SEARCH · Search NASA

Results for “STAR GRIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS2004

Research on Spectroscopy, Opacity, and Atmospheres

I propose to continue providing observers with basic data for interpreting spectra from stars, novas, supernovas, clusters, and galaxies. These data will include allowed forbidden line lists both laboratory and computed, for the first five to ten ions of all atoms and for all relevant diatomic molecules. I will eventually expend to all ions of the first thirty elements to treat far UV end X-ray spectra, and for envelope opacities. I also include triatomic molecules providing by other researchers. I have made CDs with Partridge and Schwanke's water data for work on M stars.The luna data also serve as input to my model atmosphere and synthesis programs that generated energy distributions, photometry, limb darkening, and spectra that can be used for planning observations and for fitting observed spectra. The spectrum synthesis programs produce detailed plots with the line identified. Grids of stellar spectra can be used for radial velocity-, rotation-, or abundance templates and for population synthesis. I am fitting spectra of bright stars to test the data and to produce atlases to guide observer. For each star the whole spectrum is computed from the UV to the far IR. The line data, opacities, models, spectra, and programs are freely distributed on CDs and on my web site and represent a unique resource for many NASA programs.

Oliversen, Ronald↗

NASA NTRS1996

Spectral Irradiance Calibration in the Infrared: New Composite Spectra, Comparison with Model Atmospheres, and Far-Infrared Extrapolations - Part 7

We present five new absolutely calibrated continuous stellar spectra constructed as far as possible from spectral fragments observed from the ground, the Kuiper Airborne Observatory (KAO), and the IRAS Low Resolution Spectrometer. These stars-alpha Boo, gamma Dra, alpha Cet, gamma Cru, and mu UMa-augment our six, published, absolutely calibrated spectra of K and early-M giants. All spectra have a common calibration pedigree. A revised composite for alpha Boo has been constructed from higher quality spectral fragments than our previously published one. The spectrum of gamma Dra was created in direct response to the needs of instruments aboard the Infrared Space Observatory (ISO); this star's location near the north ecliptic pole renders it highly visible throughout the mission. We compare all our low-resolution composite spectra with Kurucz model atmospheres and find good agreement in shape, with the obvious exception of the SiO fundamental, still lacking in current grids of model atmospheres. The CO fundamental seems slightly too deep in these models, but this could reflect our use of generic models with solar metal abundances rather than models specific to the metallicities of the individual stars. Angular diameters derived from these spectra and models are in excellent agreement with the best observed diameters. The ratio of our adopted Sirius and Vega models is vindicated by spectral observations. We compare IRAS fluxes predicted from our cool stellar spectra with those observed and conclude that, at 12 and 25 microns, flux densities measured by IRAS should be revised downwards by about 4.1% and 5.7%, respectively, for consistency with our absolute calibration. We have provided extrapolated continuum versions of these spectra to 300 microns, in direct support of ISO (PHT and LWS instruments). These spectra are consistent with IRAS flux densities at 60 and 100 microns.

Cohen, Martin↗

NASA NTRS1985

Interstellar extinction variations in the Large Magellanic Cloud

The properties of ultraviolet extinction in the LMC are reexamined using some of the existing LMC data from the International Ultraviolet Explorer (IUE) satellite and a large number of new observations obtained during the IUE Sixth Episode. The main goal is to determine if the LMC extinction properties are regionally modulated and, if so, to examine the type and range of the variations. Among the new IUE observations presented is a large grid of unreddened LMC flux standards, which will eliminate spectral mismatch effects as complications in the extinction analysis. Eight new reddened stars were observed. The properties of the program stars are summarized; the method for producing the extinction curves (including the criteria for pairing reddened and unreddened stars) is discussed; and the curves themselves are presented and discussed.

