Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rock sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Comparison of single crack propagation in lunar analogue glass and the failure strength of rocks

New data of crack propagation in lunar analogue glass provides important input for the construction of deformation maps (maps which delineate the rates and principal means of material deformation under various environmental conditions) applicable to the lunar crust. Comparison of single crack propagation data obtained on flat plates of glass and failure strength data obtained on fine grained rock samples show that single crack propagation velocities are directly related to the failure strength of rocks. The chemical reaction between water and silicon-oxygen bonds at the crack tip seems to be of first order. This greatly simplifies extrapolation to low partial pressures of H2O

Soga, N.↗

A Model-based Approach to Developing the Concept of Operations for Potential Mars Sample Return

Mars Sample Return (MSR) is a proposed multi-agency effort that would return soil and rock samples from the surface of Mars to Earth. Both the complexity of the potential missions, as well as the involvement of multiple geographically distributed organizations, presents a challenge from an information management perspective. In this paper, a Model-based Systems Engineering (MBSE) approach to developing the Concept of Operations of a potential Mars Sample Return effort using the System Modeling Language(SysML) is presented.

Muirhead, Brian↗

Solid State Studies of the Radiation Histosy of Lunar Samples

Particle track densities up to greater than 3 x 10(exp 9) per square centimeter have been measured in different samples. Rocks 17, 47, 57, and 58 have VH (Z greater than 22) galactic cosmic ray ages of 11, 14, 28, and 13 x 10(exp 6) years, respectively. Rock 57 has a calculated erosion rate of approximately less than 10(exp -7) centimeter per year. Near-surface track versus depth data in rock 17 can be fit with solar flare particles that have a differential energy spectrum alpha E(exp -s); lunar samples can be used to study the history of solar activity. The uranium in the crystalline rocks occurs principally in small regions less than 10 to approximately equal to 100 micrometers in size. The (low) thermoluminescence of the fines increases with depth in core 10004. With one possible exception, x-ray studies have not shown pronounced radiation damage effects. The total energy release upon heating is small up to 900 C and occurs in three broad regions.

Crozaz, G.↗

The physical basis for spectral variations in thermal infrared emittance of silicates and application to remote sensing

The use of infrared spectroscopy for the remote characterization of planetary surfaces has received attention due to efforts in the investigation of these bodies from space. In the 8 to 14 micron region, a depression in the emittance spectra of rocks (sometimes called reststrahlen) is related to the fundamental stretching vibrations of Si-O bonds and shifts in the locations of this feature are ascribed to variations in rock composition. Thus, it should be possible to investigate, quantify, and model the relationships of reststrahlen spectral band location through silicate mineralogical composition to rock classification. This concept will be tested first through the use of laboratory-acquired data on the infrared spectra and mineralogy of selected mineral and rock samples. As a suitable classification model is developed, it will be tested through overflights of appropriate rock outcrops using the Thermal Infrared Multispectral Scanner (TIMS).

Walter, Louis S.↗

Microbial Habitability in Gale Crater: Sample Analysis at Mars (SAM) Instrument Detection of Microbial Essential Carbon and Nitrogen

Chemical analyses of Mars soils and sediments from previous landed missions have demonstrated that Mars surface materials possessed major (e.g., P, K, Ca, Mg, S) and minor (e.g., Fe, Mn, Zn, Ni, Cl) elements essential to support microbial life. However, the detection of microbial essential organic-carbon (C) and nitrate have been more elusive until the Mars Science Laboratory (MSL) rover mission. Nitrate and organic-C in Gale Crater, Mars have been detected by the Sample Analysis at Mars (SAM) instrument onboard the MSL Curiosity rover. Eolian fines and drilled sedimentary rock samples were heated in the SAM oven from approximately 30 to 860 degrees Centigrade where evolved gases (e.g., nitrous oxide (NO) and CO2) were released and analyzed by SAM’s quadrupole mass spectrometer (MS). The temperatures of evolved NO was assigned to nitrate while evolved CO2 was assigned to organic-C and carbonate. The CO2 releases in several samples occurred below 450 degrees Centigrade suggesting organic-C dominated in those samples. As much as 7 micromoles NO3-N per gram and 200 micromoles CO2-C per gram have been detected in the Gale Crater materials. These N and C levels coupled with assumed microbial biomass (9 x 10 (sup -7) micrograms per cell) C (0.5 micrograms C per micrograms cell) and N (0.14 micrograms N per micrograms cell) requirements, suggests that less than 1 percent and less than 10 percent of Gale Crater C and N, respectively, would be required if available, to accommodate biomass requirements of 1 by 10 (sup 5) cells per gram sediment. While nitrogen is the limiting nutrient, the potential exists that sufficient N and organic-C were present to support limited heterotrophic microbial populations that may have existed on ancient Mars.

