Search NASA⌕ Search

SEARCH · Search NASA

Results for “THEORIES - CYLINDERS, THIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

A wing-jet interaction theory for USB configurations

The aerodynamic interaction between the wing and an inviscid upper-surface blowing (USB) thick jet with Mach number nonuniformity is treated within the framework of a linear inviscid subsonic compressible flow theory. A two-vortex-sheet model for the jet surface is used to represent the induced flowfields inside and outside the jet. Comparison of the predicted results with experimental data shows good agreement in lift, induced drag, and pitching moment. It is shown that the thin jet flap theory is inadequate for USB configurations with thick jet.

Lan, C. E.↗
NASA NTRS1975

Theoretical aerodynamics of upper-surface-blowing jet-wing interaction

A linear, inviscid subsonic compressible flow theory is formulated to treat the aerodynamic interaction between the wing and an inviscid upper-surface-blowing (USB) thick jet with Mach number nonuniformity. The predicted results show reasonably good agreement with some available lift and induced-drag data. It was also shown that the thin-jet-flap theory is inadequate for the USB configurations with thick jet. Additional theoretical results show that the lift and induced drag were reduced by increasing jet temperature and increased by increasing jet Mach number. Reducing jet aspect ratio, while holding jet area constant, caused reductions in lift, induced drag, and pitching moment at a given angle of attack but with a minimal change in the curve of lift coefficient against induced-drag coefficient. The jet-deflection effect was shown to be beneficial to cruise performance. The aerodynamic center was shifted forward by adding power or jet-deflection angle. Moving the jet away from the wing surface resulted in rapid changes in lift and induced drag. Reducing the wing span of a rectangular wing by half decreased the jet-circulation lift by only 24 percent at a thrust coefficient of 2.

Lan, C. E.↗
NASA NTRS1991

Turbulization of shear flows in astrophysics

The problem of instability in shear flows is treated in a number of works which present a global analysis of irrotational (potential) modes in a 2-D compressible shear flow, implying that, in the presence of reflecting boundaries, those modes can increase and that the characteristic time of the increase is several orders as high as the dynamic time in the medium. Due to the slowness of the increase of irrotational modes and to the problematic character of the theory's applicability for thin accretion disks, an attempt was made to develop an alternative theory of turbulization shear flows. It is quite contrary to the above theory. Instead of the global analysis, a local one is made far from the flow boundaries. Instead of irrotational perturbations, vortical ones are examined. Lastly, the medium is considered to be incompressible. The flow in the accretion disk can be modeled by a plane Couette flow, without regard for boundary conditions: it can be modeled by a plane shear flow in infinite incompressible fluid. According to this scenario, there is a critical perturbation level in the free shear flow. If the level of initial perturbations exceeds the critical one, the flow is turbulized.

Chagelishvili, G. D.↗
NASA NTRS1981

High frequency scattering by a thin dielectric slab

The geometrical theory of diffraction (GTD) is applied to the problem of a source in the presence of a three-dimensional thin dielectric slab. It is assumed that the reflection and transmission properties of the slab are known, and the slab is not lossy and/or multilayered. Two-dimensional thin dielectric layer scattering is analyzed when diffraction emanates from a single point, the source is not near the slab, and random energy approaching tangentially due to transmission is negligible. Coefficients are obtained for the scattering and the GTD solution is extended to the three dimensional case after development of a ray fixed coordinate system. The results are applied to a half wavelength dipole mounted above a square polystyrene covered ground plane.

Burnside, W. D.↗
NASA NTRS1972

Bremsstrahlung from cylindrical beta sources.

Refined experimental measurements of the bremsstrahlung number and energy fluxes from thick cylindrical sources of several nuclides are presented, dose rates calculated from experimental energy fluxes are compared with theoretical results based on Wyard's thick-target approximation, and experiments are correlated with both thick- and thin-target bremsstrahlung theory to obtain accurate values of bremsstrahlung yields. The data presented should prove useful for the design of radioisotope power supplies, particularly those used in spacecraft and in biological applications.

