Attitude Control and Structural Response Interaction
Interaction between structural or elastic response of spacecraft and attitude control system dynamics
Abel, J.↗
SEARCH · Search NASA
Results for “Structure Interactions”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Overview of large space systems/propulsion interactions
Large space structure characteristics, antenna controller design, the attitude control system, mission grouping, propulsion system/large space structure interactions, structural mass impact for start transient effects, box truss multiple thrust point effects, and large space structure/propulsion issues are illustrated.
Carlisle, R. F.↗
Structural Dynamics and Control Interaction of Flexible Structures
A workshop on structural dynamics and control interaction of flexible structures was held to promote technical exchange between the structural dynamics and control disciplines, foster joint technology, and provide a forum for discussing and focusing critical issues in the separate and combined areas. Issues and areas of emphasis were identified in structure-control interaction for the next generation of flexible systems.
Ryan, Robert S.↗
Structural control interaction
The basic guidance and control concepts that lead to structural control interaction and structural dynamic loads are identified. Space vehicle ascent flight load sources and the load relieving mechanism are discussed, along with the the characteristics and special problems of both present and future space vehicles including launch vehicles, orbiting vehicles, and the Space Shuttle flyback vehicle. The special dynamics and control analyses and test problems apparent at this time are summarized.
Ryan, R. S.↗
The Shock and Vibration Bulletin. Part 3: Structure Medium Interaction, Case Studies in Dynamics
Structure and medium interactions topics are addressed. Topics include: a failure analysis of underground concrete structures subjected to blast loadings, an optimization design procedure for concrete slabs, and a discussion of the transient response of a cylindrical shell submerged in a fluid. Case studies in dynamics are presented which include an examination of a shock isolation platform for a seasparrow launcher, a discussion of hydrofoil fatigue load environments, and an investigation of the dynamic characteristics of turbine generators and low tuned foundations.
Director of Defense Research and Engineering↗
Structures: Propulsion interactions and requirements
The dynamics of the interaction of space structures and their propellant systems are outlined. Optimization for a platform type of space structure is discussed. Static and transient loads, propellant accelerations, tolerances, attitude control, and distributed thrust are considered.
Pengelley, C. D.↗
Controls-structures-electromagnetics interaction program
A technology development program is described involving Controls Structures Electromagnetics Interaction (CSEI) for large space structures. The CSEI program was developed as part of the continuing effort following the successful kinematic deployment and RF tests of the 15 meter Hoop/Column antenna. One lesson learned was the importance of making reflector surface adjustment after fabrication and deployment. Given are program objectives, ground based test configuration, Intelsat adaptive feed, reflector shape prediction model, control experiment concepts, master schedule, and Control Of Flexible Structures-II (COFS-II) baseline configuration.
Grantham, William L.↗
Analysis of random structure-acoustic interaction problems using coupled boundary element and finite element methods
A coupled boundary element (BEM)-finite element (FEM) approach is presented to accurately model structure-acoustic interaction systems. The boundary element method is first applied to interior, two and three-dimensional acoustic domains with complex geometry configurations. Boundary element results are very accurate when compared with limited exact solutions. Structure-interaction problems are then analyzed with the coupled FEM-BEM method, where the finite element method models the structure and the boundary element method models the interior acoustic domain. The coupled analysis is compared with exact and experimental results for a simplistic model. Composite panels are analyzed and compared with isotropic results. The coupled method is then extended for random excitation. Random excitation results are compared with uncoupled results for isotropic and composite panels.
Mei, Chuh↗
Interaction of structure and liquid in the sound suppressor system
Interaction of structure and liquid of the Saturn V sound suppressor system
SATURN V LAUNCH VEHICLE↗
Modeling, Analysis, and Optimization Issues for Large Space Structures
Topics concerning the modeling, analysis, and optimization of large space structures are discussed including structure-control interaction, structural and structural dynamics modeling, thermal analysis, testing, and design.
Pinson, L. D.↗
Control System Modeling for the Thirty Meter Telescope Primary Mirror
The Thirty Meter Telescope primary mirror is composed of 492 segments that are controlled to high precision in the presence of wind and vibration disturbances, despite the interaction with structural dynamics. The higher bandwidth and larger number of segments compared with the Keck telescopes requires greater attention to modeling to ensure success. We focus here on the development and validation of a suite of quasi-static and dynamic modeling tools required to support the design process, including robustness verification, performance estimation, and requirements flowdown. Models are used to predict the dynamic response due to wind and vibration disturbances, estimate achievable bandwidth in the presence of control-structure-interaction (CSI) and uncertainty in the interaction matrix, and simulate and analyze control algorithms and strategies, e.g. for control of focus-mode, and sensor calibration. Representative results illustrate TMT performance scaling with parameters, but the emphasis is on the modeling framework itself.
uncetainty↗
On the nature of the interaction between structures and proof-mass actuators
This paper presents an analysis of the interaction between a structure, an actuator used to control the vibration of the structure, and the control law to be implemented by the actuator. The control hardware used is a proof-mass actuator with experimentally verified dynamics capable of being used in a space structure configuration. A local rate-feedback control law is used. The control of two different structures is presented. The first structure is a cantilevered beam constructed of a quasi-isotropic composite material that is controlled by a single actuator forming the experimental component of the investigation. The second structure is a finite-element model of a truss system controlled by a single actuator. Models of both structures predict the presence of potential instabilities in system performance if proper consideration is not given to interactions between the control law, the structure, and the actuator.
