Search NASA⌕ Search

SEARCH · Search NASA

Results for “SONIC FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

The formation of a standing shock in a polytropic solar wind model within 1-10 Rs

It is shown how a one-fluid polytropic solar wind model exhibits properties similar to an isothermal wind when localized momentum and/or rapid area divergence produce multiple critical points in the flow. In particular, it is shown that when the sonic transition in the flow occurs closer to the coronal base, multiple steady solutions can exist. These multiple steady solutions consist of a contiuous solution passing through the innermost critical point and other steady solutions involving a steady shock transition. By following the temporal evolution of the solar wind from a steady state with one critical point to a steady state with three critical points, it is shown that a standing shock solution is more likely to develop than a continuous solution when momentum deposition occurs close to the coronal base and the equation of motion admits multiple steady solutions. This result is particularly relevant to the solar wind when momentum deposition occurs as a result of a rapidly diverging coronal hole geometry.

Habbal, S. R.↗

Theoretical analysis of aircraft afterbody flow

The strongly interactive flow field about aircraft afterbodies is investigated using computational techniques by which the thin-shear-layer formulation of the compressible, Reynolds-averaged Navier-Stokes equations is solved. A time-dependent implicit numerical algorithm is used to obtain solutions for a variety of afterbody and nozzle geometries, within the class of bodies of revolution, for both subsonic and supersonic external flow, and for sonic and supersonic underexpanded jets. Only centered nozzles with either a sharp lip or a blunt base are considered. In all cases, computed results are compared with experimental data taken at flight Reynolds numbers for like-flow conditions. Turbulence closure is realized using algebraic eddy-viscosity concepts. A new and unique adaptive-grid technique is used to resolve flow regimes with large gradients and to improve the accuracy and efficiency of the computational scheme. Special singular point boundary conditions are used for similar purposes, and are especially effective for highly under-expanded jets. For all cases considered, except one with a very large base-to-nozzle-exit-diameter ratio, the agreement with experimental measurements is excellent. For geometries with large base regions, enhancements in the turbulence transport model are necessary to support improvements in the flow-field simulation.

Deiwert, G. S.↗

Low-temperature transonic cooling flows in galaxy clusters

Calculations are presented which demonstrate that cooling flow models with large sonic radii may be consistent with observed cluster gas properties. It is found that plausible cluster parameters and cooling flow mass accretion rates can produce sonic radii of 10-20 kpc for sonic point temperatures of 1-3 x 10 to the 6th K. The numerical calculations match these cooling flows to hydrostatic atmosphere solutions for the cluster gas beyond the cooling flow region. The cooling flows produce no appreciable 'holes' in the surface brightness toward the cluster center, and the model can be made to match the observed X-ray surface brightness of three clusters in which cooling flows had been believed to be absent. It is suggested that clusters with low velocity dispersion may be the natural location for such 'cool' cooling flows, and fits of these models to the X-ray surface brightness profiles for three clusters are presented.

Sulkanen, Martin E.↗

Procedures for Computing Transonic Flows for Control of Adaptive Wind Tunnels

Numerical methods are developed for control of three dimensional adaptive test sections. The physical properties of the design problem occurring in the external field computation are analyzed, and a design procedure suited for solution of the problem is worked out. To do this, the desired wall shape is determined by stepwise modification of an initial contour. The necessary changes in geometry are determined with the aid of a panel procedure, or, with incident flow near the sonic range, with a transonic small perturbation (TSP) procedure. The designed wall shape, together with the wall deflections set during the tunnel run, are the input to a newly derived one-step formula which immediately yields the adapted wall contour. This is particularly important since the classical iterative adaptation scheme is shown to converge poorly for 3D flows. Experimental results obtained in the adaptive test section with eight flexible walls are presented to demonstrate the potential of the procedure. Finally, a method is described to minimize wall interference in 3D flows by adapting only the top and bottom wind tunnel walls.

