Search NASA⌕ Search

SEARCH · Search NASA

Results for “TGA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Structural characterization of sugarcane lignins extracted from different protic ionic liquid pretreatments

Previous studies based on protic ionic liquids have shown them to be effective for extracting lignins from biomass. Moreover, ILs synthesized with amine cations can promote the insertion of nitrogen into lignin, favoring its valorization for industrial applications. Here, lignins extracted from sugarcane bagasse by eight different PILs were analyzed. Several techniques of characterization were employed (2D HSQC NMR, 31P NMR, GPC, Py-GC/MS, TGA, FTIR, and elemental analysis), seeking a deeper understanding of lignin structure post-PILS treatment. In particular, lignin obtained with acetate and lactate anions with monoethanolamonium cations showed similar structural compositions. Lignins obtained from ethylenediamonium cation combined anions acetate and lactate exhibited relatively higher molecular weights compared to the other lignins studied. The elemental analysis of these lignins further revealed the presence of nitrogen in their structures, suggesting that amination occurred. In this work we used PILs not yet reported in the literature for this purpose, and consequently obtained lignins with specific structures. Overall, our results demonstrated that depending on the PILs used, lignins with distinct properties could be obtained which might be used for value-added applications. This work covered new advances in elucidation of lignin chemical structure and opened a new path for lignin valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Determination of the regeneration energy of direct air capture solvents/sorbents using calorimetric methods

Regeneration energy and recyclability are important parameters that dictate the viability of a CO 2 direct air capture (DAC) process. In this study, differential scanning calorimetry (DSC) is used in conjunction with thermogravimetric analysis (TGA) and Fourier Transform Infrared Spectroscopy (FTIR) to evaluate the regeneration energy required for CO 2 -loaded 3 M aqueous potassium sarcosinate (K-SAR) solvent and crystalline methyl-glyoxal-bisiminoguanidine (MGBIG) sorbent. Based on calorimetric measurements, for aqueous K-SAR, the sensible heat amounts to 1.5 GJ/tCO 2 and the enthalpy of desorption is estimated at 3.68 GJ/tCO 2 . The total energy of regeneration will also include the enthalpy of solvent vaporization, which will depend on the thermodynamic conditions and the level of regeneration. For MGBIG, the total regeneration energy required was measured at approximately 7.0 GJ/tCO 2 . Further, FTIR measurements were used to observe CO 2 and H 2 O release during the thermal regeneration process. For K-SAR, CO 2 release is seen to take place at temperatures greater than 80 °C and, for MGBIG, the CO 2 release takes place at temperatures greater than 100 °C. The moderate temperatures required for K-SAR and MGBIG regenerations compared to other DAC solvents/sorbents suggest that low-cost sources of heat, such as geothermal heat, could potentially be used for regeneration to drive down the cost of direct air capture.

42 ENGINEERING↗
DOE OSTI2024

Exploring the Influence of Linker Substitution and Ratios on Cooperative Framework Flexibility through the Mixed-Linker Approach

