Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Cr, N-Codoped TiO2 Mesoporous Microspheres for Li-ion Rechargeable Batteries with Enhanced Electrochemical Performance

Cr,N-codoped TiO2 mesoporous microspheres synthesized using hydrothermal and subsequent nitridation treatment, exhibited higher solubility of nitrogen, and improved electrical conductivity than N-doped TiO2, as anode for Lithium-ion rechargeable batteries, which led to improving charge-discharge capacity at 0.1 C and twice higher rate capability compared to that of nitrogen-doped TiO2 mesoporous microsphere at 10 C

Bi, Zhonghe↗

Reactivity Screening of Anatase TiO2 Nanotube Arrays and Anatase Thin Films: A Surface Chemistry Point of View

As a reactivity screening we collected thermal desorption spectroscopy (TDS) data of iso-butane, O2, CO2, and CO adsorbed on ordered TiO2 nanotube (TiNTs) arrays. As a reference system iso-butane adsorption on an anatase TiO2 thin film has been considered as well. The as-grown TiNTs are vertically aligned and amorphous. Polycrystalline (poly.) anatase or poly. anatase/rutile mixed nanotubes are formed by annealing confirmed by x-ray diffraction (XRD) and scanning electron microscopy (SEM). The anatase thin film was grown on SrTiO3(001) and characterized by XRD and atomic force microscopy (AFM). Surprisingly, oxygen distinctly interacts with the TiNTs whereas this process is not observed on fully oxidized single crystal rutile TiO2(110). Desorption temperatures of 110-150 K and 100-120 K were observed for CO2 and CO, respectively, on the TiNTs. Variations in the binding energies of the alkanes on TiNTs and anatase thin films also were present, i.e., a structure-activity relationship (SAR) is evident.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anticorrelation between Surface and Subsurface Point Defects and the Impact on the Redox Chemistry of TiO2(110)

Using combination of STM, DFT and SIMS, we explored the interplay and relative impact of surface vs. subsurface defects on the surface chemistry of rutile TiO2. STM results show that surface O vacancies (VO’s) are virtually absent in the vicinity of positively-charged subsurface point-defects. This observation is consistent with DFT calculations of impact of subsurface defect proximity on VO formation energy. To monitor the influence of such lateral anticorrelation on surface redox chemistry, a test reaction of the dissociative adsorption of O2 is employed, which is observed to be suppressed around them. DFT results attribute this to a perceived absence of the intrinsic (Ti) (and likely extrinsic) interstitials in the nearest subsurface layer beneath “inhibited” areas. We also postulate that the entire nearest subsurface region could be voided of any charged point-defects, whereas prevalent VO’s are largely responsible for mediation of the redox chemistry at reduced TiO2(110) surface.

Environmental Molecular Sciences Laboratory↗

Temporal Evolution of the Electron Diffusion Coefficient in Electrolyte-Filled Mesoporous Nanocrystalline TiO2 Films

Electron transport in electrolyte-filled mesoporous TiO2-based solar cells is described quantitatively from the perspective of the continuous-time random walk model. An analytical expression is derived for the time-dependent diffusion coefficient of electrons, which transforms at a characteristic (Fermi) time from strongly time-dependent values (dispersive transport) at short times to relatively time-independent values (nondispersive transport) at long times. At short times, the diffusion coefficient displays a power-law behavior with time. The timescale for the diffusion coefficient to reach its steady-state value is substantially longer than the Fermi time. The Fermi time and the steepness of the distribution of waiting times associated with trap sites have a strong influence on both the steady-state diffusion coefficient of electrons and on the dispersiveness of electron transport. At short timescales, ionic drag, associated with the ambipolar effect, slows electron transport through the TiO2 matrix, whereas at steady state, transport is trap limited. Decreasing the electron density lowers the steady-state limit of the diffusion coefficient and increases the timescale over which transport is dispersive.

