Search NASA⌕ Search

SEARCH · Search NASA

Results for “SHOCK WAVE GENERATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Fast ignition inertial fusion energy using laser-driven ion beams

Ion fast ignition (IFI), or fusion fast ignition initiated by a laser-driven ion beam, is a promising path to high-gain inertial fusion energy (IFE). In IFI, cold, dense deuterium-tritium (DT) fuel is first assembled using lasers or pulsed power drivers. Then, a high-power ion beam is focused onto a small volume within the fuel (the hot spot), heating the fuel rapidly to conditions where fusion ignition takes place. Fusion burn in this hot spot propagates to the fuel surrounding the hot spot, leading to burnup of a significant fraction of this fuel and the possibility of high gain (G~100), as needed for inertial fusion energy. IFI uses separate drivers for the two basic elements, fuel compression and ignition, allowing maximum control and optimization of each. On the other hand, conventional laser fusion uses multiple beams of the same driver to compress the fuel and shock-heat its very center to ignite a burn wave. Despite impressive progress in conventional laser fusion, the precise spatial symmetry, temporal pulse shaping and timing required for high gain and IFE remain a serious unmet challenge.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A simple and effective five-equation two-phase numerical model for liquid-vapor phase transition in cavitating flows

Numerical difficulties, notably the non-monotonic behavior of the Wood speed of sound and the volume fraction positivity, associated with the reduced five-equation two-phase flow model of Kapila et al. (2001) [A.K. Kapila, R. Menikoff, J.B. Bdzil, S.F. Son, D.S. Stewart, 2001. Two-phase modeling of deflagration-to-detonation transition in granular materials: reduced equations, Physics of Fluids 13(10), 3002–3024] have been resolved in the past through the introduction of a frozen speed of sound and an algebraic approach for mechanical relaxation afforded by a pressure non-equilibrium six-equation model proposed by [R. Saurel, F. Petitpas, R.A. Berry, 2009. Simple and efficient relaxation methods for interfaces separating compressible fluids, cavitating flows and shocks in multiphase mixture, J. Comput. Phys. 228, 1678–1712]. By contrast, it is explored and demonstrated in this work that these difficulties can in fact still be resolved within the numerical scheme for solving the reduced five-equation model by numerically replacing the Wood speed of sound for the estimates of wave speeds in the approximate Riemann solver HLLC with the monotonic mixture speed of sound for a transport five-equation model. For shock interface (artificial mixture separating pure or nearly pure fluids) interaction problems, with the apparent advantage of monotonic behavior of the speed of sound in the interface, the effect of the numerical replacement is also confined to the interface. Differences other than the behavior of the speed of sound within the interface in the solutions due to the replacement diminish with increasing resolution when reasonable solution can be obtained with Wood speed of sound. For cavitating/expansion problems in physical fluid mixture, it is pointed out and explained why acoustics in the numerical solutions still propagate at the Wood speed of sound (therefore consistent with the reduced five-equation model) even though in some cases a much higher speed of sound like the numerical replacement above for solving the reduced five-equation model or the frozen speed of sound for solving a six-equation model is used for the estimates of wave speeds in the HLLC scheme. A variant of the five-equation two-phase flow model by Saurel et al. (2008) [R. Saurel, F. Petitpas, R. Abgrall, 2008. Modelling phase transition in metastable liquids: application to cavitating and flashing flows, J. Fluid Mech. 607, 313–350] is then constructed for liquid-vapor phase transition in cavitating flows. The relaxation toward thermo-chemical equilibrium during phase transition is achieved by solving a simple system of algebraic equations for the equilibrium state variables for better efficiency, following Pelanti and Shyue (2014) [M. Pelanti, K.-M. Shyue, 2014. A mixture-energy-consistent six-equation two-phase numerical model for fluid with interfaces, cavitation and evaporation waves. J. Comput. Phys. 259, 331–357]. Therefore, the current model retains both the simplicity afforded by the five-equation model and the efficiency of the algebraic relaxation solver. An alternative algebraic approach for handling the non-conservative term (the so-called K∇ · u term) in the reduced five-equation model for mechanical equilibrium of a liquid-vapor mixture is also explored by enforcing the thermal equilibrium at the same time. Finally, numerical results of sample tests in both one and two dimensions in the literature as well as that in three dimensions demonstrate the effectiveness and ability of the proposed model to simulate cavitating flows. An interesting mechanism of shock generation by acoustics in water due to phase transition is then found by the numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Spatiotemporal evolution of emission and absorption signatures in a laser-produced plasma

