy 39 Ar gas from the decades-old Barnwell underground nuclear explosion site within the Nevada National Security Site. This has raised the question of the ubiquity of the radionuclide 39 Ar following underground nuclear explosions in general locations. This article presents a high-level evaluation of the scientific case for using 39 Ar as a long-term indicator of underground nuclear explosions. Assessment is made based on a broad set of assumptions to reasonably estimate the persistence of 39 Ar in the subsurface environment following an explosion to establish potential detectability years to decades after the originating event.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Simulation Models for Exploring Magnetic Reconnection

Simulations have played a critical role in the advancement of our knowledge of magnetic reconnection. However, due to the inherently multiscale nature of reconnection, it is impossible to simulate all physics at all scales. For this reason, a wide range of simulation methods have been crafted to study particular aspects and consequences of magnetic reconnection. This article reviews many of these methods, laying out critical assumptions, numerical techniques, and giving examples of scientific results. Plasma models described include magnetohydrodynamics (MHD), Hall MHD, Hybrid, kinetic particle-in-cell (PIC), kinetic Vlasov, Fluid models with embedded PIC, Fluid models with direct feedback from energetic populations, and the Rice Convection Model (RCM).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

A General Model for the Ductility of Intermetallics Applied to Fe-Co Alloys

The mechanical properties, specifically ductility, of high performing soft magnets such as Fe-Co alloys are a limiting factor to their broader use in a number of systems. The understanding of the mechanical robustness in these materials is currently insufficient to be able to support the growing interest in applications such as magnetic shielding or electric motors. Fe-Co alloys provide the highest commercially available magnetic saturation and high magnetic permeability but have very poor ductility. The addition of vanadium to these alloys has allowed for significant commercialization and some ductility improvements, but the fundamental reasons for the observed improvements are not well understood. In most published work on mechanical properties in these alloys, the precise chemistry of the alloys investigated, often a critical aspect of intermetallics, is not reported or controlled and thermal history is unclear. This work creates a ductility model that is sensitive to changes in chemistry and can predict relative strain to failure as well as brittle fracture mode for intermetallics and is applied to Fe-Co alloys. Through the application of density functional theory (DFT), this model identifies defect stabilities, anti-phase boundary (APB) energies, the energy necessary to cross-slip, and cleavage energies and combines them through energetic competition to determine a relative failure strain. The model correctly predicts ductility improvements with the addition of vanadium as well as the transition from intergranular to transgranular cleavage, though more precise experiments are necessary to appropriately validate the various improvements observed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Understanding the Effects of Ash Content on Various Pretreatment Technologies for the Bioconversion of Corn Stover

Here, the study aimed to examine the effects of adding biomass ash on the biochemical processes involved in fermentable sugar production. Corn stover was pretreated using several methods—hot water, dilute acid, alkaline, γ-valerolactone, and ionic liquid methods, each examined with ash loadings of 7.18% and 21.07%. The findings demonstrated that increased ash content adversely affected both pretreatment and enzymatic hydrolysis. Specifically, the total sugar yield was 3 to 16% lower at the higher ash content across all pretreatment methods, and up to 4.01% lower during enzymatic hydrolysis. For acidic pretreatment, the sugar yield decreased as ash content increased. In contrast, ash content had a lesser impact on alkaline pretreatment compared to acidic pretreatment. For example, using corn stover with an ash content as high as 22.65% resulted in only a 2.90% decrease in total sugar yield compared to corn stover without added ash. Further, the primary reasons for the reduced sugar yield in higher ash biomass during acidic pretreatments were likely the neutralizing effect of the ash and decreased acid access to the substrates. During enzymatic hydrolysis, ash reduced the sugar yield by limiting enzyme access to cellulose.

09 BIOMASS FUELS↗
DOE OSTI2025

Paper or Plastic? Multiscale Material Handling Properties of Two Model Municipal Solid Waste Streams

Purpose: Municipal Solid Waste (MSW) is a potentially valuable sustainable feedstock for fuel and chemical production due to its carbon-rich content and low cost. This study aims to assess the material handling properties of paperand plastic-rich MSW feedstocks to mitigate equipment failure and processing downtime. Methods: The material handling properties of crumbled MSW feedstocks were measured using apowder rheometer with mass flow hopper calculations to assess handling performance. Inverse gas chromatography was use to measure the surface energy differences between feedstocks. Electron microscopy and Raman spectroscopy was used to evaluate microscale features that may contribute to material handling differences. Results: Plastic and paper rich feedstocks crumbled to a nominal 2 mm particle size were observed to have similar flow and handling characteristics with reasonable hopper outlets. 2 mm plastic rich crumbles, with their higher bulk density, exhibited superior flow performance. By contrast, 4 mm material required significantly larger hopper outlets, indicating poor flowability. Paper rich and 4 mm plastic rich samples displayed broad particle size distributions, which contributed to particle interlocking, jamming, and other flow issues. Electron microscopy revealed that plastic rich samples were significantly smoother, enhancing their flowability compared to the rougher, paper rich materials. Conclusions: This study establishes critical material handling baselines for processing MSW as a viable feedstock for fuel and chemical production. The findings highlight the importance of optimizing particle size and feedstock composition to improve flowability and handling performance.

