Search NASA⌕ Search

SEARCH · Search NASA

Results for “TOPOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Dynamic topography and gravity anomalies for fluid layers whose viscosity varies exponentially with depth

Adopting the formalism of Parsons and Daly (1983), analytical integral equations (Green's function integrals) are derived which relate gravity anomalies and dynamic boundary topography with temperature as a function of wavenumber for a fluid layer whose viscosity varies exponentially with depth. In the earth, such a viscosity profile may be found in the asthenosphere, where the large thermal gradient leads to exponential decrease of viscosity with depth, the effects of a pressure increase being small in comparison. It is shown that, when viscosity varies rapidly, topography kernels for both the surface and bottom boundaries (and hence the gravity kernel) are strongly affected at all wavelengths.

Revenaugh, Justin↗

Sound propagation over uneven ground and irregular topography

The goal of this research is to develop theoretical, computational, and experimental techniques for predicting the effects of irregular topography on long range sound propagation in the atmosphere. Irregular topography is understood to imply a ground surface that is not idealizable as being perfectly flat or that is no idealizable as having a constant specific acoustic impedance. The focus is on circumstances where the propagation is similar to what might be expected for noise from low-altitude air vehicles flying over suburban or rural terrain, such that rays from the source arrive at angles close to grazing incidence.

Berthelot, Yves H.↗

Sound propagation over uneven ground and irregular topography

Theoretical, computational, and experimental techniques were developed for predicting the effects of irregular topography on long range sound propagation in the atmosphere. Irregular topography is understood to imply a ground surface that: (1) is not idealizable as being perfectly flat, or (2) that is not idealizable as having a constant specific acoustic impedance. The focus is on circumstances where the propagation is similar to what might be expected for noise from low altitude air vehicles flying over suburban or rural terrain, such that rays from the source arrive at angles close to grazing incidence.

Berthelot, Yves H.↗

On the simultaneous improvement of a satellite orbit and determination of sea surface topography using altimeter data

A method is presented in satellite altimetry that attempts to simultaneously determine the geoid and sea surface toography with minimum wavelengths of about 500 km and to reduce the radial orbit errors caused by geopotential uncertainties. The modeling of these errors is made using the linearized Lagrangian perturbation theory. Observation equations are developed using sea surface heights and crossover discrepancies as observables. A minimum variance solution with prior information can then provide estimates of parametrs representing the sea surface topography and corrections to the orbit. The potential of the method is demonstrated in a solution where simulated geopotential errors and the Levitus sea surface topography are used to generate the observables for a Seasat 3 day arc. The simulation results suggest that the method can be used to efficiently process real altimeter data.

Engelis, Theodossios↗

Buried topography of Utopia, Mars - Persistence of a giant impact depression

Knobs, partially buried craters, ring fractures, and some mesas permit a qualitative determination of the topography buried beneath younger northern plains materials. These features are widely distributed in the Utopia area but are absent in a large, roughly circular region centered at about 48 deg N, 240 deg W. This implies the existence of a circular depression about 3300 km in diameter buried beneath Utopia Planitia that is interpreted to represent the central part of a very large impact basin. The presence of buried curved massifs around part of this depression, and a roughly coincident mascon, lend further support. Present topography, areal geology, and paleotopography of buried surfaces all point to the persistence of this major depression for almost the entire history of Mars.

Mcgill, George E.↗

Geoid height versus topography for oceanic plateaus and swells

Gridded geoid height data (Marsh et al.l, 1986) and gridded bathymetry data (Van Wykhouse, 1973) are used to estimate the average compensation depths of 53 oceanic swells and plateaus. The relationship between geoid height and topography is examined using Airy and thermal compensation models. It is shown that geoid height is linearly related to topography between wavelengths of 400 and 4000 m as predicted by isostatic compensation models. The geoid/topography ratio is dependent on the average depth of compensation. The intermediate geoid/topography ratios of most thermal swells are interpreted as a linear combination of the decaying thermal swell signature and that of the persisting Airy-compensated volcanic edifice.

