SEARCH · Search NASA
Results for “Superstructures”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Hierarchical Nanoporous Diamondoid Superstructure
Not Available
Phase equilibria in systems Ce-M-Sb (M=Si, Ge, Sn) and superstructure Ce{sub 12}Ge{sub 9-x}Sb{sub 23+x} (x=3.8+-0.1)
Phase relations in the ternary systems Ce-M-Sb (M=Si, Ge, Sn) in composition regions CeSb{sub 2}-Sb-M were studied by optical and electron microscopy, X-ray diffraction, and electron probe microanalysis on arc-melted alloys and specimens annealed in the temperature region from 850 to 200 deg. C. The results, in combination with an assessment of all literature data available, were used to construct solidus surfaces and a series of isothermal sections. No ternary compounds were found to form in the Ce-Si-Sb system whilst Ce{sub 12}Ge{sub 9-x}Sb{sub 23+x} (3.3<x<4.2) and CeSn{sub x}Sb{sub 2} (0.1<x<0.8) participate in phase equilibria in the composition region investigated. Crystallographic parameters for the ternary compound Ce{sub 12}Ge{sub 9-x}Sb{sub 23+x} (x=3.8+-0.1) were determined from X-ray single crystal and powder diffraction. For the binary system Ge-Sb a eutectic was defined Lreversible(Ge)+(Sb) at 591.6 deg. C and 22.5 at%. Ge EPMA revealed a maximal solubility of 6.3 at% Ge in (Sb) at the eutectic temperature. - Graphical abstract: Phase relations in the ternary systems Ce-M-Sb (M=Si, Ge, Sn) in composition regions CeSb{sub 2}-Sb-M have been studied by optical and electron microscopy, XRD and EPMA on as cast alloys and specimens annealed in the temperature region 200-850 deg. C.
Superstructure-based optimization of membrane network systems for multicomponent liquid mixture separation
Not Available
Flotation recovery–by–size comparison of pyrrhotite superstructures with and without depressants
Not Available
Biomimetic Extracellular Scaffolds by Microfluidic Superstructuring of Nanofibers
Not provided.
Crystallization-Induced Flower-like Superstructures via Peptoid Helix Assembly
Not provided.
Photocatalytically Active Superstructures of Quantum Dots and Iron Porphyrins for Reduction of CO 2 to CO in Water
In this paper, we describe the use of electrostatic assemblies of negatively charged colloidal CuInS 2 /ZnS quantum dot (QD) sensitizers and positively charged, trimethylamino-functionalized iron tetraphenylporphyrin catalysts (FeTMA) to photoreduce CO 2 to CO in water upon illumination with 450 nm light. This system achieves a turnover number (TON) of CO (per FeTMA) of 450 after 30 h of illumination, with a selectivity of 99%. Its sensitization efficiency (TON per Joule of photons absorbed) is a factor of 11 larger than the previous record for photosensitization of an iron porphyrin catalyst for this reaction, held by a system in which both QDs and metal porphyrin were uncharged. Steady-state and time-resolved optical spectroscopy provides evidence for electrostatic assembly of QDs and FeTMA. Control of the size of the assemblies with addition of a screening counterion, K + , and a correlation between their measured size and their catalytic activity, indicates that the enhancement in performance of this system over the analogous uncharged system is due to the proximity of the FeTMA catalyst to multiple light-absorbing QDs and the selective formation of QD–FeTMA contacts (rather than QD–QD or FeTMA–FeTMA contacts). Finally, this system therefore shows the ability to funnel photoinduced electrons to a reaction center, which is crucial for carrying out reactions that require multistep redox processes under low photon flux, and thus is an important advance in developing artificial photocatalytic systems that function in natural light.
Intralayer Cation Ordering in a Brownmillerite Superstructure: Synthesis, Crystal, and Magnetic Structures of Ca2FeCoO5
The synthesis, crystal, and magnetic structures and the bulk magnetic properties of Ca2FeCoO5, a brownmillerite type oxide, are presented. The crystal structure, solved and refined from single crystal X-ray and powder neutron diffraction data, is described in Pbcm with cell parameters, a = 5.3652(3) , b = 11.0995(5) , c = 14.7982(7) . Thus, one axis, b in this setting, is doubled in comparison with the standard brownmillerite structure description giving rise to two sets of octahedral and tetrahedral sites. Aided by the strong scattering contrast between Fe and Co for neutrons, a nearly perfect intralayer cation site ordering, not observed for any brownmillerite before, is detected in the tetrahedral layers. There is a lesser degree of cation site ordering in the octahedral sites. Overall, the Fe/Co site ordering is of the NaCl type both within and between the tetrahedral and octahedral layers. There are also both intra- and interlayer ordering of tetrahedral chain orientations. The left- and right-handed orientations alternate within each tetrahedral layer as well as between the closest tetrahedral layers. The occurrence of the rare Pbcm space group in Ca2FeCoO5 is not consistent with a recently proposed structure-field map for brownmillerite oxides. The magnetic structure is G-type antiferromagnetic, with preferred orientation of magnetic moments parallel to the longest axis between 3.8 K to 100 K which switches to the shortest axis between 225 K and 550 K. The neutron diffraction data indicate different site specific ordering temperatures at about 450(5) K and 555(5) K. The refined ordered moments at 3.8 K are somewhat smaller than expected for Fe3+ and Co3+(high spin) but are similar to those found in Sr2FeCoO5. There is evidence for spin canting from isothermal magnetization data that shows well pronounced hystereses and remnant magnetizations at 5 K and 200 K.
