Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transient diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Anisotropic Exciton Transport in a Lamellar CsPbBr 3 Nanocrystal Superlattice

Colloidal self-assembly is one strategy for engineering anisotropic properties into otherwise isotropic materials. In this work, we demonstrate anisotropic exciton transport in an A 2 B-type superlattice containing columns of 5.3 nm CsPbBr 3 nanocubes assembled into a hexagonal lattice around 6.5 nm LaF 3 nanodisks. Using transient photoluminescence microscopy, we determined that the exciton diffusivity along the fast axis of the superlattice is more than twice as large as that along the slow axis at T = 5 K, but that anisotropy is greatly suppressed at room temperature. Calculations of the diffusivity anisotropy ratio based on Förster theory overestimate the measured values, highlighting the limitations of this theory in completely describing exciton transport. Overall, our results demonstrate how self-assembly of colloidal nanocrystals can be used to engineer directional energy transport, and raise more questions about the microscopic nature of dipole coupling in CsPbBr 3 NC superlattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Substrate Channeling via a Transient Protein-Protein Complex: The case of D-Glyceraldehyde-3-Phosphate Dehydrogenase and L-Lactate Dehydrogenase

Molecular dynamics studies showed that LDH and GAPDH tetramers can form a complex which can breakdown when the enzymes are saturated with NADH molecules. The interaction sites are conserved between LDH isozymes from heart and muscle cells, and between GAPDH molecules from rabbit and yeast cells. Positive electric fields between the NAD(H) binding sites showed that NAD(H) channeling within LDH-GAPDH complex can be an extension of NAD(H) channeling between the adjacent subunits within LDH and GAPDH tetramers. Analytical ultracentrifugation and enzyme kinetics studies indicated that LDH and GAPDH molecules can form a transient channeling complex. The transient complex can support the channeled and the diffusive paths in parallel, the relative contribution from each path depends on the off-rates for (GAPDH-NADH)-LDH complex and GAPDH-NADH complex. Negative cooperativity in NADH binding to different subunits in GAPDH tetramers can provide allosteric regulation of NADH channeling from GAPDH to LDH.

INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMI↗
NASA NTRS1984

MPD thruster operation with stepped current input

Experimental study of the response of a quasi-steady MPD thruster to an incremental increase or decrease in current illuminates the processes by which the discharge adjusts to changes in its operating level. For changes well below the onset condition, the thruster maintains quasi-steady operation throughout. Changes imposed near onset produce transition periods of non-quasi-steady operation. The duration of the transient appears to be determined by magnetic field diffusion in the portion of the discharge downstream of the thrust chamber.

Jahn, R. G.↗
NASA NTRS1987

Calculating Transport Of Moisture Through Honeycomb Panels

Diffusion equations solved for steady-state and transient conditions. HUMID is computer program for predicting moisture gradients and internal bursting pressure in composite honeycomb-sandwich panels. Designed to monitor ebb and flow of moisture in Space Shuttle Orbiter payload bay doors, but applicable for general use. Written in FORTRAN.

Martin, R. T.↗
NASA NTRS1991

Thermal and solutal conditions at the tips of a directional dendritic growth front

The line-of-sight averaged, time-dependent dendrite tip concentrations for the diffusion dominated vertical directional solidification of a metal model (ammonium chloride and water) were obtained by extrapolating exponentially fit diffusion layer profiles measured using a laser interferometer. The tip concentrations were shown to increase linearly with time throughout the diffusion dominated growth process for an initially stagnant dendritic array. The process was terminated for the cases chosen by convective breakdown suffered when the conditionally stable diffusion layer exceeded the critical Rayleigh criteria. The transient tip concentrations were determined to significantly exceed the values predicted for steady state, thus producing much larger constitutional undercoolings. This has ramifications for growth speeds, arm spacings and the dendritic structure itself.

Mccay, T. D.↗
NASA NTRS1993

A numerical procedure for analysis of finite rate reacting flows

Combustion processes in rocket propulsion systems are characterized by the existence of multiple, vastly differing time and length scales, as well as flow-speeds at wide variation of Mach numbers. The chemical kinetics processes in the highly active reaction zone are characterized by much smaller scales compared to fluid convective and diffusive time scales. An operator splitting procedure for transient finite rate chemistry problems has been developed using a pressure based method, which can be applied to all speed flows without difficulties. The splitting of chemical kinetics terms formed the fluid-mechanical terms of the species equation ameliorated the difficulties associated with the disparate time scales and stiffness in the set of equations which describes highly exothermic combustion. A combined efficient ordinary differential equations (ODE) solver was used to integrate the effective chemical source terms over the residence time at each grid cell. One and two dimensional reacting flow situations were carried out to demonstrate and verify the current procedure. Different chemical kinetics with different degrees of nonlinearity have also been incorporated to test the robustness and generality of the proposed method.

