Search NASA⌕ Search

SEARCH · Search NASA

Results for “TMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

A Dual–Phase Electrolyte for High–Energy Lithium–Sulfur Batteries

Dissolution of lithium polysulfides (LiPSs) is essential for fast cathode kinetics, but detrimental for anode stability, especially under lean electrolyte conditions. Here in this work, the phase separation phenomenon between solvents with different polarities (tetramethyl sulfone [TMS] and dibutyl ether [DBE]) is utilized to enable the design of a dual-phase electrolyte. High-polarity, high-density TMS–lithium bis(trifluoromethanesulfonyl)imide–ammonium trifluoroacetate as the cathode electrolyte strongly solvates LiPSs, which propel the sulfur redox reaction. Moreover, the composite of DBE and a polymeric ion conductor serves as the anode electrolyte. The addition of DBE in the anode side effectively prevents the crossover of corrosive species (LiPSs and ammonia trifluoroacetate), enabling a significant improvement in Li-metal anode stability. The electrode-specific dual-phase electrolyte design provides electrochemical performance superior to conventional electrolytes. Without additional electrode engineering, pouch cells assemble with the dual-phase electrolyte cycle under a lean electrolyte (4 µL mg –1 ) and low-Li-excess condition (N/P = 3) for 120 cycles.

25 ENERGY STORAGE↗

Vacancy‐Enabled O3 Phase Stabilization for Manganese‐Rich Layered Sodium Cathodes

Abstract Manganese‐rich layered oxide materials hold great potential as low‐cost and high‐capacity cathodes for Na‐ion batteries. However, they usually form a P2 phase and suffer from fast capacity fade. In this work, an O3 phase sodium cathode has been developed out of a Li and Mn‐rich layered material by leveraging the creation of transition metal (TM) and oxygen vacancies and the electrochemical exchange of Na and Li. The Mn‐rich layered cathode material remains primarily O3 phase during sodiation/desodiation and can have a full sodiation capacity of ca. 220 mAh g −1 . It delivers ca. 160 mAh g −1 specific capacity between 2–3.8 V with >86 % retention over 250 cycles. The TM and oxygen vacancies pre‐formed in the sodiated material enables a reversible migration of TMs from the TM layer to the tetrahedral sites in the Na layer upon de‐sodiation and sodiation. The migration creates metastable states, leading to increased kinetic barrier that prohibits a complete O3‐P3 phase transition.

Xiao, Biwei↗

The helix⁻inversion mechanism in double₋stranded helical oligomers bridged by rotary cyclic boronate esters

Attracted by the numerous regulatory functions of double-helical biopolymers such as DNA, many researchers have synthesized various double-helical systems. A recently synthesized double-stranded helical oligomer covalently bridged by rotary boronate esters (BBDD) was shown to undergo helix-inversion that might serve as platform to design rotor systems. Yet, the detailed helix-inversion mechanism could not be investigated experimentally. Direct molecular dynamics simulations based on density-functional tight-binding energies and gradients computed on-the-fly reveal that disentanglement to the unraveled form and following exchange of the twisted terminal trimethylsilyl (TMS) groups are prerequisites for the observed helix-inversion. The possibility of mean force confirms that the originally assumed “concurrent” rotation of the boronate esters and the helix-inversion involves shorter time scale “step-wise” processes, triggered by the disentanglement and exchange of the TMS groups. These results suggest that inversion dynamics of double-helical molecules such as BBDD may be controllable by chemical fine-tuning of the terminal groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Corrosion of Magnesium in Multimaterial System

The TMS Magnesium Committee has been actively involved in presenting cutting-edge research and development and the latest trends related to magnesium and its alloys to industry and academia. Topics including magnesium alloy development, applications, mechanism of deformation and corrosion, thermomechanical processing, modelling, etc. have been captured year after year through the Magnesium Technology symposium and conference proceedings at TMS and through special topics in JOM. Every year, based on the unanimous endorsement from the industry and academia, a topic is selected to address the latest developments within this subject in JOM. In continuation with last year’s coverage of Advances and Achievements in In-Situ Analysis of Corrosions and Structure–Property Relationship in Mg Alloys,[1] this year’s topic focuses on the Corrosion of Magnesium in Multimaterial Systems. Magnesium, the lightest of all the structural materials, has garnered much interest in the transportation, electronics packaging, defense equipments and industries alike and are more commonly being incorporated in multimaterial design concepts.[2-4] However, the application of the same is limited due to its highly corrosive nature, and understanding and mitigating the corrosion of magnesium has been a major research challenge.