Here we report spatiotemporal evolution of emission and absorption signatures of Al species in a nanosecond (ns) laser-produced plasma (LPP). The plasmas were generated from an Inconel target, which contained ~0:4 wt. % Al, using 1064 nm, ≈6 ns full width half maximum pulses from an Nd:YAG laser at an Ar cover gas pressure of ≈34 Torr. The temporal distributions of the Al I (394.4 nm) transition were collected from various spatial points within the plasma employing time-of-flight (TOF) emission and laser absorption spectroscopy, and they provide kinetics of the excited state and ground state population of the selected transition. The emission and absorption signatures showed multiple peaks in their temporal profiles, although they appeared at different spatial locations and times after the plasma onset. The absorption temporal profiles showed an early time signature representing shock wave propagation into the ambient gas. We also used emission and absorption spectral features for measuring various physical properties of the plasma. The absorption spectral profiles are utilized for measuring linewidths, column density, and kinetic temperature, while emission spectra were used to measure excitation temperature. A comparison between excitation and kinetic temperature was made at various spatial points in the plasma. Our results highlight that the TOF measurements provide a resourceful tool for showing the spatiotemporal LPP dynamics with higher spatial and temporal resolution than is possible with spectral measurements but are difficult to interpret without additional information on excitation temperatures and linewidths. The combination of absorption and emission TOF and spectral measurements thus provides a more complete picture of LPP spatiotemporal dynamics than is possible using any one technique alone.

(140.3440) Laser-induced breakdown, (280.4788) Opt↗
DOE OSTI2022

Few-femtosecond resolved imaging of laser-driven nanoplasma expansion

Abstract The free expansion of a planar plasma surface is a fundamental non-equilibrium process relevant for various fields but as-yet experimentally still difficult to capture. The significance of the associated spatiotemporal plasma motion ranges from astrophysics and controlled fusion to laser machining, surface high-harmonic generation, plasma mirrors, and laser-driven particle acceleration. Here, we show that x-ray coherent diffractive imaging can surpass existing approaches and enables the quantitative real-time analysis of the sudden free expansion of laser-heated nanoplasmas. For laser-ionized SiO 2 nanospheres, we resolve the formation of the emerging nearly self-similar plasma profile evolution and expose the so far inaccessible shell-wise expansion dynamics including the associated startup delay and rarefaction front velocity. Our results establish time-resolved diffractive imaging as an accurate quantitative diagnostic platform for tracing and characterizing plasma expansion and indicate the possibility to resolve various laser-driven processes including shock formation and wave-breaking phenomena with unprecedented resolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Global Hybrid Simulations of Interaction Between Interplanetary Rotational Discontinuity and Bow Shock/Magnetosphere: Can Ion-Scale Magnetic Reconnection be Driven by Rotational Discontinuity Downstream of Quasi-Parallel Shock?

