Critical currents and scaling laws in sputtered copper molybdenum sulfide
Explore the source record for details and available documents.
Alterovitz, S. A.↗
SEARCH · Search NASA
Results for “Scaling laws”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Scaling laws and edge effects for polymer surface discharges
Specimens of Mylar sheet were exposed to a 20 kV electron beam. The resulting surface discharge arcs were photographed and the discharge current into a metal backing plate measured as a function of time. The area of the Mylar sheet was defined by a round aperture in a close-fitting metal mask, and the current pulse characteristics were plotted against area on log-log paper. The plots appear as straight lines (due to power-law behavior) with slopes of 0.50 for the peak current, 1.00 for the charge released, 1.49 for the energy and 0.55 for the pulse duration. Evidence is presented for the occurrence of banded charge distributions near grounded edges, on both Teflon and Mylar.
Balmain, K. G.↗
Critical current and scaling laws in evaporated two-phase Cu2.5Mo6S8
Explore the source record for details and available documents.
Alterovitz, S. A.↗
Cratering experiments in sands and a trial for general scaling law
The results of the vertical impacts of aluminum projectiles into quartz sand are reported. The impacts are at velocities of 35 to 830 m/sec with a single-stage powder gun. The morphology of craters formed in loose sands is generally conical, whereas that of craters formed in self-compacted sands varies with increasing impact velocity from a flat-floor type to a double-ring type. The present data, together with previous experimental data and the 'late-stage equivalence' of Dienes and Walsh, are seen as indicating that the crater diameter is expressed by a function of the 'late-stage effective energy' but not of the impact kinetic energy. The diameter of a crater formed in a noncohesive sand is found to be proportional to one-fourth the power of the late-state effective energy. For general impact cratering in a target with a finite strength, a relation is given between the velocity and the diameter, suggesting that there are four regimes in the crater diameter versus kinetic energy relation.
Mizutani, H.↗
Scaling laws for testing airfoils under heavy rainfall
Explore the source record for details and available documents.
Bilanin, Alan J.↗
Coronal heating by the resonant absorption of Alfven waves - Importance of the global mode and scaling laws
Numerical simulations of the MHD equations for a fully compressible, low-beta, resistive plasma are used to study the resonance absorption process for the heating of coronal active region loops. Comparisons with more approximate analytic models show that the major predictions of the analytic theories are, to a large extent, confirmed by the numerical computations. The simulations demonstrate that the dissipation occurs primarily in a thin resonance layer. Some of the analytically predicted features verified by the simulations are (a) the position of the resonance layer within the initial inhomogeneity; (b) the importance of the global mode for a large range of loop densities; (c) the dependence of the resonance layer thickness and the steady-state heating rate on the dissipation coefficient; and (d) the time required for the resonance layer to form. In contrast with some previous analytic and simulation results, the time for the loop to reach a steady state is found to be the phase-mixing time rather than a dissipation time. This disagreement is shown to result from neglect of the existence of the global mode in some of the earlier analyses. The resonant absorption process is also shown to behave similar to a classical driven harmonic oscillator.
Steinolfson, Richard S.↗
Scaling Laws for Impact Craters in Water
Tsunami waves from asteroid impacts into water are of concern from asteroids in the 200 m to 1 km diameter range because this spans the range from asteroids that will likely hit the surface and not airburst, but also be small enough that global climate effects will hopefully be minimal. Current estimates of impact tsunamis depend on either hydrocode simulations or on semi-analytical models. Unfortunately there is significant disagreement between these methods. One of the main reasons for the disparity is that the semi-analytical models such as Holsapple (1993) rely on experimental impacts into deep water. However for asteroids in the 200 - 1000 m range even the deep ocean basins can appear as shallow water impacts where the crater formed in the water reaches all the way to the sea floor. Another reason for the disparity arises from the linear interpolation of data across many orders of magnitude difference between Froude number (ratio of kinetic to gravitational energy) used in the laboratory experiments and what would be seen in an asteroid impact. The Gault & Sonett (1982) experiment shot millimeter sized glass spheres into water at 1 to 6 km/s and the Olevson (1969) experiment dropped millimeter sized water drops at a few meters per second. The goal of this work was to fill in the gaps and conduct experiments and simulations at the correct Froude numbers of interest, and in both deep and shallow water, to help resolve the disparity and extend the semi-analytical models.
Robertson, Darrel↗
Adversarial Robustness Limits via Scaling-Law and Human-Alignment Studies
Explore the source record for details and available documents.
