Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reference Model 4”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Effect of the fuel bias distribution in the primary air nozzle on the slagging near a swirl coal burner throat

Three-dimensional numerical simulations of slagging characteristics near the burner throat region were carried out for swirl coal combustion burners used in a 1025 tons/h boiler. The gas/particle two-phase numerical simulation results and the data measured by a particle-dynamics anemometer (PDA) show that the numeration model was reasonable. For the centrally fuel-rich swirl coal combustion burner, the coal particles move in the following way. The particles first flow into furnace with the primary air from the burner throat. After traversing a certain distance, they move back to the burner throat and then toward the furnace again. Thus, particle trajectories are extended. For the case with equal air mass fluxes in the inner and outer primary air/coal mixtures, as the ratio of the coal mass flux in the inner primary air/coal mixture to the total coal mass flux increased from 40 (the reference condition) to 50%, 50 to 70%, and 70 to 100%, the maximum number density declined by 22, 11, and 4%, respectively, relative to the reference condition. In addition, the sticking particle ratio declined by 13, 14, and 8%, respectively, compared to the reference condition. 22 refs., 12 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

An evaluation of experimental decadal predictions using CCSM4

This study assesses retrospective decadal prediction skill of sea surface temperature (SST) variability in initialized climate prediction experiments with the Community Climate System Model version 4 (CCSM4). Ensemble forecasts initialized with two different historical ocean and sea-ice states are evaluated and compared to an ensemble of uninitialized coupled simulations. Both experiments are subject to identical twentieth century historical radiative forcings. Each forecast consists of a 10-member ensemble integrated over a 10-year period. One set of historical ocean and sea-ice conditions used for initialization comes from a forced ocean-ice simulation driven by the Coordinated Ocean-ice Reference Experiments interannually varying atmospheric dataset. Following the Coordinated Model Intercomparison Project version 5 (CMIP5) protocol, these forecasts are initialized every 5 years from 1961 to 1996, and every year from 2000 to 2006. A second set of initial conditions comes from historical ocean state estimates obtained through the assimilation of in-situ temperature and salinity data into the CCSM4 ocean model. These forecasts are only available over a limited subset of the CMIP5 recommended start dates. Both methods result in retrospective SST prediction skill over broad regions of the Indian Ocean, western Pacific Ocean and North Atlantic Ocean that are significantly better than reference skill levels from a spatio-temporal auto-regressive statistical model of SST. However the subpolar gyre region of the North Atlantic stands out as the only region where the CCSM4 initialized predictions outperform uninitialized simulations. Some features of the ocean state estimates used for initialization and their impact on the forecasts are discussed.

Meteorology & Atmospheric Sciences↗

HydraGNN_Predictive_GFM_2026 - Ensemble of predictive graph foundation models for atomistic materials modeling