09 BIOMASS FUELS↗
DOE OSTI2024

Anomaly Detection in Materials Digital Twins with Multiscale ICME for Additive Manufacturing

Detecting anomaly in fatigue and fracture experimental materials science is an interesting yet challenging topic. The reasons are threefold. First, the anomalous microstructure feature that gives rise to structural failure is small, sometimes in the order of 10 -7 of the interrogated volume. This, in turn, results in a highly imbalanced classification problem in machine learning (ML). Second, the consequence is high, in the sense that the test specimen is destructed in such case. Third, the convolution between microstructure stochasticity and the small probability of void nucleation, growth, and coalescence makes failure and fracture a hard-to-predict and challenging problem in materials science due to its irreproducibility, even experimentally. In this paper, we developed a materials digital twin and applied anomaly detection methods to detect voids and anomaly in additive manufacturing (AM). The materials digital twin is driven by two integrated computational materials engineering (ICME) models, which are kinetic Monte Carlo (kMC) and crystal plasticity finite element method (CPFEM). In conclusion, we demonstrated that by using anomaly detection, it is possible to detect voids and other defects in materials digital twin, which paves way for future research in integrating materials digital twin with its physical counterpart.

ICME↗
DOE OSTI2025

A Parametric, Data-Driven, Non-Intrusive Reduced-Order Model Framework for Crystal Plasticity Simulations of Voids

The influence of the internal structure at micrometer length scales on the deformation of polycrystalline materials can be effectively captured using crystal plasticity finite element methods (CPFEM). However, the complexity and nonlinearity of the deformation equations CPFEM solves demand significant computational power and resources to achieve accurate predictions, limiting its broader application. To address this challenge, we have identified a reduced-order representation of the complex data in order to establish a computationally efficient reduced-order models (ROM) and drastically reduce the computational expense of CPFEM. Specifically, in this work, we developed a parametric, data-driven, and non-intrusive ROM framework for CPFEM using proper orthogonal decomposition (POD) and sparse variational Gaussian process (SVGP) regression for single-crystal microstructures under tensile loading conditions. The developed protocol enables one to compress field into a latent/low-dimensional space described by principal component analysis (PCA) via the singular value decomposition (SVD) algorithm. As a result, the high-dimensional data are reduced to a significantly smaller amount of dimensions with POD bases and POD coefficients. Furthermore, we deployed an ensemble of SVGPs—extended from the classical Gaussian process (GP) regression for scalability and handling big data—in a massively parallel manner to train and predict latent POD coefficients using known POD bases from a set of previously obtained simulations results. Lastly, using the predicted POD coefficients, we reconstructed the full-field results and showed reasonable agreement compared with the true values obtained from running CPFEM. The developed framework is validated with a set of CPFEM simulations of a single embedded void in single-crystal aluminum alloy. While the framework is broadly applicable, this work specifically focuses on single-crystal microstructures, a single load case (e.g., tensile), and a specific void geometry (spherical).

Anisotropy↗
DOE OSTI2024

Optimizing High-Throughput Inference on Graph Neural Networks at Shared Computing Facilities with the NVIDIA Triton Inference Server

Abstract With machine learning applications now spanning a variety of computational tasks, multi-user shared computing facilities are devoting a rapidly increasing proportion of their resources to such algorithms. Graph neural networks (GNNs), for example, have provided astounding improvements in extracting complex signatures from data and are now widely used in a variety of applications, such as particle jet classification in high energy physics (HEP). However, GNNs also come with an enormous computational penalty that requires the use of GPUs to maintain reasonable throughput. At shared computing facilities, such as those used by physicists at Fermi National Accelerator Laboratory (Fermilab), methodical resource allocation and high throughput at the many-user scale are key to ensuring that resources are being used as efficiently as possible. These facilities, however, primarily provide CPU-only nodes, which proves detrimental to time-to-insight and computational throughput for workflows that include machine learning inference. In this work, we describe how a shared computing facility can use the NVIDIA Triton Inference Server to optimize its resource allocation and computing structure, recovering high throughput while scaling out to multiple users by massively parallelizing their machine learning inference. To demonstrate the effectiveness of this system in a realistic multi-user environment, we use the Fermilab Elastic Analysis Facility augmented with the Triton Inference Server to provide scalable and high-throughput access to a HEP-specific GNN and report on the outcome.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Progressive Hedging Decomposition for Solutions of Large-Scale Process Family Design Problems

Rapid, wide-scale deployment of green process systems, such as carbon capture or water desalination systems, is essential for combatting climate change. Methods relying on traditional design or modularity fail to capture the benefits of both economies of numbers and economies of scale. We have proposed process family design, which designs a family of processes simultaneously exploiting opportunities for common elements. In previous work, we explored different optimization formulations to solve this problem. In this work, we develop a decomposition approach to tackle larger problems efficiently. We solve a water desalination case study, which is too large to solve within a reasonable timeframe with the discretization formulation. We exploit the block angular structure of the discretization problem to decompose and solve using Progressive Hedging (PH). We use the open-source Python package mpi-sppy to execute PH which allows us to leverage parallelization and a HPC cluster to further improve solution time.