Sandwell, David T.↗

The decay of the spectrum of the gravitational potential and the topography for the earth

The spectrum of the earth's gravitational potential and topography, as represented by spherical harmonic expansions to degree 180, have been computed. Modeling the decay in the form of (A x l) exp-Beta, values of A and Beta for several degree (l) ranges were computed. For degree range 5-180, Beta was 2.54 for the potential and 2.16 for equivalent rock topography. The potential decay was somewhat slower than that implied by Kaula's rule. However, at high degree ranges, the Beta values were larger agreeing better with recent determinations from terrestrial gravity data and geoid undulations implied by satellite altimetric data. The values imply that the potential decays faster at higher l values.

Rapp, R. H.↗

Wide swath ocean topography mapping with interferometric altimeters

An interferometric radar altimeter is proposed to provide wide-swath high-resolution ocean topography. Several system design issues of such an interferometric altimeter are presented. Tradeoffs between processing of the interferometric signal using the so-called amplitude approach and the so-called phase approach are shown. The systematic errors associated with uncertainties in the interferometer baseline and the attitude of interferometer orientation are also discussed. Described is an approach using the measurements at orbit cross-over regions, together with the topography measurements from a traditional nadir-looking altimeter that are not contaminated by the baseline and attitude noises. Preliminary simulation results show that such an approach can generate an acceptable error level if the ocean surface does not change appreciably between the observations.

Rodriguez, E.↗

The effects of large-scale topography on the circulation in low-order models

This paper investigates the effect of topography on circulation produced by low-order quasi-geostrophic models that are capable of reproducing many basic features of midlatitude general circulation in the absence of topography. Using a simple two-level spectral model, time-mean stationary waves and low-frequency phenomena were examined for three different topographic configurations, of which two consisted of a sinusoidal mountain-valley structure, and the third was the Fourier representation of an isolated mountain peak. In the experiment with an isolated mountain, it was found that the time-mean wave in the model was highly dependent on the operation of wave-wave interactions, which had a significant impact on stationary waves through modifications in the mean zonal flow.

O'Brien, Enda↗

The Ohio State 1991 geopotential and sea surface topography harmonic coefficient models

The computation is described of a geopotential model to deg 360, a sea surface topography model to deg 10/15, and adjusted Geosat orbits for the first year of the exact repeat mission (ERM). This study started from the GEM-T2 potential coefficient model and it's error covariance matrix and Geosat orbits (for 22 ERMs) computed by Haines et al. using the GEM-T2 model. The first step followed the general procedures which use a radial orbit error theory originally developed by English. The Geosat data was processed to find corrections to the a priori geopotential model, corrections to a radial orbit error model for 76 Geosat arcs, and coefficients of a harmonic representation of the sea surface topography. The second stage of the analysis took place by doing a combination of the GEM-T2 coefficients with 30 deg gravity data derived from surface gravity data and anomalies obtained from altimeter data. The analysis has shown how a high degree spherical harmonic model can be determined combining the best aspects of two different analysis techniques. The error analysis was described that has led to the accuracy estimates for all the coefficients to deg 360. Significant work is needed to improve the modeling effort.

Rapp, Richard H.↗

Flight dynamics facility operational orbit determination support for the ocean topography experiment

The Ocean Topography Experiment (TOPEX/POSEIDON) mission is designed to determine the topography of the Earth's sea surface across a 3 yr period, beginning with launch in June 1992. The Goddard Space Flight Center Dynamics Facility has the capability to operationally receive and process Tracking and Data Relay Satellite System (TDRSS) tracking data. Because these data will be used to support orbit determination (OD) aspects of the TOPEX mission, the Dynamics Facility was designated to perform TOPEX operational OD. The scientific data require stringent OD accuracy in navigating the TOPEX spacecraft. The OD accuracy requirements fall into two categories: (1) on orbit free flight; and (2) maneuver. The maneuver OD accuracy requirements are of two types; premaneuver planning and postmaneuver evaluation. Analysis using the Orbit Determination Error Analysis System (ODEAS) covariance software has shown that, during the first postlaunch mission phase of the TOPEX mission, some postmaneuver evaluation OD accuracy requirements cannot be met. ODEAS results also show that the most difficult requirements to meet are those that determine the change in the components of velocity for postmaneuver evaluation.