Shang, H. M.↗
DOE OSTI2025

Effects of Temperature Fluctuations on Surface Mobility of Atomic Steps and Oxidation Dynamics in High-Temperature Alloys

In contrast to the traditional perspective that thermal fluctuations are insignificant in surface dynamics, here we report their influence on surface reaction dynamics. Using real-time low-energy electron microscopy imaging of NiAl(100) under both vacuum and O 2 atmospheres, we demonstrate that transient temperature variations substantially alter the direction of atom diffusion between the surface and bulk, leading to markedly different oxidation outcomes. During heating, substantial outward diffusion of atoms from the bulk to the surface results in step growth. Conversely, cooling induces considerable inward diffusion of adatoms, producing a distinct oxide morphology. In both scenarios, initially formed oxide islands impede local atomic step mobility, thereby increasing step length due to mass transfer between the surface and bulk, with atomic steps acting as adatom sinks during heating and sources during cooling. Furthermore, we show that this pinning effect on atomic step mobility can be mitigated by applying persistent temperature fluctuations. As a result, understanding these nuances is vital for accurately predicting and dynamically manipulating the performance of active materials in various chemical processes under transient thermal conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The Role of Surface Hydroxyls in the Mobility of Carboxylates on Surfaces: Dynamics of Acetate on Anatase TiO 2 (101)

The dynamics of reactive intermediates are important in catalysis for understanding transient species, which can drive reactivity and the transport of species to reaction centers. In particular, the interplay between surface-bound carboxylic acids and carboxylates is important for numerous chemical transformations, including CO 2 hydrogenation and ketonization. Here, we investigate the dynamics of acetic acid on anatase TiO 2 (101) using scanning tunneling microscopy experiments and density functional theory calculations. We demonstrate the concomitant diffusion of bidentate acetate and a bridging hydroxyl and provide evidence for the transient formation of molecular monodentate acetic acid. The diffusion rate is strongly dependent on the position of hydroxyl and adjacent acetate(s). A facile three-step diffusion process is proposed consisting of acetate and hydroxyl recombination, acetic acid rotation, and acetic acid dissociation. Here this study clearly demonstrates that the dynamics of bidentate acetate could be important in forming monodentate species, which are proposed to drive selective ketonization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1996

Permeation of protons, potassium ions, and small polar molecules through phospholipid bilayers as a function of membrane thickness

Two mechanisms have been proposed to account for solute permeation of lipid bilayers. Partitioning into the hydrophobic phase of the bilayer, followed by diffusion, is accepted by many for the permeation of water and other small neutral solutes, but transient pores have also been proposed to account for both water and ionic solute permeation. These two mechanisms make distinctively different predictions about the permeability coefficient as a function of bilayer thickness. Whereas the solubility-diffusion mechanism predicts only a modest variation related to bilayer thickness, the pore model predicts an exponential relationship. To test these models, we measured the permeability of phospholipid bilayers to protons, potassium ions, water, urea, and glycerol. Bilayers were prepared as liposomes, and thickness was varied systematically by using unsaturated lipids with chain lengths ranging from 14 to 24 carbon atoms. The permeability coefficient of water and neutral polar solutes displayed a modest dependence on bilayer thickness, with an approximately linear fivefold decrease as the carbon number varied from 14 to 24 atoms. In contrast, the permeability to protons and potassium ions decreased sharply by two orders of magnitude between 14 and 18 carbon atoms, and leveled off, when the chain length was further extended to 24 carbon atoms. The results for water and the neutral permeating solutes are best explained by the solubility-diffusion mechanism. The results for protons and potassium ions in shorter-chain lipids are consistent with the transient pore model, but better fit the theoretical line predicted by the solubility-diffusion model at longer chain lengths.

NASA Program Exobiology↗
DOE OSTI2020

Ultrafast Exciton Transport with a Long Diffusion Length in Layered Perovskites with Organic Cation Functionalization

Abstract Layered perovskites have been employed for various optoelectronic devices including solar cells and light‐emitting diodes for improved stability, which need exciton transport along both the in‐plane and the out‐of‐plane directions. However, it is not clear yet what determines the exciton transport along the in‐plane direction, which is important to understand its impact toward electronic devices. Here, by employing both steady‐state and transient photoluminescence mapping, it is found that in‐plane exciton diffusivities in layered perovskites are sensitive to both the number of layers and organic cations. Apart from exciton–phonon coupling, the octahedral distortion is revealed to significantly affect the exciton diffusion process, determined by temperature‐dependent photoluminescence, light‐intensity‐dependent time‐resolved photoluminescence, and density function theory calculations. A simple fluorine substitution to phenethylammonium for the organic cations to tune the structural rigidity and octahedral distortion yields a record exciton diffusivity of 1.91 cm 2 s −1 and a diffusion length of 405 nm along the in‐plane direction. This study provides guidance to manipulate exciton diffusion by modifying organic cations in layered perovskites.

