Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sonic Boom Prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Application of CFD to sonic boom near and mid flow-field prediction

A three-dimensional parabolized Navier-Stokes (PNS) code has been used to calculate the supersonic overpressures from three different geometries at near- and mid-flow fields. Wind-tunnel data is used for code validation. Comparison of the computed results with different grid refinements is shown in this paper. It is observed that a large number of grid points is needed to resolve the tail shock/expansion fan interaction. Therefore, an adaptive grid approach is employed to calculate the flow field. The agreement between the numerical results and the wind-tunnel data confirms that computational fluid dynamics can be applied to the problem of sonic boom prediction.

Cheung, Samson H.↗
NASA NTRS2003

An Analysis of Measured Pressure Signatures From Two Theory-Validation Low-Boom Models

Two wing/fuselage/nacelle/fin concepts were designed to check the validity and the applicability of sonic-boom minimization theory, sonic-boom analysis methods, and low-boom design methodology in use at the end of the 1980is. Models of these concepts were built, and the pressure signatures they generated were measured in the wind-tunnel. The results of these measurements lead to three conclusions: (1) the existing methods could adequately predict sonic-boom characteristics of wing/fuselage/fin(s) configurations if the equivalent area distributions of each component were smooth and continuous; (2) these methods needed revision so the engine-nacelle volume and the nacelle-wing interference lift disturbances could be accurately predicted; and (3) current nacelle-configuration integration methods had to be updated. With these changes in place, the existing sonic-boom analysis and minimization methods could be effectively applied to supersonic-cruise concepts for acceptable/tolerable sonic-boom overpressures during cruise.

Mack, Robert J.↗
NASA NTRS2012

2012 Ground Testing Highlights

As part of the Fundamental Aeronautics Program and a collaborative effort with Boeing, and Lockheed Martin this past year a series of sonic boom test were completed in the NASA Ames Unitary Plan Wind Tunnel (UPWT). One of the goals was to develop new test techniques and hardware for measuring sonic boom signatures in the transonic and supersonic regimes. Data for various model designs and configurations were collected and will be used to validate CFD predictions of sonic boom signatures. Reactivation of the NASA Ames Mitsubishi compressor system was completed this past year. The compressor is intended to replace and augment the existing UPWT Clark Compressor as the primary Make Up Air (MUA) source. The MUA system provides air and vacuum pumping capability to the Ames UPWT. It will improve productivity and reliability of the UPWT as a vital testing and research facility for the U.S. aerospace industry and NASA. Funding for this task was provided from the American Recovery Investment Act (ARRA). Installation and validation of a Noncontact Stress Monitoring System (NSMS) for the 3-stage compressor was completed at the 11-foot Transonic Wind Tunnel. The system, originally developed at AEDC, consists of 36 pairs of LED light sources with optic beam send and receive probes along a 1-per rev signal. The new system allows for continuous monitoring and recording of compressor blade bending and torsion stress during normal test operations. A very unusual test was completed in the 11 FT TWT to acquire aerodynamic and flow field data for the Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS) to validate CFD methods and tools. Surface pressure distribution measurements and velocity measurements in the wake of the command module back to the drogues parachute location were acquired. Testing methods included Particle Image Velocimetry (PIV), Pressure Sensitive Paint (PSP), Schlieren Infrared Imaging (IR) and boundary layer survey and skin friction.

Buchholz, Steven J.↗
NASA NTRS1983

A comparison of measured and theoretical predictions for STS ascent and entry sonic booms

Sonic boom measurements have been obtained during the flights of STS-1 through 5. During STS-1, 2, and 4, entry sonic boom measurements were obtained and ascent measurements were made on STS-5. The objectives of this measurement program were (1) to define the sonic boom characteristics of the Space Transportation System (STS), (2) provide a realistic assessment of the validity of xisting theoretical prediction techniques, and (3) establish a level of confidence for predicting future STS configuration sonic boom environments. Detail evaluation and reporting of the results of this program are in progress. This paper will address only the significant results, mainly those data obtained during the entry of STS-1 at Edwards Air Force Base (EAFB), and the ascent of STS-5 from Kennedy Space Center (KSC). The theoretical prediction technique employed in this analysis is the so called Thomas Program. This prediction technique is a semi-empirical method that required definition of the near field signatures, detailed trajectory characteristics, and the prevailing meteorological characteristics as an input. This analytical procedure then extrapolates the near field signatures from the flight altitude to an altitude consistent with each measurement location.