Bolvin, D. T.↗

Venusian highlands - Geoid to topography ratios and their implications

Geoid-to-topography ratios (GTRs) are estimated for 12 Venusian highland features to allow comparison with convection calculations and with terrestrial data of oceanic hot spots, swells, and plateaus. The geoid is estimated in the wavenumber domain from the isostatic formula, using the topography and the apparent depths isostatic compensation (ADC) for each region. In the space domain, the GTR is equal to the least squares slope of the linear fit of the geoid to the topograpy. The resulting GTR range is 7-31 m/km, which is much higher than terrestrial oceanic values (-1 to 5 m/km). The features fall into two distinct groups, one with a GTR range of 7-13 m/km, and one with a range of 19-25 m/km. A model for thermal thinning of a 100-km-thick lithosphere fits all values in the lower GTR group to within one standard deviation.

Smrekar, Suzanne E.↗

Fractal analysis of Venus topography in Tinatin Planitia and Ovda Regio

A one-dimensional fractal analysis is applied to Magellan altimetry data for two 20 x 20 deg equatorial regions on Venus. For the Ovda Regio, highlands the power spectra of the altimetry data correlate well with power law (fractal) statistics over the full range of wavelengths considered 36-703 km; the mean fractal dimension is D(Ovda) = 1.64. For the Tinatin Planitia lowlands, the power spectra consistently show a rollover at long wavelengths, (greater than 200 km), the long-wavelength topography in this region either never developed or has subsequently relaxed. The mean of the best fit fractal dimension for Tinatin is D(Tinatin) = 1.41. The measure of roughness (RA) correlates well with variations in relief, especially at short wavelengths (about 50 km). The quantitative analysis of Venus topography can be applied on a global scale. The one-dimensional method can be extended to two-dimensional space, yielding two-dimensional maps of regional D and RA, allowing a more complete use of regional two-dimensional altimetry data.

Kucinskas, Algis B.↗

Geoid, topography, and convection-driven crustal deformation on Venus

High-resolution Magellan images and altimetry of Venus reveal a wide range of styles and scales of surface deformation that cannot readily be explained within the classical terrestrial plate tectonic paradigm. The high correlation of long-wavelength topography and gravity and the large apparent depths of compensation suggest that Venus lacks an upper-mantle low-viscosity zone. A key difference between Earth and Venus may be the degree of coupling between the convecting mantle and the overlying lithosphere. Mantle flow should then have recognizable signatures in the relationships between surface topography, crustal deformation, and the observed gravity field.

Simons, Mark↗

Orbit determination support of the Ocean Topography Experiment (TOPEX)/Poseidon operational orbit

