SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High temperature effects on evolution of Venus upper lithosphere, considering magnetic differentiation, isostatic adjustments, surface relief, mountain building time and distance scales, etc
A two-dimensional numerical model was used to investigate the formation of marine advection fog. The model predicts the evolution of potential temperature, horizontal wind, water vapor content, and liquid water content in a vertical cross section of the atmosphere as determined by vertical turbulent transfer and horizontal advection, as well as radiative cooling and drop sedimentation. The model is designed to simulate the formation, development, or dissipation of advection fog in response to transfer of heat and moisture between the atmosphere and the surface as driven by advection over horizontal discontinuities in the surface temperature. Results from numerical simulations of advection fog formation are discussed with reference to observations of marine fog. A survey of candidate fog or cloud microphysics experiments which might be performed in the low gravity environment of a shuttle-type spacecraft in presented. Recommendations are given for relatively simple experiments which are relevent to fog modification problems.
Empirical data related to questions regarding the origin of comets are examined, taking into account the primitive temperature and its evolution, the cometary C-12/C-13 isotope ratio, the chemistry of comets, and the solar-system related orbits of the comets. The theories of cometary origin considered are related to a condensation of comets from the solar nebula and a later ejection into Oort's cloud, a recent condensation of comets in situ, a capture of interstellar comets, and a reversal of the arrow of time in the traditional evolution of comets. The only hypothesis which seems to survive an evaluation of the theories on the basis of the existing data is that the comets were condensed some five billion years ago in the vicinity of the giant planets or beyond, at the outer edge of the solar nebula.
X-ray and extreme ultraviolet observations of a compact flare were analyzed to determine the relative importance of radiation, thermal conduction, and 'evaporation' in the evolution of the temperature and density structure of the plasma. In the event studied (1973 August 9), the electron density was relatively high (5 x 10 to the eleventh to 1 x 10 to the twelfth) and radiation was evidently an important energy-loss and cooling mechanism. The light curves of ultraviolet lines formed at temperatures between 10 to the fifth to 10 to the seventh K indicate a time-varying emission measure gradient, and hence temperature gradient, during the flare. Radiative instability evidently played an important role in determining the steepness of these gradients during the rise and fall phases, and caused strong downward motions of material during the cooling phase. Toward the end of the event, the coronal electron density decreased and the temperature gradient relaxed toward that expected from a conduction-dominated plasma. For this flare, evaporative cooling did not appear to be a significant factor.
High spatial (about 1 arcsec) and temporal (20 sec) resolution UV solar spectroscopy has been carried out by the Naval Research Laboratory from sounding rockets since 1975. The High Resolution Telescope and Spectrograph payload, consisting of a 300 mm diameter x 4500 mm focal length Cassegrain telescope and the tandem Woodsworth spectrograph, was used to make the observations. Using this instrument, a multitude of highly energetic phenomena can be observed in the chromosphere, transition zone, and corona. High-resolution photographs of the UV continuum at 1600 A, used to study the fine structure and evolution of the temperature minimum layer, show that because of its strong spatial and temporal intensity fluctuations, the 1600 A continuum emission comes from not only the temperature minimum, but a variety of temperature regimes. Similar spatial and temporal behavior is seen in lower chromospheric lines of Si I. Typical line profiles of the C IV 1550 A line illustrate the fine structure and dynamics of the transition zone; the mass and energy flux balance in this zone is also determined.
Drop interactions, changes in drop temperature, and the evolution of the ambient conditions due to heating and evaporation were taken into account in a theory of drop evaporation. A sphere of influence is defined for each drop, with all droplets having equal separation distances. Global conservation and state equations for a droplet spray are formulated, together with equations for single drop evaporation in finite surroundings. A criterion is defined for complete evaporation and the dynamics of spray evaporation are discussed. The theory is noted to be applicable for both dilute and nondilute spray evaporation effects.
A well-resolved two-dimensional nonlinear numerical simulation of the radiative/thermal instability in a sheared magnetic field is described which leads to filament formation. The condensation is initiated by a linearly unstable mode and widens until it is slowed by thermal conduction parallel to B. During the nonlinear evolution, the minimum temperature falls from 10 to the 6th K to 10 to the 4th K and eventually reaches a state of local thermal equilibrium in about five e-folding times.
Theoretical models of lunar origin involving one or more collisions between the earth and other large sun-orbiting bodies are examined in a critical review. Ten basic propositions of the collision hypothesis (CH) are listed; observational data on mass and angular momentum, bulk chemistry, volatile depletion, trace elements, primordial high temperatures, and orbital evolution are summarized; and the basic tenets of alternative models (fission, capture, and coformation) are reviewed. Consideration is given to the thermodynamics of large impacts, rheological and dynamical problems, numerical simulations based on the CH, disk evolution models, and the chemical implications of the CH. It is concluded that the sound arguments and evidence supporting the CH are not (yet) sufficient to rule out other hypotheses.