This release contains data and parameters of HydraGNN-based graph foundation models trained as a result of the work published in the pre-print "Exascale Multi-Task Graph Foundation Models for Imbalanced, Multi-Fidelity Atomistic Data" by M. Lupo Pasini et al. (https://arxiv.org/abs/2604.15380). We jointly train on 16 open first-principles datasets (544+ million structures covering 85+ elements) using a multi-task architecture with per-dataset heads and a scalable ADIOS2/DDStore data pipeline. On Frontier, we execute six large-scale DeepHyper hyperparameter optimization campaigns in FP64 and promote the top-performing message-passing models to sustained 2,048-node training, yielding a PaiNN-based lead model. The version of HydraGNN used to generate the outputs provided in this release is HydraGNN v5.0 (https://github.com/ORNL/HydraGNN/releases/tag/v5.0) The list of datasets used for the training of the graph foundation model is the following: 1) Alexandria [1] 2) ANI1x [2] 3) MPTrj [3] 4) Open Catalyst 2020 (OC20) [4] 5) Open Catalyst 2022 (OC22) [5] 6) Open Catalyst 2025 (OC25) [6] 7) Open Direct ir Capture 2023 (ODAC23) [7] 8) Open Materials 2024 (OMat24) [8] 9) Open Molecules 2025 (OMol25) [9] 10) OMol25-neutral (subset of OMol25 that contains only molecules with zero total charge) 11) OMol25-non-neutral (subset of OMol25 that contains only molecules with non-zero total charge) 12) Open Polymers 2026 (OPoly2026) [10] 13) Nabla2DFT [11] 14) QCML [12] 15) QM7X [reference 13] 16) transition1x [14] Dataset references: [1] J. Schmidt et al., “A dataset of 175k stable and metastable materials calculated with the PBEsol and SCAN functionals,” Scientific Data, vol. 9, p. 64, 2022. [2] J. S. Smith et al., “The ANI-1ccx and ANI-1x data sets, coupled-cluster and density functional theory properties for molecules,” Scientific Data, vol. 7, p. 134, 2020. [Online]. Available: https: //www.nature.com/articles/s41597-020-0473-z [3] A. Jain et al., “Commentary: The Materials Project: A materials genome approach to accelerating materials innovation,” APL Materials, vol. 1, no. 1, p. 011002, 07 2013. [Online]. Available: https://doi.org/10.1063/1.4812323 [4] L. Chanussot et al., “Open catalyst 2020 (oc20) dataset and community challenges,” ACS Catalysis, vol. 11, no. 10, pp. 6059–6072, 2021. [Online]. Available: https://doi.org/10.1021/acscatal.0c04525 [5] K. Tran et al., “Open catalyst 2022 (oc22) dataset and challenges for oxidation electrocatalysts,” ACS Catalysis, vol. 13, no. 5, pp. 3066–3084, 2023. [Online]. Available: https://doi.org/10.1021/acscatal.2c05426 [6] S. J. Sahoo et al., “The open catalyst 2025 (oc25) dataset and models for solid-liquid interfaces,” arXiv preprint arXiv:2509.17862, 2025. [Online]. Available: https://arxiv.org/abs/2509.17862 [7] A. Sriram et al., “The open DAC 2023 dataset and challenges for sorbent discovery in direct air capture,” ACS Central Science, vol. 10, no. 5, pp. 923–941, 2024. [8] L. Barroso-Luque et al., “Open materials 2024 (omat24) inorganic materials dataset and models,” 2024. [Online]. Available: https://arxiv.org/abs/2410.12771 [9] D. S. Levine et al., “The open molecules 2025 (OMol25) dataset, evaluations, and models,” 2025. [Online]. Available: https://arxiv.org/abs/2505.08762 [10] D. S. Levine et al., The open polymers 2026 (OPoly26) dataset and evaluations,” arXiv preprint arXiv:2512.23117, 2025. [Online]. Available: https://arxiv.org/abs/2512.23117 [11] K. Khrabrov et al., “Nabla2dft: A universal quantum chemistry dataset of drug-like molecules and a benchmark for neural network potentials,” in NeurIPS 2024 Datasets and Benchmarks Track, 2024. [Online]. Available: https://openreview.net/forum?id=ElUrNM9U8c [12] S. Ganscha et al., “The QCML dataset, quantum chemistry reference data from 33.5M DFT and 14.7B semi-empirical calculations,” Scientific Data, vol. 12, p. 406, 2025. [13] J. Hoja et al., “QM7-X, a comprehensive dataset of quantum-mechanical properties spanning the chemical space of small organic molecules,” Scientific Data, vol. 8, p. 43, 2021. [Online]. Available: https://www.nature.com/articles/s41597-021-00812-2 [14] M. Schreiner et al., “Transition1x - a dataset for building generalizable reactive machine learning potentials,” Scientific Data, vol. 9, p. 779, 2022. The folder "datasets_ADIOS2_format" contains the set of pre-processed datasets in Adaptable I/O System (ADIOS) format (https://www.exascaleproject.org/research-project/adios/) that have been used for the development and training of GFMs in this work. The "datasets_ADIOS2_format" directory contains 2 sub-directories, one for the version "v1" of the datasets and one for the version "v2" of the datasets. The version "v1" of the datasets provides values of the total energy as they are extracted from the original data as it was released by the respective institutions. The version "v2" of the datasets provides values of the energy that have been realigned. The realignment was performed by training a linear regression model that predicts the total energy as a function of the chemical composition of the atomistic structure, and then subtract such prediction from the original value of the total energy. Both folders "v1" and "v2" contain 16 sub-directories, each corresponding to an ADIOS2-formatted dataset The folder "DeepHyper-results" contains the configurational files and model's parameters for all the 186 HPO trials that were successfully completed by the scalable hyperparameter optimization (HPO) runs on Frontier. The content of the folder "DeepHyper-results" I structured as follows: 1) task-list.txt: list of mpnn name, jobid, and deephyper task id 2) gfm_${MPNN}_${JOBID}_0.${TASKID}: run directory with checkpoint files 3) gfm_${MPNN}: deephyper summary directory (*.csv) for each specific MPNN type 4) deephyper-experiment-${JOBID}: output and error logs for each job The file "deephyper-sorted.csv" contains the details of each HydraGNN model built and tested by HPO, obtained by merging the (*.csv) filed from each HPO run executed. Out of all the HPO trials, we selected 10 to continue the training of the respective HydraGNN models. Due to limited computational budget available in the LRN070 allocation we could not complete the training till convergence for all these 10 selected models. The folder "models" contains multiple sub-folders, one per each HydraGNN model trained. Each model sub-folder contains the parameters of each HydraGNN model, with multiple checkpoint-restarts. The list of sub-folders are as follows: 1) multidataset_hpo-BEST1-fp64 2) multidataset_hpo-BEST2-fp64 3) multidataset_hpo-BEST3-fp64 4) multidataset_hpo-BEST4-fp64 5) multidataset_hpo-BEST5-fp64 6) multidataset_hpo-BEST6-fp64 7) multidataset_hpo-BEST7-fp64 8) multidataset_hpo-BEST8-fp64 9) multidataset_hpo-BEST9-fp64 10) multidataset_hpo-BEST10-fp64 Within each one of these folders, additional auxiliary log files are provided with descriptions about how the training proceeded. The lead PaiNN-model is contained inside "multidataset_hpo-BEST6-fp64". The file "mlp_branch_weights" contains the parameters of the multi-layer perceptron (MLP) used to reconcile the predictions of the 16 output decoding heads of the HydragNN architectures. The MLP takes in input the chemical composition of the atomistic structure and predicts averaging weights to linearly mix the predictions of each output decoding head toward consolidating them into a single one. The folder "1.1billion-structure-inference" contains 1.1 billion atomistic structures randomly generated. Each structures is associated with energy and forces predicted with the lead-PaiNN model combined with the MLP model for reconciliation of the multi-branch predictions generated by the 16 output decoding heads. The folder "1.1billion-structure-inference" contains 9,300 (*.tar.gz) subdirectories, one per Frontier compute node used to execute the inference at exascale. Once uncompressed, each (*.tar.gz) subdirectory contains an ADIOS2 (*.bp) file container, where each atomistic structure is stored as a PyTorch-Geometric Data object. The file "export_dataset_environment_variables.sh" contains the environment variables that need to be set before running the HydraGNN code to reproduce the results provided in this dataset release. The code that can be used to load the ADIOS2 files, load HydraGNN models, and run inference is available at: https://github.com/ORNL/HydraGNN/releases/tag/v5.0

