Search NASA⌕ Search

SEARCH · Search NASA

Results for “Science activities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Study of nitrogen incorporation into GaInNAs: The role of growth temperature in molecular beam epitaxy

GaInNAs has an important impact on developing GaAs-based optoelectronics and multijunction solar cells, but the complex nature of the nitrogen incorporation into GaInAs is still not fully understood. By combining x-ray diffraction, photoluminescence, reflection high-energy electron diffraction, and photoelectron spectroscopy measurements, we show that nitrogen incorporation is enhanced with increasing growth temperature in the range of 300-450 Degree-Sign C. We study the growth front and show that the surface reconstruction is (1 Multiplication-Sign 3) regardless of growth temperature in this range. The enhanced nitrogen incorporation can be modeled as a thermally activated process with activation energy of about 0.1 eV.

36 MATERIALS SCIENCE↗

Sensing response of copper phthalocyanine salt dispersed glass with organic vapours

Copper Phthalocyanine and other Metal Phthalocyanines are very flexible and tuned easily to modify their structural, spectroscopic, optical and electrical properties by either functionalizing them with various substituent groups or by replacing or adding a ligand to the central metal atom in the phthalocyanine ring and accordingly can be made sensitive and selective to various organic species or gaseous vapours. In the present work, we have dispersed Copper Phthalocyanine Salt (CuPcS) in sol-gel glass form using chemical route sol-gel method and studied its sensing mechanism with organic vapours like methanol and benzene and found that current increases onto their exposure with vapours. A variation in the activation energies was also observed with exposure of vapours.

36 MATERIALS SCIENCE↗

Simple Kinetic Monte Carlo Models for Dissolution Pitting Induced by Crystal Defects

The solid-on-solid kinetic Monte Carlo model of Lasaga and Blum for dislocation- controlled etch pit growth has been extended to the growth of etch pits under the control of multiple dislocations and point defects. This has required the development of algorithms that are 0(103) – O(104) times faster than primitive kinetic Monte Carlo models for surfaces with areas in the range 1024x1024 – 4096x4096 lattice sites. Simulations with multiple line defects indicate that the surface morphology coarsens with increasing time and that the coarsening is more pronounced for large bond-breaking activation energies. For small bond breaking activation energies dissolution enhanced by line defects perpendicular the dissolving surface results in pits with steep sides terminated by deep narrow hollow tubes (nanopipes). Larger bond breaking activation energies lead to shallow pits without deep nanopipes, and if the bond breaking activation energy is large enough, step flow is the primary dissolution mechanism, and pit formation is suppressed. Simplified models that neglect the far field strain energy density but include either a rapidly dissolving core or an empty core lead to results that are qualitatively similar to those obtained using models that include the effects of the far field stress and strain. Simulations with a regular array of line defects show that microscopic random thermal fluctuations play an important role in the coarsening process.

36 MATERIALS SCIENCE↗

Optimization of hot workability and microstructure control in a 12Cr-10Ni precipitation hardenable stainless steel: An approach using processing maps

Highlights: • Deformation processing map was developed for a 12Cr10Ni precipitation hardenable martensitic stainless steel and optimized hot working parameters were suggested to obtain defect free products. • The ‘stable’ domain of the processing maps were correlated to the dynamic recrystallization in the austenite phase and further confirmed by detailed microstructural investigations. • The DRx domain showed a refinement of the martensite packet size and of the prior transformation austenite grain size, essential to obtain the desired mechanical properties. - Abstract: Optimization of hot working parameters and corresponding microstructure control were explored in a 12Cr-10Ni precipitation hardenable martensitic stainless steel. From hot compression tests, 1073–1373 K (800°–1100 °C) and five (0.001–10 s{sup −1}) different strain rates, processing maps were developed, and various domains of microstructure evolution (in the austenite phase) were identified. The stable domain of the processing maps appeared to indicate dynamic recrystallization (DRx) in the austenite phase: as evident by the appearance of inflection point in the strain hardening rate versus flow stress plots. The suspected DRx domain was further confirmed by detailed microstructural investigations of the respective water-quenched specimens. The DRx domain showed a refinement of the martensite packet size and of the prior transformation austenite grain size. The later was shown with optical microstructure and reconstructed (modelled) microtexture data of the prior austenite grains. Additionally, the DRx domain showed a significant difference in activation energy as estimated from appropriate constitutive modelling.