The temporal characteristics of the polar wind have been studied using a simplified set of collisionless equations and a full set of hydrodynamic equations which contained continuity, momentum, and energy equations for H(+), O(+), and electrons, including collisional conductivities and variable isotropic, ion and electron temperatures. The temporal evolution of the polar wind was modeled for initial, extended density depletions of factors of 3, 10, and 100 starting at several altitudes for each model. Comparison of the results from the two models showed the same temporal characteristics for the polar wind densities, flow velocities, and escape fluxes. The characteristics of plasma expansion are presented. It is found that the propagation velocities of the disturbance vary with the level of the depletion.
SOILSIM, a digital model of energy and moisture fluxes in the soil and above the soil surface, is presented. It simulates the time evolution of soil temperature and moisture, temperature of the soil surface and plant canopy the above surface, and the fluxes of sensible and latent heat into the atmosphere in response to surface weather conditions. The model is driven by simple weather observations including wind speed, air temperature, air humidity, and incident radiation. The model intended to be useful in conjunction with remotely sensed information of the land surface state, such as surface brightness temperature and soil moisture, for computing wide area evapotranspiration.
To create a comparative framework for the study of ancient examples, we have been carrying out parallel studies of the microbial biosedimentology, taphonomy and geochemistry of modem and sub-Recent thermal spring deposits. One goal of the research is the development of integrated litho- and taphofacies models for siliceous and travertline sinters. Thermal springs are regarded as important environments for the origin and early evolution of life on Earth, and we seek to utilize information from the fossil record to reconstruct the evolution of high temperature ecosystems. Microbial contributions to the fabric of thermal spring sinters occur when population growth rates keep pace with, or exceed rates of inorganic precipitation, allowing for the development of continuous biofilms or mats. In siliceous thermal springs, microorganisms are typically entombed while viable. Modes of preservation reflect the balance between rates of organic matter degradation, silica precipitation and secondary infilling. Subaerial sinters are initially quite porous and permeable and at temperatures higher than about 20 C, organic materials are usually degraded prior to secondary infilling of sinter frameworks. Thus, organically-preserved microfossils are rare and fossil information consists of characteristic biofabrics formed by the encrustation and underplating of microbial mat surfaces. This probably accounts for the typically low total organic carbon values observed in thermal spring deposits. In mid-temperature, (approx. 35 - 59 C) ponds and outflows, the surface morphology of tufted Phormidium mats is preserved through mat underplating by thin siliceous: crusts. Microbial taxes lead to clumping of ceils and/or preferred filament orientations that together define higher order composite fabrics in thermal spring stromatolites (e.g. network, coniform, and palisade). At lower temperatures (less than 35 C), Calothrix mats cover shallow terracette pools forming flat carpets or pustular surfaces that produce palisade and "shrub" fabrics, respectively. At finer scales, composite fabrics are seen to consist distinctive associations of microstructures formed by the encrustation of individual cells and filaments. Composite fabrics survive the diagenetic transitions from primary opaline silica to quartz and are known from subaerial thermal spring deposits as old as Lower Carboniferous. However, fossil microorganisms tend to be rare in older deposits, and are usually preserved only where cells or sheaths have been stained by iron oxides. In subaqueous mineralizing springs at lower temperatures, early infilling leads to a more rapid and complete reduction in porosity and permeability. This process, along with the slower rates of microbial degradation at lower temperatures, creates a more favorable situation for organic matter preservation. Application of this taphonomic model to the Rhynie Chert, previously interpreted as subaerial, suggest it was probably deposited in a subaqueous spring setting at lower temperatures.
The ability to process high performance polymers into quality, void-free composites has been significantly advanced using oligomers terminated with reactive groups which cure or crosslink at elevated temperature without the evolution of volatile byproducts. Several matrix resin systems of considerable interest to the aerospace community utilize phenylethynyl-terminated imide (PETI) technology to achieve this advantage. The present paper addresses the cure chemistry of PETI oligomers. The thermal cure of a low molecular weight model compound was studied using a variety of analytical techniques including differential scanning calorimetry, Fourier transform infrared spectroscopy, and liquid chromatography-mass spectroscopy. The studies indicate an extremely complex cure process. Many stable products were isolated and this paper reports current work on identification of those products. The intent of this research is to provide fundamental insight into the molecular structure of the cured PETI engineering materials so that performance and durability can be more fully assessed.
The solar wind appears to be a fully developed turbulent magnetofluid. As this magnetofluid expands into the heliosphere, it cools significantly less rapidly than would be expected of an adiabatically expanding gas. The evolution of the temperature with distance is roughly what would be expected if the turbulence dissipated by heating the thermal plasma. Several physical mechanisms have been proposed, including resonance absorption of waves and Landau damping. Recently, high-time resolution magnetic field data from the four Cluster spacecraft have illustrated damping of the fluctuations out to the electron inertial scale. Use of the wave telescope/k-filtering technique during two intervals of busrt mode data suggests that dissipation of the fluctuations is due to Landau damping, first on protons, then on electrons.
