Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rocket Vehicle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Users' instructions for the NASA/MSFC cloud-rise preprocessor program, version 6, and the NASA/MSFC multilayer diffusion program, version 6: Research version for Univac 1108 system

The cloud-rise preprocessor and multilayer diffusion computer programs were used by NASA in predicting concentrations and dosages downwind from normal and abnormal launches of rocket vehicles. These programs incorporated: (1) the latest data for the heat content and chemistry of rocket exhaust clouds; (2) provision for the automated calculation of surface water pH due to deposition of HCl from precipitation scavenging; (3) provision for automated calculation of concentration and dosage parameters at any level within the vertical grounds for which meteorological inputs have been specified; and (4) provision for execution of multiple cases of meteorological data. Procedures used to automatically calculate wind direction shear in a layer were updated.

Bjorklund, J. R.↗
NASA NTRS1974

Performance capability of laser-powered launch vehicles using vertical ascent trajectories

The use of a ground-based high-power laser source to power a vertically launched rocket vehicle is investigated. By using a vertical ascent trajectory, only a single laser source is required. The vertical ascent mode is not applicable to earth orbit destinations but is applicable to missions beyond earth escape. Performance and trajectory characteristics are examined for vertical trajectories to earth escape and solar escape (which may be of interest in the future for radioactive waste disposal). Specific impulse values from 2000 to 5000 seconds are considered. With these values, a single-stage vehicle can deliver payloads to earth escape and beyond, but extremely high power sources (gigawatts) are required.

Spurlock, O. F.↗
NASA NTRS1999

An Overview of the NASA Sounding Rockets and Balloon Programs

The U.S. National Aeronautics and Space Administration (NASA) Sounding Rockets and Balloon Programs conduct a combined total of approximately fifty to sixty missions per year in support of the NASA scientific community. These missions are provided in support of investigations sponsored by NASA'S Offices of Space Science, Life and Microgravity Sciences & Applications, and Earth Science. The Goddard Space Flight Center has management and implementation responsibility for these programs. The NASA Sounding Rockets Program has continued to su,pport the science community by integrating their experiments into the sounding rocket payload and providing the rocket vehicle and launch operations necessary to provide the altitude/time required obtain the science objectives. The sounding rockets continue to provide a cost-effective way to make in situ observations from 50 to 1500 km in the near-earth environment and to uniquely cover the altitude regime between 50 km and 130 km above the Earth's surface, which is physically inaccessible to either balloons or satellites. A new architecture for providing this support has been introduced this year with the establishment of the NASA Sounding Rockets Contract. The Program has continued to introduce improvements into their operations and ground and flight systems. An overview of the NASA Sounding Rockets Program with special emphasis on the new support contract will be presented. The NASA Balloon Program continues to make advancements and developments in its capabilities for support of the scientific ballooning community. Long duration balloon (LDB) is a prominent aspect of the program with two campaigns scheduled for this calendar year. Two flights are scheduled in the Northern Hemisphere from Fairbanks, Alaska, in June and two flights are scheduled from McMurdo, Antarctica, in the Southern Hemisphere in December. The comprehensive balloon research and development (R&D) effort has continued with advances being made across the spectrum of balloon related disciplines. As a result of these technology advancements a new ultra long duration balloon project (ULDB) for the development of a 100- day duration balloon capability has been initiated. The ULDB will rely upon new balloon materials and designs to accomplish its goals. The Program has also continued to introduce new technology and improvements into flights systems, ground systems and operational techniques. An overview of the various aspects of the NASA Balloon Program will be presented.

Flowers, Bobby J.↗
NASA NTRS1987

Shuttle II

This paper presents a status report on the study of a next-generation manned launch system, called Shuttle II, being conducted at the NASA Langley Research Center. Underlying reasons for considering such a system include the need for low-cost, safe, and reliable manned access to space. System and operational characteristics for a Shuttle II vehicle are presented. The need for fully reusable launch systems with radically simpler ground and flight operations is stated to be critical in reducing launch costs. Advancing technologies have a major impact on the choice of vehicle concepts. For a near-term level of technology, a two-stage vertical-takeoff rocket vehicle has been selected for further in-depth Shuttle II studies. The role of the Shuttle II vehicle in a proposed space transportation system, which includes heavy lift and Space Shuttle complementary manned systems, is discussed.

Talay, T. A.↗
NASA NTRS1972

Perturbation guidance for minimum time flight paths of spacecraft.