36 MATERIALS SCIENCE↗

Synthesis, structural and dielectric properties of Ce-doped lead lanthanum titanate

Highlights: • The effect of Ce doping on the structural, dielectric properties and ac conductivity of Pb{sub 0.79-x}Ce{sub x}La{sub 0.21}TiO{sub 3} was studied. • A pseudo-cubic single phase was observed for all samples. • The phase transition temperature is found to decrease with increasing Ce content. • Change of the nature of Pb{sub 0.79}La{sub 0.21}TiO{sub 3} phase transition upon Ce-doping. • Several essential dielectric parameters were extracted. - Abstract: The influence of Ce doping on the structural, dielectric and ac conductivity properties of Pb{sub 0.79-x}Ce{sub x}La{sub 0.21}TiO{sub 3} powders (x = 0, 0.01, 0.03, 0.05 and 0.1) was investigated. X-ray diffraction shows that all samples have the pseudo-cubic crystal structure, in which the tetragonality and cell volume decrease with increasing Ce content. The change of the dielectric constant as a function of temperature demonstrates that the phase transition temperature decreases with the increase of Ce content. Normal behavior of the phase transition from ferroelectric to paraelectric was observed for Ce-doped samples, while the undoped powders exhibit a combination of diffuse phase transition and relaxor behaviors. From electrical conductivity versus 1/T plots, we have determined the activation energy, which was found to increase with increasing Ce concentration.

36 MATERIALS SCIENCE↗

The Effect of Mechanical Milling Period on Conductivity of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} System

One of the most important criteria in determining the best electrolyte is by obtaining good value of conductivity. In this research, Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} system will be prepared in order to find the optimum composition and heat treatment of the samples that gives good conductivity value. The effects of mechanical milling period on glass-ceramics electrolyte in the system Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5} have been investigated using X-Ray differential analysis and electrochemical impedance spectroscopy. Mechanical milling (MM) method was used to prepare the system which was converted into glass-ceramics by milled at several periods of time from 2 hours to 8 hours. Some crystalline phases with slight amorphous nature were detected in samples prepared by mechanical milling for 8 hours while single phase of LiTi{sub 2}(PO{sub 4}){sub 3} were obtained from samples that underwent further heat treatment. The sample treated at 250 deg. C for 4 hours obtained highest conductivity with a value of 1.12x10{sup 4} Scm{sup -1}. The activation energy was found to be as low as 0.08 eV.

36 MATERIALS SCIENCE↗

From anti-Arrhenius to Arrhenius behavior in a dislocation-obstacle bypass: Atomistic simulations and theoretical investigation

Dislocations are the primary carriers of plasticity in metallic materials. Understanding the basic mechanisms for dislocation movement is paramount to predicting the material mechanical response. Relying on atomistic simulations, we observe a transition from non-Arrhenius to Arrhenius behavior in the rate of an edge dislocation overcoming the long-range elastic interaction with a prismatic loop in tungsten. Close to the critical resolved shear stress, the process shows a non-Arrhenius behavior at low temperatures. However, as the temperature increases, the activation entropy starts to dominate, leading to a traditional Arrhenius-like behavior. Here, we have computed the activation entropy analytically along the minimum energy path following Schoeck’s method, which captures the cross-over between anti-Arrhenius and Arrhenius domains. Also, the Projected Average Force Integrator (PAFI), another simulation method to compute free energies along an initial transition path, exhibits considerable concurrence with Schoeck’s formalism. We conclude that entropic effects need to be considered to understand processes involving dislocations bypassing elastic barriers close to the critical resolved shear stress. More work needs to be performed to fully understand the discrepancies between Schoeck’s and PAFI compared to molecular dynamics.

