Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source Term Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Source Term of Accidents Involving Vehicle Crashes and Fuel Fires

This calculation is to be used when developing accident analysis scenarios involving fuel fires at the WSF. The objectives of the calculation are to determine (1) the Source Term from releases of TRU waste involved in impacts, impacts with fuel fire, and fuel fire with no impact; and (2) the plume sensible heat from various sizes of gasoline pool fires.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Sensitivity Studies of the Inter-subchannel Mixing in Subchannel Analysis

In the PWR reactor core, the power profile is nonuniform and the inter-subchannel mixing is of great importance for flatting the temperature distribution of the coolant and for reactor core safety analysis. Subchannel codes are widely used in the reactor core safety analysis to assess the thermal hydraulic behavior of fuel assemblies. One of basic assumptions in subchannel analysis is that axial flow predominates in the channel flow. Under this assumption, the lateral momentum equation in subchannel codes can be simplified without bringing in significant errors. The inter-subchannel mixing leading to the exchange of mass, energy and momentum are modeled by adding source terms to the hydrodynamic equations or by separate models, and most of source terms and models are empirical correlations. With the advancement of mixing vane grid design, the lateral mixing has becoming a critical components in the evaluation of the inter-subchannel mixing in flow field. The accuracy of the subchannel analysis is strongly dependent on the modeling of inter-subchannel interactions between adjacent subchannels. So the inter-subchannel mixing models should be well considered and developed in subchannel analysis to better reflect their influence on flow field and temperature field in rod bundle. Generally speaking, the inter-subchannel mixing in subchannel analysis contains turbulent mixing and crossflow mixing in single phase flow. When it comes to two phase flow, the void drift will also contribute to inter-subchannel mixing [2]. Both the mechanisms and the generation conditions of each type of inter-subchannel mixing are different from each other. Turbulent mixing is a result of random turbulent flow and pressure fluctuations. Crossflow is caused by a net transverse pressure difference between adjacent subchannels. Lateral pressure differences can result from different subchannel hydraulic diameters, mass flux, heat flux distributions and changes in flow areas caused, for example, by wire wraps and spacer grids, respectively. Two-phase void drift is due to the tendency of the vapor phase to redistribute itself to a preferred equilibrium void distribution. This paper focuses on the sensitivity study of the inter-subchannel mixing with mixing vane grids for single phase flow in subchannel analysis. Both the turbulent mixing and crossflow mixing of the 5 x 5 rod bundle with mixing vane grids are predicted, and the results are compared and analyzed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Waste Inventory for Probabilistic Performance Assessment Modeling - 19361

Estimation of radioactive waste inventory is a key initial step in the development of an environmental fate and transport model for performance assessment (PA) of radioactive waste sites. PA model output is often sensitive to parameters that represent inventory as a source term, yet estimation is a difficult problem. Inventory estimation for a probabilistic performance assessment (PPA) is related to, but distinct from, that performed for waste excavation, characterization, and offsite disposal. The latter appropriately focuses on obtaining the most detailed information possible on specific hazards and locations; however, these questions cannot be fully answered without intrusive site characterization efforts. This type of characterization is often not feasible when assembling information regarding a source term in a PPA model. Development of waste inventory for a PPA is one piece of a larger hierarchical model. The physical process model represented by Goldsim computer code represents one level of the hierarchy, and the second level of the hierarchy involves estimation of inputs such as inventory, transport, and risk parameters. The estimation of inputs is not a straightforward problem. The parameters of a computer model often do not have an equivalence to the physical quantities they describe, and estimation of the physical quantities themselves can be difficult due to limitations of available information. Inventory information for the West Valley Site in upstate New York is based on data from historical shipping and disposal forms. In the 1990's, the West Valley Demonstration Project (WVDP) compiled information from existing databases and historical waste records into one complete modern database. A conceptual model was then applied and used with recorded information to characterize the waste mass and radionuclide composition for each waste burial. Information was ultimately aggregated over all waste records to estimate the mass of each radionuclide within each trench, hole, or caisson. Three decades later, we revisit the master database, make updates with newly-identified information, and incorporate the conceptual model previously used for inventory estimation in the hierarchical modeling framework. We characterize uncertainty using probability distributions for waste mass and radionuclide composition at the individual shipment or individual burial level. Uncertainty incorporated at the lowest level of the hierarchy is ultimately carried through to uncertainty in PPA model endpoints. Sensitivity analysis of early model results is then applied to identify influential inputs and guide subsequent efforts towards parameters that drive risk. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermochemical and transport properties important to molten salt reactor operation: Off-gas performance and the fission product mechanistic source term