ambipolar diffusion↗

In-situ imaging of the nucleation and growth of epitaxial anatase TiO2(001) films on SrTiO3(001)

The growth of TiO2 anatase films on Nb doped SrTiO3(001) by oxygen-assisted molecular beam epitaxy has been studied in-situ by scanning tunneling microscopy. We show that the initial growth follows the Stranski-Krastanov mode, where islands form on top of a wetting layer consisting of two monolayers (ML) of TiO2. The epitaxial islands subsequently nucleate and coalescence into large commonly-oriented crystallites. The (4x4) reconstruction observed by reflection high-energy electron diffraction (RHEED) is shown to result from the coexistence of individual (4x1) and (1x4) reconstructions present on different crystallite surfaces. The anatase grows in units of bilayers, resulting in a step height of 2 ML (~0.5 nm). This result explains the fact that the measured period of the RHEED specular-beam intensity oscillations corresponds to the time required for deposition of 2 ML. Ar ion sputtering and UHV annealing results in a transformation to coexisting (4x1) and (1x4) reconstructed terraces on individual crystallites, as commonly observed by ex-situ STM studies.

36 MATERIALS SCIENCE↗

Quenching of electron transfer reactions through coadsorption: A study of oxygen photodesorption from TiO2(110)

Using temperature programmed desorption (TPD) and photon stimulated desorption (PSD), we show that coadsorbates of varying binding energies on the rutile TiO2(110) surface exert a commensurate inhibiting influence on the hole-mediated photodesorption of adsorbed O2. A variety of coadsorbates (Ar, Kr, Xe, N2, CO, CO2, CH4, N2O, acetone, methanol or water) were shown to quench O2 photoactivity, with the extent correlating with the coadsorbate’s gas phase basicity, which in turn determines the strength of the coadsorbate-Ti4+ bond. Coadsorbed rare gases inhibited the photodesorption of O2 by ~10-25%, whereas strongly bound species (water, methanol and acetone) nearly completely inhibited O2 PSD. We suggest that coadsorption of these molecules inhibit the arrival probability of holes to the surface. Band bending effects, which vary with the extent of charge transfer between the coadsorbate and the TiO2(110) surface, are not expected to be significant in the cases of the rare gases and physisorbed species. These results indicate that neutral coadsorbates can exert a significant influence on charge transfer events by altering the interfacial dipole in the vicinity of the target molecule. This work was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. The work was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle under Contract DE-AC05-76RL01830.

Environmental Molecular Sciences Laboratory↗

Origin of Coverage Dependence in Photoreactivity of Carboxylate on TiO2(110): Hindering by Charged Coadsorbed Hydroxyls

The influence of reactant coverage on photochemical activity was explored using scanning tunneling microscopy (STM) and ultraviolet photoelectron spectroscopy (UPS). We observed diminished reactivity of carboxylate species (trimethyl acetate, TMA) on TiO2(110) as a function of increasing coverage. This effect was not linked to intermolecular interactions of TMA but to the accumulation of the coadsorbed bridging hydroxyls (HOb) deposited during (thermal) dissociative adsorption of the parent, trimethylacetic acid (TMAA). Confirmation of the hindering influence of HOb groups was obtained by the observation that HOb species originated from H2O dissociation at O-vacancy sites have a similar hindering effect on TMA photochemistry. Though HOb’s are photoinactive on TiO2(110) under ultrahigh vacuum conditions, UPS results show that these sites trap photoexcited electrons, which in turn likely (electrostatically) attract and neutralize photoexcited holes, thus suppressing the hole-mediated photoreactivity of TMA. This negative influence of surface hydroxyls on hole-mediated photochemistry is likely a major factor in other anaerobic photochemical processes on reducible oxide surfaces.