Fitzpatrick, E. L.↗

DOE OSTI2023

Validation of LOCA2 and STAR-ESDM Statistically Downscaled Products

The National Climate Assessment (NCA) is the preeminent national report examining current and future risks posed by climate change. Countless agencies, policymakers, stakeholders and other end-users rely upon guidance from the NCA to plan for an uncertain future. These groups all depend on modern curated data, provided alongside the NCA, to quantify the impact of climate change on metrics of relevance for their decision processes. In its fifth iteration (NCA5), two statistically downscaled ensemble products, each providing data at grid spacing of approximately 5km over the contiguous United States, were selected to accompany the report. These include LOCalized Analogs version 2 (LOCA2) and Seasonal Trends and Analysis of Residuals Empirical-Statistical Downscaling Model (STAR-ESDM). Both data products are produced through a process known as statistical downscaling, where relatively coarse Global Climate Model (GCM) data is refined to locally relevant scales through the application of scientifically-supported empirical and algorithmic relationships. In support of the NCA effort, this report provides an independent validation of these two products against historical observations, with a focus on precipitation and near-surface temperature variables. Based on the results of this validation, several recommendations are provided related to the use of these data products. The structure of this report is as follows: In section 2, we review three gridded observational products that are used as part of our intercomparison. In section 3, we describe the two statistical downscaling techniques and their corresponding datasets that are the focus of this study. In section 4, the methodology we employ for validation is described. Section 5 provides results of the validation, which in turn motivate our recommendations on the use of these data products. A brief summary is provided in section 6.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1996

Model Stellar Atmospheres and Real Stellar Atmospheres and Status of the ATLAS12 Opacity Sampling Program and of New Programs for Rosseland and for Distribution Function Opacity

I discuss errors in theory and in interpreting observations that are produced by the failure to consider resolution in space, time, and energy. I discuss convection in stellar model atmospheres and in stars. Large errors in abundances are possible such as the factor of ten error in the Li abundance for extreme Population II stars. Finally I discuss the variation of microturbulent velocity with depth, effective temperature, gravity, and abundance. These variations must be dealt with in computing models and grids and in any type of photometric calibration. I have also developed a new opacity-sampling version of my model atmosphere program called ATLAS12. It recognizes more than 1000 atomic and molecular species, each in up to 10 isotopic forms. It can treat all ions of the elements up through Zn and the first 5 ions of heavier elements up through Es. The elemental and isotopic abundances are treated as variables with depth. The fluxes predicted by ATLAS12 are not accurate in intermediate or narrow bandpass intervals because the sample size is too small. A special stripped version of the spectrum synthesis program SYNTHE is used to generate the surface flux for the converged model using the line data on CD-ROMs 1 and 15. ATLAS12 can be used to produce improved models for Am and Ap stars. It should be very useful for investigating diffusion effects in atmospheres. It can be used to model exciting stars for H II regions with abundances consistent with those of the H II region. These programs and line files will be distributed on CD-ROMs.

Kurucz, Robert L.↗

NASA NTRS1986

Temperatures for hot and pulsating DB white dwarfs obtained with the IUE Observatory

Ultraviolet energy distributions are presented for 12 hot, helium-atmosphere DB white dwarfs, including the four known pulsating stars which define an empirical DB instability strip. The UV spectrophotometry is reported, and the energy distributions are matched with two separate grids of DB model atmosphere calculations, so that effective temperature estimates may be derived. The sources of uncertainty in the UV temperature fits are assessed, and a comparison with estimates from optical data is made.