Sutter, B.↗

Using the Potassium-Argon Laser Experiment (KArLE) to Date Ancient, Low-K Chondritic Meteorites

Several laboratories have been investigating the feasibility of in situ K-Ar dating for use in future landing planetary missions. One drawback of these laboratory demonstrations is the insufficient analogy of the analyzed analog samples with expected future targets. We present the results obtained using the K-Ar laser experiment (KArLE) on two old and K-poor chondritic samples, Pułtusk and Hvittis, as better lunar analogs. The KArLE instrument uses laser ablation to vaporize rock samples and quantifies K content by laser-induced breakdown spectroscopy (LIBS), Ar by quadrupole mass spectrometry (QMS), and ablated mass by laser profilometry. We performed 64 laser ablations on the chondrites to measure spots with a range of K 2 O and Ar content and used the data to construct isochrons to determine the chondrite formation age. The KArLE isochron ages on Pułtusk and Hvittis are 5059 ± 892 Ma and 4721 ± 793 Ma, respectively, which is within the uncertainty of published reference ages, and interpreted as the age of their formation. The uncertainty (2σ) on the KArLE ages obtained in this study is better than 20% (18% for Pułtusk and 17% for Hvittis). The precision, which compares our obtained ages to the reference ages, is also better than 20% (11% for Pułtusk and 4% for Hvittis). These results are encouraging for understanding the limits of this technique to measure ancient planetary samples and for guiding future improvements to the instrument.

Fanny Cattani↗

Nuclear chemistry of returned lunar samples: Nuclide analysis by gamma-ray spectrometry

Primordial and cosmogenic radionuclide concentrations are determined nondestructively by gamma-ray spectrometry in soil and rock samples from the returned Apollo 17 sample collection from Taurus-Littrow and Descartes. Geochemical evidence in support of field geology speculation concerning layering of the subfloor basalt flows is demonstrated along with a possible correlation of magmatic fractionation of K/U as a function of depth. The pattern of radionuclide concentrations observed in these samples is distinct due to proton bombardment by the intense solar flares of August 4-9, 1972. Such radionuclide determinations are used in determining lunar sample orientation and characterizing solar flare activity.

Okelley, G. D.↗

Documentation of Apollo 15 samples

A catalog is presented of the documentation of Apollo 15 samples using photographs and verbal descriptions returned from the lunar surface. Almost all of the Apollo 15 samples were correlated with lunar surface photographs, descriptions, and traverse locations. Where possible, the lunar orientations of rock samples were reconstructed in the lunar receiving laboratory, using a collimated light source to reproduce illumination and shadow characteristics of the same samples shown in lunar photographs. In several cases, samples were not recognized in lunar surface photographs, and their approximate locations are known only by association with numbered sample bags used during their collection. Tables, photographs, and maps included in this report are designed to aid in the understanding of the lunar setting of the Apollo 15 samples.

Sutton, R. L.↗

Valles Marineris, Mars: An optimum science-sample site

The Valles Marineris troughs offer an opportunity to sample rocks that reflect various ages and compositions, giving insight into important processes on Mars. Most of the samples would be located within reasonable proximity and could be easily reached by rovers or balloons. Although landing a spacecraft on the floor of the Valles Marineris may be too dangerous for the first sample-return mission to Mars, the scientific rewards would be so great that such a landing should be considered for later flights.