Garcia, F., Jr.↗
NASA NTRSDate not supplied

Goal-Oriented Discretization Error Control in Coupled Nearfield-Farfield Low-Boom Simulations

The method of adjoint weighted residuals is used to determine the level of discretization error in loudness predictions of sonic booms on the ground. We analyze the standard nearfied-farfield domain decomposition approach. In the nearfield domain, the three-dimensional Euler equations are solved to obtain a pressure signature generated by the aircraft. In the farfield, this waveform is propagated through the atmosphere to the ground by solving the augmented Burgers’ equation. Loudness is characterized using weighted sound-exposure-level metrics. We formulate discretization error estimates for the ground signature and loudness metrics for this one-way coupled system. Although the nearfield solution is independent of the farfield, the adjoint formulation for the coupled system provides feedback from the farfield to identify high-error regions in the nearfield. The results demonstrate that the discrete adjoint implementation is asymptotically consistent and provides reliable error estimates. Furthermore, we show how the error can be controlled through adaptive refinement of the nearfield mesh. The approach is evaluated on two- and three-dimensional problems, including the X-59 flight demonstration aircraft.

CST↗
NASA NTRS1972

Sonic-boom propagation through a stratified atmosphere.

Theoretical approach to the problem of predicting the sonic-boom signature due to a maneuvering aircraft, with outline of the resulting calculation method. This method includes the effects of a variable, stratified atmosphere, and is based on geometric-acoustic principles. A nonlinear distortion is used to account for the weak shock field. The analytical results are compared with experimental data and excellent agreement was found, particularly with regard to signature length.

Hayes, W. D.↗
NASA NTRSDate not supplied

Estimating the Noise Floor of Sonic Boom Metrics Across the USA

NASA is building the X-59 Quiet Supersonic Technology aircraft to produce low noise sonic booms for a series of community noise surveys across the USA. Survey participants will rate their perception of the low booms from supersonic X-59 flyovers. Several noise metrics are proposed to quantify the noise dose: A-, B-, D-, E-weighted Sound Exposure Level, Stevens Perceived Level, and Indoor Sonic Boom Annoyance Predictor. Sparse measurements across the survey area will be used to estimate community noise exposure. The level of these low booms may be comparable to the ambient noise level in some locations, leading to uncertainty in noise exposure estimations. This uncertainty may necessitate increased reliance on sonic boom propagation predictions for exposure estimation. Low-boom signal to ambient noise ratio is one way to quantify uncertainty in measured sonic boom levels. An empirical relationship between A-weighted ambient level and sonic boom metric levels is used in conjunction with the National Park Service’s L50 SPL map to estimate sonic boom metric ambient levels across the USA. The estimate of ambient sonic boom metric levels will aid in X-59 test planning and execution.

sonic boom↗
NASA NTRS2021

Estimated Ambient Sonic Boom Metric Levels and X-59 Signal-to-Noise Ratios across the USA

NASA is building the X-59 Quiet Supersonic Technology aircraft to produce low noise sonic booms for a series of community noise surveys across the USA. Survey participants will rate their perception of the low-booms from supersonic X-59 flyovers. Several noise metrics are proposed to quantify the noise dose: A-, B-, D-, and E-weighted Sound Exposure Level, Stevens Perceived Level, and Indoor Sonic Boom Annoyance Predictor. Sparse measurements across the survey area will be used to estimate community noise exposure. The level of these low-booms may be comparable to the ambient noise level in some locations, leading to uncertainty in noise exposure estimations. This uncertainty may necessitate increased reliance on sonic boom propagation predictions for exposure estimation. Low-boom signal to ambient noise ratio is one way to quantify uncertainty in measured sonic boom levels. An empirical relationship between A-weighted ambient level and sonic boom metric levels is used in conjunction with the National Park Service’s L50 SPL map to estimate ambient noise levels expressed in terms of sonic boom noise metrics across the USA. These estimates of ambient levels will aid in X-59 community test planning and execution. The signal-to-noise ratio for the undertrack X-59 sonic boom is also estimated, and an example application of these data is presented for comparing potential noise monitor sites prior to a community noise test.

X-59↗
NASA NTRSDate not supplied

Uncertainty Quantification Methodology for Sonic Boom Loudness of a Low-Boom Supersonic Concept

This paper presents a comprehensive analysis of uncertainty quantification for sonic boom loudness metrics associated with the X-59 aircraft during its acoustic validation phase. The study focuses on employing advanced methodologies to characterize uncertainties in key sonic boom parameters predicted from a database derived from a computational fluid dynamics (CFD) solver. These methodologies include creating a polynomial chaos expansion (PCE) surrogate model, which is then used to run a Monte Carlo analysis to obtain 95% uncertainty intervals for sonic boom loudness parameters across the full carpet. Atmospheric uncertainties are rigorously considered, leveraging weather models based on historical data near Edwards Air Force Base to simulate potential flight conditions. The findings include preliminary uncertainty results for the full carpet during the validation phase of the Quesst mission. Additionally, a sensitivity study reveals that the primary sources of uncertainty are humidity and cruise weight.