36 MATERIALS SCIENCE↗

Insights into scale translation of methane transport in nanopores

Accurate prediction of flow behavior in shale matrix is critical for efficient development of shale gas reservoirs. In these systems, the majority of pores are in the nano-size range. As a result, continuum-based approaches may not be appropriate to simulate flow in such systems. Molecular dynamics (MD) simulations are capable of capturing the relevant microscale physics. Their relatively high computational expense, however, restricts MD simulations to rather small systems and domains. This limitation creates a gap between computational need of macroscale systems and capabilities of MD simulations. The lattice Boltzmann method (LBM) is a suitable candidate to bridge this gap. In this work, the multiple-relaxation-time (MRT)-LBM is used to study methane transport in nano-size pores. Adsorption effects near solid boundaries, as well as non-ideal behavior of fluids, are accounted for via incorporating appropriate force terms in LBM. In this work, parameters associated with the force terms in the equation of state are studied in detail, and a workflow is proposed to determine optimal values of these parameters for gas flow in slit pores. Specifically, we establish these parameters such that the range of density values that the model is able to simulate is maximized. We demonstrate this workflow by simulating gas flow where velocity and density profiles from MD simulations are used as reference data. Results from LBM simulations are in good agreement with MD reference data for pores that are 4 nm in width or larger. Moreover, we propose a preconditioning scheme to improve the stability of LBM in dealing with complex geometries. The robustness of this scheme is demonstrated by simulating several roughness geometries. This work motivates the use of LBM in scale translation of the physics of mass transport in more complex permeable media.