Ion-scale magnetic reconnection has been observed downstream of the terrestrial quasi-parallel (Q-∥) shock. Whether it is driven by interplanetary discontinuities or turbulent Q-∥ shock, however, is unclear. Using three-dimensional global hybrid simulation, we investigate the generation of magnetic reconnection downstream of the Q-∥ shock, while an interplanetary rotational discontinuity (RD) is launched to the bow shock. Cases with various solar wind Alfvén Mach numbers, M A = 3.0 to 8, and propagation directions of the RD are presented. The propagation direction n is assumed to be in the GSE xz plane and pointing earthward, with n = (-sin(θ 12 /2),0,-cos(θ 12 /2)), where θ 12 is the angle between the upstream (B1) and downstream (B2) magnetic fields across the transmitted RD. It is found that magnetic reconnection occurs inside the RD downstream of the Q-∥ shock, forming flux ropes extending along the dawn-dusk direction about tens of ion inertial lengths. Large-amplitude low-frequency waves originated from the Q-∥ shock lead to the bending and squeezing of the field lines around the RD, which play an important role in triggering reconnection inside the RD. As the RD impacts the dayside magnetopause, magnetopause reconnection takes place between the field lines behind the RD and geomagnetic field lines. Nevertheless, no reconnection is found downstream of the Q-∥ shock itself or outside the RD in the magnetosheath. The existent and structure of reconnection in the magnetosheath are found to strongly depend on the parameters M A and n. Our simulation shows that ion-scale magnetic reconnection is driven by an external driver in the form of the compression of an RD around the bow shock and in the magnetosheath, rather than caused by the turbulent Q-∥ shock alone.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Electron acceleration at oblique angles via stimulated Raman scattering at laser irradiance >10 16 W cm –2 μm 2

The generation of hot, directional electrons via laser-driven stimulated Raman scattering (SRS) is a topic of great importance in inertial confinement fusion (ICF) schemes. Little recent research has been dedicated to this process at high laser intensity, in which back, side, and forward scatter simultaneously occur in high energy density plasmas, of relevance to, for example, shock ignition ICF. In this paper, we present an experimental and particle-in-cell (PIC) investigation of hot electron production from SRS in the forward and near-forward directions from a single speckle laser of wavelength λ 0 = 1.053μm, peak laser intensities in the range I 0 = 0.2–1.0×10 17 Wcm –2 and target electron densities between ne = 0.3–1.6% n c , where n c is the plasma critical density. As the intensity and density are increased, the hot electron spectrum changes from a sharp cutoff to an extended spectrum with a slope temperature T = 34 ± 1 keV and maximum measured energy of 350 keV experimentally. Multidimensional PIC simulations indicate that the high energy electrons are primarily generated from SRS-driven electron plasma wave phase fronts with k vectors angled ~50° with respect to the laser axis. These results are consistent with analytical arguments that the spatial gain is maximized at an angle which balances the tendency for the growth rate to be larger for larger scattered light wave angles until the kinetic damping of the plasma wave becomes important. The efficiency of generated high energy electrons drops significantly with a reduction in either laser intensity or target electron density, which is a result of the rapid drop in growth rate of Raman scattering at angles in the forward direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

The effects of laser pulse length and collisional ionization on the acceleration of titanium ions

Abstract The interaction of a relativistic laser pulse ( > 10 18 W cm −2 µ m 2 ) with foil targets can accelerate ions to energies of tens of MeV u −1 with optimized laser and target parameters. We report the results on simulations of the interaction of a 6.0 × 10 20 W cm −2 laser pulse incident on ultrathin (10–500 nm) titanium foils to investigate the roles of laser pulse duration and ionization mechanisms in the acceleration of titanium ions. While holding peak intensity constant, two laser pulse durations were investigated, 140 and 650 fs. The optimum thickness is dependent on pulse duration, as it requires the concurrence of target transparency with the incidence of the peak laser intensity. The collisional processes do not play a significant role in Ti ion beam generation from the 140 fs laser pulse duration at the optimum thickness (30 nm). However, for the 650 fs laser optimum, collisions improve the conversion efficiency of highly energetic ( > 10 MeV u −1 ), high charge titanium (Ti 21 − 22 + ) by a factor of 20, and the titanium ion cutoff energy by ∼15%. This improvement is due to the fact that collisional ionization increases the electron density of the plasma, which delays the time of relativistic transparency, causing collisions to decrease the optimum foil thickness from 150 to 100 nm. Additionally, collisional ionization increases the charge-to-mass ratio of the titanium, and injects more electrons into the accelerating sheath field. At the optimum thickness, target normal sheath acceleration is the dominant mechanism of acceleration, with additional contributions from radiation pressure and shock wave acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Numerical study on spray collapse process of ECN spray G injector under flash boiling conditions

