Search NASA⌕ Search

SEARCH · Search NASA

Results for “SAR Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Real-time digital processing of SAR data

Current SAR data processing techniques for spaceborne SAR systems utilize commercial equipment to carry the computation load. For a data set such as SEASAT, the resulting throughput rate is two to three orders of magnitude slower than real time. Such rates impede the progress of scientific investigations and preclude the potential for any practical operational SAR mission. It is suggested that a set of special-purpose hardware could be designed for efficient SAR data processing so that real time rates are both practical and affordable.

Bickwell, T. J.↗
NASA NTRS2009

SAR Imagery Applied to the Monitoring of Hyper-Saline Deposits: Death Valley Example (CA)

The present study aims at understanding the influence of salinity on the dielectric constant of soils and then on the backscattering coeff cients recorded by airborne/spaceborne SAR systems. Based on dielectric measurements performed over hyper-saline deposits in Death Valley (CA), as well as laboratory electromagnetic characterization of salts and water mixtures, we used the dielectric constants as input parameters of analytical IEM simulations to model both the amplitude and phase behaviors of SAR signal at C, and L-bands. Our analytical simulations allow to reproduce specif c copolar signatures recorded in SAR data, corresponding to the Cottonball Basin saltpan. We also propose the copolar backscattering ratio and phase difference as indicators of moistened and salt-affected soils. More precisely, we show that these copolar indicators should allow to monitor the seasonal variations of the dielectric properties of saline deposits.

evaporites↗
NASA NTRS1986

SIR-C, the next generation spaceborne SAR

SIR-C represents a significant advance in spaceborne SAR system capabilities. The design approach is responsive to the requirements identified by the Science Steering Committee. This multimode feature of the sensor will provide science investigators with new dimensions in acquiring and interpreting scientific data. The flexibility of the SIR-C design will provide a core instrument which will meet the needs of SAR data users into the 1990's and serve as a foundation for ultimate incorporation into the EOS platform.

Caro, E. R.↗
NASA NTRS2016

Development of RFI Mitigation Techniques with Digital Beamforming

Remote sensing radars with longer wavelengths penetrate deeper into the observed scene and are more suitable for the scientific observation of ice sheets or vegetation. Therefore, SAR systems are moving to lower frequencies like L- or P-band. However, as the frequency spectrum is a limited resource, this means that the occupied frequency band has to be shared with existing users. These users can have serious impact on the imaging quality. Radio frequency interference (RFI) that arrives at the antenna together with the SAR backscatter is causing a drop of the signal-to-noise ratio. Despite the high processing gain of the SAR signal, artifacts can appear in the image if the RFI is strong enough. This can lead to a corruption of the acquired data and make it unsuitable for scientific purposes. Hence, the investigation of methods for RFI mitigation is critical to the performance of radar missions and to ensure they meet their main task.

Digital Beamforming↗
NASA NTRS1979

Preliminary results of SAR soil moisture experiment, November 1975

The experiment was performed using the Environmental Research Institute of Michigan's (ERIM) dual-frequency and dual-polarization side-looking SAR system on board a C-46 aircraft. For each frequency, horizontally polarized pulses were transmitted and both horizontally and vertically polarized return signals were recorded on the signal film simultaneously. The test sites were located in St. Charles, Missouri; Centralia, Missouri; and Lafayette, Indiana. Each test site was a 4.83 km by 8.05 km (3 mile by 5 mile) rectangular strip of terrain. Concurrent with SAR overflight, ground soil samples of 0-to-2.5 cm and 0-to-15 cm layers were collected for soil moisture estimation. The surface features were also noted. Hard-copy image films and the digital data produced via optical processing of the signal films are analyzed in this report to study the relationship of radar backscatter to the moisture content and the surface roughness. Many difficulties associated with processing and analysis of the SAR imagery are noted. In particular, major uncertainty in the quantitative analysis appeared due to the difficulty of quality reproduction of digital data from the signal films.