The source term used in reactor performance and safety analysis requires understanding the chemical speciation and transport behavior of fission and activation products in the primary heat transport system (PHTS) and containment. As a starting condition, the transport models will use the isotopic compositions determined through ORIGEN (Bell 1973) calculations and thermochemistry that describes the speciation of the fuel, the salt, activation products and fission products. However, as changes in phase will be under non-equilibrium conditions, the source terms will also need models for the transport behavior of key compounds in the PHTS under various scenarios: normal operation with and without an off-gas system, maintenance, off-normal events, and severe reactor accidents. This document highlights those mechanistic behaviors for which models are needed. Simulations of reactor behavior require these models to be developed for molten salt reactors (MSRs), especially if not part of the suite used in describing LWR behavior. The document concludes with recommendations how to develop these models based on what is already known about reactor safety and fission product behavior.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Source Term of Accidents Involving Aircraft Crashes and Fuel Fires

This calculation is to be used when developing accident analysis scenarios involving aircraft fuel fires at the Waste Storage Facility (WSF). The objectives of the calculation are to determine (1) the Source Term from releases of TRU waste involved in impacts, impacts with fuel fire, and fuel fire with no impact; and (2) the plume sensible heat from various sizes of gasoline pool fires.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Conservative tightly-coupled simulations of stochastic multiscale systems

Multiphysics problems often involve components whose macroscopic dynamics is driven by microscopic random fluctuations. The fidelity of simulations of such systems depends on their ability to propagate these random fluctuations throughout a computational domain, including subdomains represented by deterministic solvers. When the constituent processes take place in nonoverlapping subdomains, system behavior can be modeled via a domain-decomposition approach that couples separate components at the interfaces between these subdomains. Its coupling algorithm has to maintain a stable and efficient numerical time integration even at high noise strength. We propose a conservative domain-decomposition algorithm in which tight coupling is achieved by employing either Picard's or Newton's iterative method. Coupled diffusion equations, one of which has a Gaussian white-noise source term, provide a computational testbed for analysis of these two coupling strategies. Fully-converged (“implicit”) coupling with Newton's method typically outperforms its Picard counterpart, especially at high noise levels. This is because the number of Newton iterations scales linearly with the amplitude of the Gaussian noise, while the number of Picard iterations can scale superlinearly. At large time intervals between two subsequent inter-solver communications, the solution error for single-iteration (“explicit”) Picard's coupling can be several orders of magnitude higher than that for implicit coupling. Increasing the explicit coupling's communication frequency reduces this difference, but the resulting increase in computational cost can make it less efficient than implicit coupling at similar levels of solution error, depending on the communication frequency of the latter and the noise strength. This trend carries over into higher dimensions, although at high noise strength explicit coupling may be the only computationally viable option.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved Understanding of Airborne Release Fraction and Respirable Fraction from Postulated Free-Fall Spill in DOE Nuclear Facilities (Annual Project Summary Report for NSRD-38)

The two-year experimental project has been completed to update the Airborne Release and Respirable Fraction (ARF and RF) estimates from the free-fall spills of liquid waste simulants. The objectives of the project at the Savannah River National Laboratory (SRNL) are to: (1) establish a technically defensible bounding approach for a reasonably conservative limit to the fall height used in the Ballinger correlation for the ARF, such that spill heights for near-water density liquid solutions above a critical height result in the same value of the ARF; and (2) provide a revised technical basis and data to support the ARF and RF correlation for free-fall liquid spills of heights from 1 to 10 meters. After peer review, these data and associated correlation will be available for consideration in a revision to DOE-HDBK-3010, Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ENDF/B-VII.0: Next Generation Evaluated Nuclear Data Library for Nuclear Science and Technology

