Search NASA⌕ Search

SEARCH · Search NASA

Results for “THIN WALL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Large structural, thin-wall castings made of metals subject to hot tearing, and their fabrication

An article, such as a gas turbine engine mixer, is made by providing a mold structure defining a thin-walled, hollow article, and a base metal that is subject to hot tear cracking when cast in a generally equiaxed polycrystalline form, such as Rene' 108 and Mar-M247. The article is fabricated by introducing the molten base metal into the mold structure, and directionally solidifying the base metal in the mold structure to form a directionally oriented structure. The directionally oriented structure may be formed of a single grain or oriented multiple grains.

Smashey, Russell W.↗
NASA NTRS1970

Thermocouple installation in thin-walled tubes

Brazing process attaches thermocouples to slot in type-347 stainless steel tube flush around its circumference. Electrolytic flashing with gold enhances brazing process. This installation procedure does not significantly change calibration of thermocouples used and does not cause major wear spots in the thin-walled devices.

Curren, A. N.↗
NASA NTRS1942

Strength tests of thin-walled elliptic duralumin cylinders in pure bending and in combined pure bending and torsion

An analysis is presented of the results of tests made by the Massachusetts Institute of Technology and by the National Advisory Committee for Aeronautics on an investigation of the strength of thin-walled circular and elliptic cylinders in pure bending and in combined torsion and bending. In each of the loading conditions, the bending moments were applied in the plane of the major axis of the ellipse.

Lundquist, Eugene E↗
NASA NTRS1972

NASTRAN buckling analysis of a thin walled cylinder

The computer run time required for a buckling analysis using NASTRAN is considerably greater than for a linear static analysis of the same structure. It is very important to obtain an optimal model size for the structure being analyzed, such that the model is neither so large as to increase running time unnecessarily, nor so small as to hinder accuracy. The problem of critical load accuracy versus model complexity is considered for a thin walled cylinder, using both Level 12 and Level 15 NASTRAN releases.

Wight, R. B.↗
NASA NTRS2002

Long-Term Creep of a Thin-Walled Inconel 718 Stirling Power-Convertor Heater Head Assessed

The Department of Energy and NASA have identified Stirling power convertors as candidate power supply systems for long-duration, deep-space science missions. A key element for qualifying the flight hardware is a long-term durability assessment for critical hot section components of the power convertor. One such critical component is the power convertor heater head. The heater head is a high-temperature pressure vessel that transfers heat to the working gas medium of the convertor, which is typically helium. An efficient heater head design is the result of balancing the divergent requirements of thin walls for increased heat transfer versus thick walls to lower the wall stresses and thus improve creep resistance and durability. In the current design, the heater head is fabricated from the Ni-base superalloy Inconel 718 (IN 718, Inco Alloys International, Inc., Huntington, WV). Although IN 718 is a mature alloy system (patented in 1962), there is little long-term (>50,000-hr) creep data available for thin-specimen geometries. Since thin-section properties tend to be inferior to thicker samples, it is necessary to generate creep data using specimens with the same geometry as the actual flight hardware. Therefore, one facet of the overall durability assessment program involves generating relatively short-term creep data using thin specimens at the design temperature of 649 C (1200 F).

Bowman, Randy R.↗
NASA NTRS1962

A REPORT ON THREE SERIES OF EXPERIMENTS AND THE DESCRIPTION OF A SIMPLIFIED MODEL OF THE THIN WALL CYLINDER AND CONE BUCKLING MECHANISM

Three series of experiments were performed to investigate the nature of the buckling phenomenon. They were: a) influence of an increasing dimple on the buckling load of a cylinder; b) investigation of the strain distribution on one cylinder, after one or more waves were imposed on it; c) measurements of lateral deflections at buckling. The results of such experiments give some support to the idea of a buckling model, which can be of eventual interest to the thin wall cylinder and cone buckling problem, where a non-linear system (the buckled band) is considered in series with a linear system (the unbuckled portion of the cylinder, plus the testing-machine )