Choudhury, B. J.↗
NASA NTRS1995

(abstract) Recent Developments in Active Microwave Systems at JPL

This paper provides an overview of some of the recent developments in active microwave systems at JPL. The first section summarizes the engineering and scientific results that were obtained from the two recent flights of the Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SIR-C/X-SAR) on the Shuttle Endeavor. Specific examples of the applications of these data to various scientific disciplines will be discussed. The second section of the paper describes the recent progress in the development of an interferometric SAR system for high-resolution digital topography mapping. Examples of measurements from this technique over areas with earthquakes will be shown. The final section of the paper addresses development of meteorological radars for rain and cloud measurements. The design of an airborne rain mapping radar that was developed to support the Tropical Rain Measuring Mission is summarized. The technical design challenges for this high-frequency radar system will be described.

radar↗
NASA NTRS1993

International collaboration in SAR ground data systems

A set of considerations that are pertinent to future international cooperation in the area of synthetic aperture radar (SAR) ground data systems are presented. The considerations are as follows: (1) success of future spaceborne SAR missions will require multi-agency and/or multi-national collaboration; (2) ground processing is typically performed by each agency for their user base; (3) international standards are required to achieve a uniform data product independent of the processing center; (4) to reduce the aggregate cost of the ground data systems, collaboration is required in design and development; (5) effective utilization of the data by an international user community; (6) commercialization of data products; and (7) security of data systems.

Curlander, John C.↗
NASA NTRS1983

Shuttle Imaging Radar-A information and data availability

The performance characteristics of the Shuttle Imaging Radar (SIR-A), carried aloft on the STS-2 flight, are described and the results of its initial use are evaluated. The SIR-A is an SAR system operated at 1278 MHz (L-band), i.e., a wavelength of 23 cm. A seven panel antenna 9.4 m long was used, and scans were performed at a 50 deg angle of incidence to the center of a 50 km swath. Resolution is 40 m, and imagery is generated on a scale of 1:500,000. Sample images of a Brasilian island and the California coast are provided. Comparisons of the SIR-A imagery with Seasat SAR composite imagery demonstrate that the SIR-A is more sensitive to local roughness and only slightly dependent on terrain slope.

Holmes, A. L.↗
NASA NTRS2002

Dual-low frequency radar for soil moisture under vegetation at at-depth

To address a key science research topic for the global water and energy cycle, namely measuring soil moisture under substantial vegetation canopies and to useful depths, we have developed a concept for a synthetic aperture radar (SAR) system operating simultaneously at UHF and VHF frequencies. We are currently prototyping key technology items that enable this concept under the NASA Earth Science Technology Office (ESTO) Instrument Incubator Program (IIP). This presentation describes the technological challenges and innovations we are addressing to enable the implementation of this instrument and its integration into a future Earth-orbiting mission.

soil moisture low-frequency SAR deployable mech du↗
NASA NTRS1976

Use of a multi-look unfocussed SAR processor on spacecraft

Two methods of processing signals from a multi-look unfocussed synthetic-aperture radar are considered. A saving in the processor complexity is achieved in comparison to a fully focussed SAR system at the expense of slightly greater clutter levels and poorer along-track resolution. In addition, lower power consumption enables the unfocussed processor to increase the number of looks to compensate in part for the reduced resolution.

Fong, R. K. T.↗
NASA NTRS1978

A significant post-launch calibration experiment for the SEASAT-A SAR

A technique for periodically monitoring the impulse response function of the SEASAT-A synthetic aperture radar is outlined that yields most of the significant contributors to the overall instrument transfer function. The essential measurement involves exciting the total SAR system at L-band with a strong point source scatterer, receiving via the normal S-band analog data link, and finally sampling and processing only a small subset of data in the immediate vicinity of the strong point source.

Beal, R. C.↗
NASA NTRS1978

Effects of range bin shape and Doppler filter response in a digital SAR data processor

In calibrating the backscatter coefficient obtained with an imaging synthetic aperture radar (SAR) system to determine absolute values of radar cross-section and reflectivity it is common practice to use a target of known radar cross-section placed within the scene. A corner reflector acts as a point target, but the return from it may not be centered in the resolution cell. It is important, for accurate calibration, to perform straddling corrections based on the range bin and Doppler filter response curves.

Griffin, C. R.↗
NASA NTRS1977

Fisheries imaging radar surveillance test /FIRST/ - Bering Sea test

A joint NOAA, U.S. Coast Guard and NASA program is being conducted to determine if a synthetic aperture radar (SAR) system, such as planned for NASA's SEASAT, can be useful in monitoring fishing vessels within the newly established 200-mile fishing limit. As part of this program, data gathering field operations were conducted over concentrations of foreign fishing vessels in the Bering Sea off Alaska in April 1976. The Jet Propulsion Laboratory developed synthetic aperture L-band radar which was flown aboard the NASA Convair 990 aircraft, with a Coast Guard cutter and C-130 aircraft simultaneously gathering data to provide both radar imagery and sea truth information on the vessels being imaged. Results indicate that synthetic aperture radar systems have potential for all weather detection, enumeration and classification of fishing vessels.