Cooperatively flexible metal–organic frameworks that exhibit step-shaped, or Type V-like, adsorption–desorption profiles can lower requisite pressure–temperature swings and thus energy input, necessary for an array of gas storage, delivery, and separations applications. However, such benefits are lost if the pressure threshold of the adsorption and desorption steps at a given temperature does not match the conditions dictated by the application, such as H 2 storage and delivery or olefin–paraffin separations. Unfortunately, the discovery of cooperatively flexible frameworks remains wholly serendipitous and de novo design remains impossible. Accordingly, there is a great need to further our understanding of flexibility such that we can intuitively derivatize known frameworks and, ultimately, design entirely new ones to meet the requisite conditions of energy-consumptive processes. In this work, we demonstrate that the mixed-linker, or multivariate, approach is a powerful tool for the derivation of a known flexible framework, with variances in linker substitution and ratio giving rise to a family wherein significant changes to the step-shaped adsorption–desorption profiles for multiple adsorbates are observed. Specifically, we report 12 isostructural mixed-linker derivatives of CdIF-13 (sod–Cd(benzimidazolate) 2 ) with six point-modified benzimidazole linkers spontaneously synthesized through prototypical solvothermal conditions. Furthermore, each is shown by PXRD to exhibit similar reversible flexibility to CdIF-13 and by TGA and DSC to be similarly thermally stable. Isothermal gas adsorption measurements with N 2 at 77 K, CO 2 at 195 K, and propane at 298 K demonstrate the wide-ranging, adsorbate-dependent effects of linker substitution and ratio, including dramatic reductions in the adsorption threshold pressure, evolution of multiple steps, and complete absence of observable adsorption. Aided by prior crystallographic characterization of CdIF-13, the observed trends were analyzed in an attempt to resolve the influence of linker substitution and ratios on structural behavior. In total, this work illustrates how the mixed-linker approach enables the synthesis and study of a large catalog of functionally modified frameworks, which can help identify the variables that influence flexibility and sorption behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Crystal Growth of Quaternary RE 2 EuSi 2 S 8 ( RE = Ce–Nd, Sm, Gd, Tb) Using Flux-Assisted Boron Chalcogen Mixture (BCM) Method: Investigation of Magnetic and Luminescence Properties

A series of quaternary rare-earth containing thiosilicates with the general formula RE 2 EuSi 2 S 8 (RE = Ce–Nd, Sm, Gd, Tb) has been synthesized via the flux-assisted boron chalcogen mixture (BCM) crystal growth method. High-quality single crystals were obtained, and their crystal structures were determined by single-crystal X-ray diffraction. The RE 2 EuSi 2 S 8 series crystallizes in the trigonal system, adopting the space group R-3c. Polycrystalline samples were employed for physical property measurements, including magnetic susceptibility measurements, UV–visible diffuse reflectance, and photoluminescent response. Magnetic data of RE 2 EuSi 2 S 8 ( RE = Ce, Nd, and Gd) were collected over the 2–300 K temperature range. The samples were paramagnetic behavior with negative Weiss constants (θ W = −11.05, −10.55, and −1.35 K respectively). Their thermal stability was investigated using thermogravimetric analysis (TGA). Optical band gaps, estimated from diffuse reflectance spectra, were determined to be 2.2(1) eV for Ce 2 EuSi 2 S 8 , 1.8(1) eV for Nd 2 EuSi 2 S 8 , and 1.7(1) eV for Gd 2 EuSi 2 S 8 respectively. Finally, photoluminescence measurements were collected on Ce 2 EuSi 2 S 8 and Tb 2 EuSi 2 S 8 single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Deactivation of Mo/H-ZSM-5 in Microwave-Assisted and Thermal-Driven Methane Dehydroaromatization

A better understanding of catalyst deactivation is needed to improve catalyst design and performance in microwave-enhanced methane dehydroaromatization (MDA). Here, this study investigates the deactivation of a molybdenum supported H-ZSM-5 zeolite (Mo/H-ZSM-5) catalyst in MDA under microwave-heated conditions, comparing its performance to that of the same catalyst under conventional heating. While the microwave-assisted (MW) process achieved higher benzene yields, the catalyst experienced faster deactivation due to the selective and rapid deposition of coke within the pores of the zeolite, as confirmed through Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), ammonia-temperature programmed desorption (NH 3 -TPD), thermal gravimetric analysis (TGA), temperature programmed oxidation (TPO), and X-ray photoelectron spectroscopy (XPS) analyses. The quantification of total coke content via TGA/TPO and surface carbon (XPS) revealed that nearly twice as much coke was deposited on the catalyst under MW conditions compared to that on the conventionally heated material, and the coke exhibited a more conductive and graphitic nature. The accelerated deactivation rates were attributed to the formation of hot spots in the MW system, leading to enhanced coupling with coke formed in situ during the reaction and resulting in increased Mo reduction. Observations indicated that the CO activation used to carburize the catalyst prior to the reaction is not advantageous in the MW heating environment. The presence of large amounts of Mo oxides at elevated temperatures (through hot spots) exposed to methane leads to instability under the reaction conditions. Optimizing the activation environment and improvement of the Mo dispersion within the pores are potential strategies to improve catalyst stability.