This work features a numerical study of the spray collapse process that occurs under flash-boiling, gasoline-direct-injection conditions. The Engine Combustion Network's Spray G injector was modeled, and iso-octane, n-hexane, and propane were used as fuels with the goal to investigate fuel property effects. The development of individual jets and jet-to-jet interaction were analyzed to reveal the physical mechanisms of spray collapse. The results agreed qualitatively well with the experimental data of propane available from the literature and the predictions revealed the model's ability to capture the near-nozzle shock structures witnessed in the experiments. Simulations showed that the flow development of flashing sprays was strongly tied with the fuel properties. Specifically, under-expanded jets were not observed with iso-octane due to the fuel's low vapor pressure. In the case of n-hexane, the jets were under-expanded, and a low-pressure core was observed inside the jets due to the flow expansion. With propane, the very strong expansion caused the flow to become transonic and generate a unique shock structure near the nozzle exit. The shock structure revealed the formation of primary shock cells within the jets and secondary shock cells induced by jet-to-jet interaction. Based on the results, the spray collapse under flash boiling conditions was mainly attributed to two effects, i.e., the decrease in pressure at the spray center induced by the low-pressure cores inside and between the jets, and the isolation effect due to the jet-to-jet interaction which contributed to maintain the pressure differential between the spray center and the ambient.

42 ENGINEERING↗
DOE OSTI2020

Many-body reactive force field development for carbon condensation in C/O systems under extreme conditions

In this paper, we describe the development of a reactive force field for C/O systems under extreme temperatures and pressures, based on the many-body Chebyshev Interaction Model for Efficient Simulation (ChIMES). The resulting model, which targets carbon condensation under thermodynamic conditions of 6500 K and 2.5 g cm –3 , affords a balance between model accuracy, complexity, and training set generation expense. We show that the model recovers much of the accuracy of density functional theory for the prediction of structure, dynamics, and chemistry when applied to dissociative condensed phase systems at 1:1 and 1:2 C:O ratios, as well as molten carbon. Our C/O modeling approach exhibits a 104 increase in efficiency for the same system size (i.e., 128 atoms) and a linear system size scalability over standard quantum molecular dynamics methods, allowing the simulation of significantly larger systems than previously possible. We find that the model captures the condensed-phase reaction-coupled formation of carbon clusters implied by recent experiments, and that this process is susceptible to strong finite size effects. Overall, we find the present ChIMES model to be well suited for studying chemical processes and cluster formation at pressures and temperatures typical of shock waves. We expect that the present C/O modeling paradigm can serve as a template for the development of a broader high pressure–high temperature force-field for condensed phase chemistry in organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spall strength of additively repaired 304L stainless steel

Additive manufacturing has the potential to repair damaged parts, but the performance of additive materials under high strain rate loading is still uncertain—especially with the added complexity of an interface with an existing wrought material. In this work, 304L stainless steel samples were intentionally damaged and then repaired with wire-fed laser additive manufacturing. The samples were subjected to shock loading to generate incipient spall. Velocimetry and post-mortem metallography results show that when the additive repair process parameters are optimized to reduce porosity and match the equation of state of the original material, the influence of the repair region on the shock propagation is negligible. In conclusion, the free-surface velocity profile and internal damage morphology of the repaired sample are shown to be practically identical to the pristine material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of a Fine-Scale Layered Structure of the Atmosphere on Infrasound Signals from Fragmenting Meteoroids