Woods, E. G.↗
NASA NTRS1978

Waveguide-excited slot arrays for synthetic array radar applications

The basic design considerations for waveguide slottery arrays are reviewed, with emphasis on those design requirements that are most significant to both airborne and spaceborne synthetic array radar (SAR) systems. As an illustration of both design procedures and performance capability of slotted waveguide planar arrays, an L-band planar array was designed, fabricated, and tested. This array has an aperture approximately one meter wide by two meters high and was designed to be a typical submodule of a larger antenna. Measurements of radiation patterns, gain, and VSWR were recorded and are presented, together with the performance characteristics predicted on the basis of theoretical analysis.

Bostrom, D. E.↗
NASA NTRS1979

Weighting in digital synthetic aperture radar processing

Weighting is employed in synthetic aperture radar (SAR) processing to reduce the sidelobe response at the expense of peak center response height and mainlobe resolution. The weighting effectiveness in digital processing depends not only on the choice of weighting function, but on the fineness of sampling and quantization, on the time bandwidth product, on the quadratic phase error, and on the azimuth antenna pattern. The results of simulations conducted to uncover the effect of these parameters on azimuth weighting effectiveness are presented. In particular, it is shown that multilook capabilities of future SAR systems may obviate the need for consideration of the antenna pattern, and that azimuth time-bandwidth products of over 200 are probably required before the digital results begin to approach the ideal results.

Dicenzo, A.↗
NASA NTRS1980

The use of radar and LANDSAT data for mineral and petroleum exploration in the Los Andes region, Venezuela

A geological study of a 27,500 sq km area in the Los Andes region of northwestern Venezuela was performed which employed both X-band radar mosaics and computer processed Landsat images. The 3.12 cm wavelength radar data were collected with horizontal-horizontal polarization and 10 meter spatial resolution by an Aeroservices SAR system at an altitude of 12,000 meters. The radar images increased the number of observable suspected fractures by 27 percent over what could be mapped by LANDSAT alone, owing mostly to the cloud cover penetration capabilities of radar. The approximate eight fold greater spatial resolution of the radar images made possible the identification of shorter, narrower fractures than could be detected with LANDSAT data alone, resulting in the discovery of a low relief anticline that could not be observed in LANDSAT data. Exploration targets for petroleum, copper, and uranium were identified for further geophysical work.

Vincent, R. K.↗
NASA NTRS1981

Optimal spatial filtering and transfer function for SAR ocean wave spectra

The impulse response of the SAR system is not a delta function and the spectra represent the product of the underlying image spectrum with the transform of the impulse response which must be removed. A digitally computed spectrum of SEASAT imagery of the Atlantic Ocean east of Cape Hatteras was smoothed with a 5 x 5 convolution filter and the trend was sampled in a direction normal to the predominant wave direction. This yielded a transform of a noise-like process. The smoothed value of this trend is the transform of the impulse response. This trend is fit with either a second- or fourth-order polynomial which is then used to correct the entire spectrum. A 16 x 16 smoothing of the spectrum shows the presence of two distinct swells. Correction of the effects of speckle is effected by the subtraction of a bias from the spectrum.

Beal, R. C.↗
NASA NTRS1981

Radar imagery for forest cover mapping

Dual-polarized, X-band Synthetic Aperture Radar (SAR) imagery was obtained from an altitude of 60,000 feet over a test area near Camden, SC on June 30, 1980. The objective of this study was to determine, qualitatively, the value of the SAR imagery for identifying various forest cover types. In analyzing the HH and HV polarization images, particular attention was given to the tonal and textural characteristics of the cover types involved. The analysis of the dual-polarized SAR imagery has shown that certain forest cover features are more easily identified in one polarization than the other, while some features look very similar in both polarizations. In general, the results for this data set have shown that the overall tonal contrast between features was greater on the HH image. Neither polarization was consistently better for identifying the various forest cover types examined. These results suggest the usefulness of a dual-polarized SAR system for mapping forest cover.

Knowlton, D. J.↗