Mo/H-ZSM-5 zeolite↗
DOE OSTI2020

Particle-Scale Reduction Analysis of CuFeMnO 4 with Hydrogen for Chemical Looping Combustion

In this work CuFeMnO 4 (copper iron manganese oxide) oxygen carrier was characterized using DSC/TGA, in-situ XRD, and SEM-EDS to gain a clear elucidation of the chemical looping combustion (CLC) reactions with H2 which is a component of synthesis gas. A reaction model which best described the experimental TGA reaction data was selected from the analysis. Intrinsic rate of reaction parameters obtained from the study could be used for designing a reactor for scale-up. A model with combined contributions from nucleation and growth model and dimensional phase boundary model was found to exhibit the best correlation with the experimental data. The analysis provided validation of intrinsic reaction rates and other rate parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Study of the Hydrogen Pretreatment of Gallium and Platinum Promoted ZSM-5 for the Ethane Dehydroaromatization Reaction

Here, the performances of gallium and platinum promoted ZSM-5 catalysts, fresh and reduced, were studied for the dehydroaromatization of ethane to aromatics. Fresh and reduced 2% Ga/ZSM-5, 1.5% Ga–0.5% Pt/ZSM-5, and 0.5% Pt/ZSM-5 were tested in a fixed-bed reactor system at 615 °C for 2 h time on stream. It was observed that the hydrogen reduction of the fresh Pt-containing catalysts led to an increase in catalytic conversion. The addition of platinum to the gallium catalyst resulted in an increase in the reducibility of the Ga species on the surface of the zeolite. The GaPt catalysts exhibited an increase in ethane conversion and the stability of aromatic production selectivity over the Ga and Pt catalysts. The as-prepared fresh catalysts were characterized by ICP and BET methods. The fresh and reduced catalysts were further analyzed by XRD, H 2 -TPR, XPS, pyridine DRIFTS, TGA, and TEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Understanding and Mitigating Stickiness in Biochar Produced through Acid Hydrolysis and Dehydration

Levulinic acid is a platform chemical with significant potential for conversion into a wide range of biobased chemicals and fuels. A common process for producing levulinic acid from lignocellulosic feedstocks involves acid hydrolysis and dehydration (AHDH), where hexose polymers are hydrolyzed into monomeric sugars and subsequently dehydrated to levulinic acid and formic acid in the presence of dilute sulfuric acid. However, scaling the AHDH process is challenging because of the formation of byproducts such as sticky biochar, which accumulates in continuous-flow reactors, reducing effective reaction volume and increasing process downtime. This study investigates the effect of a chemical preconditioning step on mitigating sticky biochar formation. Woody biomass was preconditioned at 170 °C with 0.26 wt % sulfuric acid for 30 min, resulting in substantial removal of hemicellulose and acid-soluble lignin. AHDH of these preconditioned solids produced biochar that did not adhere to reactor surfaces. TGA analysis confirmed that the chemical preconditioning step minimized interactions between hemicellulose-derived degradation products and lignin side chains, reducing sticky char formation. Additionally, the study observed a 6% higher yield of organic acids from softwood species compared to hardwoods, with bark content shown to negatively impact yield. These findings suggest that targeted preconditioning of lignocellulosic biomass can enhance reactor operability and improve organic acid production efficiency in AHDH processes.

biopolymers↗
DOE OSTI2020

Size Dependence of Lattice Parameter and Electronic Structure in CeO2 Nanoparticles

