Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitive data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Calibration and comparison of the NASA Lewis free-piston Stirling engine model predictions with RE-1000 test data

A free-piston Stirling engine performance code is being upgraded and validated at the NASA Lewis Research Center under an interagency agreement between the Department of Energy's Oak Ridge National Laboratory and NASA Lewis. Many modifications were made to the free-piston code in an attempt to decrease the calibration effort. A procedure was developed that made the code calibration process more systematic. Engine-specific calibration parameters are often used to bring predictions and experimental data into better agreement. The code was calibrated to a matrix of six experimental data points. Predictions of the calibrated free-piston code are compared with RE-1000 free-piston Stirling engine sensitivity test data taken at NASA Lewis. Reasonable agreement was obtained between the code prediction and the experimental data over a wide range of engine operating conditions.

Geng, Steven M.↗

Low Boom Configuration Analysis with FUN3D Adjoint Simulation Framework

Off-body pressure, forces, and moments for the Gulfstream Low Boom Model are computed with a Reynolds Averaged Navier Stokes solver coupled with the Spalart-Allmaras (SA) turbulence model. This is the first application of viscous output-based adaptation to reduce estimated discretization errors in off-body pressure for a wing body configuration. The output adaptation approach is compared to an a priori grid adaptation technique designed to resolve the signature on the centerline by stretching and aligning the grid to the freestream Mach angle. The output-based approach produced good predictions of centerline and off-centerline measurements. Eddy viscosity predicted by the SA turbulence model increased significantly with grid adaptation. Computed lift as a function of drag compares well with wind tunnel measurements for positive lift, but predicted lift, drag, and pitching moment as a function of angle of attack has significant differences from the measured data. The sensitivity of longitudinal forces and moment to grid refinement is much smaller than the differences between the computed and measured data.

Park, Michael A.↗

Sensitivity Analysis of ProSEDS (Propulsive Small Expendable Deployer System) Data Communication System

This paper discusses analytical approaches to evaluating performance of Spacecraft On-Board Computing systems, thereby ultimately achieving a reliable spacecraft data communications systems. The sensitivity analysis approach of memory system on the ProSEDS (Propulsive Small Expendable Deployer System) as a part of its data communication system will be investigated. Also, general issues and possible approaches to reliable Spacecraft On-Board Interconnection Network and Processor Array will be shown. The performance issues of a spacecraft on-board computing systems such as sensitivity, throughput, delay and reliability will be introduced and discussed.

Park, Nohpill↗

Data analysis for dual-polarized communication link experiments

The effect of the propagation medium on the performance of dual-polarized radio links operating in the microwave and millimeter wave regions is analyzed, with particular reference to rain and ice depolarization. Three methods of displaying measured cross-polarization discrimination (XPD) versus the attenuation (A) are examined: mean, median, and equiprobable. The mean and median values are shown to be essentially the same, while equiprobable data are sensitive to many errors. Ice depolarization alone or imbedded in rain depolarization can shift the entire XPD vs A relationship for equiprobable data. It is concluded that XPD vs A sets from different experiments can be compared with confidence when mean and median values are used. However, caution must be exercised with equipotential data sets, particularly when ice effects are involved.

