Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface process complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Relaxation behavior in low-frequency complex conductivity of sands caused by bacterial growth and biofilm formation by Shewanella oneidensis under a high-salinity condition

Complex electrical conductivity is increasingly used to monitor subsurface processes associated with microbial activities because microbial cells mostly have surface charges and thus electrical double layers. Although highly saline environments are frequently encountered in coastal and marine sediments, there are limited data available on the complex conductivity associated with microbial activities under a high-salinity condition. Therefore, we have developed the spectral responses of complex conductivity of sand associated with bacterial growth and biofilm formation under a highly saline condition of approximately 1% salinity and approximately 2 S/m pore water conductivity with an emphasis on relaxation behavior. A column test is performed, in which the model bacteria Shewanella oneidensis MR-1 are stimulated for cell growth and biofilm formation in a sand pack, whereas the complex conductivity is monitored from 0.01 Hz to 10 kHz. The test results indicate that the real conductivity increases in the early stage due to the microbial metabolites and the increased surface conduction with cell growth but soon begin to decrease because of the reduction of charge passages due to bioclogging. However, the imaginary conductivity significantly increases with time, and clear bell-shaped relaxation behaviors are observed with the peak frequency of 0.1–1 Hz, associated with the double-layer polarization of cells and electrically conductive pili and biofilms. The Cole-Cole relaxation model appears to capture such relaxation behaviors well, and the modeling results indicate gradual increases in normalized chargeability and decreases in relaxation time during bacterial growth and biofilm formation in the highly saline condition. Comparison with previous literature confirms that the high-salinity condition further increases the normalized chargeability, whereas it suppresses the phase shift and thus the imaginary conductivity. Our results suggest that the complex conductivity can effectively capture microbial biomass formation in sands under a highly saline condition.

58 GEOSCIENCES↗
DOE OSTI2025

Decoding Antenna Behavior in Metal—Organic Frameworks

Metal–organic frameworks (MOFs) define a solid-state platform for developing artificial photosystems. Efficient anisotropic exciton migrations in these frameworks entail “antenna behavior” that can power up the distal interior reaction centers (RC), driving charge separation between donor-acceptor pairs. Reminiscent of the natural light-harvesting complex, such processes can achieve high quantum yield by exploiting the vast interior surface of the porous crystallites. It is important to understand the optimum positioning of the RC site relative to the anisotropic exciton migration path within these frameworks. The efficiency of such antenna behavior is probed here through Stern–Volmer (SV) type analysis with a series of node-anchored redox quenchers, ferrocene-carboxylate, ferrocene acetate, and dinitrobenzoate. Decoding various intrinsic processes, this work constructs a revised SV formalism in solid assembly that hosts ultrafast anisotropic exciton migration to account for the intrinsic exciton hopping rate from the extrinsic electron transfer rate, and the dimension of effective quenching. In conclusion, this transformative understanding can be applied to other relevant solid-state assemblies.

Saha, Bapan [Southern Illinois University, Carbond↗
DOE OSTI2025

Patchy nanoparticles by atomic stencilling

Stencilling, in which patterns are created by painting over masks, has ubiquitous applications in art, architecture and manufacturing. Modern, top-down microfabrication methods have succeeded in reducing mask sizes to under 10 nm, enabling ever smaller microdevices as today’s fastest computer chips. Meanwhile, bottom-up masking using chemical bonds or physical interactions has remained largely unexplored, despite its advantages of low cost, solution-processability, scalability and high compatibility with complex, curved and three-dimensional (3D) surfaces. Here we report atomic stencilling to make patchy nanoparticles (NPs), using surface-adsorbed iodide submonolayers to create the mask and ligand-mediated grafted polymers onto unmasked regions as ‘paint’. We use this approach to synthesize more than 20 different types of NP coated with polymer patches in high yield. Polymer scaling theory and molecular dynamics (MD) simulation show that stencilling, along with the interplay of enthalpic and entropic effects of polymers, generates patchy particle morphologies not reported previously. These polymer-patched NPs self-assemble into extended crystals owing to highly uniform patches, including different non-closely packed superlattices. We propose that atomic stencilling opens new avenues in patterning NPs and other substrates at the nanometre length scale, leading to precise control of their chemistry, reactivity and interactions for a wide range of applications, such as targeted delivery, catalysis, microelectronics, integrated metamaterials and tissue engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct Observation of Photoexcited Charge Carrier Dynamics and Electrostatic Fields at Photocatalytic Semiconductor/liquid Interfaces