Computer science↗
Structural similitude and design of scaled down laminated models
The excellent mechanical properties of laminated composite structures make them prime candidates for wide variety of applications in aerospace, mechanical and other branches of engineering. The enormous design flexibility of advanced composites is obtained at the cost of large number of design parameters. Due to complexity of the systems and lack of complete design based informations, designers tend to be conservative in their design. Furthermore, any new design is extensively evaluated experimentally until it achieves the necessary reliability, performance and safety. However, the experimental evaluation of composite structures are costly and time consuming. Consequently, it is extremely useful if a full-scale structure can be replaced by a similar scaled-down model which is much easier to work with. Furthermore, a dramatic reduction in cost and time can be achieved, if available experimental data of a specific structure can be used to predict the behavior of a group of similar systems. This study investigates problems associated with the design of scaled models. Such study is important since it provides the necessary scaling laws, and the factors which affect the accuracy of the scale models. Similitude theory is employed to develop the necessary similarity conditions (scaling laws). Scaling laws provide relationship between a full-scale structure and its scale model, and can be used to extrapolate the experimental data of a small, inexpensive, and testable model into design information for a large prototype. Due to large number of design parameters, the identification of the principal scaling laws by conventional method (dimensional analysis) is tedious. Similitude theory based on governing equations of the structural system is more direct and simpler in execution. The difficulty of making completely similar scale models often leads to accept certain type of distortion from exact duplication of the prototype (partial similarity). Both complete and partial similarity are discussed. The procedure consists of systematically observing the effect of each parameter and corresponding scaling laws. Then acceptable intervals and limitations for these parameters and scaling laws are discussed. In each case, a set of valid scaling factors and corresponding response scaling laws that accurately predict the response of prototypes from experimental models is introduced. The examples used include rectangular laminated plates under destabilizing loads, applied individually, vibrational characteristics of same plates, as well as cylindrical bending of beam-plates.
Simitses, G. J.↗
Gyrodampers for large space structures
The problem of controlling the vibrations of a large space structures by the use of actively augmented damping devices distributed throughout the structure is addressed. The gyrodamper which consists of a set of single gimbal control moment gyros which are actively controlled to extract the structural vibratory energy through the local rotational deformations of the structure, is described and analyzed. Various linear and nonlinear dynamic simulations of gyrodamped beams are shown, including results on self-induced vibrations due to sensor noise and rotor imbalance. The complete nonlinear dynamic equations are included. The problem of designing and sizing a system of gyrodampers for a given structure, or extrapolating results for one gyrodamped structure to another is solved in terms of scaling laws. Novel scaling laws for gyro systems are derived, based upon fundamental physical principles, and various examples are given.
Aubrun, J. N.↗
Estimates of crater size for large-body impact Gravity-scaling results
A scaling analysis based upon dimensional invariance is used in conjunction with centrifuge experiments to estimate cratering efficiency as a function of impact velocity for kilometer-sized impactors. Complementing earlier, conventional small-scale impact experiments, centrifuge experiments were performed to substantiate these scaling laws in a scaled-size regime of interest. This technique provided empirical scaling laws used to estimate crater size for large bodies impacting the earth. From these scaling laws a 10-km-diameter body impacting at 25 km/s would be expected to produce a 66-km-diameter crater and to inject approximately 12 times its mass into the atmosphere.
Schmidt, R. M.↗
Crater size estimates for large-body terrestrial impact
Calculating the effects of impacts leading to global catastrophes requires knowledge of the impact process at very large size scales. This information cannot be obtained directly but must be inferred from subscale physical simulations, numerical simulations, and scaling laws. Schmidt and Holsapple presented scaling laws based upon laboratory-scale impact experiments performed on a centrifuge (Schmidt, 1980 and Schmidt and Holsapple, 1980). These experiments were used to develop scaling laws which were among the first to include gravity dependence associated with increasing event size. At that time using the results of experiments in dry sand and in water to provide bounds on crater size, they recognized that more precise bounds on large-body impact crater formation could be obtained with additional centrifuge experiments conducted in other geological media. In that previous work, simple power-law formulae were developed to relate final crater diameter to impactor size and velocity. In addition, Schmidt (1980) and Holsapple and Schmidt (1982) recognized that the energy scaling exponent is not a universal constant but depends upon the target media. Recently, Holsapple and Schmidt (1987) includes results for non-porous materials and provides a basis for estimating crater formation kinematics and final crater size. A revised set of scaling relationships for all crater parameters of interest are presented. These include results for various target media and include the kinematics of formation. Particular attention is given to possible limits brought about by very large impactors.
Schmidt, Robert M.↗
Theoretical power-law relationship between permeability and formation factor
Permeability k and formation factor F are important petrophysical properties that have broad applications to reservoir engineering. Although well-log analysis has advanced reservoir characterizations, direct measurement of k is still not available. Accordingly, resistivity logs and more particularly formation factor have been frequently used to estimate k. In this study, we present a theoretical framework to relate k to F. We use power-law scaling from continuum percolation theory to develop a theoretic relationship between k and F, which is similar in form to a published power-law equation with empirical coefficients. Our result gives a physical interpretation to this empirical relationship. We also compare power-law scaling laws from percolation theory with data derived from experimental measurements and numerical simulations in the literature. Finally, using the Curve Fitting toolbox of MATLAB, the parameters of the power-law equations are determined, and the significance of the non-universal power laws are discussed.