Liebert, James↗

NASA NTRS2005

Stirling Analysis Comparison of Commercial Versus High-Order Methods

Recently, three-dimensional Stirling engine simulations have been accomplished utilizing commercial Computational Fluid Dynamics software. The validations reported can be somewhat inconclusive due to the lack of precise time accurate experimental results from engines, export control/proprietary concerns, and the lack of variation in the methods utilized. The last issue may be addressed by solving the same flow problem with alternate methods. In this work, a comprehensive examination of the methods utilized in the commercial codes is compared with more recently developed high-order methods. Specifically, Lele's compact scheme and Dyson's Ultra Hi-Fi method will be compared with the SIMPLE and PISO methods currently employed in CFD-ACE, FLUENT, CFX, and STAR-CD (all commercial codes which can in theory solve a three-dimensional Stirling model with sliding interfaces and their moving grids limit the effective time accuracy). We will initially look at one-dimensional flows since the current standard practice is to design and optimize Stirling engines with empirically corrected friction and heat transfer coefficients in an overall one-dimensional model. This comparison provides an idea of the range in which commercial CFD software for modeling Stirling engines may be expected to provide accurate results. In addition, this work provides a framework for improving current one-dimensional analysis codes.

Dyson, Rodger W.↗

NASA NTRS2007

Stirling Analysis Comparison of Commercial vs. High-Order Methods

Recently, three-dimensional Stirling engine simulations have been accomplished utilizing commercial Computational Fluid Dynamics software. The validations reported can be somewhat inconclusive due to the lack of precise time accurate experimental results from engines, export control/ proprietary concerns, and the lack of variation in the methods utilized. The last issue may be addressed by solving the same flow problem with alternate methods. In this work, a comprehensive examination of the methods utilized in the commercial codes is compared with more recently developed high-order methods. Specifically, Lele's Compact scheme and Dyson s Ultra Hi-Fi method will be compared with the SIMPLE and PISO methods currently employed in CFD-ACE, FLUENT, CFX, and STAR-CD (all commercial codes which can in theory solve a three-dimensional Stirling model although sliding interfaces and their moving grids limit the effective time accuracy). We will initially look at one-dimensional flows since the current standard practice is to design and optimize Stirling engines with empirically corrected friction and heat transfer coefficients in an overall one-dimensional model. This comparison provides an idea of the range in which commercial CFD software for modeling Stirling engines may be expected to provide accurate results. In addition, this work provides a framework for improving current one-dimensional analysis codes.

Dyson, Rodger W.↗

DOE OSTI2024

High- and Mid-Fidelity Modeling Comparison for a Floating Marine Turbine System

There is a lack of suitable numerical tools, particularly open-source tools, that can be used for designing and optimizing marine turbine systems. The National Renewable Energy Laboratory has added features to their widely used mid-fidelity wind turbine modeling code, OpenFAST, to enable modeling of axial-flow marine turbines. This necessitated the addition of several physical effects relevant to marine turbines that are neglected for wind turbines. These include buoyancy, added mass and inertial loads, wave-current superposition, and changes to the coordinate systems. This updated version of OpenFAST allows for the modeling of both fixed and floating marine turbines at a speed comparable to real time. While efficient for large sets of load cases and design studies, mid-fidelity codes make simplifying assumptions that may impact their accuracy. High-fidelity computational fluid dynamics (CFD) simulations can capture more flow effects with fewer assumptions and provide detailed body pressure mapping and flow-field information. It is important to compare predictions between mid-fidelity and high-fidelity codes, both to verify the models and to understand the limitations. A floating marine turbine system was modeled both with OpenFAST and with the commercial CFD code STAR-CCM+. The CFD model used a three-dimensional unsteady Reynolds-averaged Navier-Stokes solver for a volume-of-fluid numerical wave and current tank. The blade-resolved simulations used the sliding-interface technique for the spinning rotor and an overset grid to accommodate the rigid-body motion of the floating system. The mooring system was modeled with a custom coupling of the CFD solver with the open-source code MoorDyn. This improves upon the existing quasi-static catenary solver in STAR-CCM+, which lacks seabed contact or line-to-line connections. Simulation results for a floating marine turbine are compared between OpenFAST and CFD, highlighting the capabilities of the mid-fidelity code and identifying the areas where a high-fidelity approach is needed.