Photoelectrochemical conversion of solar energy to fuels at semiconductor-liquid interfaces involves a complex set of processes, which include band bending, built-in electric fields, surface recombination of photoexcited carriers, and ultimately charge transfer to the ions in solution, in which the electrostatic fields within the depletion region of the semiconductor plays an important role. There are loss mechanisms associated with each of these key components in the overall photoelectrochemical conversion efficiency. Direct probe of these elementary processes is key to the rational improvement of photoeletrochemical cells and electrodes. In this collaborative project, Tianquan Lian at Emory University, Steve Cronin at University of Southern California and their students and postdoctoral fellows carried out a series of studies that are aimed at direct observation of photoexcited charge carrier dynamics at photocatalytic semiconductor/liquid interfaces. The collaborative work led to the development of transient reflectance spectroscopy as a tool for in situ probing of carrier dynamics in planar photoelectrode/electrode interface; and the demonstration that this tool can be used to study oxide protected GaP to identify key efficiency limiting factors in these photoelectrodes. This work has led to the development a tool for in situ probing of carrier dynamics in planar photoelectrodes, which will facilitate the mechanistic study of photoelectrochemical cells. This work informs the development of better photoelectrode materials for solar water splitting and CO 2 reduction. This work has contributed to the training of three PhD students in the area of photoelectrochemistry, ultrafast spectroscopy and solar energy conversion

14 SOLAR ENERGY↗
DOE OSTI2023

Surface Complexation/Ion Exchange Hybrid Model for Radionuclide Sorption to Clay Minerals (M4SF-23LL010301062)

This progress report (Level 4 Milestone Number M4SF-23LL010301062) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Argillite International Collaborations Activity Number SF-23LL01030106. The activity is focused on our long-term commitment to engaging our partners in international nuclear waste repository research. The focus of this milestone is the establishment of international collaborations for surface complexation modeling and the associated impacts of unlocking larger, community-based datasets. More specifically, we are developing a database framework for Spent Fuel and Waste and Science Technology (SFWST) that is aligned with the Helmholtz Zentrum Dresden Rossendorf (HZDR) sorption database development group in support of the database needs of the SFWST program. In our FY22 effort, we described a detailed analysis of U(VI) sorption to quartz through both traditional surface complexation modeling and through a hybrid ML framework. In FY23, effort was placed on publication of these results and expansion of the LLNL surface complexation and ion exchange database (L-SCIE) in order to assess mineral-based radionuclide retardation under a wider variety of geochemical conditions (e.g., ionic strength, varying electrolyte compositions). Efforts were initiated to expand L-SCIE to include radionuclide surface complexation and ion exchange to clays that are relevant to subsurface geochemical processes occurring at nuclear waste repositories. In particular, a large source of sorption data for clays resides at the Paul Scherrer Institute (PSI) (work primarily by Bradbury and Baeyens) and we initiated discussions on how to retrieve those data and apply FAIR principles to those datasets. In addition to L-SCIE development, two hybrid models that incorporate AI/ML were investigated and compared to discern the most promising approaches for accurate and precise estimations of radionuclide retardation. Key considerations for future model development include (1) the ability to reduce computational burden on determining retardation coefficients for PA and (2) the ability to quantify and predict radionuclide-mineral partitioning at a more efficient, rapid pace due to automated workflows. Upon the careful consideration of the most effective modeling approaches, we are identifying ways to implement these approaches into PA. Ultimately, the data science-based workflows will provide a major incentive for other institutions to adopt a FAIR-formatted, interoperable database. LLNL will play a key role in disseminating sorption data and acting as good data stewards by updating the database in a consistent format and assessing the quality of the newly assimilated data in an organized fashion. To this end, all data and workflows are open access and made available on the LLNL Seaborg research website (https://seaborg.llnl.gov/resources/geochemical-databases-modeling-codes).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Dimensionality effects on multicomponent ionic transport and surface complexation in porous media