Laura M. White↗
NASA NTRS1974

Sonic-boom measurements in the focus region during the ascent of Apollo 17

Sonic-boom pressure signatures recorded during the ascent phase of Apollo 17 are presented. The measurements were obtained onboard six U.S. Navy ships positioned along the ground track of the spacecraft vehicle in the area of expected focus resulting from the flight path and acceleration of the vehicle. Tracings of the measured signatures are presented along with values of the maximum positive overpressure, positive impulse, signature duration, and bowshock rise time. Also included are brief descriptions of the ships and their location, the deployment of the sonic-boom instrumentation, flight profiles and operating conditions for the launch vehicle and spacecraft, surface-weather and sea-state information at the measuring sites, and high-altitude weather information for the general measurement areas. Comparisons of the measured and predicted sonic-boom overpressures for the Apollo 17 mission are presented. The measured data are also compared with data from the Apollo 15 and 16 missions and data from flight test programs of various aircraft.

Henderson, H. R.↗
NASA NTRS1986

Sonic-boom research: Selected bibliography with annotation

Citations of selected documents are included which represent the state of the art of technology in each of the following subject areas: prediction, measurement, and minimization of steady-flight sonic booms; prediction and measurement of accelerating-flight sonic booms; sonic-boom propagation; the effects of sonic booms on people, communities, structures, animals, birds, and terrain; and sonic-boom simulator technology. Documents are listed in chronological order in each section of the paper, with key documents and associated annotation listed first. The sources are given along with acquisition numbers, when available, to expedite the acquisition of copies of the documents.

Hubbard, H. H.↗
NASA NTRS2002

Sonic Boom Testing Performed in NASA Glenn Research Center's 10- by 10-Foot Supersonic Wind Tunnel

One of the current impediments to the establishment of supersonic transports as a viable part of the commercial aviation fleet is the sonic boom effect. This effect is created when a vehicle achieves supersonic speeds and creates a shock wave (an immediate pressure change) that impinges on the ground. The resulting sonic boom can be both heard and felt on the ground, and it traverses the ground along the flight path of the vehicle. The environmental impact of this sonic boom effect is currently regulated by only allowing supersonic flight on over-water flight paths. The ability to measure the pressure signature of an aircraft configuration would allow researchers to identify the sources and the relative magnitude of that source on the aircraft pressure signature. It would also allow for the development and validation of computer codes to predict the sonic boom effects of an aircraft configuration.

Stark, David E.↗
NASA NTRS1990

Comparison of shock wave rise time prediction techniques

Two techniques for predicting sonic-boom rise times are described, and the values of the rise time (defined as the time required for the shock front to go from 10 percent to 90 percent of the maximum overpressure) predicted when using the two approaches are compared. The results are applied to the prediction of the rise time from two hypothetical supersonic transport aircraft. In both cases, the rise time predicted at the ground was much greater than that predicted for a conventional SST.

Raspet, Richard↗
NASA NTRS2008

Realism Assessment of Sonic Boom Simulators

Developments in small supersonic aircraft design are predicted to result in low-intensity sonic booms. Booms generated by current aircraft are similar to those that led to the ban on commercial supersonic fli ght over the US, so are unsuitable for parametric studies of psychoac oustic response to low-intensity booms. Therefore, simulators have be en used to study the impact of predicted low-intensity sonic booms. H owever, simulators have been criticized because, when simulating conv entional-level booms, the sounds were observed to be unrealistic by p eople experienced in listening to sonic booms. Thus, two studies were conducted to measure the perceived realism of three sonic boom simul ators. Experienced listeners rated the realism of conventional sonic boom signatures when played in these simulators. The effects on percei ved realism of factors such as duration of post-boom noise, exclusion of very low frequency components, inclusion of ground reflections, a nd type of simulator were examined. Duration of post-boom noise was f ound to have a strong effect on perceived realism, while type of simu lator had a weak effect. It was determined that post-boom noise had t o be at least 1.5 seconds long for the sound to be rated very realist ic. Loudness level did not affect realism for the range of sounds pla yed in the tests (80-93 dB ASEL).

Sullivan, Brenda M.↗
NASA NTRS1992

Comparison of jet plume shape predictions and plume influence on sonic boom signature

An Euler shock-fitting marching code yields good agreement with semiempirically determined plume shapes, although the agreement decreases somewhat with increasing nozzle angle and the attendant increase in the nonisentropic nature of the flow. Some calculations for the low boom configuration with a simple engine indicated that, for flight at altitudes above 60,000 feet, the plume effect is dominant. This negates the advantages of a low boom design. At lower altitudes, plume effects are significant, but of the order that can be incorporated into the low boom design process.

Barger, Raymond L.↗