The first solid samples analysed by the Chemistry and Mineralogy (CheMin) instrument and Sample Analysis at Mars (SAM) instrument suite on the Mars Science Laboratory (MSL) consisted of < 150 m fines sieved from aeolian bedform material at a site named Rocknest. All four samples of this material analyzed by SAM s evolved gas analysis mass spectrometry (EGA-MS) released H2O, CO2, O2, and SO2 (Fig. 1), as well as H2S and possibly NO. This is the first time evolved SO2 (and evolved H2S) has been detected from thermal analysis of martian materials. The identity of these evolved gases and temperature (T) of evolution can support mineral detection by CheMin and place constraints on trace volatile-bearing phases present below the CheMin detection limit or difficult to characterize with XRD (e.g., X-ray amorphous phases). Constraints on phases responsible for evolved CO2 and O2 are detailed elsewhere [1,2,3]. Here, we focus on potential constraints on phases that evolved SO2, H2S, and H2O during thermal analysis.
The Sample Analysis at Mars (SAM) and Chemistry and Mineralogy (CheMin) instruments on the Mars Science Laboratory (MSL) analysed several subsamples of sample fines (<150 μm) from three sites in Yellowknife Bay, an aeolian bedform termed Rocknest (hereafter "RN") and two samples drilled from the Sheepbed mudstone at sites named John Klein ("JK") and Cumberland ("CB"). SAM's evolved gas analysis (EGA) mass spectrometry detected H2O, CO2, O2, H2, SO2, H2S, HCl, NO, OCS, CS2 and other trace gases. The identity of evolved gases and temperature (T) of evolution can support mineral detection by CheMin and place constraints on trace volatile-bearing phases present below the CheMin detection limit or difficult to characterize with XRD (e.g., X-ray amorphous phases). Here, we focus on potential constraints on phases that evolved SO2, H2S, OCS, and CS2 during thermal analysis.
While in Yellowknife Bay, the Mars Science Laboratory Curiosity rover collected two drilled samples, John Klein (hereafter "JK") and Cumberland ("CB"), from the Sheepbed mudstone, as well as a scooped sample from the Rocknest aeolian bedform ("RN"). These samples were sieved by Curiosity's sample processing system and then several subsamples of these materials were delivered to the Sample Analysis at Mars (SAM) instrument suite and the CheMin X-ray diffraction/X-ray fluorescence instrument. CheMin provided the first in situ X-ray diffraction-based evidence of clay minerals on Mars, which are likely trioctahedral smectites (e.g., Fe-saponite) and comprise ~20 wt% of the mudstone samples [1]. SAM's evolved gas analysis (EGA) mass spectrometry analyses of JK and CB subsamples, as well as RN subsamples, detected H2O, CO2, O2, H2, SO2, H2S, HCl, NO, OCS, CS2 and other trace gases evolved during pyrolysis. The identity of evolved gases and temperature( s) of evolution can augment mineral detection by CheMin and place constraints on trace volatile-bearing phases present below the CheMin detection limit or those phases difficult to characterize with XRD (e.g., X-ray amorphous phases). Here we will focus on the SAM H2O data, in the context of CheMin analyses, and comparisons to laboratory SAM-like analyses of several phyllosilicate minerals including smectites.
Understanding the inventory of carbon on Mars is relevant to the question of whether Mars was ever habitable. While the Mars atmosphere represents a large reservoir of carbon, in situ pyrolysis performed on Mars and meteorite analyses indicate that another significant reservoir of carbon is the rocks themselves. Complex organic carbon was discovered in 3.5 Ga mudstones sampled at Cumberland (CB) in the Yellowknife Bay Formation in Gale Crater by the Sample Analysis at Mars (SAM) instrument suite on the Mars Science Laboratory (MSL) using a thermal decomposition technique called evolved gas analysis (EGA). Other simple organics have also been detected in these same CB materials. Low temperature co-evolution of CO and CO2 (~200°C – 500°C) has been detected in many samples from Gale Crater where SAM EGA has been performed, and potential sources include combustion of terrestrial organics from SAM, as well as combustion and/or decarboxylation of either indigenous martian or exogenous organic carbon.
This study examines and compares the effect of different heat treatments (HT) on the microstructure and mechanical properties of Monel K500 fabricated using laser powder bed fusion (L-PBF) and laser powder directed energy deposition (LP-DED) technologies. The as-fabricated Monel K500 specimens exhibited dendritic microstructure and elemental micro-segregation due to high cooling rates induced during the fabrication process. The applicability of HT proposed in the literature for wrought Monel K500 was investigated for L-PBF and LP-DED using four different HT procedures involving hot isostatic pressing (HIP), solution annealing (SA), and aging. The mechanical properties of test specimens were evaluated using uniaxial tensile testing at room temperature. The microstructural evolution of test specimens during HT was analyzed using a scanning electron microscope. For all HT conditions investigated, L-PBF Monel K500 specimens consistently displayed higher strength and lower ductility compared to the LP-DED counterparts. The HT procedure involving HIP at 1160°C for 3hr at 100 MPa, SA at 1100°C for 15 min, and three step aging at 610°C for 16 hr, 540°C for 6 hr, and 480°C for 8 hr resulted in highest strength for both L-PBF and LP-DED fabricated Monel K500.