Coulombic interactions between charged species in pore water and at surface/solution interfaces are of pivotal importance for multicomponent reactive transport in porous media. In this study, we investigate the impact of domain dimensionality on electrostatically coupled dispersion and surface-solution reactions during transport of acidic plumes and major ions in porous media. Column and quasi two-dimensional flow-through experiments were performed, with identical silica porous media and under the same advection-dominated conditions. Equal mass fluxes of different electrolyte solutions (i.e., HCl - pH ~ 2.8, NaBr - 100 mM, HCl - pH ~ 2.8 plus NaBr - 100 mM) were continuously injected in the 1-D and 2-D experiments and breakthrough curves of pH and major ions were measured at the outlet of the domains. The presence of pronounced ionic strength gradients in the transverse direction in the 2-D setup caused distinct retardation and transport behaviors of protons and major ions which were not observed in the one-dimensional column experiments. Furthermore, in the cases of salt electrolytes injection, considerably enhanced release of H + (>61%) from the quartz surface was observed in the multidimensional system compared to the one-dimensional setup. Reactive transport modeling was performed to reproduce the experimental outcomes and to analyse the coupling between transport processes, based on the Nernst-Planck formulation of diffusive/dispersive fluxes and on surface complexation reactions at the solid-solution interface. Electrostatic interactions between Na + , B – , and H + , and deprotonation of the quartz surface upon the formation of sodium outer-sphere complexes, are the primary controllers of the spatial and temporal features displayed by the pH and major ions measurements. The reactive transport simulations allowed us to interpret the experimental observations, to visualize the distribution and spatio-temporal evolution of dissolved and solid species, to identify a spatially heterogeneous zonation of Coulombic interactions with distinct behavior at the fringe and core of the injected plumes in the multidimensional setup, and to quantify the different components of the Nerst-Planck fluxes of the charged solutes. This study demonstrates that the domain dimensionality directly affects electrostatic interactions between charged aqueous species in the pore water and surface complexation reactions at the solid-solution interface. The non-trivial effects of dimensionality on multicomponent ionic transport result in a significantly different behavior in 1-D and 2-D systems.

58 GEOSCIENCES↗
NASA NTRS1995

The VOrtex Ring Transit EXperiment (VORTEX) GAS project

Get Away Special (GAS) payload G-093, also called VORTEX (VOrtex Ring Transit EXperiment), is an investigation of the propagation of a vortex ring through a liquid-gas interface in microgravity. This process results in the formation of one or more liquid droplets similar to earth based liquid atomization systems. In the absence of gravity, surface tension effects dominate the drop formation process. The Shuttle's microgravity environment allows the study of the same fluid atomization processes as using a larger drop size than is possible on Earth. This enables detailed experimental studies of the complex flow processes encountered in liquid atomization systems. With VORTEX, deformations in both the vortex ring and the fluid surface will be measured closely for the first time in a parameters range that accurately resembles liquid atomization. The experimental apparatus will record images of the interactions for analysis after the payload has been returned to earth. The current design of the VORTEX payload consists of a fluid test cell with a vortex ring generator, digital imaging system, laser illumination system, computer based controller, batteries for payload power, and an array of housekeeping and payload monitoring sensors. It is a self-contained experiment and will be flown on board the Space Shuttle in a 5 cubic feet GAS canister. The VORTEX Project is entirely run by students at the University of Michigan but is overseen by a faculty advisor acting as the payload customer and the contact person with NASA. This paper summarizes both the technical and programmatic aspects of the VORTEX Project.