Intrinsic properties of a compound (e.g. electronic structure, crystallographic structure, optical and magnetic properties) define notably its chemical and physical behavior. In the case of nanomaterials, these fundamental properties depend on the occurrence of quantum mechanical size effects and on the considerable increase of the surface to bulk ratio. However, the literature on this size-dependence and on the involved mechanisms is quite elusive and scarce. Here, we explore the size-dependence of both crystal and electronic properties of CeO2 nanoparticles (NPs) with different sizes by state-of-the art spectroscopic techniques. XRD, XPS and HERFD-XANES demonstrate that the as-synthesized NPs crystallize in the fluorite structure and they are predominantly composed of CeIV ions. The strong dependence of the lattice parameter with the NPs size was attributed to the presence of adsorbed species at the NPs surface thanks to FTIR and TGA measurements. In addition, the size-dependence of the eg level in the Ce LIII XANES spectra was experimentally observed by HERFD-XANES and confirmed by theoretical calculations.

Lanthanide, CeO2, HEFRD-XANES, Electronic structur↗
DOE OSTI2022

Formation of 6H-Ba 3 Ce 0.75 Mn 2.25 O 9 during Thermochemical Reduction of 12R-Ba 4 CeMn 3 O 12 : Identification of a Polytype in the Ba(Ce,Mn)O 3 Family

The resurgence of interest in a hydrogen economy and the development of hydrogen-related technologies has initiated numerous research and development efforts aimed at making the generation, storage, and transportation of hydrogen more efficient and affordable. Solar thermochemical hydrogen production (STCH) is a process that potentially exhibits numerous benefits such as high reaction efficiencies, tunable thermodynamics, and continued performance over extended cycling. Although CeO 2 has been the de facto standard STCH material for many years, more recently 12R-Ba 4 CeMn 3 O 12 (BCM) has demonstrated enhanced hydrogen production at intermediate H 2 /H 2 O conditions compared to CeO 2 , making it a contender for large-scale hydrogen production. However, the thermo-reduction stability of 12R-BCM dictates the oxygen partial pressure (pO 2 ) and temperature conditions optimal for cycling. In this study, we identify the formation of a 6H-BCM polytype at high temperature and reducing conditions, experimentally and computationally, as a mechanism and pathway for 12R-BCM decomposition. 12R-BCM was synthesized with high purity and then controllably reduced using thermogravimetric analysis (TGA). Synchrotron X-ray diffraction (XRD) data is used to identify the formation of a 6H-Ba 3 Ce 0.75 Mn 2.25 O 9 (6H-BCM) polytype that is formed at 1350 degrees C under strongly reducing pO 2 . Density functional theory (DFT) total energy and defect calculations show a window of thermodynamic stability for the 6H-polytype consistent with the XRD results. These data provide the first evidence of the 6H-BCM polytype and could provide a mechanistic explanation for the superior water-splitting behaviors of 12R-BCM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Trickier than It Looks: Isomerization between Five- and Six-Coordinated Zinc in Heterometallic Li 2 Zn 2 Molecule

This report describes the synthesis and characterization of two hetero bi metallic Li–Zn coordination isomers [Li 2 Zn 2 (tbaoac) 6 ] (tbaoac = tert -butyl acetoacetato) that have been isolated separately by the same stoichiometric reaction run in different organic solvents. The 6-coordinated zinc isomer ( 6-Zn ) was synthesized in acetone with high yield, while the 5-coordinated one ( 5-Zn ) was readily obtained from ethanol. The 5-Zn isomer has a low solubility in organic solvents such as alkanes and haloalkanes, while its 6-Zn counterpart exhibits a good solubility in almost all common solvents. Two isomeric molecules feature similar centrosymmetric tetranuclear cyclic assemblies, which are different in their arrangement of tbaoac ligands. While all ligands act as μ 2 -type in the structure of 5-Zn , the two tbaoac groups chelating Li appear as μ 3 -type in 6-Zn , thus providing an additional coordination for Zn ions. However, the real structural transformation between these isomers was shown to be more complex than simply making or breaking a couple of Zn–O bonds. X-ray single-crystal structure analysis, powder X-ray diffraction, multinuclear NMR, DART mass spectrometry, ICP-OES analysis, and TGA have been employed for the characterization of the isomers. The combination of powder X-ray diffraction and 1 H NMR investigation revealed that 6-Zn isomer can be quantitatively transformed to 5-Zn in ethanol, while the reverse conversion instantly takes place in acetone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The Explosive Hazards of Icosahedral Carboranes and Dodecaborate with Common Oxidizers and Salts