Xiao, Xun↗
DOE OSTI2022

On the Importance of Using Event-Specific Wave Diffusion Rates in Modeling Diffuse Electron Precipitation

A few to tens of keV electron precipitation that carries substantial energy source down to the upper atmosphere to create aurora is manifested as an important magnetosphere-ionosphere coupling process. The precipitation is usually caused by scattering processes associated with plasma waves in the magnetosphere. The scattering process is often quantified by wave diffusion rates that indicate how fast an electron is scattered. Global models commonly use diffusion coefficients that are derived from statistical wave models. However, due to the statistical nature, many localized, transient features could be smeared out. In this study, we investigate electron precipitation using event-specific diffusion coefficients that are obtained based on simultaneous in-situ measured/inferred, rather than statistical, chorus wave dynamics. We find that the application of the event-specific diffusion coefficients associated with a more dynamic and intense chorus wave model leads more electrons, particularly at several to tens of keV in the dawn-to-noon sector at L > 3, to precipitate than using statistical coefficients. Here, the new simulation roughly captures both the intensity and variability of the precipitating flux as detected by the NOAA/POES satellites. Ionospheric electron density in the lower E region (100–120 km) observed by the mid-latitude Millstone Hill radar is also much better reproduced, while the case using statistical diffusion coefficients underestimates the ionization rate. This study implies the importance of using event-specific diffusion rates in simulating the diffuse electron precipitation and understanding the magnetosphere-ionosphere coupling.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2000

Effect of Thermal Diffusivity on the Detectability of TNDE

The effect of thermal diffusively on the defect detectability in Carbon/Epoxy composite panels by transient thermography is presented in this paper. A series of Finite Element Models were constructed and analyzed to simulate the transient heat transfer phenomenon during Thermographic Non-destructive Evaluation (TNDE) of composite panels with square defects. Six common carbon fibers were considered. The models were built for composites with various combinations of fibers and volumetric ratios. Finite Element Analysis of these models showed the trends of the detectable range and the maximum thermal contrast versus the thermal diffusivity of various composites. Additionally, the trends of defect size to depth ratio and the thermal contrast has been investigated.

Zhao, Junduo↗
DOE OSTI2024

Defect Production and Microstructural Feature Impact for Radiation Damage in Additively Manufactured 316 Stainless Steel

This milestone presents multi-scale modeling research results for additively manufactured 316 stainless steel. A combination of phase field, cluster dynamics, molecular dynamics, and density functional theory with machine learning is used, allowing for predictions of radiation-driven microstructural evolution in additively manufactured 316 stainless steel over a range of temperatures, damage rates, neutron spectra, and microstructures, and supporting the development of combined ion and neutron irradiation for material qualification. Informed by ion irradiation and neutron irradiation results across the Advanced Materials and Manufacturing Technologies program, we investigate the unique aspects of radiation-driven microstructure evolution in additively manufactured 316 stainless steel. In particular, we focus on understanding the impact of carbon concentration (varying, for example, between the 316L and 316H standards) on void formation; radiation-induced segregation at dislocation cells and grain boundaries; and the evolution of dislocation loops and network dislocation populations. We find that the unique characteristics of the additively manufactured microstructures must be accounted for in understanding the evolution of dislocation populations under thermal and irradiation conditions, such as the variation in sink strengths arising due to the variation in dislocation density. We also find that the radiation-induced segregation of Cr and Ni to grain boundaries and cell walls differs due to the differences in their defect sink biases. We also find that increasing the Ni content can slow vacancy diffusion, which may provide a mechanism for the observed reduction in transient swelling rate for austenitic Fe-Cr-Ni alloys with increasing Ni content. In addition, ion irradiations have shown that increasing carbon content in 316 SS results in a larger population of smaller voids, suggesting reduced vacancy diffusion. Our results show that the carbon content of additively manufactured 316 SS has a significant impact on the migration rate of defect clusters. The presence of carbon atoms results in carbon-vacancy trapping, significantly reducing the diffusion rate of vacancies. Carbon atoms may also be trapped near the surface of a void, which may reduce void growth by trapping vacancies that diffuse toward the void.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Combined visualisation of cavitation and vortical structures in a real-size optical diesel injector