CFD↗

DOE OSTI2025

Convective shells in the interior of Cepheid variable stars: Overshooting models based on hydrodynamic simulations

Context. Because Cepheid variable stars have long been used as a cosmic benchmark for scaling distances in our Galaxy and beyond, the accuracy of stellar evolution models for Cepheids have wide-reaching effects. However, our understanding of the dynamics in the interiors of these physically complex stars is limited. Aims. Our goal is to provide a detailed multi-dimensional picture of hydrodynamic convection and convective boundary mixing in the interior of Cepheids. Methods. Using the Modules for Experiments in Stellar Astrophysics (MESA), we studied the structure of intermediate-mass stars that cross the instability strip. Then, we performed two-dimensional hydrodynamic simulations of six stars with the fully compressible Multidimensional Stellar Implicit Code (MUSIC). Our simulations did not model the radial pulsations but focused on the interior structure of this family of stars. We developed and applied a new statistical analysis to examine convection and convective boundary mixing in the interior of these stellar simulations. Results. Based on a grid of MESA models, we demonstrated that a common structure for intermediate mass Cepheids includes an interior convective shell as well as a thin outer convective envelope. Using the extreme value theory approach to analyze our MUSIC simulation data, we found that overshooting above the convective shell fills the space between these convectively unstable layers. We developed a new statistical analysis that provides a clearer picture of how overshooting fills this layer; it also allowed us to formulate a detailed comparison between overshooting above and below the convective shell. Our analysis effectively decomposes the overshooting layer into two layers: a weak overshooting layer and a strong overshooting layer. Statistically, this is accomplished by decomposing the strongly non-Gaussian probability density function into a mixture of gamma distributions. Using our mixture model, we showed that the ratio of overshooting lengths above and below the convective shell depends directly on the radial extent of the convective shell as well as its depth in the star. We proposed a new form for the diffusion coefficient that addresses the need for overlapping overshooting layers between convective shells. We introduced the idea of a “super-mixing layer” where overshooting from both the convective shell and the convective envelope results in efficient mixing and could be viewed as merging the two adjacent convective zones.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1974

Ultraviolet photometry from the orbiting astronomical observatory. XVI - The stellar Lyman-alpha absorption line

The stellar Lyman-alpha line at 1216 A was observed in 29 lightly reddened stars of spectral type B2.5 to B9 by a far-UV spectrophotometer on OAO-2. The equivalent widths obtained range from 15 A at type B2.5 to 65 A at type B8; in the late-B stars, the L-alpha line removes 2 to 3% of the total stellar flux. In this sampling, the strength of the L-alpha line correlates well with measures of the Balmer discontinuity and Balmer line strengths; luminosity classification does not seem to affect the line strength. The observed line widths also agree with the predictions of Mihala's grid of non-LTE model atmospheres. In some cases, the L-alpha line influences the interstellar column densities reported in the interstellar OAO-2 L-alpha survey. Hence, these data toward lightly reddened B2 and B1.5 stars should be regarded as upper limits only.

Savage, B. D.↗

DOE OSTI2022

On the inconsistency of [C/Fe] abundances and the fractions of carbon-enhanced metal-poor stars among various stellar surveys

Carbon-enhanced metal-poor (CEMP) stars are a unique resource for Galactic archaeology because they probe the properties of the First Stars, early chemical evolution, and binary interactions at very low metallicity. Comparing the fractions and properties of CEMP stars in different Galactic environments can provide us with unique insights into the formation and evolution of the Milky Way halo and its building blocks. In this work, we investigate whether directly comparing fractions of CEMP stars from different literature samples of very metal-poor [Fe/H] < -2.0 stars is valid. We compiled published CEMP fractions and samples of Galactic halo stars from the past 25 years, and find that they are not all consistent with each other. Focusing on giant stars, we find significant differences between various surveys when comparing their trends of [Fe/H] versus [C/Fe] and their distributions of CEMP stars. To test the role of the analysis pipelines for low-resolution spectroscopic samples, we re-analysed giant stars from various surveys with the sspp and ferre pipelines. We found systematic differences in [C/Fe] of ~0.1-0.4 dex, partly independent of degeneracies with the stellar atmospheric parameters. These systematics are likely due to the different pipeline approaches, different assumptions in the employed synthetic grids, and/or the comparison of different evolutionary phases. We conclude that current biases in (the analysis of) very metal-poor samples limit the conclusions one can draw from comparing different surveys. We provide some recommendations and suggestions that will hopefully aid the community to unlock the full potential of CEMP stars for Galactic archaeology.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1990