Joshi, Vineet V.↗

Effects of Co doping on the structure and physicochemical properties of hausmannite (Mn 3 O 4 ) and its transformation during aging

Hausmannite is a common low-valence manganese oxide mineral with a distorted spinel structure in surficial sediments. Although natural Mn oxides often contain various transition metal (TM) impurities, few studies have addressed the substitution mechanisms of TMs, such as cobalt (Co), with hausmannite and induced changes in the mineral physicochemical properties. In this study, Co-doped hausmannites with final Co/Mn molar ratios of 0.05 and 0.11 were synthesized and characterized by wet chemical analysis, powder X-ray diffraction (XRD), Fourier transformed infrared spectra (FTIR), high resolution transmission electron microscope (HRTEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure spectroscopy (XAFS). Co-doped samples have larger crystallite sizes and smaller specific surface areas than those of the hausmannite without Co. The Co cations exist in a mixed-valence of +3 and + 2. Powder XRD and acid dissolution experiments indicate that Co incorporates into the mineral structures, and increases the mineral structural stability. Co K-edge extended X-ray adsorption fine structure (EXAFS) analysis demonstrates that Co likely substitutes for lattice Mn(III). After aging at room temperature for three years, 14.1 ± 1.9% of pure hausmannite is transformed to manganite while only 2.6 ± 0.7% of manganite appears in the aged Co-doped sample with an initial Co/Mn molar ratio of 0.10. Finally, these results provide new insights into the incorporation mechanisms of TMs into low valence Mn oxides, and the stability of these minerals in natural environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sulfone-based electrolytes for high energy density lithium-ion batteries

Here, in this work, localized high concentration electrolytes (LHCEs) based on tetramethylene sulfone (TMS) were designed. Similar to LHCEs based on other solvents, TMS-based LHCEs can achieve excellent compatibility with high energy density lithium ion batteries (LIBs) when combined with a proper additive. By comparing LHCEs based on different solvents and additives, it was revealed that the unique solvation structure of LHCEs facilitates the synergetic decomposition of anion, solvent and additive in the solid electrolyte interphase (SEI) formation. Proper combinations of the three constituents of the solvation sheaths in LHCEs can promote the formation of highly effective SEI on graphite negative electrode. The absence of LiPF 6 in LHCEs also suppresses the degradation of positive electrode materials in LIBs. The superior interphasial properties of LHCEs is the key to realizing the long lifespan of high energy density LIBs.

25 ENERGY STORAGE↗

In Situ 29 Si solid-state NMR study of grafting of organoalkoxysilanes to mesoporous silica nanoparticles

We report that since the catalytic activity and the stability of silica-bound organometallic complexes are affected by their interactions with hydroxyl groups on the surface, isolated hydroxyls are often created prior to the introduction of catalytic species. Here, we investigate a method to remove the indigenous hydroxyls and create new isolated hydroxyls by grafting organo-trimethoxysilane (R-TMS) to generate a silicon T 2 site, (≡SiO-) 2 SiR(-OH). We used in situ 29 Si solid-state NMR experiments to monitor the evolution of T n sites, (≡SiO - ) n SiR(-OH) 3-n (n = 1, 2, 3). The study indicates that i) the grafting proceeds in a consecutive manner as T 1 → T 2 → T 3 , and ii) the kinetics depend on the type of functional groups in the silane. However, the rates of T 1 formation and T 2 → T 3 conversion are also controlled to a significant extent by the entropy loss associated to the initial silane binding and the spatial arrangement of surface hydroxyls, respectively. The grafting of R-TMS with a basic functional group leads to a lower concentration of T 1 sites. The nucleophilicity of the functional group facilitates the grafting process by lowering the enthalpy barrier, while the T 1 formation rate is more influenced by the entropy barrier than the T 1 → T 2 conversion rate. Thus, the basic functional group promotes the T 1 → T 2 conversion more than the T 1 formation, resulting in a lower concentration of T 1 sites.