03 NATURAL GAS↗

Model America - data and models of every U.S. building

The 5-year goal of the 'Model America' concept was to generate a model of every building in the United States. This data repository delivers on that goal. Oak Ridge National Laboratory (ORNL) has developed the Automatic Building Energy Modeling (AutoBEM) software suite to process multiple types of data, extract building-specific descriptors, generate building energy models, and simulate them on High Performance Computing (HPC) resources. For more information, see AutoBEM-related publications (bit.ly/AutoBEM). There were 125,714,640 buildings detected in the United States and this dataset contains 122,930,327 (97.8%) buildings which resulted in a successful simulation. Future, annual updates have been proposed that may include additional buildings, data improvements, or other algorithmic enhancements. This dataset of 122.9 million buildings includes: Models (state_county.zip) - OpenStudio (v3.1.0) and EnergyPlus (v9.4) building energy models. Please note that the download requires the free Globus Connect Personal (https://www.globus.org/globus-connect-personal); Each model has approximately 3,000 building input descriptors that can be extracted. Please see the EnergyPlus(v9.4) 2,784-page Input/Output Reference Guide (https://energyplus.net/sites/all/modules/custom/nrel_custom/pdfs/pdfs_v9.4.0/InputOutputReference.pdf) for everything that can be retrieved or simulated from these models. These models were derived from the following metadata, which is not included in this dataset: 1. ID - unique building ID 2. County - county name 3. State - state name 4. CZ - ASHRAE Climate Zone designation 5. Clim_Zone - text label of climate zone 6. est_year - estimated year of construction 7. est_commercial - estimated building type (0=residential, 1=commercial) 8. Centroid - building center location in latitude/longitude (from Footprint2D) 9. Footprint2D - building polygon of 2D footprint (lat1/lon1_lat2/lon2_...) 10. Height - building height (meters) 11. Area2D - footprint area (ft2) 12. BuildingType - DOE prototype building designation (IECC=residential) as implemented by OpenStudio-standards 13. WWR_surfaces - percent of each facade (pair of points from Footprint2D) covered by fenestration/windows (average 14.5% for residential, 40% for commercial buildings) 14. NumFloors - number of floors (above-grade) 15. Area - estimate of total conditioned floor area (ft2) 16. Standard - building vintage. These models are made free and openly available in hopes of stimulating any simulation-informed use case. Data is provided as-is with no warranties, express or implied, regarding fitness for a particular purpose. We wish to thank our sponsors which include Oak Ridge National Laboratory (ORNL) Laboratory Directed Research and Development (LDRD), U.S. Dept. of Energy's (DOE) Building Technologies Office (BTO), Office of Electricity (OE), Biological and Environmental Research (BER), and National Nuclear Security Administration (NNSA). This research used resources of the Argonne Leadership Computing Facility, which is a DOE Office of Science User Facility supported under Contract DE-AC02-06CH11357. Please cite as: New, Joshua R., Adams, Mark, Bass, Brett, Berres, Anne, and Clinton, Nicholas (2021). 'Model America - data and models of every U.S. building. [Data set].' Constellation, doi.ccs.ornl.gov/ui/doi/339, April 14, 2021

24 POWER TRANSMISSION AND DISTRIBUTION↗

EXPLORING IO'S ATMOSPHERIC COMPOSITION WITH APEX: FIRST MEASUREMENT OF {sup 34}SO{sub 2} AND TENTATIVE DETECTION OF KCl

The composition of Io's tenuous atmosphere is poorly constrained. Only the major species SO{sub 2} and a handful of minor species have been positively identified, but a variety of other molecular species should be present, based on thermochemical equilibrium models of volcanic gas chemistry and the composition of Io's environment. This paper focuses on the spectral search for expected yet undetected molecular species (KCl, SiO, S{sub 2}O) and isotopes ({sup 34}SO{sub 2}). We analyze a disk-averaged spectrum of a potentially line-rich spectral window around 345 GHz, obtained in 2010 at the APEX 12 m antenna. Using different models assuming either extended atmospheric distributions or a purely volcanically sustained atmosphere, we tentatively measure the KCl relative abundance with respect to SO{sub 2} and derive a range of 4 × 10{sup –4}-8 × 10{sup –3}. We do not detect SiO or S{sub 2}O and present new upper limits on their abundances. We also present the first measurement of the {sup 34}S/{sup 32}S isotopic ratio in gas phase on Io, which appears to be twice as high as the Earth and interstellar medium reference values. Strong lines of SO{sub 2} and SO are also analyzed to check for longitudinal variations of column density and relative abundance. Our models show that, based on their predicted relative abundance with respect to SO{sub 2} in volcanic plumes, both the tentative KCl detection and SiO upper limit are compatible with a purely volcanic origin for these species.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of chain microstructure on solution and thin film self-assembly of PCHD-based semi-flexible/flexible diblock copolymers