36 MATERIALS SCIENCE↗

Influence of bias voltage and temperature on charge transfer states in organic photovoltaic and electroluminescent integrated device

Based on the organic photovoltaic (PV) and electroluminescent (EL) integrated device with a structure of SubPc/C{sub 60} heterojunction, both PV and EL properties of charge transfer states (CTSs) were simultaneously investigated. By means of infrared and visible isolating method, the EL characteristics of CTSs and singlet-triplet excitons were separated, and their properties dependence on bias voltage and temperature was analyzed by introducing modified diode models. From the simulation on the emissive photons from CTSs, the temperature independent parameters of CTSs were extracted, which have close relationship with thermal activation energy and effective emissive state number of CTSs at the SubPc/C{sub 60} interface.

36 MATERIALS SCIENCE↗

SU-E-J-144: Low Activity Studies of Carbon 11 Activation Via GATE Monte Carlo

Purpose: To investigate the behavior of a Monte Carlo simulation code with low levels of activity (∼1,000Bq). Such activity levels are expected from phantoms and patients activated via a proton therapy beam. Methods: Three different ranges for a therapeutic proton radiation beam were examined in a Monte Carlo simulation code: 13.5, 17.0 and 21.0cm. For each range, the decay of an equivalent length{sup 11}C source and additional sources of length plus or minus one cm was studied in a benchmark PET simulation for activities of 1000, 2000 and 3000Bq. The ranges were chosen to coincide with a previous activation study, and the activities were chosen to coincide with the approximate level of isotope creation expected in a phantom or patient irradiated by a therapeutic proton beam. The GATE 7.0 simulation was completed on a cluster node, running Scientific Linux Carbon 6 (Red Hat©). The resulting Monte Carlo data were investigated with the ROOT (CERN) analysis tool. The half-life of{sup 11}C was extracted via a histogram fit to the number of simulated PET events vs. time. Results: The average slope of the deviation of the extracted carbon half life from the expected/nominal value vs. activity showed a generally positive value. This was unexpected, as the deviation should, in principal, decrease with increased activity and lower statistical uncertainty. Conclusion: For activity levels on the order of 1,000Bq, the behavior of a benchmark PET test was somewhat unexpected. It is important to be aware of the limitations of low activity PET images, and low activity Monte Carlo simulations. This work was funded in part by the Philips corporation.

60 APPLIED LIFE SCIENCES↗

Reconfigurable structure and tunable transport in synchronized active spinner materials

Ensembles of actuated colloids are excellent model systems to explore emergent out-of-equilibrium structures, complex collective dynamics, and design rules for the next generation materials. Here, we demonstrate that ferromagnetic microparticles suspended at an air-water interface and energized by an external rotating magnetic field spontaneously form dynamic ensembles of synchronized spinners in a certain range of the excitation field parameters. Each spinner generates strong hydrodynamic flows, and collective interactions of the multiple spinners promote a formation of dynamic lattices. On the basis of experiments and simulations, we reveal structural transitions from liquid to nearly crystalline states in this novel active spinner material and demonstrate that dynamic spinner lattices are reconfigurable, capable of self-healing behavior and that the transport of embedded inert cargo particles can be remotely tuned by the parameters of the external excitation field. Our findings provide insights into the behavior of active spinner materials with reconfigurable structural order and tunable functionalities.

36 MATERIALS SCIENCE↗

Characterizations on the microstructures of LiMn{sub 2}O{sub 4} prepared by a simple soft-chemical technique

LiMn{sub 2}O{sub 4} powders were prepared by a simple soft-chemical technique at different temperatures. X-ray diffraction and thermogravimetric analysis suggested that the material prepared at 800 deg. C was stoichiometric LiMn{sub 2}O{sub 4}, whereas those prepared at 600 and 700 deg. C were Li[Mn{sub 0.77}{sup 3+}Mn{sub 1.23}{sup 4+}]O{sub 4.115} and Li[Mn{sub 0.85}{sup 3+}Mn{sub 1.15}{sup 4+}]O{sub 4.075}. Several typical XRD peaks of the compounds were investigated with an aim to elucidate (i) the Li immigration to the 16d octahedral sites, (ii) the partial tetragonal phase transition of the material and (iii) the mean coherent domain size and microstrain. SEM study showed that the particle size of the materials increased with heating temperature. The activation energy for the material particle growth was determined as 30.4 kJ mol{sup -1}.