Version 6 of the SCALE (Standardized Computer Analyses for Licensing Evaluation) code system was released in February 2009. SCALE provides a comprehensive, integrated package of modular programs and nuclear data for a wide range of applications, including reactor physics, criticality safety, shielding, sensitivity/uncertainty analysis, and isotopic transmutation and radiation source term determination. SCALE computational modules are executed by automated control sequences that prepare input and call the desired modules in a particular order, linking output from one calculation to the next in series. The SCALE lattice physics sequence TRITON generates few-group, assembly-homogenized cross sections, as a function of burnup and branch states, which can be input to core simulator codes. TRITON couples the ORIGEN-S depletion module with either the NEWT (NEW Transport algorithm) two-dimensional (2D) arbitrary-geometry transport code or the three-dimensional Monte Carlo KENO code. Fluxes from the transport solution, along with self-shielded multigroup (MG) cross sections, are passed to ORIGEN-S, which computes the time-dependent isotopic concentrations of more than 1400 nuclides. One of the major advancements in SCALE 6 is the availability of new nuclear data libraries based on ENDF/B-VII for neutron transport calculations. In this paper we describe the SCALE ENDF/B-VII (designated here as V7) libraries and present some validation results for critical benchmarks and isotopic depletion experiments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multiple-relaxation-time color-gradient lattice Boltzmann model for simulating two-phase flows with high density ratio

In this paper, we propose a color-gradient lattice Boltzmann (LB) model for simulating two-phase flows with high density ratio and high Reynolds number. The model applies a multi-relaxation-time (MRT) collision operator to enhance the stability of the simulation. A source term, which is derived by the Chapman-Enskog analysis, is added into the MRT LB equation so that the Navier-Stokes equations can be exactly recovered. Also, a new form of the equilibrium density distribution function is used to simplify the source term. To validate the proposed model, steady flows of a static droplet and the layered channel flow are first simulated with density ratios up to 1000. Small values of spurious velocities and interfacial tension errors are found in the static droplet test, and improved profiles of velocity are obtained by the present model in simulating channel flows. Then, two cases of unsteady flows, Rayleigh-Taylor instability and droplet splashing on a thin film, are simulated. In the former case, the density ratio of 3 and Reynolds numbers of 256 and 2048 are considered. The interface shapes and spike/bubble positions are in good agreement with the results of previous studies. In the latter case, the droplet spreading radius is found to obey the power law proposed in previous studies for the density ratio of 100 and Reynolds number up to 500.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selected Profiles of Burnup and Isotopic Concentrations in Pebble Bed High Temperature Reactor Fuel

Pebble Bed High Temperature Reactors (PB-HTRs) feature a unique fuel loading, burnup, and discharge process that is markedly different that a light water reactor or any other batch-loaded reactor that uses fixed fuel elements. During PB-HTR operation, small spherical fuel elements are dropped onto the top of the bed at small and regular intervals, 'trickle' through the core, and pass out of the core via a discharge chute at the bottom. Partially burnt pebbles are circulated back to the top of the core for another pass through the flux field. The process continues until the pebble achieves a specified discharge burnup. This results in high fuel utilization relative to a comparable batch-loaded fuel assembly which may or may not achieve full burnup depending upon where it is placed in the core. On the other hand, the radial and axial variation in the flux field and the random placement of each element on top of the bed mean that there will be a distribution of the final burnup and isotopic concentrations in spent fuel. This leads to some uncertainty in burnup analysis that has consequences for burnup monitoring (and thus efficient operation), source term quantification, and material accountability. The PEBBED code was developed specifically for the design and analysis of PB-HTRs. Although it is still under development, the code captures the important physics of cores fueled by dropping in, and if so configured, recirculating small graphite spheres in which the Tri-Isotropic (TRISO) coated particle fuel is embedded. In this study, the capabilities of the code for computing the isotopic contents of PBR fuel were exploited to examine and compare the variability of selected isotopes, in this case U-235, Pu-239, and Cs-137, in the fuel discharged from different PBR concepts. Results indicate the sensitivity of certain isotopes to the core geometry, mainly the presence of an inner reflector. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Validation of a Monte Carlo based depletion methodology via High Flux Isotope Reactor HEU post-irradiation examination measurements

