Search NASA⌕ Search

SEARCH · Search NASA

Results for “SODIUM VAPOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Investigation into the role of NaCl deposited on oxide and metal substrates in the initiation of hot corrosion

Morphological aspects of the conversion to Na2SO4 of NaCl deposits over the temperature range 500-700 C, in air with added SO2 and H2O. Progress of the reaction was observed by withdrawing samples at various times and examining them under the scanning electron microscope using EDAX to assess the extent of chloride to sulfate conversion. These initial results show that the conversion to Na2SO4 proceeds directly on the sodium chloride surface as well as on the surrounding substrate due to evaporation of NaCl from the solid particle. The mechanism of this reaction could involve reaction in the vapor to produce Na2SO4 which then deposits, alternatively Na2SO4 could form directly on the substrate surface due to direct reaction there between the vapors NaCl, SO2 and O2.

Birks, N.↗
NASA NTRS1982

The atmospheres of Io and other satellites

Voyager measurements of gaseous SO2 in a hot spot region and of ions of sulfur, oxygen, and SO2(+) in the plasma torus, combined with the groundbased measurements of SO2 frost on the surface, indicate that SO2 is perhaps the dominant constituent of Io's atmosphere. Indeed the ionosphere of Io can be sustained by a pure SO2 atmosphere in thermal equilibrium with the surface. Upper limits on common volatiles H2O, CO2, NH3, and CH4 and exceedingly small, although S2 and Ar may still be present. Photochemistry of SO2 could lead to O2 as the major gas on the night side. Reasonable processes for loss to the torus include thermal escape, sputtering, and sweep-up of ions. The symmetry of the sodium cloud between eastern and western elongation is difficult to reconcile with any substantial, diurnally varying atmosphere. Europa, Ganymede, and Callisto may have oxygen atmospheres resulting from photolysis of water vapor. A pressure of approximately 10 to the -6th microbar is predicted, consistent with the Voyager upper limit for Ganymede. A much higher pressure might be present if the water vapor pressure is increased by a low albedo (Callisto) or sputtering (Europa).

Kumar, S.↗
NASA NTRS1994

Potassium Beta-Alumina/Molybdenum/Potassium Electrochemical Cells

potassium alkali metal thermal-to-electric converter (K-AMTEC) cells utilizing potassium beta alumina solid electrolyte (K-BASE) are predicted to have improved properties for thermal to electric conversion at somewhat lower temperatures than sodium AMTEC's.

thermal-to-electric converter vapor pressure ceram↗
NASA NTRS1972

Study of mechanism which causes film formation on mercury surfaces

The mechanism by which small quantities of dissolved tin, sodium, and lithium lower the rate of evaporation of mercury in vacuum is determined. An apparatus was built in which dilute amalgams could be prepared and studied in an oxygen-free environment before being exposed to oxygen under controlled conditions. The apparatus was able to maintain a pressure of less than 1.3 x 0.000001 N/sqm (10 to the minus 8th power torr) of gases and vapors other than mercury and less than 1.3 x 10 to the minus 8th N/sq m (10 to the minus 10th power torr) partial pressure of oxygen; also, it provided for mechanical sweeping of the liquid metal surfaces in the vacuum environment. The rates of evaporation of pure mercury and of dilute amalgams of tin (52 ppm), sodium (229 ppm), and lithium (165 ppm) were determined at temperature between 25 and 55 C both before and after 70 minute exposures to an approximately 270 N/sq m (2 torr) pressure of oxygen. The rates of evaporation of the pure mercury and the amalgams as first prepared were similar but the rates for the amalgams were reduced by at least 80% at 25 C as a result of the exposure to oxygen. The effect of the oxygen treatment could be completely removed by sweeping the amalgam surfaces. It was concluded that the reduced rates of evaporation resulted from the formation of transparent, insoluble, oxide films on the amalgam surfaces.

Frohnsdorff, G.↗
NASA NTRS1980

Method of producing silicon

A liquid reactant injector assembly suited for the injection of liquid reactant into a high temperature metal reductant vapor and carrier gas stream for the production of metal is presented. The assembly is especially adapted for the continuous production of high purity silicon by the reduction of SiCl4 with sodium. The assembly includes a refractory-lined, hollow metal shell having ten equally-spaced, concentric, radially directed ports provided in the shell and wall. A hydraulic, atomizing type spray nozzle is mounted in each of the ports recessed from the inner wall surface.