Stutzman, W. L.↗

Recent advances in radar remote sensing of forest

On a global scale, forests represent most of the terrestrial standing biomass (80 to 90 percent). Thus, natural and anthropogenic change in forest covers can have major impacts not only on local ecosystems but also on global hydrologic, climatic, and biogeochemical cycles that involve exchange of energy, water, carbon, and other elements between the earth and atmosphere. Quantitative information on the state and dynamics of forest ecosystems and their interactions with the global cycles appear necessary to understand how the earth works as a natural system. The information required includes the lateral and vertical distribution of forest cover, the estimates of standing biomass (woody and foliar volume), the phenological and environmental variations and disturbances (clearcutting, fires, flood), and the longer term variations following deforestation (regeneration, successional stages). To this end, seasonal, annual, and decadal information is necessary in order to separate the long term effects in the global ecosystem from short term seasonal and interannual variations. Optical remote sensing has been used until now to study the forest cover at local, regional, and global scales. Radar remote sensing, which provides recent SAR data from space on a regular basis, represents an unique means of consistently monitoring different time scales, at all latitudes and in any atmospheric conditions. Also, SAR data have shown the potential to detect several forest parameters that cannot be inferred from optical data. The differences--and complementarity--lie in the penetration capabilities of SAR data and their sensitivity to dielectric and geometric properties of the canopy volume, whereas optical data are sensitive to the chemical composition of the external foliar layer of the vegetation canopy.

Letoan, Thuy↗

Gamma-Ray Urgent Archiver for Novel Opportunities (GUANO): Swift/BAT Event Data Dumps on Demand to Enable Sensitive Subthreshold GRB Searches

We introduce a new capability of the Neil Gehrels Swift Observatory to provide event-level data from the Burst Alert Telescope (BAT) on demand in response to transients detected by other instruments. We show that the availability of these data can effectively increase the rate of detections and arcminute localizations of gamma-ray bursts (GRB) like GRB 170817 by >400%. We describe an autonomous spacecraft-commanding pipeline purpose built to enable this science; to our knowledge, this is the first fully autonomous extremely low-latency commanding of a space telescope for scientific purposes. This pipeline has been successfully run in its complete form since 2020 January, and has resulted in the recovery of BAT event data for >800 externally triggered events to date (gravitational waves, GWs; neutrinos; GRBs triggered by other facilities; fast radio bursts; and very high-energy detections), now running with a success rate of ∼90%. We exemplify the utility of this new capability by using the resultant data to (1) set the most sensitive upper limits on prompt 1 s duration short GRB-like emission within ±15 s around the unmodeled GW burst candidate S200114f, and (2) provide an arcminute localization for short GRB 200325A and other bursts. We also show that using data from GUANO to localize GRBs discovered by other instruments, we can increase the net rate of arcminute-localized GRBs by 10%–20% per year. Along with the scientific yield of more sensitive searches for subthreshold GRBs, the new capabilities designed for this project will serve as the foundation for further automation and rapid target of opportunity capabilities for the Swift mission, and have implications for the design of future rapid-response space telescopes.

Aaron Tohuvavohu↗

Development of Buffet Forcing Functions Using Frequency-Dependent Coherence Factors

The current accepted approach to modeling launch vehicle transonic buffet environments is to acquire time-correlated unsteady pressure measurements at discrete locations on a model-scale wind-tunnel model and use these measurements to develop buffet forcing functions (BFFs).Part of the BFF development process is the application of coherence factors to account for the discrete nature of the pressure measurement used in the development of the BFFs. Presently, the Space Launch System (SLS) program divides the launch vehicle into distinct aerodynamic regions, within which, the coherence lengths are assumed to be constant. The coherence factors are computed by averaging the coherence function between sensors within the region over a specified frequency range. The present work validates and examines the impact of two proposed changes to the development of longitudinal coherence factors used in the development of launch vehicle BFFs. One change is to employ frequency-dependent coherence factors instead of coherence factors based on the mean of the coherence function. The second proposed change replaces the aerodynamic regions with a moving-segment approach that varies the calculated coherence lengths as a function of longitudinal location of the transducers. The impact of these approaches is examined using data from two rigid buffet model wind-tunnel tests: (1)a notional launch vehicle geometry through the comparison of discrete measurement-basedBFFs to loads developed by continuous integration of unsteady pressure sensitive paint data and (2) the SLS Block 1 Cargo vehicle configuration for which BFFs have been previously developed using less-mature methods. The trends from this examination of updated coherence factor approaches ultimately result in more intuitive results than currently-accepted coherence methods.