The purpose of this study is to validate a Monte Carlo based depletion methodology by comparing calculated post-irradiation uranium isotopic compositions in the fuel elements of the High Flux Isotope Reactor (HFIR) core to values measured using uranium mass-spectrographic analysis. Three fuel plates were analyzed: two from the outer fuel element (OFE) and one from the inner fuel element (IFE). Fuel plates O-111-8, O-350-1, and I-417-24 from outer fuel elements 5-O and 21-O and inner fuel element 49-I, respectively, were selected for examination. Fuel elements 5-O, 21-O, and 49-1 were loaded into HFIR during cycles 4, 16, and 35, respectively (mid to late 1960s). Approximately one year after each of these elements were irradiated, they were transferred to the High Radiation Level Examination Laboratory (HRLEL) where samples from these fuel plates were sectioned and examined via uranium mass-spectrographic analysis. The isotopic composition of each of the samples was used to determine the atomic percent of the uranium isotopes. A Monte Carlo based depletion computer program, ALEPH, which couples the MCNP and ORIGEN codes, was utilized to calculate the nuclide inventory at the end-of-cycle (EOC). A current ALEPH/MCNP input for HFIR fuel cycle 400 was modified to replicate cycles 4, 16, and 35. The control element withdrawal curves and flux trap loadings were revised, as well as the radial zone boundaries and nuclide concentrations in the MCNP model. The calculated EOC uranium isotopic compositions for the analyzed plates were found to be in good agreement with measurements, which reveals that ALEPH/MCNP can accurately calculate burn-up dependent uranium isotopic concentrations for the HFIR core. The spatial power distribution in HFIR changes significantly as irradiation time increases due to control element movement. Accurate calculation of the end-of-life uranium isotopic inventory is a good indicator that the power distribution variation as a function of space and time is accurately calculated, i.e. an integral check. Hence, the time dependent heat generation source terms needed for reactor core thermal hydraulic analysis, if derived from this methodology, have been shown to be accurate for highly enriched uranium (HEU) fuel.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design of experiments and data analysis challenges in calibration for forensics applications

Forensic science aims to infer characteristics of source terms using measured observables. Our focus is on statistical design of experiments and data analysis challenges arising in nuclear forensics. More specifically, we focus on inferring aspects of experimental conditions (of a process to produce product Pu oxide powder), such as temperature, nitric acid concentration, and Pu concentration, using measured features of the product Pu oxide powder. The measured features, Y, include trace chemical concentrations and particle morphology such as particle size and shape of the produced Pu oxide power particles. Making inferences about the nature of inputs X that were used to create nuclear materials having particular characteristics, Y, is an inverse problem. Therefore, statistical analysis can be used to identify the best set (or sets) of Xs for a new set of observed responses Y. One can fit a model (or models) such as Υ = f(Χ) + error , for each of the responses, based on a calibration experiment and then “invert” to solve for the best set of Xs for a new set of Ys. This perspectives paper uses archived experimental data to consider aspects of data collection and experiment design for the calibration data to maximize the quality of the predicted Ys in the forward models; that is, we assume that well-estimated forward models are effective in the inverse problem. In addition, we consider how to identify a best solution for the inferred X, and evaluate the quality of the result and its robustness to a variety of initial assumptions, and different correlation structures between the responses. In addition, we also briefly review recent advances in metrology issues related to characterizing particle morphology measurements used in the response vector, Y.

36 MATERIALS SCIENCE↗

Fuel Matrix Degradation Model Development Update: Alloy Corrosion Rates and Hydrogen Generation