Indium flux-growth of Eu{sub 2}AuGe{sub 3} : a new germanide with an AlB{sub 2} superstructure.
The germanide Eu{sub 2}AuGe{sub 3} was obtained as large single crystals in high yield from a reaction of the elements in liquid indium. At room temperature Eu{sub 2}AuGe{sub 3} crystallizes with the Ca{sub 2}AgSi{sub 3} type, space group Fmmm, an ordered variant of the AlB{sub 2} type: a = 857.7(4), b = 1485.5(10), c = 900.2(4) pm. The gold and germanium atoms build up slightly distorted graphite-like layers which consist of Ge{sub 6} and Au{sub 2}Ge{sub 4} hexagons, leading to two different hexagonal-prismatic coordination environments for the europium atoms. Magnetic susceptibility data showed Curie?Weiss law behavior above 50 K and antiferromagnetic ordering at 11 K. The experimentally measured magnetic moment indicates divalent europium. The compound exhibits a distinct magnetic anisotropy based on single crystal measurements and at 5 K it shows a metamagnetic transition at 10 kOe. Electrical conductivity measurements show metallic behavior. The structural transition at 130 K observed in the single crystal data was very well supported by the conductivity measurements. {sup 151}Eu Moessbauer spectroscopic data show an isomer shift of ?11.24 mm/s at 77 K, supporting the divalent character of europium. In the magnetically ordered regime one observes superposition of two signals with hyperfine fields of 26.0 (89%) and 3.5 (11%) T, respectively, indicating differently ordered domains.
Superstructure-based optimal synthesis of pressure swing adsorption cycles for precombustion CO2 capture
The grand challenge facing the power and energy industries is the development of efficient, environmentally friendly, and affordable technologies for next-generation energy systems. To provide solutions for energy and the environment, the U.S. Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) and its research partners in industry and academia are relying increasingly on the use of sophisticated computer-aided process design and optimization tools. In this paper, we describe recent progress toward developing an Advanced Process Engineering Co-Simulator (APECS) for the high-fidelity design, analysis, and optimization of energy plants. The APECS software system combines steady-state process simulation with multiphysics-based equipment simulations, such as those based on computational fluid dynamics (CFD). These co-simulation capabilities enable design engineers to optimize overall process performance with respect to complex thermal and fluid flow phenomena arising in key plant equipment items, such as combustors, gasifiers, turbines, and carbon capture devices. In this paper we review several applications of the APECS co-simulation technology to advanced energy systems, including coal-fired energy plants with carbon capture. This paper also discusses ongoing co-simulation R&D activities and challenges in areas such as CFD-based reduced-order modeling, knowledge management, advanced analysis and optimization, and virtual plant co-simulation. Continued progress in co-simulation technology – through improved integration, solution, and deployment – will have profound positive impacts on the design and optimization of high-efficiency, near-zero emission fossil energy systems. Published by Elsevier Ltd.
Randomly Layered Superstructure of In 2 O 3 Truncated Nano-Octahedra and Its High-Pressure Behavior
This study outlines the synthesis and characterization of a unique superlattice composed of vertex-truncated indium oxide (In 2 O 3 ) nano-octahedra, along with an exploration of its response to high-pressure conditions. Here, using a bright-field transmission electron microscope (BF-TEM), we determined an average circumradius of 15.2 nm for these octahedral building blocks. The resilience and response of the superlattice to pressure variations, peaking at 18.01 GPa, were examined by employing synchrotron-based Wide-Angle X-ray Scattering (WAXS) and Small-Angle X-ray Scattering (SAXS) techniques. The WAXS data revealed no phase transitions, reinforcing the stability of the 2D superlattice comprised of random layers in alignment with a 2D p31m symmetry. Notably, the SAXS data unveiled a pressure-induced, irreversible octahedron translation and ligand interaction occurring within the random layer. Through our examination of these pressure-sensitive behaviors, we identified a distinctive translation model inherent to octahedra and observed modulation in the superlattice cell parameter induced by pressure. This research signifies a noteworthy progression in deciphering the intricate behaviors of 2D superlattices under high-pressure conditions.