The Ocean Topography Experiment (TOPEX/Poseidon) mission is designed to determine the topography of the Earth's sea surface over a 3-year period, beginning shortly after launch in July 1992. TOPEX/Poseidon is a joint venture between the United States National Aeronautics and Space Administration (NASA) and the French Centre Nationale d'Etudes Spatiales. The Jet Propulsion Laboratory is NASA's TOPEX/Poseidon project center. The Tracking and Data Relay Satellite System (TDRSS) will nominally be used to support the day-to-day orbit determination aspects of the mission. Due to its extensive experience with TDRSS tracking data, the NASA Goddard Space Flight Center (GSFC) Flight Dynamics Facility (FDF) will receive and process TDRSS observational data. To fulfill the scientific goals of the mission, it is necessary to achieve and maintain a very precise orbit. The most stringent accuracy requirements are associated with planning and evaluating orbit maneuvers, which will place the spacecraft in its mission orbit and maintain the required ground track. To determine if the FDF can meet the TOPEX/Poseidon maneuver accuracy requirements, covariance analysis was undertaken with the Orbit Determination Error Analysis System (ODEAS). The covariance analysis addressed many aspects of TOPEX/Poseidon orbit determination, including arc length, force models, and other processing options. The most recent analysis has focused on determining the size of the geopotential field necessary to meet the maneuver support requirements. Analysis was undertaken with the full 50 x 50 Goddard Earth Model (GEM) T3 field as well as smaller representations of this model.

Schanzle, A. F.↗

The effect of topography on radar scattering from vegetated areas

It is shown how radar scattering from vegetated areas is affected by the topography of the surface underneath the vegetation, and that by the use of a discrete scatterer model the dominant scattering mechanism may change drastically when the ground surface is tilted relative to the horizontal. In the case of a horizontal ground surface total scattering may be dominated by scattering off the tree trunks, followed by a reflection off the ground surface. It is shown that for a relatively small tilt in the ground surface the ground-trunk interaction term may be replaced by scattering from the branches alone as the dominant scattering mechanism. The effect of the topography is more pronounced for scattering by longer wavelengths. The implications for algorithms designed to infer forest woody biomass and soil and vegetation moisture using polarimetric synthetic aperture radar (SAR) data are discussed.

Van Zyl, Jakob J.↗

Geoid, topography, and convection-driven crustal deformation on Venus

High-resolution Magellan images and altimetry of Venus reveal a wide range of styles and scales of surface deformation that cannot readily be explained within the classical terrestrial plate tectonic paradigm. The high correlation of long-wavelength topography and gravity and the large apparent depths of compensation suggest that Venus lacks an upper-mantle low-viscosity zone. A key difference between Earth and Venus may be the degree of coupling between the convecting mantle and the overlying lithosphere. Mantle flow should then have recognizable signatures in the relationships between the observed surface topography, crustal deformation, and the gravity field. Therefore, comparison of model results with observational data can help to constrain such parameters as crustal and thermal boundary layer thicknesses as well as the character of mantle flow below different Venusian features. We explore in this paper the effects of this coupling by means of a finite element modelling technique.

Simons, Mark↗

Response of the topography and gravity field on Venus to mantle upwelling beneath a chemical boundary layer

The long wavelength correlation of the gravity and topography and the large apparent depths of compensation (approximately 150-300 km) for large highland regions on Venus require significant differences between the interior structure of Earth and Venus. The morphology, geologic history, and large apparent depths of compensation for many highlands have been interpreted to indicate areas of mantle upwelling. A large apparent depth of compensation at a mantle upwelling is generally interpreted to indicate the base of the thermal boundary layer of convection. A boundary layer thickness of 150-300 km implies that the interior of Venus is presently much colder than Earth and thus tectonically less active. The recent Magellan mission has provided contradictory evidence regarding the present level of tectonic activity on Venus, prompting considerable debate. In this study, we investigate the possibility that a chemical boundary layer acts together with a thermal boundary layer to produce large apparent depths of compensation, or equivalently, large geoid-to-topography-ratios (GTR's). The crust of a planet forms through partial melting of mantle materials. Both the melt and the residuum are lower in density than unmelted (or undepleted) mantle. In the absence of vigorous plate tectonics, a thick layer of buoyant residuum, or depleted mantle, may collect beneath the lithosphere. In this scenario, the thermal lithosphere does not need to be thick and cold to match the GTR's. Cooling of the depleted layer may lead to overturn of the upper mantle and episodic resurfacing with time scales on the order of 300-500 MY, consistent with the resurfacing age of Venus.

Smrekar, Suzanne E.↗