42 ENGINEERING↗
Inertial Range Dynamics in Boussinesq Turbulence
L'vov and Falkovich have shown that the dimensionally possible inertial range scaling laws for Boussinesq turbulence, Kolmogorov and Bolgiano scaling, describe steady states with constant flux of kinetic energy and of entropy respectively. These scaling laws are treated as similarity solutions of the direct interaction approximation for Boussinesq turbulence. The Kolmogorov scaling solution corresponds to a weak perturbation by gravity of a state in which the temperature is a passive scalar but in which a source of temperature fluctuations exists. Using standard inertial range balances, the renormalized viscosity and conductivity, turbulent Prandtl number, and spectral scaling law constants are computed for Bolgiano scaling.
Rubinstein, Robert↗
Transverse Tension Fatigue Life Characterization Through Flexure Testing of Composite Materials
The transverse tension fatigue life of S2/8552 glass-epoxy and IM7/8552 carbon-epoxy was characterized using flexure tests of 90-degree laminates loaded in 3-point and 4-point bending. The influence of specimen polishing and specimen configuration on transverse tension fatigue life was examined using the glass-epoxy laminates. Results showed that 90-degree bend specimens with polished machined edges and polished tension-side surfaces, where bending failures where observed, had lower fatigue lives than unpolished specimens when cyclically loaded at equal stress levels. The influence of specimen thickness and the utility of a Weibull scaling law was examined using the carbon-epoxy laminates. The influence of test frequency on fatigue results was also documented for the 4-point bending configuration. A Weibull scaling law was used to predict the 4-point bending fatigue lives from the 3-point bending curve fit and vice-versa. Scaling was performed based on maximum cyclic stress level as well as fatigue life. The scaling laws based on stress level shifted the curve fit S-N characterizations in the desired direction, however, the magnitude of the shift was not adequate to accurately predict the fatigue lives. Furthermore, the scaling law based on fatigue life shifted the curve fit S-N characterizations in the opposite direction from measured values. Therefore, these scaling laws were not adequate for obtaining accurate predictions of the transverse tension fatigue lives.
OBrien, T. Kevin↗
Dissipative Floquet Dynamics: from Steady State to Measurement Induced Criticality in Trapped-ion Chains
Quantum systems evolving unitarily and subject to quantum measurements exhibit various types of non-equilibrium phase transitions, arising from the competition between unitary evolution and measurements. Dissipative phase transitions in steady states of time-independent Liouvillians and measurement induced phase transitions at the level of quantum trajectories are two primary examples of such transitions. Investigating a many-body spin system subject to periodic resetting measurements, we argue that many-body dissipative Floquet dynamics provides a natural framework to analyze both types of transitions. We show that a dissipative phase transition between a ferromagnetic ordered phase and a paramagnetic disordered phase emerges for long-range systems as a function of measurement probabilities. A measurement induced transition of the entanglement entropy between volume law scaling and sub-volume law scaling is also present, and is distinct from the ordering transition. The two phases correspond to an error-correcting and a quantum-Zeno regimes, respectively. The ferromagnetic phase is lost for short range interactions, while the volume law phase of the entanglement is enhanced. An analysis of multifractal properties of wave function in Hilbert space provides a common perspective on both types of transitions in the system. Our findings are immediately relevant to trapped ion experiments, for which we detail a blueprint proposal based on currently available platforms.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Casimir-Polder potential on an excited atom near an atomic array
We develop a microscopic description of the fluctuation-mediated Casimir-Polder (CP) shifts on a 'test' two-level atom placed near a two-dimensional atomic array of two-level atoms. We derive the resonant and off-resonant CP potentials experienced by the excited test atom using fourth-order perturbation theory, under the assumption that the test atom resonance is far detuned from those of the array atoms. The total potential on the test atom can be described as the sum of the pairwise resonant and off-resonant potentials resulting from its interaction with the individual atoms of the array. We analyze the asymptotic scaling of CP shifts as a function of the test atom-array separation, and its dependence on various system parameters: array spacing and size, and dipole orientation of the array atoms. Our results bridge the description of CP potential across two distinct regimes: (i) from a single-atom limit where we recover the well-known two-atom Van der Waals potential, (ii) to a macroscopic boundary limit, where we demonstrate new asymptotic scaling laws. We demonstrate that these scaling laws can be tuned via the microscopic parameters of the atomic array, establishing atomically-controlled arrays as a versatile platform for tailoring fluctuation-induced QED phenomena.
FOS: Physical sciences↗
Concepts and methods for describing critical phenomena in fluids
The predictions of theoretical models for a critical-point phase transistion in fluids, namely the classical equation with third-degree critical isotherm, that with fifth-degree critical isotherm, and the lattice gas, are reviewed. The renormalization group theory of critical phenomena and the hypothesis of universality of critical behavior supported by this theory are discussed as well as the nature of gravity effects and how they affect cricital-region experimentation in fluids. The behavior of the thermodynamic properties and the correlation function is formulated in terms of scaling laws. The predictions of these scaling laws and of the hypothesis of universality of critical behavior are compared with experimental data for one-component fluids and it is indicated how the methods can be extended to describe critical phenomena in fluid mixtures.
Sengers, J. V.↗