We examine self-assembly of semi-flexible/flexible block copolymers in a selective solvent iusing a set of diblock copolymers where the chain microstructure of the semi-flexible block is manipulated in order to tune chain stiffness. The reduced conformational space of the semi-flexible block is anticipated to alter the way the chains pack, potentially changing the structure of self-assembled aggregates in comparison to flexible diblock copolymer analogs. Semi-flexible/flexible diblock copolymers comprised of poly(styrene)-block-poly(1,3-cyclohexadiene) (PS-b-PCHD) having systematic changes in chain microstructure, as captured by the ratio of 1,4/1,2-linkages between cyclohexenyl repeat units, and molecular weight of the PCHD blocks were synthesized using anionic polymerization. Moreover, these diblocks were dissolved in tetrahydrofuran (THF), which is a preferential solvent for PS, and the structures formed were examined using laser light scattering and complementary imaging techniques. Results show that PS-b-PCHD copolymers with a chain microstructure of 90% 1,4/10% 1,2 linkages between cyclohexenyl repeat units (referred to simply as 90/10) are able to micellize, forming spherical structures, while diblocks of 70/30 and 50/50 1,4-to-1,2 ratios remain as single chains and ill-defined aggregates, respectively, when dissolved in THF. With inferences drawn from simple structural models, we speculate that this self-assembly behavior arises due to the change in the chain configuration with increasing content of 1,2-links in the backbone. Finally, this renders the chain with higher 1,2 content incapable of swelling in response to solvent and unable to pack into well-defined self-assembled structures.

36 MATERIALS SCIENCE↗

Absence of quantum confinement effects in the photoluminescence of Si{sub 3}N{sub 4}–embedded Si nanocrystals

Superlattices of Si-rich silicon nitride and Si{sub 3}N{sub 4} are prepared by plasma-enhanced chemical vapor deposition and, subsequently, annealed at 1150 °C to form size-controlled Si nanocrystals (Si NCs) embedded in amorphous Si{sub 3}N{sub 4}. Despite well defined structural properties, photoluminescence spectroscopy (PL) reveals inconsistencies with the typically applied model of quantum confined excitons in nitride-embedded Si NCs. Time-resolved PL measurements demonstrate 10{sup 5} times faster time-constants than typical for the indirect band structure of Si NCs. Furthermore, a pure Si{sub 3}N{sub 4} reference sample exhibits a similar PL peak as the Si NC samples. The origin of this luminescence is discussed in detail on the basis of radiative defects and Si{sub 3}N{sub 4} band tail states in combination with optical absorption measurements. The apparent absence of PL from the Si NCs is explained conclusively using electron spin resonance data from the Si/Si{sub 3}N{sub 4} interface defect literature. In addition, the role of Si{sub 3}N{sub 4} valence band tail states as potential hole traps is discussed. Most strikingly, the PL peak blueshift with decreasing NC size, which is often observed in literature and typically attributed to quantum confinement (QC), is identified as optical artifact by transfer matrix method simulations of the PL spectra. Finally, criteria for a critical examination of a potential QC-related origin of the PL from Si{sub 3}N{sub 4}-embedded Si NCs are suggested.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relativistic MR-MP Energy Levels for L-shell Ions of Sulfur and Argon

Calculated level energies for valence and K-vacancy states are given for the ion series S vii–S xiv and Ar ix–Ar xvi. The calculations were performed with the relativistic Multi-Reference Møller–Plesset Perturbation Theory method (MR-MP). The data set includes all the level energies with configurations $1{s}^{2}2{(s,p)}^{q}$, $1{s}^{2}2{(s,p)}^{q-1}{nl}$, $1{s}^{1}2{(s,p)}^{q+1}$, $1{s}^{1}2{(s,p)}^{q}{nl}$, $2{(s,p)}^{q+2}$, and $2{(s,p)}^{q+1}{nl}$, where 1 ≤ q ≤ 8, n ≤ 5, and l ≤ 3. We have compared our results with data from the National Institute of Standards and Technology (NIST) online database and with previous calculations. The average deviation of valence level energies ranges from 0.16 eV in Ne-like ions to 0.01 eV in Li-like ions, demonstrating that the present MR-MP valence level energies are highly accurate. In the case of K-vacancy states, the deviation is generally below 0.3 eV for Li-like S xiv and Ar xvi. The deviation for K-vacancy energies in other L-shell ions (Be-, B-, C-, N-, and O-like Ar ions) is higher but likely because the NIST-recommended values have a higher uncertainty. The data set includes many n = 4 and n = 5 valence and K-vacancy levels in L-shell ions of S and Ar that have not been previously reported. The data can be used for line identification and modeling of L-shell ions of S and Ar in astrophysical and laboratory-generated plasmas, and as energy references in the absence of more accurate laboratory calculations.