36 MATERIALS SCIENCE↗

Stress-sensitivity of fracture conductivity of Tuscaloosa Marine Shale cores

Production decline from wells producing from shale rocks is typically quite rapid. One possible factor responsible for such decline is loss in fracture conductivity. This is true in the case of the Tuscaloosa Marine shale reservoir. In this work, the stress-dependent fracture conductivity of TMS core samples is investigated using five propped cores under varying stress conditions. In addition, the effects of static rock mechanical properties and rock mineralogy on conductivity decline are investigated. The mineralogy of each core sample was determined by X-ray Diffraction analysis. Fracture conductivity was measured using a Hassler-type pressure core holder with a pressure rating of 15,000 psi (103.42 MPa). Estimated rock mechanical properties showed that shale anisotropy could affect fracture conductivity. The time decline in conductivity revealed two possible decline trends, a) decline from the reduction in induced fracture width, and b) decline from the healing of developed micro-cracks. An exponential decline in fracture conductivity with increasing confinement pressure was observed with an average decline rate constant of 3.15 x 10 -10 mPa -1 . While rock mineralogy did not have any clear relationship with conductivity decline, the effects of rock mechanical properties were only important at 10.34 MPa confinement pressure and above. The observation showed that a high Young's modulus correlate to high conductivity, whereas a high Poisson's ratio correlate to low conductivity. This study provides useful observations for optimizing fracture design to enhance well productivity in the TMS.

02 PETROLEUM↗

Embryotoxic and pharmacologic potency ranking of six azoles in the rat whole embryo culture by morphological and transcriptomic analysis

Differential gene expression analysis in the rat whole embryo culture (WEC) assay provides mechanistic insight into the embryotoxicity of test compounds. In our study, we hypothesized that comparative analysis of the transcriptomes of rat embryos exposed to six azoles (flusilazole, triadimefon, ketoconazole, miconazole, difenoconazole and prothioconazole) could lead to a better mechanism-based understanding of their embryotoxicity and pharmacological action. For evaluating embryotoxicity, we applied the total morphological scoring system (TMS) in embryos exposed for 48 h. The compounds tested showed embryotoxicity in a dose-response fashion. Functional analysis of differential gene expression after 4 h exposure at the ID{sub 10} (effective dose for 10% decreased TMS), revealed the sterol biosynthesis pathway and embryonic development genes, dominated by genes in the retinoic acid (RA) pathway, albeit in a differential way. Flusilazole, ketoconazole and triadimefon were the most potent compounds affecting the RA pathway, while in terms of regulation of sterol function, difenoconazole and ketoconazole showed the most pronounced effects. Dose-dependent analysis of the effects of flusilazole revealed that the RA pathway related genes were already differentially expressed at low dose levels while the sterol pathway showed strong regulation at higher embryotoxic doses, suggesting that this pathway is less predictive for the observed embryotoxicity. A similar analysis at the 24-hour time point indicated an additional time-dependent difference in the aforementioned pathways regulated by flusilazole. In summary, the rat WEC assay in combination with transcriptomics could add a mechanistic insight into the embryotoxic potency ranking and pharmacological mode of action of the tested compounds. - Highlights: • Embryonic exposure to azoles revealed concentration-dependent malformations. • Transcriptomics could enhance the mechanistic knowledge of embryotoxicants. • Retinoic acid gene set identifies early embryotoxic responses to azoles. • Toxic versus pharmacologic potency determines functional efficacy.

60 APPLIED LIFE SCIENCES↗

Influence of Rare-Earth Ion Radius on Metal–Metal Charge Transfer in Trinuclear Mixed-Valent Complexes

We report the synthesis and characterization of a highly conjugated bisferrocenyl pyrrolediimine ligand, Fc 2 PyrDIH (1), and its trinuclear complexes with rare earth ions—(Fc 2 PyrDI)M(N(TMS) 2 ) 2 (2-M, M = Sc, Y, Lu, La). Crystal structures, NMR spectra, and UV/Vis-NIR data are presented. The latter are in good agreement with DFT calculations, illuminating the impact of the rare earth ionic radius on NIR charge transfer excitations. For [2-Sc] + , the charge transfer is at 11500 cm -1 , while for [2-Y] + only a d-d transition at 8000 cm -1 is observed. Lu has an ionic radius in between Sc and Y, and the [2-Lu] + complex exhibits both transitions. From TDDFT analysis we assign the 11500 cm -1 transition as a mixture of MLCT and MMCT, rather than pure metal-to-metal CT, because it has significant ligand character. Typically, the ferrocenes have high rotational freedom in bis-ferrocenyl mixed valent complexes. However, in the present (Fc 2 PyrDI)M(N(TMS) 2 ) 2 complexes, ligand-ligand repulsions lock the rotational freedom, so that rare earth ionic radius-dependent geometric differences increasingly influence orbital overlap as the ionic radius falls. The Marcus-Hush coupling constant HAB trends as: [2-Sc] + >[2-Lu] + >[2-Y] +

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ligand Influence on Indium–Sulfide Cluster Formation and Reactivity

