Search NASA⌕ Search

SEARCH · Search NASA

Results for “Statistical techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Propagation directions of hydromagnetic waves in interplanetary space - Pioneer 10 and 11

The real and imaginary parts of spectral matrices of magnetic field fluctuations near 4 and 5 AU are used separately to generate estimates of hydromagnetic wave normal directions over the frequency range 0.00001 to 0.01 Hz in the spacecraft frame. Both procedures suggest the predominance of the Alfven mode over the fast and slow MHD modes among transverse magnetic field perturbations. Both procedures also show that the Alfven mode is more common among transverse perturbations at 4 AU than at 5 AU. Statistical techniques are for estimating uncertainties in computed wave normal directions and it is concluded that the real parts of the spectral matrices are more useful than the imaginary parts in specifying wave normals at times of magnetic quiet in the solar wind near 4 and 5 AU.

Parker, G. D.↗

Very short range forecasts of visibility and ceiling

The development of methods for the short range forecasting of visibility and ceiling conditions is discussed. Short range forecasts of one hour or less (5 or 30 minutes), immediately after a series of local observations can be expected to be more accurate and reliable than any forecast of more than one hour. These forecasts can be accomplished by the operational implementation of fully automated aviation observation systems and the utilization of statistical techniques such as the Generalized Equivalent Markov model.

Hilsenrod, A.↗

A computer analysis of ERTS data of the Lake Gregory area of South Australia with particular emphasis on its role in terrain classification for engineering

A digital computer and multivariate statistical techniques were used to analyze 4-band multispectral data. A representation of the original data for each of the four bands allows a certain degree of terrain interpretation; however, variations in appearance of sites within and between bands, without additional criteria for deciding which representation should be preferred, create difficulties for classification. Investigation of the video data groups produced by principal components analysis and cluster analysis techniques shows that effective correlations with classifications of terrain produced by conventional methods could be carried out. The analyses also highlighted underlying relationships between the various elements. The approach used allows large areas (185 cm by 185 cm) to be classified into fundamental units within a matter of hours and can be applied to those parts of the Earth where facilities for conventional studies are poor or lacking.

Lodwick, G. D.↗

Oregon trails revisted

Oregon State University's Environmental Remote Sensing Applications Laboratory (ERSAL) has six full-time researchers with expertise in a variety of biological, Earth, atmospheric and computer sciences as well as image interpretation and statistical techniques. The primary emphasis of the ERSAL research and demonstration program is the development and application of remote sensing technology in operational resource management programs. LANDSAT multi-spectral, multi-date digital data and imagery are utilized in concert with high altitude NASA-acquired photography, low altitude ERSAL-acquired photography, and field observations and data to provide customized, inexpensive and useful final products. Synopses are given of 9 applications projects conducted in Oregon.

Lewis, A. J.↗

Dynamic mechanical characterization of cure of a polyimide-graphite fiber composite (PMR 15/Celion 6000)

Dynamic mechanical studies of thermosetting PMR 15 polyimide/Celion 6000 composites were used to characterize cure behavior. Variation in composite shear modulus with cure time for laminates partially cured under 3.45 MPa pressure was compared with that of laminates fully cured under pressure to select a partially cured system whose behavior corresponded with that of the pressure-cured composites. An empirical kinetic model was developed that relates relative composite shear moduli to cure time and temperature. This model, coupled with standard statistical techniques, was used in the determination of an overall activation energy, E = 145 kj/mole (35 kcal/mole) and order of reaction, n, for the cure reaction(s). The empirical relationship defining dynamic modulus as a function of time and temperature remained linear well into the glassy region. Changes in dynamic glass-transition temperature and in the breadth of the transition peaks with cure time are discussed. Shear modulus and damping were found to be more sensitive measures of relative extent of cure than Fourier transform infrared spectroscopy.

Hurwitz, F. I.↗

Lagrangian least-squares prediction of solar flux (F-bar 10.7)

The result of a study on the application of an improved statistical prediction method for estimating the intermediate-term (months) and long-term (years) behavior of solar flux is discussed. The study indicates that better predictions, in a chi square sense, are possible by selecting sets of the solar flux data such that each set (cycle) starts and ends at the maxima (or minima) for the data base and initialization point of the procedure. Then one applies a Lagrangian least-squares statistical technique. Evidence is also presented to support the existence of an aperiodic variation in the periods as well as the amplitudes.