We investigate the influence of a fine-scale (FS) layered structure in the atmosphere on the propagation of infrasound signals generated by fragmenting meteoroids. Using a pseudo-differential parabolic equation (PPE) approach, we model broadband acoustic signals from point sources at altitudes of 35–100 km. The presence of FS fluctuations in the stratosphere (37–45 km) and the lower thermosphere (100–120 km) modifies ray trajectories, causing multiple arrivals and prolonged signal durations at ground stations. In particular, meteoroids fragmenting at 80–100 km can produce two distinct thermospheric arrivals beyond 150 km range, while meteoroids descending to 50 km or below yield weak, long-lived arrivals within the acoustic shadow zone via antiguiding propagation and diffraction. Comparison with observed infrasound data confirms that FS-layered inhomogeneities can account for multi-arrival “N-waves,” broadening potential interpretations of meteoroid signals. The results also apply to other atmospheric-entry objects, such as sample return capsules, emphasizing how FS structure impacts shock wave propagation. In conclusion, our findings advance understanding of wavefield evolution in a layered atmosphere and have broad relevance for global infrasound monitoring of diverse phenomena (e.g., re-entry capsules, rocket launches, and large-scale explosions).

Aeroacoustics↗
DOE OSTI2022

Explosion dynamics of thin flat foils at high current density

This paper presents characteristic features of the explosion of thin flat foils for currents and pulse risetimes ranging from 8 kA at 350 ns to 1000 kA at ~100 ns. Foils made of aluminum, copper, nickel, and titanium with thicknesses of 1–100 µm are tested. Various diagnostics in the optical, UV, and x-ray spectral ranges are used to image the exploding foils from initial breakdown to complete destruction or pinching. It is shown that foil explosion is a complex process that depends on many factors, but features common to all foils are found that do not depend on the parameters of the generators or, accordingly, on the energy deposited in the foil: for example, the breakdown of flat foils under different conditions occurs at the edges of the foil. For the first time, the formation of a precursor over the central part of the foil is shown, which significantly changes the dynamics of the foil explosion.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Constraining physical models at gigabar pressures

High-energy-density (HED) experiments in convergent geometry are able to test physical models at pressures beyond hundreds of millions of atmospheres. The measurements from these experiments are generally highly integrated and require unique analysis techniques to procure quantitative infor mation. This work describes a methodology to constrain the physics in convergent HED experiments by adapting the methods common to many other fields of physics. As an example, a mechanical model of an imploding shell is constrained by data from a thin-shelled direct-drive exploding-pusher experiment on the OMEGA Laser System using Bayesian inference, resulting in the reconstruction of the shell dynamics and energy transfer during the implosion. The model is tested by analyzing synthetic data from a 1-D hydrodynamics code and is sampled using a Markov chain Monte Carlo to generate the posterior distributions of the model parameters. As a result, the goal of this work is to demonstrate a general methodology that can be used to draw conclusions from a wide variety of HED experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Molecular dynamics simulations of inelastic x-ray scattering from shocked copper

By taking the spatial and temporal Fourier transforms of the coordinates of the atoms in molecular dynamics simulations conducted using an embedded-atom-method potential, we calculate the inelastic scattering of x rays from copper single crystals shocked along [001] to pressures of up to 70 GPa. Above the Hugoniot elastic limit, we find that the copious stacking faults generated at the shock front introduce strong quasi-elastic scattering (QES) that competes with the inelastic scattering signal, which remains discernible within the first Brillouin zone; for specific directions in reciprocal space outside the first zone, the QES dominates the inelastic signal overwhelmingly. The synthetic scattering spectra we generate from our Fourier transforms suggest that energy resolutions of order 10 meV would be required to distinguish inelastic from quasi-elastic scattering within the first Brillouin zone of shock-loaded copper. We further note that high-resolution inelastic scattering also affords the possibility of directly measuring particle velocities via the Doppler shift. These simulations are of relevance to future planned inelastic scattering experiments at x-ray Free Electron Laser facilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Strength of porous α-SiO 2 in a shock loaded environment: Calibration via Richtmyer–Meshkov instability and validation via Mach lens