CYLINDER↗
NASA NTRS2020

Buckling of Thin-Walled Circular Cylinders

Recent industry and NASA experience with the development of launch vehicle structures have indicated a need for updated monographs for the design of buckling-critical structures that account for state-of-the-art structural configurations, material systems, and computational tools. This monograph provides an update to NASA SP-8007 (circa 1965, and 1968) and was prepared under the cognizance of the NASA Engineering and Safety Center (NESC). It summarizes all significant knowledge and experience accumulated from the NESC Shell Buckling Knockdown Factor (SBKF) Assessment (NESC Assessment #: 07-010-E) to date for use in the design of buckling-critical thin-walled circular cylinders. The format and terminology used in this monograph is similar to previous versions of NASA SP-8007 for ease of understanding and implementation. In addition, as with the design recommendations contained in the previous versions of NASA SP-8007, this monograph is to be regarded as a guideline to design and not as a NASA requirement, unless specified in formal program requirements. Furthermore, it is expected that the guidelines presented in this monograph will be updated as appropriate. Designers are advised to stay abreast of updates in the state-of-the-art and corresponding design criteria.

Buckling↗
NASA NTRS1976

Proof test criteria for thin-walled 2219 aluminum pressure vessels. Volume 1: Program summary and data analysis

This experimental program was undertaken to investigate the crack growth behavior of deep surface flaws in 2219 aluminum. The program included tests of uniaxially loaded surface flaw and center crack panels at temperatures ranging from 20K (-423 F) to ambient. The tests were conducted on both the base metal and as-welded weld metal material. The program was designed to provide data on the mechanisms of failure by ligament penetration, and the residual cyclic life, after proof-testing, of a vessel which has been subjected to incipient penetration by the proof test. The results were compared and analyzed with previously developed data to develop guidelines for the proof testing of thin walled 2219 pressure vessels.

Finger, R. W.↗
NASA NTRS2001

Modeling of Fillets in Thin-Walled Structures for Dynamic Analysis

Relatively new developments in manufacturing methods have made it possible to produce machined parts with a wall thickness of less than 0.010". While the parts are being machined. Fillets of relatively large radius to thickness ratios are created by the milling tool. This paper discusses an accurate new technique for finite-element modeling of fillets for dynamic and stiffness analysis using efficient plate elements rather than more computationally intensive, high density solid meshes, A simple filleted cantilever beam of 0.040" thickness, 1.6" length, 1" depth, and 0.250" radius in the corner was modeled using both solid elements and several different plate element geometries. The finite element results were then compared with static and modal testing of a machined sample. The highest-scoring plate element technique uses a bridge of elements that is constructed through the tangent point of the Fillet radius such that the thickness of the element matches tile volume of the fillet. This model produces errors of less than 4.6 percent for static loading and less than 7.4 percent for modal analysis. This simple plate element technique will prove critical for efficient, timely, and accurate dynamic analysis of complex thin-walled structures.

Seugling, Richard M.↗
NASA NTRS1986

Leakproof Swaged Joints in Thin-Wall Tubing

Tubular inserts reinforce joints, reducing incidence of leaks. In new swaging technique, tubular inserts placed inside ends of both tubes to be joined. Made from thicker-wall tubing with outside diameter that matches inside diameter of thin tubing swaged, inserts support tube ends at joint. They ensure more uniform contact between swage fitting and tubing. New swaging technique developed for Al/Ti/V-alloy hydraulic supply lines.

Stuckenberg, F. H.↗
NASA NTRS1977

Electromagnetic scattering and absorption by thin walled dielectric cylinders with application to ice crystals

Important in the atmospheric heat balance are the reflection, transmission, and absorption of visible and infrared radiation by clouds and polluted atmospheres. Integral equations are derived to evaluate the scattering and absorption of electromagnetic radiation from thin cylindrical dielectric shells of arbitrary cross section when irradiated by a plane wave of any polarization incident in a plane perpendicular to the generators. Application of the method to infinitely long hexagonal cylinders has yielded numerical scattering and absorption data which simulate columnar sheath ice crystals. It is found that the numerical procedures are economical for cylinders having perimeters less than approximately fifteen free-space wavelengths.

Senior, T. B. A.↗