This work is being performed as part of the DOE NE Spent Fuel and Waste Science and Technology Campaign, Argillite and Crystalline Rock R&D work packages: SF-19AN01030101 and SF-19AN01030201. This document meets the milestone M4SF-19AN010301013 for Argillite R&D and the milestone M4SF-19AN010302013 for Crystalline R&D. The fuel matrix degradation (FMD) model calculates the degradation rate of spent UO2 fuel based on fundamental electrochemical theory and thermodynamics. The model provides the quantitative basis for radionuclide source term predictions in the generic disposal system analysis (GDSA) performance assessment (PA) model. The FMD model has been implemented in a manner that facilitates its integration with the GDSA-PA code and a preliminary, integrated FMD-GDSA model has been successfully tested (Jerden et al., 2017). The specific focus of on-going work is to accurately and quantitatively represent the generation of H2 in a breached waste package and its effect on the spent fuel degradation rate so that this key process can be accurately represented in PA models. It has been shown experimentally that millimolar concentrations of dissolved H2 in contact with spent fuel will inhibit oxidative dissolution and decrease the fuel degradation rates by as much as three orders of magnitude (e.g., Röllin et al., 2001, Ollila, 2008). This will lead to a significant decrease in the radionuclide source term values used in repository PA models. Sensitivity studies using the FMD model have shown that the dissolved H2 concentration is the dominant environmental variable affecting the UO2 spent fuel dissolution rate as long as a source of H2 persists in the breached waste package (Jerden et al., 2015). Therefore, on-going experimental and modeling efforts focus on H2 production, accumulation and interfacial reactions within a breached waste package. The anoxic corrosion of metallic engineering materials within a breached waste package will be the main source of H2 in crystalline and argillite rock repository systems. The most important H2-producing alloys present within a waste package include stainless steel, carbon steel, and aluminum alloys and the Zircaloy fuel cladding. A steel corrosion module was added to the FMD model to account for these H2 sources and couple the H2 generation rate with fuel degradation processes (Jerden et al., 2017). As discussed below, there is a need for experimental data from electrochemical corrosion tests to quantify the H2 generation rates due to the corrosion of these waste package alloys as a function of key environmental variables (Eh, pH, groundwater chemistry). This report presents results from series of electrochemical corrosion tests with materials present in waste packages that provide information needed to parameterize and validate the FMD model. The alloys tested include 316L stainless steel (316SS), AISI 4320 carbon steel (C-steel) and Zircaloy-4 fuel cladding (unirradiated). Potentiodynamic polarization and potentiostatic polarization tests were performed in buffer solutions at pH 4, 7 and 10 with NaCl concentrations of 0, 4 and 100 millimolar (mM). The potentiostatic tests were performed at voltages varying from 0.5 volts down to -0.66 volts, vs the standard hydrogen electrode (SHE), and all tests were performed at laboratory ambient temperatures (~22 °C). The corrosion rates measured during the electrochemical tests were used as direct input to a new FMD/in-package chemistry model that is being developed to provide accurate long-term spent fuel degradation rates as chemical conditions (Eh, pH, speciation) evolve within a breached waste package. This new model was developed by coupling the FMD model with the reactive transport code X1t, which is a module within the Geochemist’s Workbench (GWB) reaction path modeling code (Jerden et al., 2019). The reactive transport model consists of a 1D domain discretized with 21 reaction diffusion cells and includes a single waste packag

Jerden, James↗

Complex Sources and Impacts on Remediation and Monitoring Approaches

Remedy selection, implementation, and coordination with tank farm activities for adjacent waste sites need to be facilitated by a technically defensible description of sources and their relative strength and temporal contributions to groundwater contamination. Detailed data describing contaminant source releases are typically not available, so source locations are highly uncertain. Furthermore, data on sources and model parameters are not readily available through direct measurements. Instead, source data are often derived by extrapolation from a few direct and/or indirect measurements, while model parameters are commonly estimated using inverse modeling or calibration methods. Because the conceptual model of sources will influence the mass and timing of the flux of contaminants to groundwater, uncertainty in the source terms should be considered. Even though a best-fit model can often be identified, it may not be the best representation of the sources given the sparse, uncertain nature of the data used for estimating source terms. To support future feasibility studies, a systematic approach is needed for identifying remediation and monitoring activities appropriate under conditions of uncertainty. In this study, an integrated assessment of alternative conceptual model elements has been examined using the B-Complex site in the Hanford Central Plateau to demonstrate how multiple sources in a waste management complex can be described to identify their relative contributions to groundwater. The heterogeneous structure of the system is modeled based on available field information on the lithological data for both the vadose zone and aquifer. The approach includes a simulation assessment and linkages to site data, with an uncertainty analysis applied to evaluate the effects of source term uncertainty on contaminant mass flux to groundwater. An integrated assessment of alternative conceptual model elements was evaluated to identify how parameter uncertainty impacts both temporal and spatial uncertainties associated with vadose zone source terms. Modeling scenarios identify important characteristics of remediation target zones to provide context for how surface barriers, in situ remedies, and water-table treatment zones can be designed to account for source dynamics. Ramifications for remediation and monitoring are discussed within the context of the source term uncertainty. The described approach facilitates systematically addressing alternative conceptual model questions in relation to remediation and monitoring and supports the remedial investigation/ feasibility study process and the remediation strategy development for the Hanford Central Plateau.