An indium–sulfide tetramer ([InMe 2 (SSiMe 3 )] 4 ), which contains reactive silyl and methyl groups, is shown to be an isolable intermediate in cluster synthesis. The reactive groups allow it to act as a synthon in the formation of multinuclear indium–sulfide architectures, evidenced by the crystallization of a coordination polymer ([In 20 S 14 Me 32 (4,4’-bpy) 5 ·5CH 2 Cl 2 ] n ) utilizing In 10 S 7 clusters as nodes. The reaction between trimethylindium (InMe 3 ) and bis­(trimethylsilyl)­sulfide (S­(SiMe 3 ) 2 ) is explored with and without the presence of a ligating bipyridine. In both cases, a sulfide-indium adduct is formed, which slowly converts into a multimetallic complex. Here, the ligand 2,2’-bipyridine (2,2’-bpy) is coordinated to InMe 3 to form the adduct InMe 3 (bpy), which upon addition of sulfide, eliminates tetramethylsilane (TMS) and binds two additional InMe 3 moieties (InMe 2 (bpy)­(μ 3 -SSiMe 3 )­(InMe 3 ) 2 ). When reacted neatly without bipyridine, InMe 3 and S­(SiMe 3 ) 2 form the adduct InMe 3 (S­(SiMe 3 ) 2 ), which subsequently eliminates TMS and intermolecularly associates to yield [InMe 2 (SSiMe 3 )] 4 . Although stable in an inert atmosphere, [InMe 2 (SSiMe 3 )] 4 undergoes facile hydrolysis to yield [InMeS] n when exposed to air. The effect of ligand addition (4,4’-bipyridine (4,4’-bpy)) to [InMe 2 (SSiMe 3 )] 4 is then examined. In every case, it is shown that the presence of the bpy ligand has a profound influence on the resulting structure, as shown by the unexpected formation of a trimer and In 10 S 7 cluster network.

Bell, Colby Seth [Argonne National Laboratory (ANL↗

Structure of a eukaryotic cholinephosphotransferase-1 reveals mechanisms of substrate recognition and catalysis

Phosphatidylcholine (PC) is the most abundant phospholipid in eukaryotic cell membranes. In eukaryotes, two highly homologous enzymes, cholinephosphotransferase-1 (CHPT1) and choline/ethanolamine phosphotransferase-1 (CEPT1) catalyze the final step of de novo PC synthesis. CHPT1/CEPT1 joins two substrates, cytidine diphosphate-choline (CDP-choline) and diacylglycerol (DAG), to produce PC, and Mg 2+ is required for the reaction. However, mechanisms of substrate recognition and catalysis remain unresolved. Here we report structures of a CHPT1 from Xenopus laevis (xlCHPT1) determined by cryo-electron microscopy to an overall resolution of ~3.2 Å. xlCHPT1 forms a homodimer, and each protomer has 10 transmembrane helices (TMs). The first 6 TMs carve out a cone-shaped enclosure in the membrane in which the catalysis occurs. The enclosure opens to the cytosolic side, where a CDP-choline and two Mg 2+ are coordinated. The structures identify a catalytic site unique to eukaryotic CHPT1/CEPT1 and suggest an entryway for DAG. The structures also reveal an internal pseudo two-fold symmetry between TM3-6 and TM7-10, and suggest that CHPT1/CEPT1 may have evolved from their distant prokaryotic ancestors through gene duplication.

59 BASIC BIOLOGICAL SCIENCES↗

Nexus fermions in topological symmorphic crystalline metals

Topological metals and semimetals (TMs) have recently drawn significant interest. These materials give rise to condensed matter realizations of many important concepts in high-energy physics, leading to wide-ranging protected properties in transport and spectroscopic experiments. It has been well-established that the known TMs can be classified by the dimensionality of the topologically protected band degeneracies. While Weyl and Dirac semimetals feature zero-dimensional points, the band crossing of nodal-line semimetals forms a one-dimensional closed loop. In this paper, we identify a TM that goes beyond the above paradigms. It shows an exotic configuration of degeneracies without a well-defined dimensionality. Specifically, it consists of 0D nexus with triple-degeneracy that interconnects 1D lines with double-degeneracy. We show that, because of the novel form of band crossing, the new TM cannot be described by the established results that characterize the topology of the Dirac and Weyl nodes. Moreover, triply-degenerate nodes realize emergent fermionic quasiparticles not present in relativistic quantum field theory. We present materials candidates. Thus, our results open the door for realizing new topological phenomena and fermions including transport anomalies and spectroscopic responses in metallic crystals with nontrivial topology beyond the Weyl/Dirac paradigm.