Bilen, Sven G.↗
DOE OSTI2024

Plasma Surface Interactions: Predicting the Performance and Impact of Dynamic PFC Surfaces

The objective of this project is to develop, and integrate, high-performance simulation tools capable of predicting plasma-facing component (PFC) operating lifetime and the impact of the evolving surface morphology of tungsten-based PFCs on plasma contamination, including the dynamic recycling of fuel species and tritium retention, in future magnetic fusion devices. Establishing a fundamental physical understanding and developing predictive capabilities of plasma-surface interactions (PSI) requires simultaneously addressing complex and diverse physics occurring over a wide range of length (Angstroms to meters) and time (femtoseconds to years) scales, as well as integrating extensive physical processes across the plasma–surface interface. This requires development of not only detailed physics models and computational strategies at each scale, but also algorithms and methods to couple them effectively in a way that can be robustly validated. Deploying these tools requires the continued development and coupling of leadership-scale computational codes to describe the boundary plasma and the evolving PFC surface, as well as a host of simulations that bridge disparate scales to address complex physical and computational issues at the plasma–surface interface in multi-component materials systems for magnetic fusion energy development beyond ITER.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Use of beam deflection to control an electron beam wire deposition process

A method for controlling an electron beam process wherein a wire is melted and deposited on a substrate as a molten pool comprises generating the electron beam with a complex raster pattern, and directing the beam onto an outer surface of the wire to thereby control a location of the wire with respect to the molten pool. Directing the beam selectively heats the outer surface of the wire and maintains the position of the wire with respect to the molten pool. An apparatus for controlling an electron beam process includes a beam gun adapted for generating the electron beam, and a controller adapted for providing the electron beam with a complex raster pattern and for directing the electron beam onto an outer surface of the wire to control a location of the wire with respect to the molten pool.

Taminger, Karen M.↗
DOE OSTI2024

The Electron Spectro-Microscopy (ESM) Beamline at NSLS-II

Photoelectron spectroscopy is a primary tool for the study of the electronic structure of materials and the chemical composition of surfaces. High-resolution angle-resolved photoemission spectroscopy (ARPES) has the unique ability to map the energy bands in momentum space. Furthermore, going beyond the single particle picture, the self-energy corrections caused by correlations in solids can be extracted from the analysis of the emission line shape. The current level of refinement, in terms of energy and angular resolution (ΔE < 1 meV, Δθ < 0.1°), makes the technique sensitive to the lowest energy excitations and the dynamics of electrons, which in turn virtually determine all the macroscopic properties of any system and govern the chemical, electrical, magnetic, and physical processes. Similarly important, X-ray photoelectron microscopy (XPEEM), combined with the low-energy electron microscopy (LEEM), is indispensable in probing the complexity of chemical, structural, electronic and magnetic properties of surfaces and shallow interfaces, with the spatial resolution of few tens of nanometer (nm). The Electron-Spectro-Microscopy beamline (ESM) has been recently commissioned at NSLS-II and is now in operation. The primary spectroscopic technique is photoemission, performed over a wide energy range with control of light polarization and in a variety of flux/resolution conditions. The beamline has two experimental end stations that allow to perform ARPES and XPEEM/LEEM, separately. The ARPES end station focuses on high energy-resolution work, with spot-size of a few microns. The XPEEM/LEEM end station is a full-field microscope (XPEEM) operating either with the synchrotron generated X-rays (XPEEM), or with an internal electron gun (LEEM). Spatial resolution is crucial in studies of newly synthesized complex materials since they are often initially available only as small specimens (typically micron size). Furthermore, chemical inhomogeneities on surfaces are often an integral part of surface chemical processes. Finally, the ESM beamline with X-ray spots of few microns is optimized to study the electronic structure of novel materials with microscopy capabilities.