Carboranes find use in a wide variety of applications ranging from specialty catalysts to medicinal uses. Certain functionalized carboranes are described as explosive materials, although their nonfunctionalized precursors are regarded as inherently stable and not explosive. Herein, we report new findings on the sensitization of nonfunctionalized 12-vertex ortho-, meta-, and para-carboranes as well as dodecaborate in physical mixtures with several common inorganic salts. These mixtures were evaluated for explosive properties with drop hammer impact tests, friction tests, and differential scanning calorimetry thermal gravimetric analysis (DSC-TGA). Results indicate explosive sensitization to mechanical stimuli for the nonfunctionalized carboranes tested with a wide variety of inorganic salts, especially oxidizers. Sensitization of these compounds has not previously been reported, and raising awareness to the broader scientific community on this matter is warranted, especially as several of the mixtures evaluated are more sensitive to mechanical stimuli than primary explosives such as lead azide or pentaerythritol tetranitrate.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Additive Molar Volumes in Amorphous Ca/Sr Carbonate Solid Solutions

The development of predictive models of minor element incorporation in crystalline carbonate end products requires an understanding of the fundamental controls on metastable intermediate phase composition. In this study, we used small-angle X-ray scattering (SAXS), X-ray pair distribution function (PDF), thermogravimetric analysis (TGA), inductively coupled plasma mass spectrometry (ICP-MS), and transmission electron microscopy (TEM) to determine the composition-dependent density of an amorphous calcium–strontium carbonate (ACSC) solid solution. The amorphous calcium carbonate (ACC) and strontium carbonate (ASC) measured densities were ρ ACC = 2.19 ± 0.04 g/cm 3 and ρ ASC = 2.97 ± 0.05 g/cm 3 . Throughout our work, the experiments showed a dependence of the water content of the amorphous solid solution on the Sr mole fraction. An equation that relates the molar volume to the average cation radius, the carbonate ion radius, and the water volume was parameterized for hydrated crystalline carbonates and predicted well the molar volume of the ACSC solid solution. This finding indicates that, as for hydrated crystalline carbonates, the molar volumes of amorphous carbonates are additive and that water is a structural component of ACSC. Ab initio molecular dynamics (AIMD) simulations of the ACSC solid solutions showed strong linear correlations between calculated molar volumes and Sr and H 2 O contents, thus supporting the experimental results. In conclusion, our findings highlight the need to consider the full CaCO 3 –MeCO 3 –H 2 O ternary when quantifying metal cation incorporation in ACC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Design, Synthesis, and Characterization of Polymer Precursors to Li x PON and Li x SiPON Glasses: Materials That Enable All-Solid-State Batteries (ASBs)