The problem of transferring a rocket vehicle from a given circular orbit to a larger coplanar circular orbit in minimum time, using a constant low-thrust rocket engine, is considered. Parameters are chosen to correspond to a transfer from the earth's orbit in heliocentric space to the orbit of Mars. A path satisfying the first order necessary conditions of variational calculus is shown to be locally minimizing by application of a set of second order conditions. A physical explanation is offered to justify the retrothrust period occurring during the flight. A neighboring optimum feedback control law, based on estimated time-to-go, is applied to this problem. State variable and terminal constraint feedback gains are calculated while one of the second order conditions, involving the backward integration of a matrix Riccati equation, is being tested.

Wood, L. J.↗
NASA NTRS1982

Computer program for prediction of fuel consumption statistical data for an upper stage three-axes stabilized on-off control system

A FORTRAN coded computer program and method to predict the reaction control fuel consumption statistics for a three axis stabilized rocket vehicle upper stage is described. A Monte Carlo approach is used which is more efficient by using closed form estimates of impulses. The effects of rocket motor thrust misalignment, static unbalance, aerodynamic disturbances, and deviations in trajectory, mass properties and control system characteristics are included. This routine can be applied to many types of on-off reaction controlled vehicles. The pseudorandom number generation and statistical analyses subroutines including the output histograms can be used for other Monte Carlo analyses problems.

Source record↗
NASA NTRS2000

Launch Vehicle Performance for Bipropellant Propulsion Using Atomic Propellants With Oxygen

Atomic propellants for bipropellant launch vehicles using atomic boron, carbon, and hydrogen were analyzed. The gross liftoff weights (GLOW) and dry masses of the vehicles were estimated, and the 'best' design points for atomic propellants were identified. Engine performance was estimated for a wide range of oxidizer to fuel (O/F) ratios, atom loadings in the solid hydrogen particles, and amounts of helium carrier fluid. Rocket vehicle GLOW was minimized by operating at an O/F ratio of 1.0 to 3.0 for the atomic boron and carbon cases. For the atomic hydrogen cases, a minimum GLOW occurred when using the fuel as a monopropellant (O/F = 0.0). The atomic vehicle dry masses are also presented, and these data exhibit minimum values at the same or similar O/F ratios as those for the vehicle GLOW. A technology assessment of atomic propellants has shown that atomic boron and carbon rocket analyses are considered to be much more near term options than the atomic hydrogen rockets. The technology for storing atomic boron and carbon has shown significant progress, while atomic hydrogen is not able to be stored at the high densities needed for effective propulsion. The GLOW and dry mass data can be used to estimate the cost of future vehicles and their atomic propellant production facilities. The lower the propellant's mass, the lower the overall investment for the specially manufactured atomic propellants.

Palaszewski, Bryan↗
NASA NTRS1982

Black Brant X - The low cost development of an advanced sounding rocket system

During the late 1970s it became more and more apparent that an investigation of the regions extending above the earth's dayside polar cusp is very important from a scientific point of view. The feasibility of a mission for implementing such an investigation was studied. It was found that a sounding rocket vehicle having the necessary payload throw capability and the required low trajectory dispersion did not exist within the NASA inventory. It was, therefore, decided to develop a suitable sounding rocket, the Black Brant X (BBX), in a cooperative effort including NASA, the Canadian National Research Council, and a number of aerospace companies. Attention is given to a BBX vehicle description, BBX flight results, and the BBX flight capabilities

Lane, J. H.↗
NASA NTRS1986

Application of boost guidance to NASA sounding rocket launch operations at the White Sands Missile Range

This paper addresses the unique problems associated with launching the Black Brant V, VIII, and IX sounding rocket vehicles at White Sands Missile Range (WSMR) and the significance of the introduction of the S19 to the NASA Goddard Space Flight Center Wallops Flight Facility sounding rocket program in terms of launch flexibility, improved impact dispersion, higher flight reliability, and reduced program costs. This paper also discusses salient flight results from NASA 36.011UL (the first S19 guided Black Brant launched at WSMR) and the NASA Comet Halley missions (36.010DL and 36.017DL).

Montag, W. H.↗
NASA NTRS1966

Rocket Engine Clustering and Vehicle Integration as Influenced by Base Thermal Environments

Clustered rocket engines create severe thermal environments in the base of rocket vehicle stages. Boosters burning hydrocarbon fuels experience severe radiant heating early in flight; as the plumes interact at higher altitudes, convective heating becomes significant. For hydrogen-fueled upper stages radiation is not important, but convective heating is severe during the entire stage operation. Predicted and measured heating rates are discussed. The base region thermal environments of stages with clustered engines present a variety of engine/vehicle interaction problems. Components and structures in the base region, including the rocket engines, cannot survive radiant and convective heating from engine exhausts without such remedies as protective insulation, shielding, air-scooping, and proper disposal of the fuel-rich turbine exhaust gases. Different thermal protection concepts evolve for booster and upper stages due to the differences in ground test and flight environments. Solutions to the engine/vehicle interaction and design integration problems are described.