Harris, D. W.↗
NASA NTRS1977

The charge-flow transistor - A new MOS device

A new device, the charge-flow transistor (CFT), has been developed to achieve integrated MOS compatibility in sensor applications, such as gas, humidity, and fire detection, where one is interested in monitoring the transverse resistance of a thin film. The resistive material is incorporated into the gate structure of the CFT in such a way that there is a time delay between the application of the gate-to-source voltage and the appearance of a complete channel. This time delay depends on the resistivity of the thin film. A theory of device operation is presented, together with experimental results on the first CFT's. These results confirm the principles of operation, and demonstrate the utility of the CFT for making fully integrated sensing devices.

Senturia, S. D.↗
NASA NTRS1978

Optimum wall impedance for spinning modes: A correlation with mode cut-off ratio

A correlating equation relating the optimum acoustic impedance for the wall lining of a circular duct to the acoustic mode cut-off ratio, is presented. The optimum impedance was correlated with cut-off ratio because the cut-off ratio appears to be the fundamental parameter governing the propagation of sound in the duct. Modes with similar cut-off ratios respond in a similar way to the acoustic liner. The correlation is a semi-empirical expression developed from an empirical modification of an equation originally derived from sound propagation theory in a thin boundary layer. This correlating equation represents a part of a simplified liner design method, based upon modal cut-off ratio, for multimodal noise propagation.

Rice, E. J.↗
NASA NTRS1978

Optimum wall impedance for spinning modes - A correlation with mode cut-off ratio

A correlating equation relating the optimum acoustic impedance for the wall lining of a circular duct to the acoustic mode cut-off ratio is presented and compared to exact calculations. The optimum impedance was correlated with cut-off ratio because the cut-off ratio appears to be the fundamental parameter governing the propagation of sound in the duct. Modes with similar cut-off ratios respond in a similar way to the acoustic liner. The correlating equation is useful for the design of suppressors for aircraft engine inlets having a steady mean flow with a boundary layer and spinning mode noise source excitation. The correlation is a semi-empirical expression developed from an empirical modification of an equation originally derived from sound propagation theory in a thin boundary layer. Exact calculations of the optimum wall impedance were made over a wide range of frequency parameters, boundary layer thicknesses and flow Mach numbers to develop and verify the correlation. This correlating equation represents a part of a simplified liner design method, based upon modal cut-off ratio, for multimodal noise propagation.

Rice, E. J.↗
NASA NTRS1982

HF produced ionospheric electron density irregularities diagnosed by UHF radio star scintillations

Three observations of radio star intensity fluctuations at UHF are reported for HF ionospheric modification experiments carried out at the Arecibo Observatory. Two observations at 430 MHz and one at 1400 MHz suggest that the the thin phase screen theory is a good approximation to the observed power spectra. It is noted, however, that the theory has to be extended to include antenna filtering. This type of filtering is important for UHF radio star scintillations since the antenna usually has a narrow beamwidth. HF power densities of less than 37 microwatts/sq m incident on the ionosphere give rise to electron density irregularities larger than 13% of the ambient density (at 260 km) having scale sizes of approximately 510 m perpendicular to the geomagnetic field. The irregularities are found to form within 20-25 s after the HF power is turned on. The drift velocities of the irregularities can be estimated from the observed power spectra.

Frey, A.↗
NASA NTRS1986

The laser interferometer skin-friction meter - A numerical and experimental study

Limits to the applicability of thin-film lubrication theory are established. The following two problems are considered: (1) the response of the oil film to a time-varying skin friction such as is encountered in turbulent boundary layers, and (2) a 'surface-wave instability' encountered at high skin-friction levels. Results corresponding to the first problem reveal that the laser interferometer skin-friction meter may, in principle, be applied to the measurement of instantaneous skin friction. In addressing the second problem, it is shown that the observed surface waves are not the result of a hydrodynamic instability.