Holland, R. L.↗

Processes and subdivisions in diogenites, a multivariate statistical analysis

Multivariate statistical techniques used on diogenite orthopyroxene analyses show the relationships that occur within diogenites and the two orthopyroxenite components (class I and II) in the polymict diogenite Garland. Cluster analysis shows that only Peckelsheim is similar to Garland class I (Fe-rich) and the other diogenites resemble Garland class II. The unique diogenite Y 75032 may be related to type I by fractionation. Factor analysis confirms the subdivision and shows that Fe does not correlate with the weakly incompatible elements across the entire pyroxene composition range, indicating that igneous fractionation is not the process controlling total diogenite composition variation. The occurrence of two groups of diogenites is interpreted as the result of sampling or mixing of two main sequences of orthopyroxene cumulates with slightly different compositions.

Harriott, T. A.↗

Detection of binaries with projected separations as large as 0.1 parsec

Repeated, accurate radial velocity measurements have been made of the 19 candidate wide binary stellar pairs of Bahcall and Soneira. There are 16 unambiguous cases of which six pairs are physical binaries. Projected separations of the binaries are estimated using the observed angular separations and well-determined spectroscopic parallaxes. The projected separations vary from about 0.002 pc to 0.08 pc. This validation of the statistical techniques used in identifying the candidate wide binaries opens up the possibility of large-scale systematic studies of the characteristics of wide binaries.

Latham, D. W.↗

Establishing homologies in protein sequences

Computer-based statistical techniques used to determine homologies between proteins occurring in different species are reviewed. The technique is based on comparison of two protein sequences, either by relating all segments of a given length in one sequence to all segments of the second or by finding the best alignment of the two sequences. Approaches discussed include selection using printed tabulations, identification of very similar sequences, and computer searches of a database. The use of the SEARCH, RELATE, and ALIGN programs (Dayhoff, 1979) is explained; sample data are presented in graphs, diagrams, and tables and the construction of scoring matrices is considered.

Dayhoff, M. O.↗

On the stellar rotation-activity connection

The relationship between rotation rates and surface activity in late-type dwarf stars is explored in a survey of recent theoretical and observational studies. Current theoretical models of stellar-magnetic-field production and coronal activity are examined, including linear kinematic dynamo theory, nonlinear dynamos using approximations, and full numerical simulations of the MHD equations; and some typical results are presented graphically. The limitations of the modeling procedures and the constraints imposed by the physics are indicated. The statistical techniques used in establishing correlations between various observational parameters are analyzed critically, and the methods developed for quasar luminosity functions by Avni et al. (1980) are used to evaluate the effects of upper detection bounds, incomplete samples, and missing data for the case of rotation and X-ray flux data.

Rosner, R.↗

Statistical tests of additional plate boundaries from plate motion inversions

The application of the F-ratio test, a standard statistical technique, to the results of relative plate motion inversions has been investigated. The method tests whether the improvement in fit of the model to the data resulting from the addition of another plate to the model is greater than that expected purely by chance. This approach appears to be useful in determining whether additional plate boundaries are justified. Previous results have been confirmed favoring separate North American and South American plates with a boundary located beween 30 N and the equator. Using Chase's global relative motion data, it is shown that in addition to separate West African and Somalian plates, separate West Indian and Australian plates, with a best-fitting boundary between 70 E and 90 E, can be resolved. These results are generally consistent with the observation that the Indian plate's internal deformation extends somewhat westward of the Ninetyeast Ridge. The relative motion pole is similar to Minster and Jordan's and predicts the NW-SE compression observed in earthquake mechanisms near the Ninetyeast Ridge.

Stein, S.↗

Statistical methods for efficient design of community surveys of response to noise: Random coefficients regression models

Research studies of residents' responses to noise consist of interviews with samples of individuals who are drawn from a number of different compact study areas. The statistical techniques developed provide a basis for those sample design decisions. These techniques are suitable for a wide range of sample survey applications. A sample may consist of a random sample of residents selected from a sample of compact study areas, or in a more complex design, of a sample of residents selected from a sample of larger areas (e.g., cities). The techniques may be applied to estimates of the effects on annoyance of noise level, numbers of noise events, the time-of-day of the events, ambient noise levels, or other factors. Methods are provided for determining, in advance, how accurately these effects can be estimated for different sample sizes and study designs. Using a simple cost function, they also provide for optimum allocation of the sample across the stages of the design for estimating these effects. These techniques are developed via a regression model in which the regression coefficients are assumed to be random, with components of variance associated with the various stages of a multi-stage sample design.