79 ASTRONOMY AND ASTROPHYSICS↗

{sup 18}F-Choline Positron Emission Tomography/Computed Tomography and Multiparametric Magnetic Resonance Imaging for the Detection of Early Local Recurrence of Prostate Cancer Initially Treated by Radiation Therapy: Comparison With Systematic 3-Dimensional Transperineal Mapping Biopsy

Purpose: To compare the diagnostic performance of {sup 18}F-fluorocholine positron emission tomography/computed tomography (FCH-PET/CT), multiparametric prostate magnetic resonance imaging (mpMRI), and a combination of both techniques for the detection of local recurrence of prostate cancer initially treated by radiation therapy. Methods and Materials: This was a retrospective, single-institution study of 32 patients with suspected prostate cancer recurrence who underwent both FCH-PET/CT and 3T mpMRI within 3 months of one another for the detection of recurrence. All included patients had to be cleared for metastatic recurrence. The reference procedure was systematic 3-dimensional (3D)-transperineal prostate biopsy for the final assessment of local recurrence. Both imaging modalities were analyzed by 2 experienced readers blinded to clinical data. The analysis was made per-patient and per-segment using a 4-segment model. Results: The median prostate-specific antigen value at the time of imaging was 2.92 ng/mL. The mean prostate-specific antigen doubling time was 14 months. Of the 32 patients, 31 had a positive 3D-transperineal mapping biopsy for a local relapse. On a patient-based analysis, the detection rate was 71% (22 of 31) for mpMRI and 74% (23 of 31) for FCH-PET/CT. On a segment-based analysis, the sensitivity and specificity were, respectively, 32% and 87% for mpMRI, 34% and 87% for FCH-PET/CT, and 43% and 83% for the combined analysis of both techniques. Accuracy was 64%, 65%, and 66%, respectively. The interobserver agreement was κ = 0.92 for FCH-PET/CT and κ = 0.74 for mpMRI. Conclusions: Both mpMRI and FCH-PET/CT show limited sensitivity but good specificity for the detection of local cancer recurrence after radiation therapy, when compared with 3D-transperineal mapping biopsy. Prostate biopsy still seems to be mandatory to diagnose local relapse and select patients who could benefit from local salvage therapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Relativistic effects in ab initio electron-nucleus scattering

The electromagnetic responses obtained from Green's function Monte Carlo (GFMC) calculations are based on realistic treatments of nuclear interactions and currents. The main limitations of this method comes from its nonrelativistic nature and its computational cost, the latter hampering the direct evaluation of the inclusive cross sections as measured by experiments. We extend the applicability of GFMC in the quasielastic region to intermediate momentum transfers by performing the calculations in a reference frame that minimizes nucleon momenta. Additional relativistic effects in the kinematics are accounted for employing the two-fragment model. In addition, we developed a novel algorithm, based on the concept of first-kind scaling, to compute the inclusive electromagnetic cross section of 4 He through an accurate and reliable interpolation of the response functions. A very good agreement is obtained between theoretical and experimental cross sections for a variety of kinematical setups. Finally, this offers a promising prospect for the data analysis of neutrino-oscillation experiments that requires an accurate description of nuclear dynamics in which relativistic effects are fully accounted for.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Technical Review Report for the "Justification for Small Gram Quantity Contents" Safety Analysis Report for Packaging Model 9977-96, Addendum 3, S-SARA-G-00006, Revision 4

This Technical Review Report (TRR) summarizes the results of the Staff’s review of the Model 9977-96 Package, Addendum 3, Revision 4 for the Type 4 contents. Type 4 contents may include 238 Pu, 239 Pu, 241 Am, 244 Cm, 252 Cf, 90 Sr, 226 Ra, 137 Cs, 60 Co, 192 Ir with the Special Actinide Isotopes ( 242 mAm, 243 Cm, 245 Cm, 247 Cm, 249 Cf and 251 Cf) limited to a total of 1000 ppm. Type 4 pertains primarily to the Off-Site Source Recovery Project (OSRP). These new contents will be authorized for shipment in the Model 9977-96 Package, supplementing existing Revision 2 to the Safety Analysis Report for Packaging (SARP), once Addendum 3, Justification for Small Gram Quantity (SGQ) Contents, is accepted by the certifying official, EM-40, and the existing Certificate of Compliance (CoC) is revised, reflecting the added contents. Existing Content Envelopes for the Model 9977-96 Package include heat sources in food-pack cans or in radioisotope thermoelectric generators (RTGs), neptunium metal, a beryllium-reflected plutonium ball, plutonium/uranium metal at 25% and 50% maximum 240Pu, respectively, and uranium metal at limits of 95% and 100% 235U, respectively. The percentages are of total radioactive material mass. The Isentropic Compression Experiment (ICE) apparatus is an additional content of the Model 9977-96 Package SARP. The latest content added to the Model 9977-96 Package is Type 5, AGR fuel compacts. Addendum 3 was prepared by Savannah River Packaging Technology, Savannah River National Laboratory, Savannah River Nuclear Solutions, LLC, Savannah River Site, in support of work being performed by LANL. The Model 9977-96 Package is currently certified under two Certificate of Compliance Numbers, i.e., USA/9977/B(M)F-96 (DOE) and USA/9977/B(M)F-96 (DOE-S/T-1), covering transportation and periodic and extended maintenance, respectively. For transportation, the Safety Analysis Report for Packaging is S-SARP-G-0001, Revision 2 (August 2007). Extended maintenance is covered by Addendum 1, Justification for DNDO Contents, S-SARA-G-00003, Revision 2 (October 2008). The new Content Envelope and container configurations will be incorporated into the next revision to the Model 9977-96 Package SARP. This TRR addresses only Type 4 contents; content Types 1, 2, and 3 will be covered under a separate TRR. Content Type 5 has been dealt with in a previous TRR. Hereafter, in this TRR, the Type 4 content may be referred to as Sources.