Hopson, George D.↗
NASA NTRS1975

NASA/MSFC multilayer diffusion models and computer programs, version 5

The transport and diffusion models and algorithms developed for use by NASA in predicting concentrations and dosages downwind from normal and abnormal launches of rocket vehicles are described along with the associated computer programs for use in performing the calculations. Topics discussed include: the mathematical specifications and procedures used in the Preprocessor Program to calculate rocket exhaust cloud rise, cloud dimensions, and other input parameters to the transport and diffusion models; the revised mathematical specifications for the Multilayer Diffusion Models; users' instructions for implementing the Preprocessor and Multilayer Diffusion Models Programs; and worked example problems illustrating the use of the models and computer programs.

Dumbauld, R. K.↗
NASA NTRS1968

Nuclear Physics Made Very, Very Easy

The fundamental approach to nuclear physics was prepared to introduce basic reactor principles to various groups of non-nuclear technical personnel associated with NERVA Test Operations. NERVA Test Operations functions as the field test group for the Nuclear Rocket Engine Program. Nuclear Engine for Rocket Vehicle Application (NERVA) program is the combined efforts of Aerojet-General Corporation as prime contractor, and Westinghouse Astronuclear Laboratory as the major subcontractor, for the assembly and testing of nuclear rocket engines. Development of the NERVA Program is under the direction of the Space Nuclear Propulsion Office, a joint agency of the U.S. Atomic Energy Commission and the National Aeronautics and Space Administration.

Hanlen, D. F.↗
NASA NTRS2012

Peregrine 100-km Sounding Rocket Project

The Peregrine Sounding Rocket Program is a joint basic research program of NASA Ames Research Center, NASA Wallops, Stanford University, and the Space Propulsion Group, Inc. (SPG). The goal is to determine the applicability of this technology to a small launch system. The approach is to design, build, and fly a stable, efficient liquefying fuel hybrid rocket vehicle to an altitude of 100 km. The program was kicked off in October of 2006 and has seen considerable progress in the subsequent 18 months. This research group began studying liquifying hybrid rocket fuel technology more than a decade ago. The overall goal of the research was to gain a better understanding of the fundamental physics of the liquid layer entrainment process responsible for the large increase in regression rate observed in these fuels, and to demonstrate the effect of increased regression rate on hybrid rocket motor performance. At the time of this reporting, more than 400 motor tests were conducted with a variety of oxidizers (N2O, GOx, LOx) at ever increasing scales with thrust levels from 5 to over 15,000 pounds (22 N to over 66 kN) in order to move this technology from the laboratory to practical applications. The Peregrine program is the natural next step in this development. A number of small sounding rockets with diameters of 3, 4, and 6 in. (7.6, 10.2, and 15.2 cm) have been flown, but Peregrine at a diameter of 15 in. (38.1 cm) and 14,000-lb (62.3-kN) thrust is by far the largest system ever attempted and will be one of the largest hybrids ever flown. Successful Peregrine flights will set the stage for a wide range of applications of this technology.

Zilliac, Gregory↗
NASA NTRS1975

Effluent sampling of Titan 3 C vehicle exhaust

Downwind in situ ground-level measurements of the exhaust from a Titan 3 C launch vehicle were made during a normal launch. The measurement activity was conducted as part of an overall program to obtain field data for comparison with the multilayer dispersion model currently being used to predict the behavior of rocket vehicle exhaust clouds. All measurements were confined to land, ranging from the launch pad to approximately 2 kilometers downwind from the pad. Measurement systems included detectors for hydrogen chloride (HCl), carbon dioxide (CO2), and particulates (Al2O3). Airborne and ground-based optical systems were employed to monitor exhaust cloud rise, growth, and movement. These measurement systems, located along the ground track (45 deg azimuth from the launch pad) of the exhaust cloud, showed no effluents attributable to the launch. Some hydrogen chloride and aluminum oxide were detected in the surface wind direction (15 deg azimuth) from the pad. Comparisons with the model were made in three areas: (1) assumption of cloud geometry at stabilization; (2) prediction of cloud stabilization altitude; and (3) prediction of the path of cloud travel. In addition, the importance of elemental analyses of the particulate samples is illustrated.

Gregory, G. L.↗