47 OTHER INSTRUMENTATION↗
NASA NTRSDate not supplied

Boundary Representation Tolerance Impacts on Mesh Generation and Adaptation

The control of discretization error is critical to obtaining reliable simulation results. Re-cent progress has matured anisotropic mesh adaptation, which automates discretization error control for complex geometries. However, the meshing process can fail when geometric model Boundary REPresentation (BREP) tolerances are larger than boundary layer surface nor-mal and tangential spacing requirements. Geometry sources are often created in Mechanical Computer-Aided Design (MCAD) systems, which are designed to produce models for manufacturing and not the stricter requirements of viscous flow analysis. BREP tolerances are strained by three factors: the inherent complexity of the model (e.g., large range of scales and complex topology), the numerical difficulties arising from surface/surface intersections, and the omission of crucial data during export and translation. Manual preparation of geometry is commonly employed to enable expert-guided mesh generation, which severely inhibits work-flow automation. Accommodation of loose BREP tolerances is required for automated mesh processes, because barrier issues may not be detected until well into the solution process. To raise awareness of this class of geometry issues and their impact on simulation, a survey of these barrier issues is presented with example mitigation techniques. This awareness may also impact geometry creation workflows to prevent the introduction of these artifacts.

CAD↗
NASA NTRS2019

Titan's Ionospheric Chemistry, Fullerenes, Oxygen, Galactic Cosmic Rays and the Formation of Exobiological Molecules on and within its Surfaces and Lakes

We discuss the formation of aerosols within Titan's thermosphere-ionosphere and the different chemical pathways. Negative ion measurements by the Cassini Plasma Spectrometer (CAPS) Electron Spectrometer (ELS) give evidence for formation of unsaturated anion carbon chains, while positive ion measurements of the Cassini Ion Neutral Mass Spectrometer (INMS) indicate formation of more aromatic cation hydrocarbons. There is presently no direct observational evidence for large neutral molecule growth in Titan's thermosphere-ionosphere. The hydrocarbon cations are expected to form Polycyclic Aromatic Hydrocarbons (PAH), those with the addition of nitrogen being called PAHNs. We theorize anion carbon chains can eventually become long enough to fold into fullerene C(60,70) carbon shells, of various charge states. Based on laboratory data the fullerenes can trap incoming O(sup +) magnetospheric ions that have relatively high energy collisions with the fullerenes and, once trapped, protect the oxygen atom from Titan's reducing thermosphere-ionosphere. The fullerenes can form into larger onion fullerenes and condense into larger embryo aerosols (i.e., m/q > 10,000 amu/q anions as observed by CAPS/ELS) eventually falling onto Titan's surface and precipitating to the bottom of its hydrocarbon lakes. Molecule production composed of H, C, N is known to occur in Titan's atmosphere with energy input from the magnetosphere, solar UV, and deeppenetrating irradiation from galactic cosmic rays (GCR). Space radiation effects by GCR irradiation of Titan's surface and lakes can lead to the manufacture of exobiological molecules with oxygen as the new ingredient. We have developed a model of galactic cosmic ray irradiation of Titan's atmosphere, surface, subsurface and bottoms of Titan lakes. GCR would provide further energy for processing of the aerosols into more complex organic forms such as tholins and precursor molecules for amino acids. A second process called hydrolysis then converts the precursor molecules into amino acids. Hydrolysis is provided via meteor impacts with size > 10 km and cryovolcanism both which can produce liquid water on Titan's surface for episodic periods > several 100 to 1000 years. Our model shows that GCR secondary particles can penetrate ~ 100 m below the ice surface (including the bottom of Titan's less dense hydrocarbon lakes ~ 150 m depths) and produce chemically significant dosages over very long timescales ~ 450 Myrs. The GCR model is combined with laboratory data from experiments in which dry methyl ices were irradiated to doses producing prebiotic amino acids such as glycine. The model calculations show glycine can form to ~ 2.5 ppb levels near the surface after ~450 Myrs of GCR proton irradiation and potentially to 5 ppb if heavy-ion GCRs up through Fe are included. If such molecules were detected, this would not only confirm this model but indicate that life forms different from ours may not be required.