Environmental Molecular Sciences Laboratory↗

Modeling Excited States in TiO2 Nanoparticles: On the Accuracy of a TD-DFT Based Description

We have investigated the suitability of Time-Dependent Density Functional Theory (TD-DFT) to describe vertical low-energy excitations in naked and hydrated titanium dioxide nanoparticles through a comparison with results from Equation-of-Motion Coupled Cluster (EOM-CC) quantum chemistry methods. We demonstrate that for most TiO2 nanoparticles TD-DFT calculations with commonly used exchange-correlation (XC-)potentials (e.g. B3LYP) and EOM-CC methods give qualitatively similar results. Importantly, however, we also show that for an important subset of structures, TD-DFT gives qualitatively different results depending upon the XC-potential used and that in this case only TD-CAM-B3LYP and TD-BHLYP calculations yield results that are consistent with those obtained using EOM-CC theory. Moreover, we demonstrate that the discrepancies for such structures arise from a particular combination of defects, excitations involving which are charge-transfer excitations and hence are poorly described by XC-potentials that contain no or low fractions of Hartree-Fock like exchange. Finally, we discuss that such defects are readily healed in the presence of ubiquitously present water and that as a result the description of vertical low-energy excitations for hydrated TiO2 nanoparticles is hence non-problematic.

calculations↗

Transient Mobility of Oxygen Adatoms upon O2 Dissociation on Reduced TiO2 (110)

Tracking the same region of the reduced TiO2 (110) surface by scanning tunneling microscopy before and after oxygen exposure at room temperature confirms that O2 molecules dissociate only at the bridging oxygen vacancies, with one O atom healing a vacancy and other O atom bonding at the neighboring Ti site as an adatom. Majority (~81%) of O adatoms are found separated from the original vacancy positions, by up to two lattice constants along [001] direction. Since at room temperature the thermal diffusion of O adatoms has been found to be rather small, with experimentally estimated activation energy of ~1.1 eV, we conclude that observed lateral distribution of the oxygen adatoms is attained through a nonthermal, transient mobility in the course of O2 dissociation. Unlike for other known cases of the dissociation of the diatomic molecules where both “hot” adatoms accommodate at the equivalent sites, in the studied system the oxygen atoms filling the vacancies are locked into the bridging oxygen rows and only the O adatoms are relatively free to move. The transient motion of the hyperthermal oxygen adatoms on the TiO2 (110) surface occurs exclusively along the Ti troughs.

36 MATERIALS SCIENCE↗

Photooxidation and Photodesorption in the Photochemistry of Isobutene on TiO2(110)

The photochemistry of isobutene was examined on the rutile TiO2(110) surface as a function of the surface pretreatment condition and irradiation temperature using temperature programmed desorption (TPD) and photon stimulated desorption (PSD). Isobutene adsorbs molecularly on the clean TiO2(110) surface without detectable thermal decomposition. Preadsorption of oxygen, either as atoms or chemisorbed molecules, did not promote thermal reactions with isobutene, but instead blocked isobutene adsorption sites. Ultraviolet (UV) light irradiation of isobutene adsorbed on the clean surface led to depletion through photodesorption without significant photodecomposition. Isobutene PSD yields increased with increasing surface temperature suggesting that activated molecules sample their physisorbed potential energy surface during photodesorption. Preadsorption of oxygen promoted partial photooxidation of adsorbed isobutene to acetone, methacrolein and isobutanal. Acetone was only detected when molecular oxygen was present, indicating that O2 addition occurred across the C=C bond. In contrast, results from use of D6-isobutene indicated that coadsorption with either O adatoms or O2 molecules led to photochemical production of methacrolein (and likely isobutanal) through C-H bond cleavage on a methyl group. Irradiation an adlayer comprised of isobutene isolated from the surface by 1 ML of preadsorbed O2 showed the most photoconversion of isobutene, which suggests that photoactivation of adsorbed O2 is a key step in partial photooxidation of isobutene. Comparison of the isobutene PSD and oxidation product yields as a function of surface temperature between 20 and 120 K indicates a competition between photooxidation and photodesorption that varies with temperature. ‘Direct’ charge transfer events between isobutene and the surface, favored at higher temperature, compete with partial oxidation pathways initiated by ‘indirect’ activation of isobutene by O2, which is favored at low temperature. Access of O2 to the surface is critical to achieving desired isobutene photooxidation rates and products, and isobutene photodesorption may provide a means of regulating the isobutene surface coverage. Work reported here was supported by the U.S. Department of Energy, Office of Basic Energy Science, Division of Chemical Sciences, Geosciences, and Biosciences, and performed in the Williams R. Wiley Environmental Molecular Science Laboratory (EMSL), a Department of Energy user facility funded by the Office of Biological and Environmental Research. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for the U.S. Department of Energy by the Battelle Memorial Institute under contract DEAC05-76RL01830.