buffet, unsteady aerodynamics, launch vehicle, win↗

Development of Buffet Forcing Functions Using Frequency-Dependent Coherence Factors

The current accepted approach to modeling launch vehicle transonic buffet environments is to acquire time-correlated unsteady pressure measurements at discrete locations on a model-scale wind-tunnel model and use these measurements to develop buffet forcing functions (BFFs). Part of the BFF development process is the application of coherence factors to account for the discrete nature of the pressure measurement used in the development of the BFFs. Presently, the Space Launch System (SLS) program divides the launch vehicle into distinct aerodynamic regions, within which, the coherence lengths are assumed to be constant. The coherence factors are computed by averaging the coherence function between sensors within the region over a specified frequency range. The present work validates and examines the impact of two proposed changes to the development of longitudinal coherence factors used in the development of launch vehicle BFFs. One change is to employ frequency-dependent coherence factors instead of coherence factors based on the mean of the coherence function. The second proposed change replaces the aerodynamic regions with a moving-segment approach that varies the calculated coherence lengths as a function of longitudinal location of the transducers. The impact of these approaches is examined using data from two rigid buffet model wind-tunnel tests: (1) a notional launch vehicle geometry through the comparison of discrete measurement-based BFFs to loads developed by continuous integration of unsteady pressure sensitive paint data and (2) the SLS Block 1 Cargo vehicle configuration for which BFFs have been previously developed using less-mature methods. The trends from this examination of updated coherence factor approaches ultimately result in more intuitive results than currently-accepted coherence methods.

buffet↗

Algorithms for isolating worst case systematic data errors

Two separate algorithms are derived for testing filter sensitivity to systematic data errors. One algorithm provides the absolute minimum Euclidean norm data error for a given estimate component error. The second algorithm can be used to find the minimum norm data error which can be generated by restricted degree Legendre polynomials. A specific very long baseline interferometry (VLBI) baseline estimation is analyzed with the algorithm. It is found that the local vertical is the most sensitive component to error in the data space. The efficiency of a data error sequence linear in elevation angle is within 7% that of the absolute worst case sequence. Elevation angle dependent errors are explored and the special case of a mismodeled troposphere is treated.

Curkendall, D. W.↗

Direction angle sensitivity of agricultural field backscatter with AIRSAR data

This paper presents a study of the direction angle sensitivity of radar backscatter from agricultural fields. The direction angle is defined as the angle between the incident plane and the perpendicular to the field row direction. Previous studies have concentrated on comparing the backscatter of agricultural fields imaged with 0, 45, and 90 degree direction angles. In contrast, this study concentrates on the backscatter changes occurring when the direction angle is modified by a few degrees or even by fractions of a degree. This is possible by using the output of the NASA/JPL AIRSAR processor, in which sixteen independent frames are formed, each one corresponding to the same radar scene imaged with a slightly different squint angle. The studied data set is an agricultural area in La Mancha, Spain acquired in June and July 1991 during the EFEDA experiment. This paper describes the observed backscatter variations of the agricultural fields with direction angle measured at P, L, and C bands. As expected, the backscatter is maximum for a 0 degree direction angle. For several fields, the backscatter at P and L bands drops by more than 10 dB for a 5 degree change in direction angle. Furthermore, the sensitivity to the direction angle decreases with increasing vegetation. The variations in backscatter are compared with model predictions. One model, which agrees with scatterometer data, underestimates the observed backscatter variations with direction angle by more than 10 dB. It does not take into account the possible coherent component of the radar signal. We believe the strong direction sensitivity of agricultural field backscatter obtained with SAR data is due to a Bragg resonant effect, resulting in a strong coherent return when the direction angle is zero. The observations are then projected to the case of spaceborne SAR data.