Edward C. Sittler Jr↗
DOE OSTI2021

Development of Corrosion- and Erosion-Resistant Coatings for Advanced Ultra-Supercritical Materials

This final report summarized the research efforts and major findings of the Phase I Project “Development of Corrosion- and Erosion-Resistant Coatings for Advanced Ultra-Supercritical Materials”, for the period of October 1, 2019 – Sept. 30, 2021. This project is a collaborative endeavor between Tennessee Tech University, Purdue University, Oak Ridge National Laboratory, Siemens Corporation, and Eastern Plating, LLC, aiming at improving the durability and lifetime of high-pressure (HP) steam turbine blades in advanced ultra-supercritical (A-USC) coal-fired power plants through the development of corrosion/erosion-resistant coatings manufactured via a low-cost electrolytic codeposition process. While Tribaloy alloy T-400C was identified by the U.S. A-USC Materials Consortium as a promising coating composition, further composition optimization is needed to enhance its corrosion and erosion resistance for protecting the A-USC Ni-base turbine components. An integrated computational and experimental approach was employed to optimize coating composition/microstructure and processing parameters. In order to identify candidate coating compositions that could offer balanced properties, thermodynamic calculations were performed to explore the γ+Laves composition space in the Co-Ni-Cr-Mo-Si system with different alloying additions at 600-800 °C. Guided by the calculation results, experimental assessment of selected alloys led to the development of a new generation of Tribaloy compositions with the optimal levels of Cr, Mo and Si, reactive element (e.g., 0.4-0.6 wt.% Y) and other alloying additions. The low-cost and non-line-of-sight electro-codeposition process was employed to deposit a Ni(Co)-CrMoSiY composite coating on commercial Haynes 282 (H282) Ni-base alloy. A diffusion treatment was subsequently applied to convert the composite to the Tribaloy-type coating. Both the codeposition parameters and heat treatment conditions were varied to achieve the desired coating composition, microstructure and phase constituents. In addition, since additive manufacturing (AM) may be an alternative cost-saving option for potential A-USC turbine repair, laser direct deposition was explored to fabricate the H282 alloy with minimal defects. The electro-codeposited Tribaloy coating was also applied to the AM H282 substrate to demonstrate the viability of the coating process in improving the surface finish of AM alloys. Both high-temperature oxidation performance and solid particle erosion (SPE) resistance of model alloys and electro-codeposited coatings were evaluated. About 25 model alloys with various Cr/Mo ratios and reactive element levels, as well as partial substitution of Mo with Nb were evaluated with regard to their oxidation resistance in both air and pure steam at 760-800°C. Compositions based on Ni(Co)-20Cr-18Mo-2.6Si-0.6Y (wt.%) showed significantly improved oxidation resistance over the baseline T400-C. Based on the alloy development results, three generations of new Tribaloy coatings (Gen-1, Gen-2, and Gen-3) with various Mo/Cr contents and Y levels were prepared via electro-codeposition and their microstructure/performance were evaluated. Outstanding air and steam oxidation resistance was achieved for the Gen-2 and Gen-3 coatings. Furthermore, while the SPE resistance of the coatings depended on many factors such as temperature, environment, erodent, velocity and impact angle, the coated samples exhibited similar or better SPE resistance compared to the H282 substrate when magnetite was used as erodent (which is a realistic erodent in A-USC steam turbines). The new Tribaloy coatings also had good long-term compatibility with the H282 alloy substrate. The two large-sized rotating barrels were designed, constructed, and employed to coat dummy HP blades. Uniform coating thickness and microstructure were achieved at various blade locations. Also, a preliminary techno-economic analysis of the proposed coating process was conducted to quantify the cost-effectiveness and to assess the commercial viability of the corrosion- and erosion-resistant coatings. It is estimated that a cost reduction of ~30% could be achieved with the electro-codeposition coating process over the state-of-the-art high velocity oxygen fuel (HVOF) thermal spray. Compared to the leading Tribaloy coating technologies such as HVOF and plasma transfer alloying, electro-codeposition based process has advantages such as low-cost process equipment, uniform deposition even for complex shapes, low levels of contaminants/porosities, reduction of powder waste, and potentially better surface finish and longer turbine service life. The Phase 1 study has demonstrated that it is feasible to develop an electro-codeposited Tribaloy coating with balanced corrosion and erosion properties, even though additional research efforts such as further coating process scale-up and longer-term performance evaluation under realistic A-USC conditions are clearly needed.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Resolving experimental biases in the interpretation of diffusion experiments with a user-friendly numerical reactive transport approach