Murphy, J. D.↗
NASA NTRS1989

Mixed finite element models for free vibrations of thin-walled beams

Simple, mixed finite element models are developed for the free vibration analysis of curved thin-walled beams with arbitrary open cross section. The analytical formulation is based on a Vlasov's type thin-walled beam theory with the effects of flexural-torsional coupling, transverse shear deformation and rotary inertia included. The fundamental unknowns consist of seven internal forces and seven generalized displacements of the beam. The element characteristic arrays are obtained by using a perturbed Lagrangian-mixed variational principle. Only C(sup o) continuity is required for the generalized displacements. The internal forces and the Lagrange multiplier are allowed to be discontinuous at interelement boundaries. Numerical results are presented to demonstrate the high accuracy and effectiveness of the elements developed. The standard of comparison is taken to be the solutions obtained by using 2-D plate/shell models for the beams.

Noor, Ahmed K.↗
NASA NTRS1989

Mixed finite element models for free vibrations of thin-walled beams

Simple, mixed finite element models are developed for the free vibration analysis of curved thin-walled beams with arbitrary open cross section. The analytical formulation is based on a Vlasov's type thin-walled beam theory with the effects of flexural-torsional coupling, transverse shear deformation and rotary inertia included. The fundamental unknowns consist of seven internal forces and seven generalized displacements of the beam. The element characteristic arrays are obtained by using a perturbed Lagrangian-mixed variational principle. Only C(sup o) continuity is required for the generalized displacements. The internal forces and the Lagrange multiplier are allowed to be discontinuous at interelement boundaries. Numerical results are presented to demonstrate the high accuracy and effectiveness of the elements developed. The standard of comparison is taken to be the solutions obtained by using 2-D plate/shell models for the beams.

Noor, Ahmed K.↗
NASA NTRS1994

Nonlinear stability of oscillatory core-annular flow: A generalized Kuramoto-Sivashinsky equation with time periodic coefficients

In this paper the nonlinear stability of two-phase core-annular flow in a pipe is examined when the acting pressure gradient is modulated by time harmonic oscillations and viscosity stratification and interfacial tension is present. An exact solution of the Navier-Stokes equations is used as the background state to develop an asymptotic theory valid for thin annular layers, which leads to a novel nonlinear evolution describing the spatio-temporal evolution of the interface. The evolution equation is an extension of the equation found for constant pressure gradients and generalizes the Kuramoto-Sivashinsky equation with dispersive effects found by Papageorgiou, Maldarelli & Rumschitzki, Phys. Fluids A 2(3), 1990, pp. 340-352, to a similar system with time periodic coefficients. The distinct regimes of slow and moderate flow are considered and the corresponding evolution is derived. Certain solutions are described analytically in the neighborhood of the first bifurcation point by use of multiple scales asymptotics. Extensive numerical experiments, using dynamical systems ideas, are carried out in order to evaluate the effect of the oscillatory pressure gradient on the solutions in the presence of a constant pressure gradient.

Coward, Adrian V.↗
NASA NTRS2010

More-Realistic Digital Modeling of a Human Body

A MATLAB computer program has been written to enable improved (relative to an older program) modeling of a human body for purposes of designing space suits and other hardware with which an astronaut must interact. The older program implements a kinematic model based on traditional anthropometric measurements that do provide important volume and surface information. The present program generates a three-dimensional (3D) whole-body model from 3D body-scan data. The program utilizes thin-plate spline theory to reposition the model without need for additional scans.

Rogge, Renee↗
NASA NTRS1956

Theoretical calculations of the pressure, forces, and moments at supersonic speeds due to various lateral motions acting on thin isolated vertical tails

Velocity potentials, pressure, distributions, and stability derivatives are derived by use of supersonic linearized theory for families of thin isolated vertical tails performing steady rolling, steady yawing, and constant-lateral-acceleration motions. Vertical-tail families (half-delta and rectangular plan forms) are considered for a broad Mach number range. Also considered are the vertical tail with arbitrary sweepback and taper ratio at Mach numbers for which both the leading edge and trailing edge of the tail are supersonic and the triangular vertical tail with a subsonic leading edge and a supersonic trailing edge. Expressions for potentials, pressures, and stability derivatives are tabulated.

Margolis, Kenneth↗