Rockhold, Mark L.↗

Complex Sources and Impacts on Remediation and Monitoring Approaches - 19058

Remedy selection, implementation, and coordination with tank farm activities for adjacent waste sites need to be facilitated by a technically defensible description of sources and their relative strength and temporal contributions to groundwater contamination. Detailed data describing contaminant source releases are typically not available, so source locations are highly uncertain. Furthermore, data on sources and model parameters are not readily available through direct measurements. Instead, source data are often derived by extrapolation from a few direct and/or indirect measurements, while model parameters are commonly estimated using inverse modeling or calibration methods. Because the conceptual model of sources will influence the mass and timing of the flux of contaminants to groundwater, uncertainty in the source terms should be considered. Even though a best-fit model can often be identified, it may not be the best representation of the sources given the sparse, uncertain nature of the data used for estimating source terms. To support future feasibility studies, a systematic approach is needed for identifying remediation and monitoring activities appropriate under conditions of uncertainty. In this study, an integrated assessment of alternative conceptual model elements has been examined using the B-Complex site in the Hanford Central Plateau to demonstrate how multiple sources in a waste management complex can be described to identify their relative contributions to groundwater. The heterogeneous structure of the system is modeled based on available field information on the lithological data for both the vadose zone and aquifer. The approach includes a simulation assessment and linkages to site data, with an uncertainty analysis applied to evaluate the effects of source term uncertainty on contaminant mass flux to groundwater. An integrated assessment of alternative conceptual model elements was evaluated to identify how parameter uncertainty impacts both temporal and spatial uncertainties associated with vadose zone source terms. Modeling scenarios identify important characteristics of remediation target zones to provide context for how surface barriers, in situ remedies, and water-table treatment zones can be designed to account for source dynamics. Ramifications for remediation and monitoring are discussed within the context of the source term uncertainty. The described approach facilitates systematically addressing alternative conceptual model questions in relation to remediation and monitoring and supports the remedial investigation/ feasibility study process and the remediation strategy development for the Hanford Central Plateau. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Application of NEAMS Multiphysics Framework for Species Tracking in Molten Salt Reactors

This report from Idaho National Laboratory (INL) summarizes the key modeling and simulation activities conducted under the Department of Energy (DOE) Molten Salt Reactor (MSR) Campaign during the Fiscal Year 2023 (FY23). The focus of the work was to leverage state-of-the-art modeling capabilities from the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) codes to enable novel multiphysics and multiscale modeling and simulation of MSRs. Through collaboration with NEAMS code developers, advanced multiphysics analysis capabilities for MSR systems were demonstrated by coupling depletion, thermal-hydraulics, and thermochemistry into an innovative framework for chemical species transport in MSRs. As a result, the framework can track nuclides throughout their lifetimes in the core, from production (depletion) to advection throughout the salt volume (thermal-hydraulics) and off-gassing or precipitation outside of the salt (thermochemistry). This work supports the near-term deployment of MSRs by integrating the synergistic efforts between the DOE’s MSR Campaign and NEAMS program. The resulting framework will help better connect system design modelers with experimentalists to better understand and predict complex physical behaviors in MSRs. Researchers and MSR developers alike can now leverage these new modeling and simulation capabilities to perform novel analyses with applications including: • MSR dynamics during normal operational transients and accident scenarios • Off-gas system design and performance for fuel cycle and depletion analysis • Corrosion and active chemistry control for reactor component health and lifetime determination • Source term, decay heat and activity determination in accident scenarios • Special nuclear material accountancy and chemical forensic analysis for safeguards • Digital twin development of experiments and experimental reactor demonstrations • Measurement requirements for instrumentation and control design • Uncertainty and sensitivity analysis of missing data to inform future experimental data collection.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of an Integrated Mechanistic Source Term Assessment Capability for Lead- and Sodium-Cooled Fast Reactors

The scope of this project entails development of mechanistic source term assessment capabilities to inform and guide plant design activities and to support license applications. The main objective of this project is to couple NL’s SAS4A safety analysis code with the FAI’s FATE facility modeling code for mechanistic source term assessments in liquid-metal-cooled fast reactors. The end product is a coupled SAS4A-FATE code system for integrated mechanistic source term assessments and Level-2 PRA as the precursor for off-site dispersion analyses (Level-3 PRA). The SAS4A code is used to model system transients with fuel failures and its results are linked to the FATE code to predict radionuclide transport through the reactor vessel cover gas and containment system. The integrated code package offers a state-of-the-art radionuclide tracking capability for a spectrum of accident scenarios consistent with the plant dynamic response including the reactivity feedback to support Probabilistic Risk Assessments (PRA).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