The horizontal-branch stars in globular clusters. I - The period-shift effect, the luminosity of the horizontal branch, and the age-metallicity relation

Synthetic models of the horizontal branches in globular clusters are constructed from a grid of the standard horizontal branch evolutionary tracks. The models are used to study the period shifts at constant T(eff) between RR Lyrae variables in globular clusters of different metallicities and the variation in horizontal-branch luminosity with the Fe/H ratio. The results suggest that the observed differences in the mean periods of the ab variables and the fraction of c-type variables between the two Oosterhoff groups are caused by a difference in the mean luminosity of the ab variables of about 0.18 bolometric mass and by the uneven distribution of variables across the instability strip in the group II clusters.

Lee, Young-Wook↗

DOE OSTI2023

Systematics in asteroseismic modelling: application of a correlated noise model for oscillation frequencies

ABSTRACT The detailed modelling of stellar oscillations is a powerful approach to characterizing stars. However, poor treatment of systematics in theoretical models leads to misinterpretations of stars. Here, we propose a more principled statistical treatment for the systematics to be applied to fitting individual mode frequencies with a typical stellar model grid. We introduce a correlated noise model based on a Gaussian process (GP) kernel to describe the systematics given that mode frequency systematics are expected to be highly correlated. We show that tuning the GP kernel can reproduce general features of frequency variations for changing model input physics and fundamental parameters. Fits with the correlated noise model better recover stellar parameters than traditional methods that either ignore the systematics or treat them as uncorrelated noise.

Li, Tanda (ORCID:0000000163962563)↗

NASA NTRS2000

The spectrum of TMR-1C is consistent with a background star

...This paper presents near-infrared grism spectroscopy to constrain the efective temperature of TMR-1C, obtained with the Near-Infrared Camera (NIRC) at Keck Observatory. To interpret the data, we construct a grid of extincted M dwarf spectra to compare with the low-resolution (RD120) NIRC spectrum. The assumed extinction corresponds to standard interstellar dust. With the additional assumption that no near-infrared dust excess contributes to the spectrum, then M4.5 is the latest spectral type TMR-1C can have within the uncertainties. ...

Padgett, D. L.↗

NASA NTRS1980

Flux distributions and colors of accretion disks

The disk model of Shakura and Sunyaev (1973) and Novikov and Thorne (1973) is used to calculate temperature distributions and integrated spectral fluxes for disks around a typical white dwarf and a typical neutron star, under the assumption that each element of the disk locally radiates as a blackbody. In addition, the disks' integrated UBV colors are calculated using the grid colors for real model atmospheres calculated by Buser and Kurucz (1978) and the observed colors given by Allen (1973). In all the calculations the effect of radiation from one part of the disk on all the other parts is included.

Pacharintanakul, P.↗

NASA NTRS1983

The Eddington limit and supercritical accretion. II - Time-dependent calculations

Spherically symmetric, time-dependent accretion of an ionized hydrogen plasma onto a neutron star is calculated for accretion rates in excess of the Eddington limit. The coupled hydrodynamic and frequency integrated radiative transfer equations are solved on an Eulerian grid for these supercritical accretion flows. Our results indicate that steady state flows are limited to rates at or below the critical rate, with emergent luminosities equal to or less than the Eddington luminosity. Initially supercritical accretion rates generate a large pulse of radiation which reduces the accretion rate to the critical value and produces an extended quasi-static envelope.

Burger, H. L.↗

NASA NTRS1996

Research on Spectroscopy, Opacity, and Atmospheres

Kurucz, Robert L.↗