Tomberlin, T. J.↗

Determination of monthly mean humidity in the atmospheric surface layer over oceans from satellite data

A simple statistical technique is described to determine monthly mean marine surface-layer humidity, which is essential in the specification of surface latent heat flux, from total water vapor in the atmospheric column measured by space-borne sensors. Good correlation between the two quantities was found in examining the humidity soundings from radiosonde reports of mid-ocean island stations and weather ships. The relation agrees with that obtained from satellite (Seasat) data and ship reports averaged over 2 deg areas and a 92-day period in the North Atlantic and in the tropical Pacific. The results demonstrate that, by using a local regression in the tropical Pacific, total water vapor can be used to determine monthly mean surface layer humidity to an accuracy of 0.4 g/kg. With a global regression, determination to an accuracy of 0.8 g/kg is possible. These accuracies correspond to approximately 10 to 20 W/sq m in the determination of latent heat flux with the bulk parameterization method, provided that other required parameters are known.

Liu, W. T.↗

Understanding climate: A strategy for climate modeling and predictability research, 1985-1995

The emphasis of the NASA strategy for climate modeling and predictability research is on the utilization of space technology to understand the processes which control the Earth's climate system and it's sensitivity to natural and man-induced changes and to assess the possibilities for climate prediction on time scales of from about two weeks to several decades. Because the climate is a complex multi-phenomena system, which interacts on a wide range of space and time scales, the diversity of scientific problems addressed requires a hierarchy of models along with the application of modern empirical and statistical techniques which exploit the extensive current and potential future global data sets afforded by space observations. Observing system simulation experiments, exploiting these models and data, will also provide the foundation for the future climate space observing system, e.g., Earth observing system (EOS), 1985; Tropical Rainfall Measuring Mission (TRMM) North, et al. NASA, 1984.

Thiele, O.↗

Distinguishing among tallgrass prairie cover types from measurements of multispectral reflectance

The heterogeneity in surface cover caused by management practices or natural events complicates monitoring the conditions of grasslands and assessing their productivity by remote sensing techniques. Statistical procedures were sought that would allow different grassland surface cover types (bare soil, senescent vegetation, and green vegetation) to be distinguished by using measurements of grassland multispectral reflectance. Two procedures, discriminant analysis and canonical discriminant analysis, were found suitable for achieving this objective. Linear classification functions and canonical variables were derived, which distinguish between the three cover types. A comparison between two sensor systems, a Barnes multiband radiometer and an Exotech radiometer that simulates the Landsat thematic mapper (TM) and multispectral scanner (MSS) bands, respectively, showed that the separability among the three cover types was substantially improved by the additional and improved spectral features of the Barnes radiometer.

Asrar, G.↗

Intelligent guidance and control for wind shear encounter

The principal objective is to develop methods for assessing the likelihood of wind shear encounter, for deciding what flight path to pursue, and for using the aircraft's full potential for combating wind shear. This study requires the definition of both deterministic and statistical techniques for fusing internal and external information, for making go/no-go decisions, and for generating commands to the aircraft's cockpit displays and autopilot for both manually controlled and automatic flight. The program has begun with the development of a real-time expert system for pilot aiding that is based on the results of the FAA Windshear Training Aids Program. A two-volume manual that presents an overview, pilot guide, training program, and substantiating data provides guidelines for this initial development. The Expert System to Avoid Wind Shear (ESAWS) currently contains over 140 rules and is coded in the LISP programming language for implementation on a Symbolics 3670 LISP machine.

Stengel, Robert F.↗

An expert system for reliability modeling

A method is presented for computing the probability of failure of a unit during the next usage or mission based on sound statistical techniques. With the use of logit regression embedded in Lotus 1-2-3 macros, this package computes the probability of unit failure based upon a historical data base. Using this computed probability of failure, the package then makes a replacement recommendation based upon the experts acceptable risk parameters.

Goss, Ernst↗

The microwave spectrum of asteroid Ceres

This paper presents new measurements of the microwave flux of Ceres obtained at wavelengths between 3.3 mm and 20 cm using the 12 m Kitt Peak antenna and the Very Large Array. These new measurements are combined with previous measurements to confirm a substantial decrease in flux density at centimeter wavelengths compared to millimeter wavelength. Using a statistical technique adapted from terrestrial microwave remote sensing, this spectrum has been compared with that of various candidate materials and models for the subsurface structure of Ceres. It is concluded that Ceres is largely covered with a 3-cm-thick layer whose dielectric properties resemble dry terrestrial clay. This layer may have formed by micrometeorite impact on hydrothermally altered basic or ultrabasic rock or on carbonaceous chondrite material.

Webster, W. J., Jr.↗