Rebstock, Rainer↗

Cryogenic and Simulated Fuel Jet Breakup in Argon, Helium and Nitrogen Gas Flows

Two-phase flow atomization of liquid nitrogen jets was experimentally investigated. They were co-axially injected into high-velocity gas flows of helium, nitrogen and argon, respectively, and atomized internally inside a two-fluid fuel nozzle. Cryogenic sprays with relatively high specific surface areas were produced, i.e., ratios of surface area to volume were fairly high. This was indicated by values of reciprocal Sauter mean diameters, RSMD's, as measured with a scattered- light scanning instrument developed at NASA Lewis Research Center. Correlating expressions were derived for the three atomizing gases over a gas temperature range of 111 to 422 K. Also, the correlation was extended to include waterjet breakup data that had been previously obtained in simulating fuel jet breakup in sonic velocity gas flow. The final correlating expression included a new dimensionless molecular-scale acceleration group. It was needed to correlate RSMD data, for LN2 and H2O sprays, with the fluid properties of the liquid jets and atomizing gases used in this investigation.

Ingebo, Robert D.↗

Development of techniques and associated instrumentation for high temperature emissivity measurements

Studies were made to develop a test apparatus for the measurement of total emittance of materials under repeated exposure to simulated earth entry conditions. As no existing test facility met the emittance measurement and entry simulation goals, a new apparatus was designed, fabricated and checked out. This apparatus has the capability of performing total and spectral emittance measurements during cyclic temperature and pressure exposure under sonic and supersonic flow conditions. Emittance measurements were performed on a series of oxidized superalloys, silicide coated columbium alloys and ceramic coatings.

Cunnington, G. R.↗

Aerodynamic sensitivities from subsonic, sonic and supersonic unsteady, nonplanar lifting-surface theory

The technique of implicit differentiation has been used in combination with linearized lifting-surface theory to derive analytical expressions for aerodynamic sensitivities (i.e., rates of change of lifting pressures with respect to general changes in aircraft geometry, including planform variations) for steady or oscillating planar or nonplanar lifting surfaces in subsonic, sonic, or supersonic flow. The geometric perturbation is defined in terms of a single variable, and the user need only provide simple expressions or similar means for defining the continuous or discontinuous global or local perturbation of interest. Example expressions are given for perturbations of the sweep, taper, and aspect ratio of a wing with trapezoidal semispan planform. In addition to direct computational use, the analytical method presented here should provide benchmark criteria for assessing the accuracy of aerodynamic sensitivities obtained by approximate methods such as finite geometry perturbation and differencing. The present process appears to be readily adaptable to more general surface-panel methods.

Yates, E. Carson, Jr.↗

Performance of an aero-space plane propulsion nozzle

An inviscid and viscous analysis is provided for an exposed half nozzle that is used with a scramjet for thrust generation. The analysis is based on the inviscid theory of a two-dimensional, minimum length nozzle with a curved inlet surface, where the flow may be sonic or supersonic. Inlet conditions are prescribed and the gas is assumed to be perfect. Viscous, and when appropriate inviscid, nondimensional parametric results are provided for the thrust, lift, heat transfer, pitching moment, and a variety of boundary-layer thicknesses. In addition to global results, wall distributions of pressure, heat transfer, etc., are provided. The analysis demonstrates that the nozzle produces a considerable lift force whose magnitude may exceed the thrust and a significant pitching moment. The thrust is quite sensitive to the inlet Mach number; it rapidly decreases as the inlet Mach number increases There is little loss in the thrust as the nozzle's downstream wall is truncated. The corresponding decrease in lift and the pitching moment is moderate.

Emanuel, George↗

Near-Field and Far-Field Noise Surveys of Solid-Fuel Rocket Engines for a Range of Nozzle Exit Pressures

Measurements of near- and far-field noise pressures are presented for a 1,500-pound-thrust engine and for several 5,000-pound-thrust engines for which the nozzle exit pressure was changed systematically in order to study its effects on the noise level and spectra. Near-field surveys indicated that the highest noise pressure occurred at about 20 exit diameters downstream if the nozzle near the transition from super-sonic to subsonic flow. The acoustical power radiated from all engines averaged about 0.5 percent of the mechanical power of the exhaust stream, the least noise being radiated by the nozzle having an exit pressure less than atmospheric. The rocket engines of these tests radiate more power per cycle at the lower frequencies than arte reported for subsonic jets in other related studies.