36 MATERIALS SCIENCE↗

Experimental and Modeling Studies for the Removal of Crystal Violet Dye from Aqueous Solutions using Eco-friendly Gracilaria corticata Seaweed Activated Carbon/Zn/Alginate Polymeric Composite Beads

This research article describes, an eco-friendly activated carbon prepared from the Gracilaria corticata seaweeds which was employed for the preparation of biodegradable polymeric beads for the efficient removal of crystal violet dye in an aqueous solution. The presence of chemical functional groups in the adsorbent material was detected using FTIR spectroscopy. The morphology and physical phases of the adsorbent materials were analyzed using SEM and XRD studies respectively. Batch mode dye adsorption behavior of the activated carbon/Zn/alginate polymeric beads was investigated as a function of dosage, solution pH, contact time, initial dye concentration and temperature. Maximum dye removal was observed at a pH of 5.0, 1 g of adsorbent dosage with 60 mg/L dye concentration, 50 min of contact time and at 30 °C. The equilibrium modeling studies were analyzed with Freundlich and Langmuir adsorption isotherms and the adsorption dynamics was predicted with Lagergren’s pseudo-first order, pseudo-second order equations and intra particle diffusion models. The process of dye removal followed a pseudo second-order kinetics rather than pseudo first order. The thermodynamic parameters like standard Gibbs free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined and the results imply that the adsorption process was spontaneous, endothermic and increases the randomness between the adsorbent and adsorbate. The results from the experimental and correlation data reveal that the Gracilaria corticata activated carbon/Zn/alginate polymeric beads have proved to be an excellent adsorbent material for the removal of CV dye.

36 MATERIALS SCIENCE↗

The variation in activity of recombination centers in silicon p-n structures under the conditions of acoustic loading

Using the method of differential coefficients of current-voltage characteristics, deep levels in the Cz-Si p-n structures are studied under the ultrasonic loading conditions (longitudinal waves of a frequency of 4-26 MHz and intensity as high as 0.6 W/cm{sup 2}). The levels with thermal activation energy of 0.44, 0.40, 0.37, 0.48, and 0.46 eV are revealed. It is assumed that these levels are associated with the E center, bistable B{sub S}O{sub 2i} complex, and interstitial atoms captured by dislocation loops, respectively. It is established that ultrasound induces an increase in the contribution to the recombination processes of shallower levels and a decrease in activation energy of defects. The possibility of acoustoinduced reversible reconstruction of the configuration of the B{sub S}O{sub 2i} complex is analyzed.

36 MATERIALS SCIENCE↗

New principles of self‐organization created through the interplay of DNA condensates, microtubules, and motors