Wolf, C. B.↗
NASA NTRS2000

Lidar Remote Sensing for Industry and Environment Monitoring

Contents include the following: 1. Keynote paper: Overview of lidar technology for industrial and environmental monitoring in Japan. 2. lidar technology I: NASA's future active remote sensing mission for earth science. Geometrical detector consideration s in laser sensing application (invited paper). 3. Lidar technology II: High-power femtosecond light strings as novel atmospheric probes (invited paper). Design of a compact high-sensitivity aerosol profiling lidar. 4. Lasers for lidars: High-energy 2 microns laser for multiple lidar applications. New submount requirement of conductively cooled laser diodes for lidar applications. 5. Tropospheric aerosols and clouds I: Lidar monitoring of clouds and aerosols at the facility for atmospheric remote sensing (invited paper). Measurement of asian dust by using multiwavelength lidar. Global monitoring of clouds and aerosols using a network of micropulse lidar systems. 6. Troposphere aerosols and clouds II: Scanning lidar measurements of marine aerosol fields at a coastal site in Hawaii. 7. Tropospheric aerosols and clouds III: Formation of ice cloud from asian dust particles in the upper troposphere. Atmospheric boundary layer observation by ground-based lidar at KMITL, Thailand (13 deg N, 100 deg. E). 8. Boundary layer, urban pollution: Studies of the spatial correlation between urban aerosols and local traffic congestion using a slant angle scanning on the research vessel Mirai. 9. Middle atmosphere: Lidar-observed arctic PSC's over Svalbard (invited paper). Sodium temperature lidar measurements of the mesopause region over Syowa Station. 10. Differential absorption lidar (dIAL) and DOAS: Airborne UV DIAL measurements of ozone and aerosols (invited paper). Measurement of water vapor, surface ozone, and ethylene using differential absorption lidar. 12. Space lidar I: Lightweight lidar telescopes for space applications (invited paper). Coherent lidar development for Doppler wind measurement from the International Space Station. 13. Space lidar II: Using coherent Doppler lidar to estimate river discharge. 14. Poster session: Lidar technology, optics for lidar. Laser for lidar. Middle atmosphere observations. Tropospheric observations (aerosols, clouds). Boundary layer, urban pollution. Differential absorption lidar. Doppler lidar. and Space lidar.

Singh, Upendra N.↗
NASA NTRS1960

Analytical Investigation of Cycle Characteristics for Advanced Turboelectric Space Power Systems

An investigation was made of the relative influence of turbine inlet temperature, radiator temperature, and turbine efficiency on radiator area for Rankine cycles with rubidium, potassium, and sodium as working fluids. It was determined that, whereas turbine inlet temperature and turbine efficiency have gross effects on radiator size for a given inlet temperature a considerable latitude in the selection of radiator temperature may be accepted with only minor effects on required radiator size. Also investigated was the influence on turbine efficiency and design of the factors that distinguish alkali-metal vapor turbines from conventional gas turbines. The turbine configuration was determined to be a function of the involved working fluids and rotor blade speed. For a given blade speed, the number of stages required for high turbine efficiency was found to vary directly with turbine specific work output, and therefore to vary in the ratio 5 to 2.5 to 1 for sodium, potassium, and rubidium, respectively. Lower blade speeds than employed in conventional gas turbines may be required to satisfy critical stress considerations resulting from the elevated temperatures involved and the criterion of long-duration reliability. This will increase the number of turbine stages necessary to obtain high turbine efficiency and consequently increase turbine weight. The question of moisture formation was discussed and a calculation was made to indicate the nature of the aerodynamic losses due to moisture content. Various means of reducing moisture content were considered, including mechanical removal, increased radiator temperature, inefficient expansion, superheat, and reheat. Sample calculations were made in most cases to indicate their comparative effectiveness and resultant penalty in required radiator area.

Moffitt, Thomas P.↗
NASA NTRS1976

Reactions of chromium with gaseous NaCl in an oxygen environment

Target collection techniques and high pressure mass spectrometric sampling have been used to study the formation of volatile chromium-containing species in the reaction of Cr2O3 in the condensed state with gaseous O2 and NaCl. Experiments were performed at atmospheric pressure as a function of chromium temperature, oxygen pressure, and NaCl concentration. The major chromium-containing vapor species were found to be (NaCl)xCrO3, with x = 1,2, and 3, which are products of heterogeneous reactions on the surface. The kinetics indicate first order dependence on oxygen and sodium chloride pressures.

Stearns, C. A.↗
NASA NTRS1976

Reactions of chromium with gaseous NaCl in an oxygen environment

Target collection techniques and high pressure mass spectrometric sampling have been used to study the formation of volatile chromium-containing species in the reaction of Cr2O3 with O2 and NaCl gases. Experiments were performed at atmospheric pressure as a function of chromium temperature, oxygen pressure, and NaCl gas concentration. The major chromium-containing vapor species were found to be (NaCl)x CrO3 gas, with x = 1,2, and 3, which are products of heterogeneous reactions on the surface. The kinetics indicate first order dependence on oxygen and sodium chloride pressures.