Dubois, Pascale C.↗

Comparison of cloud amounts derived using GOES and Landsat data

A hybrid bispectral threshold method (HBTM) is presently used to compare cloud amounts derived from Landsat digital data over 22 regions having various cloud types with cloudiness information obtained from collocated, nearly-simultaneous 4 x 8-km GOES visible and IR data. A sensitivity analysis indicates that an rms underestimation of about 0.01 in clear sky reflectance by the HBTM increased the GOES cloud amount by 0.06, which is more than twice the decrese in cloud amount obtained by an equivalent increase in clear-sky reflectance. Landsat imagery and cloud properties derived from the Landsat data are used to explain how the partially cloud-filled GOES pixels were treated by the HBTM. It is found that the HBTM accounts for the effects of partially cloud-filled FOVs in most cases of the present study.

Minnis, Patrick↗

Longwave radiative transfer in the atmosphere

The reported investigation had the objective to develop an accurate radiative transfer model for the thermal infrared region using a quasi-random band model. It is intended to use this model to examine the sensitivity of the outgoing radiance and flux density to the perturbations of such meteorological parameters as the surface emittance and temperature, atmospheric water vapor distribution, cloud altitude and fractional cover, and the concentrations of other infrared active constituents. The outgoing infrared flux and limb darkening functions obtained from this model agree well with the satellite measured data. Important sensitivity parameters obtained agree with the results of the various empirical and theoretical models. It is concluded that the effect of cloud depth should be taken into account to obtain better agreement with the measured limb darkening functions.

Gupta, S. K.↗

An evaluation of Shuttle Entry Air Data System (SEADS) flight pressures - Comparisons with wind tunnel and theoretical predictions

The SEADS pressure data obtained from the Shuttle flight 61-C are analyzed in conjunction with the preflight database. Based on wind tunnel data, the sensitivity of the Shuttle Orbiter stagnation region pressure distribution to angle of attack and Mach number is demonstrated. Comparisons are made between flight and wind tunnel SEADS orifice pressure distributions at several points throughout the re-entry. It is concluded that modified Newtonian theory provides a good tool for the design of a flush air data system, furnishing data for determining orifice locations and transducer sizing. Ground-based wind tunnel facilities are capable of providing the correction factors necessary for the derivation of accurate air data parameters from pressure data.

Henry, M. W.↗

Utilization of Satellite Data in Land Surface Hydrology: Sensitivity and Assimilation

This paper investigates the sensitivity of potential evapotranspiration to input meteorological variables, viz- surface air temperature and surface vapor pressure. The sensitivity studies have been carried out for a wide range of land surface variables such as wind speed, leaf area index and surface temperatures. Errors in the surface air temperature and surface vapor pressure result in errors of different signs in the computed potential evapotranspiration. This result has implications for use of estimated values from satellite data or analysis of surface air temperature and surface vapor pressure in large scale hydrological modeling. The comparison of cumulative potential evapotranspiration estimates using ground observations and satellite observations over Manhattan, Kansas for a period of several months shows very little difference between the two. The cumulative differences between the ground based and satellite based estimates of potential evapotranspiration amounted to less that 20mm over a 18 month period and a percentage difference of 15%. The use of satellite estimates of surface skin temperature in hydrological modeling to update the soil moisture using a physical adjustment concept is studied in detail including the extent of changes in soil moisture resulting from the assimilation of surface skin temperature. The soil moisture of the surface layer is adjusted by 0.9mm over a 10 day period as a result of a 3K difference between the predicted and the observed surface temperature. This is a considerable amount given the fact that the top layer can hold only 5mm of water.

Lakshmi, Venkataraman↗

Sensitivity Analysis Applied to Atomic Data Used for X-ray Spectrum Synthesis

A great deal of work has been devoted to the accumulation of accurate quantities describing atomic processes for use in analysis of astrophysical spectra. But in many situations of interest the interpretation of a quantity which is observed, such as a line flux, depends on the results of a modeling- or spectrum synthesis code. The results of such a code depends in turn on many atomic rates or cross sections, and the sensitivity of the observable quantity on the various rates and cross sections may be non-linear and if so cannot easily be derived analytically. This paper describes simple numerical experiments designed to examine some of these issues. Similar studies have been carried out previously in the context of solar UV lines by Gianetti et al. (2000); Savin & Laming (2002) and in the context of the iron M shell UTA in NGC 3783 by Netzer (2004).