Environmental Molecular Sciences Laboratory↗

Kinetic Monte Carlo Study of Ambipolar Lithium Ion and Electron–Polaron Diffusion into Nanostructured TiO2

Nanostructured titania (TiO2) polymorphs have proved to be promising electrode materials for next generation lithium-ion batteries. However, there is still a lack of understanding of the fundamental microscopic processes that control charge transport in these materials. Here we present microscopic simulations of the collective dynamics of lithium-ion (Li+) and charge compensating electron polarons (e-) in rutile TiO2 nanoparticles in contact with idealized conductive matrix and electrolyte. Kinetic Monte Carlo simulations are used, parameterized by molecular dynamics-based predictions of activation energy barriers for Li+ and e- diffusion. Simulations reveal the central role of electrostatic coupling between Li+ and e- on their collective drift diffusion at the nanoscale. They also demonstrate that high contact area between conductive matrix and rutile nanoparticles leads to undesirable coupling-induced surface saturation effects during Li+ insertion, which limits the overall capacity and conductivity of the material. These results help provide guidelines for design of nanostructured electrode materials with improved electrochemical performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probing the photochemistry of chemisorbed oxygen on TiO2(110) with Kr and other co-adsorbates

Weakly bound (physisorbed) atoms and molecules such as Ar, Kr, Xe, CO, CH4, CH3OH, CO2 and N2 are used to probe the photochemical interactions of O2 on rutile TiO2(110). UV irradiation of chemisorbed O2 along with the physisorbed probe species leads to photon-stimulated desorption (PSD) of Ar, Kr, CO, CH4 and N2. Without co-adsorbed O2, the PSD yields of the probe species are very low or not observed. No PSD was observed for CO2, N2O, CH3OH and the PSD yield for Xe is very low compared to the other probe atoms or molecules. The angular distribution of the photo-desorbing Kr, which is broad and cosine, is quite different from the O2 PSD angular distribution, which is sharply peaked along the surface normal. The Kr PSD yields increase with increasing coverage of Kr and of chemisorbed O2. We propose a mechanism for the observed phenomena where the chemisorbed O2 serves as photoactive center, excited via electronic excitations (electrons and/or holes) created in the TiO2 substrate by UV photon irradiation. The photo-excited O2 may transfer its energy to neighboring co-adsorbed atom or molecule resulting in desorption of the latter. Simple momentum transfer considerations suggest that heavier adsorbates (like Xe) and adsorbates with higher binding energy (like CO2) should desorb less efficiently according to the proposed mechanism. Various forms of chemisorbed O2 appeared photoactive in such stimulated desorption of Kr atoms: molecular anions (O22-, O2-), adatoms (Oa), and others. The observed phenomenon provides a new tool for study of photocatalysis.