Lucchitta, B. K.↗

The Chemistry and Mineralogy (CheMin) X-Ray Diffractometer on the MSL Curiosity Rover: A Decade of Mineralogy From Gale Crater, Mars

For more than a decade, the CheMin X-ray diffraction instrument on the Mars Science Laboratory rover Curiosity has been returning definitive and quantitative mineralogical and mineral-chemistry data from ~3.5-billion-year-old (Ga) sediments in Gale crater, Mars. To date, 40 drilled rock samples and 3 scooped soil samples have been analyzed during the rover’s 30+ km transit. These samples document the mineralogy of over 800 meters of flat-lying fluvial, lacustrine and aeolian sedimentary rocks that comprise the lower strata of the central mound of Gale crater (Aeolis Mons; informally known as Mt. Sharp) and the surrounding plains (Aeolis Palus, informally known as the Bradbury Rise). The principal mineralogy of the sedimentary rocks is basaltic, with evidence of early and late-stage diagenetic overprinting. The rocks in many cases preserve much of their primary mineralogy and sedimentary features, suggesting that they were never strongly heated or deformed. Using aeolian soil composition as a proxy for the composition of the deposited and lithified sediment, it appears that in many cases diagenetic changes observed are principally isochemical. Exceptions to this trend include secondary nodules, calcium sulfate veining, and rare Si-rich alteration halos. A surprising and yet poorly understood observation is that nearly all the ~3.5 Ga sedimentary rocks analyzed to date contain 15-70 wt.% of X-ray amorphous material. Over-all, this >800-meter section of sedimentary rock explored in lower Mt. Sharp documents a perennial shallow lake environment grading upward into alternating lacustrine/fluvial and aeolian environments, many of which would have been habitable to microbial life.

Mars↗

Magnetochemistry of the Apollo landing sites

A coherent magnetochemical picture of lunar samples is presented which was determined from a synthesis of available magnetic-property data and corresponding chemical and petrographic data for soils and rock samples collected at the Apollo landing sites. The magnetic properties of the samples are correlated with Al/Si ratio as well as with telescope spectral reflectivity curves, and magnetochemical diagrams based on composition-sensitive magnetic parameters describing the Fe metal and Fe(2+) contents are used to classify the samples. It is shown that the relative metal-fraction size distribution and magnetic stability for different rock types and soils of varying Al/Si values are reflected in a plot of the ratio of saturation isothermal remanence to saturation magnetization vs the ratio of remanent coercive force to coercive force. It is concluded that all the Apollo landing sites have distinct telescope curves correlated with petrology, chemistry, Al/Si values, and magnetic properties. The established correlations suggest the possibility of estimating the magnetic properties of the regolith from remote-sensing observations.

Wasilewski, P. J.↗

Nanoscale Compositional Relations in Lunar Rock Patina: Deciphering Sources for Patina Components on an Apollo 17 Station 6 Boulder

Space weathering on the Moon and other airless bodies modifies the surfaces of regolith grains as well as the space-exposed surfaces of larger rocks and boulders. As space weathering witness plates, rocks and boulders are distinguished from regolith grains based on their ability to persist as physically intact substrates over longer time scales before being disaggregated by impact processes. Because lunar surfaces, including exposed rocks, quickly develop an optically thick layer of patina, it is important to understand the compositional relationship between patinas and their underlying rock substrates, particularly to support remote-sensing of rocky lunar terrains. Based on analytical TEM techniques, supported by focused ion beam (FIB) cross-sectioning, we have begun to systematize the multi-layer microstructural complexity of patinas on rock samples with a range of space exposure histories. Our on-going work has particularly focused on lunar rock 76015, both because it has a long (approx. 22 my) exposure history, and because its surface was exposed to patina development approximately 1 m off the regolith surface on a boulder in the Apollo 17 Station 6 boulder field. Potential sources for the 76015 patina therefore include impact-melted and vaporized material derived from the local rock substrate, as well as from the mix of large boulders and regolith in the Station 6 area. While similar, there are differences in the mineralogy and chemistry of the rocks and regolith at Station 6. We were interested to see if these, or other sources, could be distinguished in the average composition, as well as the compositional nanostratigraphy of the 76015 patina. To date we have acquired a total of 9 TEM FIB cross-sections from the 76015 patina, giving us reasonable confidence of being able to arrive at an integrated average for the patina major element composition based on analytical TEM methods.