Kallman, T.↗

Sensitivity Analysis Applied to Atomic Data Used for X-ray Spectrum Synthesis

A great deal of work has been devoted to the accumulation of accurate quantities describing atomic processes for use in analysis of astrophysical spectra. But in many situations of interest the interpretation of a quantity which is observed, such as a line flux, depends on the results of a modeling- or spectrum synthesis code. The results of such a code depends in turn on many atomic rates or cross sections, and the sensitivity of the observable quantity on the various rates and cross sections may be non-linear and if so cannot easily be derived analytically. This talk describes simple numerical experiments designed to examine some of these issues.

Kallman, T.↗

Multi-epoch Direct Imaging and Time-variable Scattered Light Morphology of the HD 163296 Protoplanetary Disk

We present H-band polarized scattered light imagery and JHK high-contrast spectroscopy of the protoplanetary disk around HD 163296 observed with the High-Contrast Coronographic Imager for Adaptive Optics (HiCIAO) and Subaru Coronagraphic Extreme Adaptive Optics (SCExAO)/Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS) instruments at Subaru Observatory. The polarimetric imagery resolve a broken ring structure surrounding HD 163296 that peaks at a distance along the major axis of 0 65 (66 au) and extends out to 0 98 (100 au) along the major axis. Our 2011 H-band data exhibit clear axisymmetry, with the NW and SE side of the disk exhibiting similar intensities. Our data are clearly different from 2016 epoch H-band observations of the Very Large Telescope (VLT)/Spectro-Polarimetric High-contrast Exoplanet REsearch (SPHERE), which found a strong 2.7 x asymmetry between the NW and SE side of the disk. Collectively, these results indicate the presence of time-variable, non-azimuthally symmetric illumination of the outer disk. While our SCExAO/CHARIS data are sensitive enough to recover the planet candidate identified from NIRC2 in the thermal infrared (IR), we fail to detect an object with JHK brightness nominally consistent with this object. This suggests that the candidate is either fainter in JHK bands than model predictions, possibly due to extinction from the disk or atmospheric dust/ clouds, or that it is an artifact of the data set/data processing, such as a residual speckle or partially subtracted disk feature. Assuming standard hot-start evolutionary models and a system age of 5Myr, we set new, direct mass limits for the inner (outer) Atacama Large Millimeter/submillimeter Array (ALMA)-predicted protoplanet candidate along the major (minor) disk axis of of 1.5 (2) M(J).

Evan A. Rich↗

Toward Enhancing the Use of IASI and CrIS Surface-Sensitive Radiances Over Land in the NASA GMAO GEOS Data Assimilation Framework

Assimilating surface-sensitive radiances over land is still challenging for both infrared (IR) and microwave (WV) radiances essentially because of the large uncertainties of the land physical surface emissivity model used in the Community Radiative Transfer Model (CRTM) and the uncertainties of land surface state properties. Currently very few IR radiances are assimilated over land. Large number of IR radiances are rejected by the surface sensitivity checks as well as the cloud detection check. In this study, we identified the appropriate Infrared Atmospheric Sounding Interferometer (IASI) and Cross-track Infrared Sounder (CrIS) surface-sensitive channels to retrieve Land Surface Temperature (LST). Then, we studied the impacts of these retrieved LST and retuned cloud detection on the simulation and assimilation of IASI and CrIS in the NASA GEOS in clear sky conditions. The preliminary results are shown to enhance the rate of IASI and CrIS assimilated channels over land. The impacts on the quality of the resulting analysis and subsequent forecast will be presented at the meeting.

Niama Boukachaba↗