The reactive transport code CrunchClay was used to derive effective diffusion coefficients (D e ), clay porosities (ε), and adsorption distribution coefficients (K D ) from through-diffusion data while considering accurately the influence of unavoidable experimental biases on the estimation of these diffusion parameters. These effects include the presence of filters holding the solid sample in place, the variations in concentration gradients across the diffusion cell due to sampling events, the impact of tubing/dead volumes on the estimation of diffusive fluxes and sample porosity, and the effects of O-ring-filter setups on the delivery of solutions to the clay packing. Doing so, the direct modeling of the measurements of (radio)tracer concentrations in reservoirs is more accurate than that of data converted directly into diffusive fluxes. While the above-mentioned effects have already been described individually in the literature, a consistent modeling approach addressing all these issues at the same time has never been described nor made easily available to the community. A graphical user interface, CrunchEase, was created, which supports the user by automating the creation of input files, the running of simulations, and the extraction and comparison of data and simulation results. While a classical model considering an effective diffusion coefficient, a porosity and a solid/solution distribution coefficient (D e –ε–K D ) may be implemented in any reactive transport code, the development of CrunchEase makes it easy to apply by experimentalists without a background in reactive transport modeling. CrunchEase makes it also possible to transition more easily from a D e –ε–K D modeling approach to a state-of-the-art process-based understanding modeling approach using the full capabilities of CrunchClay, which include surface complexation modeling and a multi-porosity description of the clay packing with charged diffuse layers.

58 GEOSCIENCES↗
DOE OSTI2021

Distinct roles of land cover in regulating spatial variabilities of temperature responses to radiative effects of aerosols and clouds

Surface temperature responses to radiative perturbations due to aerosols and clouds are complicated by the land surface properties. To disentangle these complexities, this study, from a terrestrial surface energy budget perspective, isolates the underlying biophysical processes from the instantaneous radiative effects of aerosols and clouds on surface temperature using the National Center for Atmospheric Research Community Earth System Model version 1.2.1. It is found that in comparison with the global heterogeneous distributions of instantaneous radiative perturbations at the surface induced by aerosols and clouds, the spatial variations of the corresponding surface temperature responses to aerosol direct radiative effects (DRE) during the daytime and cloud radiative effects (CRE) during the nighttime are amplified. It is because of the consistent global distribution of the local surface climate sensitivity (a function of land cover properties such as surface roughness and Bowen ratio) with those of daytime DRE and nighttime CRE. By applying identical anthropogenic aerosol and precursor emissions over eight major past, present and projected future anthropogenic aerosol emitting regions (i.e. Brazil, China, East Africa, India, Indonesia, South Africa, United States and Western Europe), surface temperature responses to aerosol radiative cooling in the daytime and cloud radiative warming in the nighttime over these regions positively regulated by local surface climate sensitivities are prominent.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Deconvoluting sources of variability in aerosol jet printing using light scattering measurements