Zimmerman, David C.↗
An information driven strategy to support multidisciplinary design
The design of complex engineering systems such as aircraft, automobiles, and computers is primarily a cooperative multidisciplinary design process involving interactions between several design agents. The common thread underlying this multidisciplinary design activity is the information exchange between the various groups and disciplines. The integrating component in such environments is the common data and the dependencies that exist between such data. This may be contrasted to classical multidisciplinary analyses problems where there is coupling between distinct design parameters. For example, they may be expressed as mathematically coupled relationships between aerodynamic and structural interactions in aircraft structures, between thermal and structural interactions in nuclear plants, and between control considerations and structural interactions in flexible robots. These relationships provide analytical based frameworks leading to optimization problem formulations. However, in multidisciplinary design problems, information based interactions become more critical. Many times, the relationships between different design parameters are not amenable to analytical characterization. Under such circumstances, information based interactions will provide the best integration paradigm, i.e., there is a need to model the data entities and their dependencies between design parameters originating from different design agents. The modeling of such data interactions and dependencies forms the basis for integrating the various design agents.
Rangan, Ravi M.↗
Dynamic interaction between structure and liquid propellants in a space shuttle vehicle model, part 1 Final report
Dynamic interaction between structure and liquid propellants in space shuttle vehicle models
Francis, P. H.↗
Study of structure defect interactions in aluminum by the acoustic method
Using echo pulse and resonance rod methods, internal friction in pure aluminum was studied as a function of frequency, hardening temperature, time (internal friction relaxation) and impurity content. These studies led to the conclusion that internal friction in these materials depends strongly on dislocation structure and on elastic interactions between structure defects. It was found experimentally that internal friction relaxation depends on the cooling rate and on the impurity content. Some parameters of the dislocation structure and of the diffusion process were determined. It is shown that the dislocated dependence of internal friction can be used as a method of nondestructive testing of the impurity content of high-purity materials.
Nicolaescu, I. I.↗
On Orbit Flight Testing of the Roll-Out Solar Array
The Roll-Out Solar Array (ROSA) is an innovative, lightweight solar array with a flexible substrate that makes use of the stored strain energy in its composite structural members to provide deployment without the use of motors while still packaging efficiently. The ROSA flight experiment was launched to the International Space Station (ISS)on June 3rd, 2017 as a part of the eleventh SpaceX commercial resupply mission. After two weeks of storage, ROSA was extracted from the Dragon spacecraft, deployed, and put through a week of tests to verify its structural characteristics as well as the performance of photovoltaics. The structural dynamics experiments included active excitation of out-of-plane bending modes, and a study of the thermal-structural interaction of the structure during day-night transitions. Data was gathered from a small number of accelerometers located at key points on the solar array and from cameras observing numerous photogrammetry targets spread out over the structure and the photovoltaic blanket. The goal in this effort was to better understand the performance of ROSA and to improve modeling efforts for future designs of similar solar arrays. Of particular interest are the first few system modes and mode shapes of the array, the amount of structural damping present, and degree of structural-thermal interaction seen during eclipse exit.
ROSA↗
Workshop on Structural Dynamics and Control Interaction of Flexible Structures
The Hubble Space Telescope features the most exacting line of sight jitter requirement thus far imposed on a spacecraft pointing system. Consideration of the fine pointing requirements prompted an attempt to isolate the telescope from the low level vibration disturbances generated by the attitude control system reaction wheels. The primary goal was to provide isolation from axial component of wheel disturbance without compromising the control system bandwidth. A passive isolation system employing metal springs in parallel with viscous fluid dampers was designed, fabricated, and space qualified. Stiffness and damping characteristics are deterministic, controlled independently, and were demonstrated to remain constant over at least five orders of input disturbance magnitude. The damping remained purely viscous even at the data collection threshold of .16 x .000001 in input displacement, a level much lower than the anticipated Hubble Space Telescope disturbance amplitude. Vibration attenuation goals were obtained and ground test of the vehicle has demonstrated the isolators are transparent to the attitude control system.
Davis, L. P.↗
Structural Dynamics and Control Interaction of Flexible Structures
A Workshop was held to promote technical exchange between the structural dynamic and control disciplines, foster joint technology, and provide a forum for discussing and focusing critical issues in the separate and combined areas. The workshop was closed by a panel meeting. Panel members' viewpoints and their responses to questions are included.
Ryan, Robert S.↗