A high-speed flow visualisation set-up comprising of combined diffuse backlight illumination (DBI) and schlieren imaging has been developed to illustrate the highly transient, two-phase flow arising in a real-size optical fuel injector. The different illumination nature of the two techniques, diffuse and parallel light respectively, allows for the capturing of refractive-index gradients due to the presence of both interfaces and density gradients within the orifice. Hence, the onset of cavitation and secondary-flow motion within the sac and injector hole can be concurrently visualised. Experiments were conducted utilising a diesel injector fitted with a single-hole transparent tip (ECN spray D) at injection pressures of 700–900 bar and ambient pressures in the range of 1–20 bar. High-speed DBI images obtained at 100,000 fps revealed that the orifice, due to its tapered layout, is mildly cavitating with relatively constant cavity sheets arising mainly in regions of manufacturing imperfections. Nevertheless, schlieren images obtained at the same frame rate demonstrated that a multitude of vortices with short lifetimes arise at different scales in the sac and nozzle regions during the entire duration of the injection cycle but the vortices do not necessarily result in phase change. The magnitude and exact location of coherent vortical structures have a measurable influence on the dynamics of the spray emerging downstream the injector outlet, leading to distinct differences in the variation of its cone angle depending on the injection and ambient pressures examined.

42 ENGINEERING↗
NASA NTRS2003

Tidal volume single-breath washin of SF6 and CH4 in transient microgravity

We performed tidal volume single-breath washins (SBW) by using tracers of different diffusivity and varied the time spent in microgravity (microG) before the start of the tests to look for time-dependent effects. SF(6) and CH(4) phase III slopes decreased by 35 and 26%, respectively, in microG compared with 1 G (P < 0.05), and the slope difference between gases disappeared. There was no effect of time in microG, suggesting that neither the hypergravity period preceding microG nor the time spent in microG affected gas mixing at volumes near functional residual capacity. In previous studies using SF(6) and He (Lauzon A-M, Prisk GK, Elliott AR, Verbanck S, Paiva M, and West JB. J Appl Physiol 82: 859-865, 1997), the vital capacity SBW showed an increase in slope difference between gases in transient microG, the opposite of the decrease in sustained microG. In contrast, tidal volume SBW showed a decrease in slope difference in both microG conditions. Because it is only the behavior of the more diffusive gas that differed between maneuvers and microG conditions, we speculate that, in the previous vital capacity SBW, the hypergravity period preceding the test in transient microG provoked conformational changes at low lung volumes near the acinar entrance.

Parabolic Flight↗
NASA NTRS2003

Thermal Property Measurement of Semiconductor Melt using Modified Laser Flash Method

This study further developed standard laser flash method to measure multiple thermal properties of semiconductor melts. The modified method can determine thermal diffusivity, thermal conductivity, and specific heat capacity of the melt simultaneously. The transient heat transfer process in the melt and its quartz container was numerically studied in detail. A fitting procedure based on numerical simulation results and the least root-mean-square error fitting to the experimental data was used to extract the values of specific heat capacity, thermal conductivity and thermal diffusivity. This modified method is a step forward from the standard laser flash method, which is usually used to measure thermal diffusivity of solids. The result for tellurium (Te) at 873 K: specific heat capacity 300.2 Joules per kilogram K, thermal conductivity 3.50 Watts per meter K, thermal diffusivity 2.04 x 10(exp -6) square meters per second, are within the range reported in literature. The uncertainty analysis showed the quantitative effect of sample geometry, transient temperature measured, and the energy of the laser pulse.

Lin, Bochuan↗
DOE OSTI2021

High-resolution radiation detection using Ni/SiO 2 /n-4H-SiC vertical metal-oxide-semiconductor capacitor

In this article, we demonstrate the radiation detection performance of vertical metal-oxide-semiconductor (MOS) capacitors fabricated on 20 μm thick n-4H-SiC epitaxial layers with the highest energy resolution ever reported. The 100 nm SiO2 layer was achieved on the Si face of n-4H-SiC epilayers using dry oxidation in air. The Ni/SiO2/n-4H-SiC MOS detectors not only demonstrated an excellent energy resolution of 0.42% (ΔE/E 100) for 5.48 MeV alpha particles but also caused a lower enhancement in the electronic noise components of the spectrometer compared with that observed for the best high-resolution Schottky barrier detectors. The MOS detectors also exhibited a high charge collection efficiency (CCE) of 96% at the optimized operating bias despite the presence of the oxide layer. A drift-diffusion model applied to the CCE vs gate bias voltage data revealed a minority (hole) carrier diffusion length of 24 μm. Capacitance mode deep level transient spectroscopy (C-DLTS) scans in the temperature range 84–800 K were carried out to identify the resolution limiting electrically active defects. Interestingly, the C-DLTS spectra revealed both positive and negative peaks, indicating the simultaneous presence of electron (majority) and hole (minority) trap centers. It has been inferred that at the steady-state bias for the C-DLTS measurement, the MOS detector operates in the inversion mode at certain device temperatures, causing holes to populate the minority trap centers and, hence, manifests minority carrier peaks as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