Aerosol jet printing (AJP) is a digital additive manufacturing technique for hybrid and conformal electronics, where its contactless deposition readily enables patterning over 3D surface topography. However, the complexity of aerosol transport physics makes deposition rate sensitive to process variability, hindering widespread industry adoption. Light scattering measurements have recently been demonstrated as a capable tool for measuring deposition rate in real time, enabling closed-loop control and in-situ qualification frameworks. These inline optical measurements present further opportunity as a diagnostic tool to understand the effects of secondary process parameters affecting vapor–liquid equilibrium and heat and mass transport during deposition. Downstream of the optical measurement cell, changing the sheath gas flow rate, increasing temperature via an inline heater, and adding solvent vapor via a sheath gas bubbler were observed to alter drying physics during sheath-collimation, and thereby impaction efficiency. Further upstream, the introduction of solvent vapor via a carrier gas bubbler and liquid build-up in the printhead were seen to affect the quantitative relationship between the light scattering data and the true deposition rate. Using this information, tightened controls of meaningful secondary parameters were implemented to improve the batch-to-batch consistency for printing a dielectric ink. In addition to advancing AJP process reliability for production, this work demonstrates the capability of inline optical measurements to provide insight into process physics and deconvolute competing mechanisms that underly variability.

additive manufacturing↗
DOE OSTI2022

Impacts of phase state and water content on secondary organic aerosol formation and partitioning (Final Technical Report)

Secondary organic aerosols (SOA) account for a major fraction of particulate matter in the atmosphere, affecting climate, air quality, and public health. SOA formation and evolution are highly complex processes involving both chemical reactions and transport of molecules in air, at particle surfaces, and within particles. The state of the matter, or “phase state,” comprising SOA can vary from a liquid, over an amorphous semi-solid, to a glassy solid, depending on chemical composition, water content, relative humidity (RH), and temperature. The occurrence of glassy and amorphous semi-solid states can pose limitations on the rate of transport of molecules, affecting gas-particle interactions and challenging the treatment of SOA in atmospheric models. The objective of this project was to improve fundamental understanding of the interplay of the phase state of particles and water content on the evolution of SOA formation. We have developed a method to estimate the glass transition temperature (T g ) of organic compounds to predict the phase state and viscosity of SOA. This method has been applied to high resolution mass spectrometry data of various types of SOA, achieving a good agreement with viscosity measurements. In addition, the viscosity estimation method was implemented into a regional model CMAQ to simulate diel and seasonal variations of SOA phase state over the U.S. Applying kinetic multilayer modeling, we analyzed laboratory experiments and ARM field measurements (e.g., HI-SCALE) on kinetic limitations of amine uptake. We have also conducted numerical simulations to estimate equilibration timescales of SOA partitioning. Overall, we have evaluated the impacts of phase state and water content on SOA lifecycle that should contribute to reducing the uncertainty of SOA representation in regional climate and air quality predictions. The project has yielded 17 publications, in which DE-SC0018349 is explicitly acknowledged. Please see the list of publications as below, followed by summary of research activities.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

Ventifact evolution in Wright Valley, Antarctica.

Ventifacts occurring on extensive wind-deflated surfaces throughout the ice-free Wright Valley are the product of complex evolutionary processes. The wind produces a lag gravel which continues to evolve at a reduced rate as coarser granule and gravel fractions are removed. The morphology of ventifacts forming the lag gravels suggests that the distribution of wind-polished faces is determined largely by the shape of the original unpolished rock fragments. In the early stages ventifacts tend to be oriented either transverse or parallel to the wind direction. Salt weathering is also a major factor in determining the morphology of the Wright Valley ventifacts.

Lindsay, J. F.↗