Stinchfield, Georgia↗
DOE OSTI2025

An energetic link between order and strength in metals: A nanocrystalline strength limit in high-entropy alloys and intermetallic compounds

The metallurgy and materials communities have long understood and exploited fundamental links between chemical and structural ordering in metallic solids to tailor their mechanical properties. We extend these ideas to include prediction of the nanocrystalline strength limit in high-entropy alloys and intermetallic compounds, where a breakdown occurs in the classical Hall-Petch strengthening behavior. The highest reported strength achievable through alloying has rapidly climbed and given rise to new classifications of materials with extraordinary properties, with a notable case being nanocrystalline metals. High-entropy alloys (chemically disordered, concentrated solid solutions) and intermetallic compounds are two boundary cases of how tailored order can be used to manipulate mechanical behavior. Here, we show that the complex electronic-structure mechanisms governing the peak strength of alloys and pure metals can be reduced to a few physically meaningful parameters based on their atomic arrangements and used – with no fitting parameters – to predict the maximum strength of these materials. This includes a generalized energy-based accounting for the degree of structural and chemical ordering that allows for rapid and reasonably accurate prediction of peak strength (validated in the nanocrystalline limit) as a function of temperature. Predictions of maximum strength based on the activation energy (with all materials properties derived from DFT calculations or experiments) for a stress-driven transition to an amorphous state is shown to accurately describe the breakdown in Hall-Petch behavior at the smallest crystallite sizes for pure metals, intermetallic compounds, high-entropy alloys, and metallic glasses. Further, this activation energy is also shown to be directly proportional to interstitial electronic charge density, which is a good predictor of ductility, stiffness (moduli), and phase stability in high-entropy alloys and solid metals generally. The proposed framework suggests the possibility of coupling ordering and intrinsic strength to mechanisms like dislocation nucleation, hydrogen embrittlement, and transport properties, such as through correlations between the activation energies for amorphization with stacking-fault and grain boundary energies. It additionally opens the prospect for greatly accelerated structural materials design and development to address materials challenges limiting more sustainable and efficient use of energy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multiscale investigation of thermomechanical and compositional developments in Ni alloy 718 under laser processing

Laser processing has been widely employed in various applications due to its exceptional spatial resolution. However, the rapid temperature gradients generated in localized areas present significant challenges for experimental characterization using conventional instruments. To characterize Ni alloy 718 during laser processing, we employed in-situ synchrotron X-ray diffraction with a high-speed detector, a method particularly well-suited for probing processes with high temporal and spatial resolution. Through a series of in-situ experiments, we investigated the local variations in the evolution of microstructures and thermomechanical behaviors within a keyhole mode melt pool. The in situ macroscopic thermomechanical behaviors were quantified using an empirical model derived from diffraction patterns, with experimental results showing reasonable agreement with finite element analysis. Various laser parameters were tested to assess their influences on the residual strains in the melt pools. The results revealed that the residual strain in the keyhole mode melt pool is relatively insensitive to variations in the parameters and is smaller than that in the melt pool created under conduction mode laser scanning. Additionally, we analyzed the shapes of individual diffraction spots, providing insights into the plastic behaviors and compositional developments in the resolidified alloy. The analysis confirmed that compositional variations in a dendritic microstructure manifest as asymmetric broadening of the diffraction spots.

Ni alloy 718↗
DOE OSTI2025

Quantification of grain rotation in bulk nanostructured copper via in situ heating white beam synchrotron X-ray diffraction

Grain rotation during microstructural relaxation under heating is conventionally studied extensively through transmission electron microscopy and simulations. However, there is a shortage in examining grain rotations at larger length and volume scales in bulk materials. It is critical to understand the thermal stability of bulk nanostructured metals, since those enhanced mechanical properties have been well recognized. Here, this study aimed to employ a white beam microdiffraction X-ray technique under in situ heating from 300 K to 1073 K at 12 K/min on a nanostructured copper processed by high-pressure torsion, yielding an initial grain size of ∼260 nm before the heating. Evaluation across a wide range of temperatures reveals transition temperatures associated with microstructural relaxation processes. By tracking separate Laue diffraction peaks stemming from individual grains, changes in their orientations can be estimated and quantified. This approach becomes particularly effective when the number of grains within the probed volume is reasonably small. At temperatures above 940 K, about 7.5 % of Cu grains are rotating at speeds of ∼2 × 10 –3 °/s. The radial direction of the disk specimen is found to be the preferred direction of grain rotation, with the rotation axis along the shear direction. Further analysis found no correlation between peak intensity and peak size, related to grain sizes and deviatoric strain, respectively, with rotation conditions or speed. These findings demonstrate that the diffraction technique utilizing white beam X-rays is a complementary and novel characterization tool for understanding microstructural evolution, especially in grain rotations, of bulk crystalline materials.

Grain orientation↗