36 MATERIALS SCIENCE↗

Chemical and structural evolutions of Li–Mn-rich layered electrodes at different current densities

Although the two active redox centers in Li-rich cathodes, including the anionic and cationic contributions, can enable Li-ion batteries to achieve outstanding specific energy, their behaviors at different current densities have not been clarified. In this report we provide a comparative study of transition metals (TMs) and oxygen redox activities by directly accessing their oxidation states in Li-rich materials operated at very different current rates. Our data reveal that the oxidation of oxygen in the near-surface region is at the same level for electrodes cycled with a wide range of current rates, indicating a reaction gradient of lattice oxygen redox reactions. The oxidation process of lattice oxygen is found to be dynamically compatible with that of the TMs. Combining the results of first principles calculations and complementary experimental findings, we propose a detailed mechanism of structural distortion from octahedral Li to tetrahedral Li and the role of oxygen vacancy in Li + diffusion. It is found that fast delithiation occurring at high current densities can easily cause local structural transformation, leading to a limited Li + diffusion rate and consequently suppressing rate capability.

25 ENERGY STORAGE↗

Crystallization of nanopore-confined imidazolium ionic liquids probed by temperature-resolved in situ grazing-incidence wide angle X-ray scattering (GIWAXS)

The crystallization behavior of ionic liquids (ILs) 1-butyl-3-methylimidazolium [BMIM] hexafluorophosphate [PF 6 ] and chloride [Cl] is investigated upon confinement in 2.3 or 8.2 nm diameter silica nanopore arrays, along with the effects of covalently modifying the pore walls with 1-(3-trimethoxysilylpropyl)3-methylimidazolium [TMS-MIM] + groups. In situ grazing-incidence wide angle x-ray scattering (GIWAXS) is performed during heating from as low as -110 °C to room temperature. Partially ordered “nanodomains” are observed in both ILs in the bulk molten state, but they are disrupted by nanoconfinement. Melting point depression consistent with capillary effects is observed for [BMIM][PF 6 ] in 2.3 nm pores. However, the melting point is elevated for [BMIM][PF 6 ] in 8.2 nm pores, which provide sufficient space to stabilize the crystalline phase. For [BMIM][Cl], crystallization is observed only in 8.2 nm bare silica pores, but the melting point is severely depressed. Tethering with IL-like [TMS-MIM + ] also promotes the crystallization of [BMIM][PF 6 ], resulting in elevated melting points. The combined effects of a larger pore size and pore surface tethering on [BMIM][PF 6 ] result in a single stable crystal phase that persists from -140 °C to 25 °C (vs. the bulk melting point of -11 °C). These results show that when ILs are used in confined systems, complex crystallization behavior can emerge depending on the counterion, pore size, and surface modification that require consideration of ion layering in the confined space in addition to surface free energy effects.

He, Yuxin [University of Kentucky, Lexington, KY (↗

Developments in deep brain stimulation using time dependent magnetic fields

The effect of head model complexity upon the strength of field in different brain regions for transcranial magnetic stimulation (TMS) has been investigated. Experimental measurements were used to verify the validity of magnetic field calculations and induced electric field calculations for three 3D human head models of varying complexity. Results show the inability for simplified head models to accurately determine the site of high fields that lead to neuronal stimulation and highlight the necessity for realistic head modeling for TMS applications.

36 MATERIALS SCIENCE↗

Synthesis and magnetic properties of single phase titanomagnetites

The focus of this paper is the study of cation distributions and resulting magnetizations in titanomagnetites (TMs), (1−x)Fe{sub 3}O{sub 4−x}Fe{sub 2}TiO{sub 4} solid solutions. TM remnant states are hypothesized to contribute to planetary magnetic field anomalies. This work correlates experimental data with proposed models for the TM pseudobinary. Improved synthesis procedures are reported for single phase Ulvöspinel (Fe{sub 2}TiO{sub 4}), and TM solid solutions were made using solid state synthesis techniques. X-ray diffraction and scanning electron microscopy show samples to be single phase solid solutions. M-H curves of TM75, 80, 85, 90, and 95 (TMX where X = at. % of ulvöspinel) were measured using a Physical Property Measurement System at 10 K, in fields of 0 to 8 T. The saturation magnetization was found to be close to that predicted by the Neel model for cation distribution in TMs. M-T curves of the remnant magnetization were measured from 10 K to 350 K. The remnant magnetization was acquired at 10 K by applying an 8 T field and then releasing the field. Experimental Neel temperatures are reported for samples in the Neel model ground state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