Bioinspired design—which holds great promise for a new generation of materials that are robust to defects, scalable under green manufacture, environmentally responsive, and programmably reconfigurable—requires mastery over molecular self-organization. Yet, from its specific mechanisms to most general architectures, the principles governing self-organization remain poorly understood and not even fully enumerated. For living systems, one obvious architectural principle is the modular reuse of a few simple molecular components in myriad combinations to achieve more complex phenomena. For example, the mechanical tasks of a cell are driven by the nonequilibrium dynamics of cytoskeletal filaments and molecular motors—the same filaments and motors, reprogrammed by a variety of modulators, perform tasks ranging from cell movement to division. Similarly, many compartmentalization tasks are performed by liquid-like condensates of simple components, which act as membraneless organelles to localize particular molecules in space and time (e.g. for gene regulation or RNA processing). In a few cases, condensates combine and interact with the cytoskeleton to create still more complex phenomena, e.g. the nucleation of microtubule asters from the centrosome (a protein condensate) to form the mitotic spindle during cell division. Very little is known about the fundamental mechanisms of such filament-plus-condensate phenomena. Despite few examples, the landscape of behaviors that can be achieved through the combination of condensates, filaments, and motors appears vast. However, exploration has been hindered by a lack of systems that have sufficiently programmable and dynamically tunable interactions between component condensates, filaments, and motors. We proposed to combine programmable DNA condensates, filamentous microtubules, and light-controlled motors into self-organizing systems whose principles go beyond those that have been observed in nature. In one limit, our systems will use microtubules and motors to create the molecular analog of a network of roads, which will organize droplets of DNA condensates capable of carrying molecular cargo. DNA condensates coupled to motors will flow from one microtubule aster hub to another, with their direction and timing controlled by DNA circuits. In another limit, microtubules will swim through bulk DNA condensates and exhibit strong interactions with boundaries between different types of condensates. Microtubule swimmers will reflect, get trapped, or refract at boundaries, under a mechanical analog of the classical optical index of refraction. DNA condensates having different mechanical indexes of refraction will be used to construct the analog of optical lenses, so that microtubule swimmers can be manipulated like light—collimated, diffracted, focused, and sorted based on properties analogous to wavelength. These two limits define two new architectures, within which multiple new mechanistic principles for self-organization will be discovered and explored. To explore these architectures, the motor-based coupling between DNA condensates and filaments will be controlled in time and space through the use of opto-proteins that create reversible links between DNA condensates and motors upon illumination. For each principle of interest, patterns of light will create virtual experiments by defining patterns of activity where DNA condensates walk along filaments, or filaments swim through condensates, and patterns of inactivity which will serve either as controls, or as boundary conditions vital to create the desired phenomena. This research serves the goals of Basic Energy Sciences Biomolecular Material Program by elucidating the principles by which the emergent, nonequilibrium behavior of collections of DNA condensates, motors, and microtubules can be programmed by environmental light patterns to create complex motion and materials transport. Because DNA condensates can be readily coupled to virtually any high performance nanomaterial, from carbon nanotubes, to metal nanoparticles, to light harvesting systems, this work provides a path to the construction, self-maintenance and reconfiguration of materials relevant to the Department of Energy.

60 APPLIED LIFE SCIENCES↗

Implementation of New TPD Analysis Techniques in the Evaluation of Second Order Desorption Kinetics of Cyanogen from Cu(001)

The interactions of cyanide species with a copper (001) surface were studied with temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). Adsorbed cyanide species (CN{sub (a)}) undergo recombinative desorption evolving molecular cyanogen (C{sub 2}N{sub 2}). As the adsorbed CN species charge upon adsorption, mutually repulsive dipolar interactions lead to a marked desorption energy reduction with increasing CN{sub (a)} coverages. Two new TPD analysis approaches were developed, which used only accurately discernible observables and which do not assume constant desorption energies, E{sub d}, and pre-exponential values, v. These two approaches demonstrated a linear variation of E{sub d} with instantaneous coverage. The first approach involved an analysis of the variations of desorption peak asymmetry with initial CN coverages. The second quantitative approach utilized only temperatures and intensities of TPD peaks, together with deduced surface coverages at the peak maxima, also as a function of initial surface coverages. Parameters derived from the latter approach were utilized as initial inputs for a comprehensive curve fit analysis technique. Excellent fits for all experimental desorption curves were produced in simulations. The curve fit analysis confirms that the activation energy of desorption of 170-180 kJ/mol at low coverage decreases by up to 14-15 kJ/mol at CN saturation.

36 MATERIALS SCIENCE↗

Isothermal Solid-State Transformation Kinetics Applied to Pd/Cu Alloy Membrane Fabrication

In this work, time-resolved, in situ high-temperature X-ray diffraction (HT-XRD) was used to study the solid-state transformation kinetics of the formation of the fcc Pd/Cu alloy from Pd/Cu bi-layers for the purpose of fabricating sulfur tolerant Pd/Cu membranes for H2 separation. Thin layers of Pd and Cu (total ~15 wt% Cu) were deposited on porous stainless steel (PSS) with the electroless deposition method and annealed in H2 at 500, 550 and 600 C. The kinetics of the annealing process were successfully described by the Avrami nucleation and growth model showing that the annealing process was diffusion controlled and one dimensional. The activation energy for the solid-state transformation was 175 kJ/mol, which was similar to the activation energy of Pd-Cu bulk interdiffusion. Furthermore, the Avrami model was able to successfully describe the changes in permeance and activation energy observed in Pd/Cu alloy membranes during characterization as they were annealed at high temperatures.