LiPON-like glasses that form lithium dendrite impenetrable interfaces between lithium battery components are enabling materials that may replace liquid electrolytes permitting production of all-solid-state batteries (ASBs). Unfortunately, to date, such materials are introduced only via gas-phase deposition. Furthermore, we demonstrate the design and synthesis of easily scaled, lowtemperature, low-cost, solution-processable inorganic polymers containing LiPON/LiSiPON elements. OPCl 3 and hexachlorophosphazene [Cl 2 P=N] 3 provide starting points for elaboration using MNH 2 (M = Li/Na) or (Me 3 Si)NH followed by reaction with controlled amounts of LiNH 2 to produce oligomers/polymers with molecular weights (MWs) ≈1–2 kDa characterized by multinuclear NMR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and matrix-assisted laser desorption/ ionization (MALDI)-time-of-flight (ToF) offering stabilities to 150–200 °C and ceramic yields (800 °C) of 50–60%. 7 Li NMR suggests that precursor-bound Li + dissociates easily, beneficial for electrochemical applications. XPS shows higher N/P ratios (1–3) than via gas-phase methods (<1) correlating N/P ratios, 7 Li shifts, and Li + conductivities. Li 2 SiPHN offers the highest ambient conductivity of 3 × 10 –1 mS cm –1 at 400 °C/2 h/N 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Analysis of the Amorphous and Interphase Influence of Comononomer Loading on Polymer Properties toward Forwarding Bioadvantaged Copolyamides

In this paper we present an approach for selectively modifying the properties of semicrystalline polymers by introducing “bioadvantaged” counits. With this approach, the unique functionality of biomass can be leveraged to tailor the properties of the amorphous phase of semicrystalline polymers with minimal impact on crystallinity and thermomechanical properties. As a model case, PA 6,6 copolyamides were produced using the bioadvantaged monomer trans-3-hexenedioic acid (t3HDA). The analogous structure of t3HDA to adipic acid, a PA 6,6 monomer, allows for seamless integration. Screening over the entire composition range identified the t3HDA loading (20 mol%) beyond which properties deviate appreciably from Nylon 6,6. Once identified, copolyamides of suitable compositions were upgraded to commercial quality and fully characterized to assess the influence of counit loading and polymer structure on thermal and mechanical properties. Samples were characterized using gel permeation chromatography (GPC), proton nuclear magnetic resonance spectroscopy (1H NMR), heteronuclear single quantum coherence spectroscopy (HSQC), wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), tensile testing, flexural testing, and water absorption testing. t3HDA units were shown to hydrate during the harsh polycondensation to 3-hydroxyhexanedioic acid (3HHDA) and fully incorporate into the polymer backbone. Loading levels up to 20% were shown to have comparable thermal and mechanical properties in the dry state, yet moisture absorption—a known method for improving the toughness, yield strain, and elongation of polyamides—was enhanced by over 100% at 20% loading. This case study on bioadvantaged copolymers elucidates the governing structure-function principles that can be leveraged to forward value-added renewable polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Machine-Learning-Driven Discovery of Water Splitting BaFe 2 O 4 and Human-in-the-Loop Improvement via Al-Substitution for Increased Thermal Stability

Thermochemical hydrogen (TCH) production offers a promising method for converting thermal energy into hydrogen fuel through heat-driven redox cycles of metal oxides. Here, in this work a defect graph neural network (dGNN) was used to predict oxygen vacancy formation energies ΔH V O combined with Materials Project predictions of oxygen chemical potential stability to screen candidate oxides via high-throughput database analysis. BaFe 2 O 4 was identified as a promising material for experimental validation based on its predicted ΔH V O , oxygen chemical potential stability range, and potential for tunable substitutions to improve thermal properties. Experimental validation using thermogravimetric analysis (TGA), stagnation flow reactor (SFR), X-ray diffraction (XRD), and electron microscopy confirmed positive water-splitting behavior but also revealed limitations in thermal stability under aggressive reduction conditions. To address this, a human-in-the-loop modification strategy was employed introducing Al substitution in BaFe 2–x Al x O 4 ; this modification improves thermal stability, alters the crystal structure and enhances overall performance. These results demonstrate a combined computational and experimental workflow in which machine learning accelerates identification of promising candidates, while targeted experimental design enables optimization of functional performance. This approach advances the development of robust, cost-effective TCH materials and highlights the importance of integrating data-driven discovery with human-guided materials design in paving the way for scalable hydrogen production technologies.

organic↗