Stearns, C. A.↗
NASA NTRS1986

Heat pipe cooling for scramjet engines

Liquid metal heat pipe cooling systems have been investigated for the combustor liner and engine inlet leading edges of scramjet engines for a missile application. The combustor liner is cooled by a lithium-TZM molybdenum annular heat pipe, which incorporates a separate lithium reservoir. Heat is initially absorbed by the sensible thermal capacity of the heat pipe and liner, and subsequently by the vaporization and discharge of lithium to the atmosphere. The combustor liner temperature is maintained at 3400 F or less during steady-state cruise. The engine inlet leading edge is fabricated as a sodium-superalloy heat pipe. Cooling is accomplished by radiation of heat from the aft surface of the leading edge to the atmosphere. The leading edge temperature is limited to 1700 F or less. It is concluded that heat pipe cooling is a viable method for limiting scramjet combustor liner and engine inlet temperatures to levels at which structural integrity is greatly enhanced.

Silverstein, Calvin C.↗
NASA NTRS1993

Transport phenomena in the crystallization of lysozyme by osmotic dewatering and liquid-liquid diffusion in low gravity

Two methods of protein crystallization, osmotic dewatering and liquid-liquid diffusion, like the vapor diffusion (hanging-drop and sessile-drop) methods allow a gradual approach to supersaturation conditions. The crystallization of hen egg-white lysozyme, an extensively characterized protein crystal, in the presence of sodium chloride was used as an experimental model with which to compare these two methods in low gravity and in the laboratory. Comparisons of crystal growth rates by the two methods under the two conditions have, to date, indicated that the rate of crystal growth by osmotic dewatering is nearly the same in low gravity and on the ground, while much faster crystal growth rates can be achieved by the liquid-liquid diffusion method in low gravity.

Todd, Paul↗
NASA NTRS1994

Nucleation and chiral symmetry breaking under controlled hydrodynamic flows

The effects of hydrodynamic convection on nucleation and broken chiral symmetry have been investigated for a simple inorganic molecule, sodium chlorate (NaClO3). Our experiment suggests that the symmetry breaking is a result of hydrodynamic amplification of rare nucleation events. The effect is more pronounced when the primary nucleation occurs on the solute-vapor interface, where mixing in the surface sublayer becomes important. The transition from the achiral to the chiral states appears to be smooth as the hydrodynamic parameters, such as flow rate, are varied.

Wu, Xiao-Lun↗
NASA NTRS1978

Novel duplex vapor electrochemical method for silicon solar cells

Progress in the development of low-cost solar arrays is reported. Topics covered include: (1) development of a simplified feed system for the Na used in the Na-SiF4 reactor; (2) production of high purity silicon through the reduction of sodium fluosilicate with sodium metal; (3) the leaching process for recovering silicon from the reaction products of the SiF4-Na reaction; and (4) silicon separation by the melting of the reaction product.

Kapur, V.↗
NASA NTRS1997

Planetary Aeronomy and Related Studies

Mercury atmosphere - Sprague and Hunten, in collaboration with Katharina Lodders of Washington University, proposed, mainly on cosmochemical grounds, that S atoms are an important constituent of the atmosphere (30 times more abundant than sodium). This paper has appeared in Icarus. We also suggest that condensed sulfur is an excellent candidate for the radar-bright polar caps, more plausible than water ice because the latter is only barely stable even in permanently-shadowed craters. The best prospect for detection of the vapor is through its resonance lines, a triplet near 1814 A. Mercury is too close to the Sun to be observed by any existing space telescope, but there is some prospect that the search could be made from a Shuttle-based spectrograph such as Lyle Broadfoot's USTAR. Sprague and Hunten have completed an elaborate data analysis of over 100 measurements of the Na D lines, obtained with the 61-inch telescope and our echelle spectrograph. Full account has been taken of the radiative-transfer problem that arises because the Na atmosphere is not optically thin. The output of this code is used in another program that makes an elaborate inverse interpolation in two angles and optical depth and computes the effect of the seeing (always bad for Mercury). The seeing is determined by fitting cuts across a computed image to part of the spectrum adjacent to the sodium lines, and typically ranges from slightly less than 4 arcsec to worse than 6 (diameter at l/e of a Gaussian). The final result is a list of Na abundances, with some information on spatial distribution. One particularly interesting result of further analysis is a strong abundance maximum in the morning relative to the afternoon, confirming an earlier result for potassium, based on much fewer measurements. The analysis are completed during the extension of the present grant. This work depends heavily on the Hapke parameters used to estimate the reflectance of Mercury's surface. The paper by Domingue et al. examines the credibility of the available parameters, which are derived from disk-unresolved photometry, and concludes that errors in the derived Na abundances could be as great as 30%.