36 MATERIALS SCIENCE↗

Degradation of triclosan and triclocarban and formation of transformation products in activated sludge using benchtop bioreactors

Highlights: • Benchtop bioreactors were run with activated sludge for 122 – 196 h. • Extended HRT and SRT and increased temperatures on TCS, TCC, and their byproducts were studied. • Prolonged HRT and SRT resulted in more efficient TCS and TCC removal. • Increases in reactor temperature improved TCS and TCC degradation. • Significant MeTCS formation was observed. Benchtop bioreactors were run aerobically with activated sludge samples collected from a large municipal wastewater treatment plant (WWTP) to understand how increased hydraulic retention time (HRT), sludge retention time (SRT), and varying treatment temperatures (21 °C and 30 °C) impact concentrations of the endocrine disrupting antimicrobials triclosan (TCS), triclocarban (TCC), and their transformation products. Samples from the reactors were collected periodically over a 122–196 h period and the solid and liquid fraction were separately quantitated for TCS, TCC, and methyltriclosan (MeTCS) and scanned qualitatively for six other transformation products. Results indicated that TCS, TCC and MeTCS were predominately associated with the solids fraction of the activated sludge with only nominal concentrations in the liquids fraction. TCS was degraded in the solids fraction, with increased rates at 30 °C (−0.0224 ± 0.007 h{sup −1}) when compared to reactors run at 21 °C (− 0.0170 ± 0.003 h{sup −1}). Conversely, TCC concentrations did not significantly change in solids samples from reactors run at 21 °C, while an increase in reactor temperature to 30 °C resulted in TCC degradation at an average rate of − 0.0158 ± 0.012 h{sup −1}. Additionally, MeTCS formation in the solids fraction was observed in three out of four reactors run - indicating a notable transformation of TCS. Qualitative appearance of 2,4-dichlorophenol and 4-chloroanaline was observed in the liquids fraction of all reactor samples. The remaining four qualitatively scanned compounds were not detected. These experiments demonstrate that increased HRT, SRT, and temperature result in enhanced removal of TCS and TCC from wastewater during the activated sludge process. Furthermore, a substantial formation of TCS into MeTCS was observed.

54 ENVIRONMENTAL SCIENCES↗

Microstructure, strengthening mechanisms and hot deformation behavior of an oxide-dispersion strengthened UFG Al6063 alloy

An ultrafine-grained Al6063/Al{sub 2}O{sub 3} (0.8 vol.%, 25 nm) nanocomposite was prepared via powder metallurgy route through reactive mechanical alloying and hot powder extrusion. Scanning electron microcopy, transmission electron microscopy, and back scattered electron diffraction analysis showed that the grain structure of the nanocomposite is trimodal and composed of nano-size grains (< 0.1 {mu}m), ultrafine grains (0.1-1 {mu}m), and micron-size grains (> 1 {mu}m) with random orientations. Evaluation of the mechanical properties of the nanocomposite based on the strengthening-mechanism models revealed that the yield strength of the ultrafine-grained nanocomposite is mainly controlled by the high-angle grain boundaries rather than nanometric alumina particles. Hot deformation behavior of the material at different temperatures and strain rates was studied by compression test and compared to coarse-grained Al6063 alloy. The activation energy of the hot deformation process for the nanocomposite was determined to be 291 kJ mol{sup -1}, which is about 64% higher than that of the coarse-grained alloy. Detailed microstructural analysis revealed that dynamic recrystallization is responsible for the observed deformation softening in the ultrafine-grained nanocomposite. - Highlights: Black-Right-Pointing-Pointer The strengthening mechanisms of Al6063/Al{sub 2}O{sub 3} nanocomposite were evaluated. Black-Right-Pointing-Pointer Hot deformation behavior of the nanocomposite was studied. Black-Right-Pointing-Pointer The hot deformation activation energy was determined using consecutive models. Black-Right-Pointing-Pointer The restoration mechanisms and microstructural changes are presented.

36 MATERIALS SCIENCE↗