Christoffersen, R.↗

Silica Dissolution and Precipitation in Galciated Volcanic Environments and Implications for Mars

The surface of Mars exhibits strong evidence for a widespread and long-lived cryosphere. Observations of the surface have identified phases produced by water-rock interactions, but the contribution of glaciers to the observed alteration mineralogy is unclear. To characterize the chemical alteration expected on an icy early Mars, we collected water and rock samples from terrestrial glaciated volcanics. We related geochemical measurements of meltwater to the mineralogy and chemistry of proglacial rock coatings. In these terrains, water is dominated by dissolved silica relative to other dissolved cations, particularly at mafic sites. Rock coatings associated with glacial striations on mafic boulders include a silica-rich component, indicating that silica precipitation is occurring in the subglacial environment. We propose that glacial alteration of volcanic bedrock is dominated by a combination of high rates of silica dissolution and precipitation of opaline silica. On Mars, cryosphere-driven chemical weathering could be the origin of observed silica-enriched phases.

Rutledge, A. M.↗

Sulfur abundances and distributions in the valley of Taurus-Littrow

Total sulfur abundances have been determined for 36 Apollo 17 soil, breccia and crystalline rock samples. Sulfur concentrations range from 550 to 1300 micrograms S/g for soil samples, with the orange soil containing the lowest amount of sulfur. Noritic breccias contain between 720 and 950 micrograms S/g, while the anorthositic rocks have sulfur contents of 270 and 368 micrograms S/g. The dunite 72415 contained the lowest sulfur content (44 micrograms S/g) of any Apollo 17 sample studied. Apollo 17 basalts have unusually high sulfur contents (1580-2770 micrograms S/g) as compared to Apollo 12 and 15 basalts and terrestrial basalts. Sulfur abundances for the Apollo 17 basalts are almost identical to those from Apollo 11 basalts. A negative correlation between percent metallic iron and total sulfur for the Apollo 17 and 15 basalts was found and suggests that a portion of the metallic iron in lunar basalts may result from desulfuration of the melt prior to crystallization from the lunar magma.

Gibson, E. K., Jr.↗

Lunar 'dunite', 'pyroxenite' and 'anorthosite.'

Photomicrographic study of 200 thin sections of Apollo 14 rock samples suggests that these monomineralic aggregates are recrystallized single-mineral grains. It is contended, therefore, that the source rocks are not properly characterized by igneous rock names, being more moderately coarse-grained gabbroic rather than ultramafic rocks.

Wilshire, H. G.↗

Telerobotic field geologist - Preliminary results of a feasibility study

Results of three laboratory studies conducted to explore the feasibility of developing a telerobot to perform planetary field geology are presented. A total of 72 college students attempted to match each of 15 geologic rock samples viewed either directly or on a TV screen with its matched pair contained in a matrix of 24 rocks which they viewed directly. The first study showed that rocks viewed on TV could be matched at levels well above chance, but significantly less than by direct view. Performance under remote view was improved by adding color and by magnifying the TV image. The second study showed a large decrease in performance when viewing a miniature LCK monitor as compared to a 19-in. CRT monitor of higher resolution. In the third study performance using the 2.9-in. LCK monitor showed only insignificant increases when images were presented in 3D view or when the rock was moved. It is suggested that it is feasible to conduct geologic observations with telerobots, and the critical role that image quality plays in determining performance is demonstrated.

Cole, Robert E.↗

Astrobiological Potential of Rocks Acquired By the Perseverance Rover in Jezero Crater, Mars

The scientific community has prioritized the return of Martian rock samples with known geologic context for more than a decade (Beatty et al., 2019). Thus, the main objectives of the Perseverance rover mission on Mars include identifying past habitable environments, collecting rocks that are likely to preserve biosignaturesand using the rover’s instruments to look for potential biosignatures in these rocks (Farley et al., 2020). Here, we present an overview of the bedrock samples collected bythe Perseverance rover in Jezero crater to date and discuss the potential of the sampled materials to address astrobiological questions upon sample return to Earth.

Mars 2020↗

Planetary rock corer and drill concepts

Several planetary rock corers and drill design concepts have been developed for obtaining subsurface rock samples in future planetary explorations. Tools are designed for unmanned space vehicles. Two devices are rotary impact multiple chisel trepan rock corer and hole drilling tool.

Imus, R. E.↗