61 RADIATION PROTECTION AND DOSIMETRY↗

FY2015 ceramic fuels development annual highlights

Key challenges for the Advanced Fuels Campaign are the development of fuel technologies to enable major increases in fuel performance (safety, reliability, power and burnup) beyond current technologies, and development of characterization methods and predictive fuel performance models to enable more efficient development and licensing of advanced fuels. Ceramic fuel development activities for fiscal year 2015 fell within the areas of 1) National and International Technical Integration, 2) Advanced Accident Tolerant Ceramic Fuel Development, 3) Advanced Techniques and Reference Materials Development, and 4) Fabrication of Enriched Ceramic Fuels. High uranium density fuels were the focus of the ceramic fuels efforts. Accomplishments for FY15 primarily reflect the prioritization of identification and assessment of new ceramic fuels for light water reactors which have enhanced accident tolerance while also maintaining or improving normal operation performance, and exploration of advanced post irradiation examination techniques which will support more efficient testing and qualification of new fuel systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FY2016 Ceramic Fuels Development Annual Highlights

Key challenges for the Advanced Fuels Campaign are the development of fuel technologies to enable major increases in fuel performance (safety, reliability, power and burnup) beyond current technologies, and development of characterization methods and predictive fuel performance models to enable more efficient development and licensing of advanced fuels. Ceramic fuel development activities for fiscal year 2016 fell within the areas of 1) National and International Technical Integration, 2) Advanced Accident Tolerant Ceramic Fuel Development, 3) Advanced Techniques and Reference Materials Development, and 4) Fabrication of Enriched Ceramic Fuels. High uranium density fuels were the focus of the ceramic fuels efforts. Accomplishments for FY16 primarily reflect the prioritization of identification and assessment of new ceramic fuels for light water reactors which have enhanced accident tolerance while also maintaining or improving normal operation performance, and exploration of advanced post irradiation examination techniques which will support more efficient testing and qualification of new fuel systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a high current density, high temperature superconducting cable for pulsed magnets

Abstract A low AC loss Rare Earth Barium Copper Oxide (REBCO) cable, based on the VIPER cable technology has been developed by Commonwealth Fusion Systems for use in high field, REBCO based tokamaks. The new cable is composed of partitioned and transposed copper ‘petals’ shaped to fit together in a circular pattern with each petal containing a REBCO tape stack and insulated from each other to reduce AC losses. A stainless steel jacket adds mechanical robustness—also serving as a vessel for solder impregnation—while a tube runs through the middle for cooling purposes. Additionally, fiber optic sensors are placed under the tape stacks for quench detection. To qualify this design, a series of experiments were conducted as part of the SPARC tokamak Central Solenoid Model Coil program—to retire the risks associated with full scale, fast ramping, high flux HTS Central Solenoid (CS) and Poloidal Field (PF) coils for tokamak fusion power plants and net energy demonstrators. These risk study and risk reduction experiments include (1) AC loss measurement and model validation in the range of ~5 T/s, (2) an IxB electromagnetic loading of over 850 kN/m at the cable level and up to 300 kN/m at the stack level, (3) a transverse compression resilience of over 350 MPa, (4) manufacturability at tokamak relevant speeds and scales, (5) cable to cable joint performance, (6) fiber optic based quench detection speed, accuracy, and feasibility, and (7) overall winding pack integration and magnet assembly. The result is a cable technology, now referred to as PIT VIPER, with AC losses that measure fifteen times lower (at ~5 T/s) than its predecessor technology; a 2% or lower degradation of critical current (Ic) at high IxB electromagnetic loads; no detectable Ic degradation up to 570 MPa of transverse compression on the cable unit cell; end to end magnet manufacturing, consistently producing Ic values within 7% of the model prediction; cable to cable joint resistances at 20 K on the order of ~15 nΩ; and fast, functional quench detection capabilities that do not involve voltage taps. This cable technology will be tested comprehensively in a Central Solenoid Model Coil to prove its readiness for compact, high field tokamak operation.