The strength of brittle porous media is of concern in numerous applications, for example, earth penetration, crater formation, and blast loading. Thus, it is of importance to possess techniques that allow for constitutive model calibration within the laboratory setting. The goal of the current work is to demonstrate an experimental technique allowing for strength assessment of porous media subjected to shock loading, which can be implemented into pressure-dependent yield surfaces within numerical simulation schemes. As a case study, the deviatoric response of distended α-SiO 2 has been captured in a tamped Richtmyer–Meshkov instability (RMI) environment at a pressure regime of 4–10 GPa. Hydrocode simulations were used to interpret RMI experimental data, and a resulting pressure-dependent yield surface akin to the often employed modified Drucker–Prager model was calibrated. Simulations indicate that the resulting jet length generated by the RMI is sensitive to the porous media strength, thereby providing a feasible experimental platform capable of capturing the pressurized granular deviatoric response. Furthermore, in efforts to validate the RMI-calibrated strength model, a set of Mach-lens experiments was performed and simulated with the calibrated pressure-dependent yield surface. Excellent agreement between the resulting Mach-lens length in experiment and simulation provides additional confidence to the RMI yield-surface calibration scheme.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Biermann battery magnetic fields in ICF capsules: Total magnetic flux generation

This paper focuses on the process of magnetic flux generation in inertial confinement fusion implosions. Hot-spots are shown to be dominated by fields generated during stagnation when the temperature and density gradients are largest. A scaling of hot-spot magnetic flux is derived and compared with simulations, revealing that perturbations with both larger amplitudes and higher mode numbers generate more magnetic flux. Furthermore, the model allows for greater understanding of which target designs will be susceptible to magnetohydrodynamic effects. For example, the model can be used to ascertain the time when most magnetic flux is generated. If generation is weighted more toward early times, then more high-mode magnetic field loops will be present. A hot-spot with no high-mode perturbations at time of peak neutron production can still contain significant magnetic flux on those scales. By assuming that magnetic flux is deposited at the hot-spot edge by Nernst advection, the model can be used to post-process radiation-hydrodynamics data to estimate magnetic field strengths and magnetizations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

An MPMD approach coupling electromagnetic continuum mechanics approximations in ALEGRA

In this work, two complementary approximations for describing aspects of continuum electromagnetics in moving media are discussed: electroquasistatic and magnetoquasistatic. Each has been implemented in the finite element shock code ALEGRA for modeling dynamic electromechanical phenomena on typical engineering time scales, with fully integrated circuit coupling. The approximations can be obtained by consistent asymptotic balancing of Maxwell’s equations relative to timescales associated with magnetic diffusion, charge relaxation, and electromagnetic wave propagation. In ALEGRA, the electroquasistatic approximation is used for ferroelectric (FE) modeling, while the magnetoquasistatic approximation is used for magnetohydrodynamic (MHD) modeling. In this paper we introduce for the first time a detailed derivation of a useful quasi-steady “low-R m ” variant of the MHD approximation applicable for cases, such as with detonators, where the thermodynamic pressure arising from Joule heating dominates over magnetic forces. An additional purpose of this paper is to present a coupling mode using Multiple Program-Multiple Data (MPMD) message passing communication that allows the user to run 3D FE problems together with 2D and/or 3D MHD problems with the respective simulation domains coupled through a common circuit equation. The MPMD coupling capability is used here to model the dynamic coupling of a notional ferroelectric generator with an RP-87 exploding bridgewire detonator. The simulated bridgewire heats up and bursts under current generated by simulated depoling of the ferroelectric generator, as a demonstration of the MPMD capability.

42 ENGINEERING↗
DOE OSTI2020

Modeling hydrodynamics, magnetic fields, and synthetic radiographs for high-energy-density plasma flows in shock-shear targets

Three-dimensional FLASH radiation-magnetohydrodynamics (radiation-MHD) modeling is carried out to study the hydrodynamics and magnetic fields in the shock-shear derived platform. Here, simulations indicate that fields of tens of Tesla can be generated via the Biermann battery effect due to vortices and mix in the counterpropagating shock-induced shear layer. Synthetic proton radiography simulations using MPRAD and synthetic X-ray image simulations using SPECT3D are carried out to predict the observable features in the diagnostics. Quantifying the effects of magnetic fields in inertial confinement fusion and high-energy-density plasmas represents frontier research that has far-reaching implications in basic and applied sciences.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