photochemistry↗

Aggregated TiO2 Based Nanotubes for Dye Sensitized Solar Cells

One-dimensional (1D) semiconducting oxides have attracted great attention for dye sensitized solar cells (DSCs), but the overall performance is still quite limited as compared to TiO2 nanocrystalline DSCs. Here, we report the synthesis of aggregated TiO2 based nanotubes with controlled morphologies and crystalline structures to obtain an overall power conversion efficiency of 9.9% using conventional dye without any additional chemical treatment steps. The high efficiency is attributed to the unique aggregate structure for light harvesting, optimized high surface area, and good crystallinity of the nanotube aggregates obtained through proper thermal annealing. This study demonstrates that high efficiency DSCs can be obtained with 1D nanomaterials, and provides lessons on the importance of optimizing both the nanocrystalline structure and the overall microscale morphology.

aggregates↗

Materials Data on TiO2 by Materials Project

TiO2 is trigonal omega-like structured and crystallizes in the trigonal R-3m space group. The structure is two-dimensional and consists of three TiO2 sheets oriented in the (0, 0, 1) direction. Ti4+ is bonded to six equivalent O2- atoms to form edge-sharing TiO6 octahedra. All Ti–O bond lengths are 1.98 Å. O2- is bonded in a distorted trigonal non-coplanar geometry to three equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 crystallizes in the monoclinic P2_1/m space group. The structure is two-dimensional and consists of one TiO2 sheet oriented in the (0, 0, 1) direction. there are two inequivalent Ti4+ sites. In the first Ti4+ site, Ti4+ is bonded in a trigonal planar geometry to three O2- atoms. There are a spread of Ti–O bond distances ranging from 1.63–1.87 Å. In the second Ti4+ site, Ti4+ is bonded to five O2- atoms to form a mixture of distorted edge and corner-sharing TiO5 trigonal bipyramids. There are a spread of Ti–O bond distances ranging from 1.81–2.00 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted T-shaped geometry to three equivalent Ti4+ atoms. In the second O2- site, O2- is bonded in a single-bond geometry to one Ti4+ atom. In the third O2- site, O2- is bonded in a bent 150 degrees geometry to two Ti4+ atoms. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to two Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 crystallizes in the orthorhombic Cmm2 space group. The structure is two-dimensional and consists of one TiO2 sheet oriented in the (0, 0, 1) direction. there are two inequivalent Ti4+ sites. In the first Ti4+ site, Ti4+ is bonded in a distorted single-bond geometry to five O2- atoms. There are a spread of Ti–O bond distances ranging from 1.63–2.09 Å. In the second Ti4+ site, Ti4+ is bonded to four O2- atoms to form corner-sharing TiO4 tetrahedra. There is two shorter (1.81 Å) and two longer (1.86 Å) Ti–O bond length. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three Ti4+ atoms. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to two equivalent Ti4+ atoms. In the third O2- site, O2- is bonded in a single-bond geometry to one Ti4+ atom. In the fourth O2- site, O2- is bonded in a bent 120 degrees geometry to two equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 crystallizes in the orthorhombic Cmm2 space group. The structure is two-dimensional and consists of one TiO2 sheet oriented in the (0, 0, 1) direction. there are two inequivalent Ti4+ sites. In the first Ti4+ site, Ti4+ is bonded in a distorted single-bond geometry to five O2- atoms. There are a spread of Ti–O bond distances ranging from 1.63–2.09 Å. In the second Ti4+ site, Ti4+ is bonded to four O2- atoms to form corner-sharing TiO4 tetrahedra. There is two shorter (1.81 Å) and two longer (1.87 Å) Ti–O bond length. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three Ti4+ atoms. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to two equivalent Ti4+ atoms. In the third O2- site, O2- is bonded in a single-bond geometry to one Ti4+ atom. In the fourth O2- site, O2- is bonded in a bent 120 degrees geometry to two equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 is trigonal omega-like structured and crystallizes in the trigonal R-3m space group. The structure is two-dimensional and consists of three TiO2 sheets oriented in the (0, 0, 1) direction. Ti4+ is bonded to six equivalent O2- atoms to form edge-sharing TiO6 octahedra. All Ti–O bond lengths are 1.98 Å. O2- is bonded in a distorted trigonal non-coplanar geometry to three equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