Sanabria, Charlie (ORCID:0000000150175309)↗

Reference Model 3 Full Scale Geometry (RM3: Wave Point Absorber)

Contains the Reference Model 3 (RM3) full scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was generated upon completion of the project on September 30, 2014. The Reference Model Project (RMP), sponsored by the U.S. Department of Energy (DOE), was a partnered effort to develop open-source MHK point designs as reference models (RMs) to benchmark MHK technology performance and costs, and an open-source methodology for design and analysis of MHK technologies, including models for estimating their capital costs, operational costs, and levelized costs of energy. The point designs also served as open-source test articles for university researchers and commercial technology developers. The RMP project team, led by Sandia National Laboratories (SNL), included a partnership between DOE, three national laboratories, including the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Oak Ridge National Laboratory (ORNL), the Applied Research Laboratory of Penn State University, and Re Vision Consulting. Reference Model 3 (RM3) is a wave point absorber, also referred to as a wave power buoy, that was designed for a reference site located off the shore of Eureka in Humboldt County, California. The design of the device consists of a surface float that translates (oscillates) with wave motion relative to a vertical column spar buoy, which connects to a subsurface reaction plate. This two-body point absorber converts wave energy into electrical power predominately from the device's heave oscillation induced by incident waves; the float is designed to oscillate up and down the vertical shaft up to 4 m. The bottom of the reaction plate is about 35 m below the water surface. The device is targeted for deployment in water depths of 40 m to 100 m. The point absorber is also connected to a mooring system to keep the floating device in position.

16 TIDAL AND WAVE POWER↗

CMIP6-based Multi-model Hydroclimate Projection over the Conterminous US

We present a suite of high-resolution downscaled hydro-climate projections over the conterminous United States (CONUS) based on a six-member General Climate Model (GCM) ensemble from the Coupled Models Intercomparison Project phase 6 (CMIP6). The CMIP6 GCMs are downscaled using two different downscaling approaches (statistical-based DBCCA & dynamical-based RegCM) based on two meteorological reference observations (Daymet & Livneh), and then fed to two calibrated hydrologic models (VIC & PRMS) to simulate projected future hydrologic responses. Each ensemble member covers 1980–2019 in the historic period and 2020–2059 in the near-term future period under the high-end (SSP585) emission scenario. Major variables such as daily maximum temperature (tmax), daily minimum temperature (tmin), daily total precipitation (prcp), daily average wind speed (wind), and daily total runoff (runoff) at 1/24° (~4 km) spatial resolution across the CONUS are provided through this data portal. This dataset is derived to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). Further details of this dataset can be referred to Kao et al. (2022) and Rastogi et al. (2022).

13 HYDRO ENERGY↗

Reference Model 3 Scaled Geometry (RM3: Wave Point Absorber)

Contains the Reference Model 3 (RM3) scaled scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These scaled geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. The scaled RM3 device was tested at the Scripps Institution of Oceanography at the University of California at San Diego wave tank, details of which are described in the included test report. The scale of the geometries included in this submission are at a 1:33 scale compared to the full scale geometry. This data was generated upon completion of the project on September 30, 2014. The Reference Model Project (RMP), sponsored by the U.S. Department of Energy (DOE), was a partnered effort to develop open-source MHK point designs as reference models (RMs) to benchmark MHK technology performance and costs, and an open-source methodology for design and analysis of MHK technologies, including models for estimating their capital costs, operational costs, and levelized costs of energy. The point designs also served as open-source test articles for university researchers and commercial technology developers. The RMP project team, led by Sandia National Laboratories (SNL), included a partnership between DOE, three national laboratories, including the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Oak Ridge National Laboratory (ORNL), the Applied Research Laboratory of Penn State University, and Re Vision Consulting. Reference Model 3 (RM3) is a wave point absorber, also referred to as a wave power buoy, that was designed for a reference site located off the shore of Eureka in Humboldt County, California. The design of the device consists of a surface float that translates (oscillates) with wave motion relative to a vertical column spar buoy, which connects to a subsurface reaction plate. This two-body point absorber converts wave energy into electrical power predominately from the device?s heave oscillation induced by incident waves; the float is designed to oscillate up and down the vertical shaft up to 4 m. The bottom of the reaction plate is about 35 m below the water surface. The device is targeted for deployment in water depths of 40 m to 100 m. The point absorber is also connected to a mooring system to keep the floating device in position.

16 TIDAL AND WAVE POWER↗