Mayes, William H.↗

Boundary-integral method for calculating aerodynamic sensitivities with illustration for lifting-surface theory

The technique of implicit differentiation has been used in combination with linearized lifting-surface theory to derive analytical expressions for aerodynamic sensitivities (i.e., rates of change of lifting pressures with respect to general changes in aircraft geometry, including planform variations) for steady or oscillating planar or nonplanar lifting surfaces in subsonic, sonic, or supersonic flow. The geometric perturbation is defined in terms of a single variable, and the user need only provide simple expressions or similar means for defining the continuous or discontinuous global or local perturbation of interest. Example expressions are given for perturbations of the sweep, taper, and aspect ratio of a wing with trapezoidal semispan planform. The present process appears to be readily adaptable to more general surface-panel methods.

Yates, E. Carson, Jr.↗

Spray measurements of aerothermodynamic effect on disintegrating liquid jets

An experimental investigation was made to determine the effect of atomizing gas mass flux and temperature on liquid jet breakup in sonic velocity gas flow. Characteristic drop size data were obtained by using the following atomizing gases: nitrogen, argon, and helium to breakup water jets in high velocity gas flow. A scattered light scanning instrument developed at Lewis Research Center was used to measure Sauter mean diameter (SMD). The three gases gave a molecular weight range of 4 to 40 and atomizing gas mass flux and temperature were varied from 6 to 50 g/sq cm and 275-400 K, respectively. The ratio of liquid jet diameter to SMD, D(sub 0)/D(sub 32), was correlated with aerodynamic and liquid-surface force ratios, i.e., the product of the Weber and Reynolds number, We Re, the gas to liquid density ratio, rho(sub g)/rho(sub 1) g and also the molecular scale dimensionless group, rho(sub 1)(Vm exp 3)/ mu(sub 1) g, to give the following expression: D(sub 0)/D(sub 32) = 0.90 x 10(exp -8) x (We Re rho sub g/rho sub 1)exp 0.44 x (rho sub 1 Vm exp 3/mu sub 1 g)exp 0.67 where We Re = ((rho sub g)exp 2(D sub 0)exp 2(V sub C)exp3))/ mu sub 1 sigma, mu sub 1 is liquid viscosity, sigma is surface tension, V sub C is the acoustic gas velocity, V sub m is the RMS velocity of gas molecules, and g is the acceleration of gas molecules due to gravity. Good agreement was obtained with atomization theory for liquid-jet breakup in the regime of aerodynamic stripping. Also, due to its low molecular weight and high acoustic velocity, helium was considerably more effective than nitrogen or argon in producing small-droplet sprays with values of D(sub 32) on the order of 5 microns.

Ingebo, Robert D.↗

Fluid seals technology at BHR Group Ltd.

A mathematical model was developed for ESA, which couples the rigid body dynamics in four degrees of freedom of a flexibly mounted stator (with Coulomb damping) of a turbopump face seal with the fluid film behavior. The interfacial film is assumed gaseous, and the model incorporates laminar/turbulent flow, inertia and sonic choking. Seal faces may be wavy and coned, while the rotating ring can be eccentrically mounted, misaligned with the shaft and oscillate axially at arbitrary frequency. The model is currently being coded into software. An experimental program using a high speed cryogenic/hot gas test rig is being conducted to verify the output of the computer program.

Leefe, Simon↗

1997 NASA High-Speed Research Program Aerodynamic Performance Workshop: Configuration Aerodynamics - Volume 1

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.

Baize, Daniel G.↗

1997 NASA High-Speed Research Program Aerodynamic Performance Workshop: High Lift - Volume 2

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag, prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executives summaries for all the Aerodynamic Performance technology areas.

Baize, Daniel G.↗

1997 NASA High-Speed Research Program Aerodynamic Performance Workshop: Configuration Aerodynamics - Volume 1

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in area of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodyamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.

Baize, Daniel G.↗

1997 NASA High-Speed Research Program Aerodynamic Performance Workshop: Configuration Aerodynamics - Volume 1

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in area of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.

Baize, Daniel G.↗