Hunten, D. M.↗
NASA NTRS1980

Study of the effects of gaseous environments on the hot corrosion of superalloy materials

The effect of the gaseous corrodent NaCl on the high temperature oxidation and sodium sulfate induced hot corrosion behavior of alumina formers, chromia formers, and the superalloy B-1900 was examined. Isothermal experiments were conducted at 900 C and 1050 C in air in the presence and absence of NaCl vapors. Microstructural changes in oxide morphology and increased rates of oxidation were observed when NaCl(g) was present. It is hypothesized that the accelerated rates of oxidation are the result of removal of aluminum from the scale substrate interface and the weakening of the scale substrate bonds. The aluminum removed was redeposited on the surfaces in the form of alumina whiskers. For the superalloy B-1900, alumina whiskers are also formed, and the alloy oxidizes at catastrophic rates. In the case of Ni-25Cr alloy, NaCl vapors interact with the scale depleting it of chromium.

Smeggil, J. G.↗
NASA NTRS1992

High temperature conductivity of potassium-beta(double prime)-alumina

Potassium beta(double prime)-alumina (BDPA) single crystals have been reported by several groups to leave higher ionic conductivity than sodium BDPA crystals at room temperature, and similar conductivities are obtained at temperatures up to 600-700 K. Potassium BDPA ceramics have been reported to have significantly poorer conductivities than those of sodium BDPA ceramics, but conductivity measurements at temperatures above 625 K have not been reported. In this study, K(+)-BDPA ceramics were prepared from Na(+)-BDPA ceramic using a modified version of the exchange reaction with KCl vapor reported by Crosbie and Tennenhouse (1982), and the conductivity has been measured in K vapor at temperatures up to 1223 K, using the method of Cole et al. (1979). The results indicate reasonable agreement with earlier data on K(+)-BDPA ceramic measured in a liquid K cell, but show that the K(+)-BDPA ceramic's conductivity approaches that of Na(+)-BDPA ceramic at higher temperatures, being within a factor of four at 700 K and 60 percent of the conductivity of Na(+)-BDPA at T over 1000 K. Both four-probe dc conductivity and four probe ac impedance measurements were used to characterize the conductivity. A rather abrupt change in the grain boundary resistance suggesting a possible phase change in the intergranular material, potassium aluminate, is seen in the ac impedance behavior.

Williams, R. M.↗
NASA NTRS1978

Performance investigations of liquid-metal heat pipes for space and terrestrial applications

The high heat transfer capacity of liquid-metal heat pipes is demonstrated in performance tests with mercury, potassium, sodium, and lithium working fluids and wick structures which serve to minimize liquid pressure losses and vapor/liquid interactions. Appropriate wicks for horizontal and vertical operation are described. It is shown that heat-transfer with these wicks is limited by vapor flow effects. Examples are given of particular effects associated with a long adiabatic section between evaporator and condenser and with a heat source of uniform temperature as opposed to a source of uniform power.

Kemme, J. E.↗
NASA NTRS1987

On the role of convective motion during dendrite growth: Experiments under variable gravity, revised

Experiments show the effect of self induced convection on individual dendrite growth in uniformly supercooled samples and solidification of the resulting mush under conditions of high and low g. Convection is visualized by a Schlieren optical system or a Mach Zender interferometer. For ice crystals growing from the vapor in air, a slight reduction in linear growth rate occur under low g. For ice crystals growing from NaCl solution, dendrite tip velocities are unchanged, but subsequent mush solidification is enhanced through drainage channels under higher g. By contrast, sodium sulfate decahydrate dendrites growing from solution produce convective plumes which lead to higher tip growth rate only as the crystal growth direction approaches that of gravity. Convective plumes are laminar for small crystals under conditions of these experiments; the rise velocity of such plumes is greater than individual vortex rings under identical conditions. Convection effects are only present in solution under a critical supercooling less than about 5 C for sodium sulfate and 2 C for ice in NaCl since at higher supercooling the crystallization velocity, proportional to the square of the supercooling, exceeds the convective velocity, proportional to the square root of the supercooling. The role of convective velocity in bulk solidification is to give a large scale flow which under extreme cases may lead to extensive secondary crystal production, which alters the resulting crystal texture of the completely solidified melt.

Hallett, J.↗