Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Investigating the Role of Vacancies on the Thermoelectric Properties of EuCuSb‐Eu 2 ZnSb 2 Alloys

Abstract AMX compounds with the ZrBeSi structure tolerate a vacancy concentration of up to 50 % on the M ‐site in the planar MX ‐layers. Here, we investigate the impact of vacancies on the thermal and electronic properties across the full EuCu 1− x Zn 0.5 x Sb solid solution. The transition from a fully‐occupied honeycomb layer (EuCuSb) to one with a quarter of the atoms missing (EuZn 0.5 Sb) leads to non‐linear bond expansion in the honeycomb layer, increasing atomic displacement parameters on the M and Sb‐sites, and significant lattice softening. This, combined with a rapid increase in point defect scattering, causes the lattice thermal conductivity to decrease from 3 to 0.5 W mK −1 at 300 K. The effect of vacancies on the electronic properties is more nuanced; we see a small increase in effective mass, large increase in band gap, and decrease in carrier concentration. Ultimately, the maximum zT increases from 0.09 to 0.7 as we go from EuCuSb to EuZn 0.5 Sb.

36 MATERIALS SCIENCE↗

Characterization of Free Surface-Bound and Entrapped Water Environments in Poly(N-Isopropyl Acrylamide) Hydrogels via 1H HRMAS PFG NMR Spectroscopy

We found that different water environments in poly(N-isopropyl acrylamide) (PNIPAAm) hydrogels are identified and characterized using 1 H high resolution magic angle spinning (HRMAS) nuclear magnetic resonance (NMR). Local water environments corresponding to a “free” highly mobile species, along with waters showing restricted dynamics are resolved in these swollen hydro-gels. For photo-initiated polymerized PNIPAAm gels, an additional entrapped water species is observed. Spin–spin R 2 relaxation experiments support the argument of reduced mobility in the restricted and entrapped water species. Furthermore, by combining pulse field gradient techniques with HRMAS NMR it is possible to directly measure the self-diffusion rate for these different water environments. The behavior of the heterogeneous water environments through the lower critical solution temperature transition is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioinspired Dry‐Steam Superinsulation Straw Foam

Abstract Cellulosic materials offer sustainable advantages for building energy conservation. However, their development has been hindered by reduced thermal performance, often caused by structural collapse during the transition from solution to solid. Inspired by natural goose down, a bio‐based, lightweight insulation foam derived from agricultural waste straw is presented. Through in situ synthesis, bio‐silica fibers with branched structures capable of supporting hollow silica microspheres are fabricated. After steam‐mediated processing, the resulting foam exhibit low density (95 mg cm − 3 ), high porosity (95.5%), low thermal conductivity (0.03 ± 0.003 W mK −1 ), and a cyclic compressive strength of 90 kPa at 50% strain. Owing to the synergistic microstructure formed by branched bio‐fibers and hollow silica spheres, the bio‐silica foam exhibit outstanding thermal insulation performance relative to other bio‐based foams prepared by ambient drying. A passivated insulation panel is further developed by incorporating this material as the core component, achieving a thermal conductivity of 0.0275 W mk −1 and flexural strength of 6.85 MPa. The panel demonstrated durability with stable thermal performance throughout a 60‐day outdoor test. Moreover, the bio‐silica foam shows a carbon footprint of 7.50 kgCO₂ kg −1 at 70.2 wt.% silica, highlighting its promise as a sustainable insulation solution for green buildings.

Chemistry↗

Characterization of Electrospray Ionization (ESI) Parameters on In-ESI Hydrogen/Deuterium Exchange of Carbohydrate-Metal Ion Adducts

The conformations of glycans are crucial for their biological functions. In-electrospray ionization (ESI) hydrogen/deuterium exchange-mass spectrometry (HDX-MS) is a promising technique for studying carbohydrate conformations since rapidly exchanging functional groups, e.g., hydroxyls, can be labeled on the timeframe of ESI. However, regular application of in-ESI HDX to characterize carbohydrates requires further analysis of the in-ESI HDX methodology. For instance, in this method, HDX occurs concurrently to the analyte transitioning from solution to gas-phase ions. Therefore, there is a possibility of sampling both gas-phase and solution-phase conformations of the analyte. Herein, we differentiate in-ESI HDX of metal-adducted carbohydrates from gas-phase HDX and illustrate that this method analyzes solvated species. We also systematically examine the effects of ESI parameters, including spray solvent composition, auxiliary gas flow rate, sheath gas flow rate, sample infusion rate, sample concentration, and spray voltage, and discuss their effects on in-ESI HDX. Further, we model the structural changes of a trisaccharide, melezitose, and its intramolecular and intermolecular hydrogen bonding in solvents with different compositions of methanol and water. These molecular dynamic simulations support our experimental results and illustrate how an individual ESI parameter can alter the conformations we sample by in-ESI HDX. Overall, this work illustrates how the fundamental processes of ESI alter the magnitude of HDX for carbohydrates and suggest parameters that should be considered and/or optimized prior to performing experiments with this in-ESI HDX technique.

Carbohydrate Conformation↗

Inequality and the Future of Electric Mobility in 36 U.S. Cities: An Innovative Methodology and Comparative Assessment

Electric vehicles are seen as one of the technological solutions to transition our transportation systems away from carbon, and cities offer unique opportunities to electrify transportation. To be equitable, however, this transition will not merely require technological innovations. Acknowledging socio-spatial inequalities and creating strategies to address them are critical - yet relatively underexplored - dimensions of the transportation transition. This paper integrates relevant literature into a micro-urban social typology (MUST) approach that uses agglomerative clustering techniques to examine, first, the factors and attributes defining transportation inequities within 36 U.S. cities, and, second, the implications of these inequities for policies that foster a more equitable transportation transition. By combining socio-spatial and transportation data, we identified five MUSTs: Wealthy, Urban Disadvantaged, Urban Renters, Middle-Class Homeowners, and Rural/Exurban. Rather than being tied to any particular indicator (e.g., homeownership), these MUSTs contain intersecting factors and features of inequities. We compare transportation and health outcomes across MUSTs, and the results suggest that user-centric strategies and public investments are necessary to foster true transportation equity. These must go beyond the electrification of private vehicles and should be tailored to the specific characteristics of each MUST. These could include electric carpooling for the rural/exurban MUST and electrification of transit for the urban disadvantaged and renter MUSTs. Our typology offers a critical next step toward informing transportation transition policies to target critical sociodemographic, economic, and techno-infrastructural factors.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗

Effect of silver on phase separation and crystallization of niobium oxide containing glasses

Effect of silver introduction in sodium phosphate and sodium borophosphate glasses containing large amount of niobium oxide have been investigated using differential scanning calorimetry and XRD. Same sodium niobate phase in the Nb{sub 2}O{sub 5}-NaNbO{sub 3} based solid solution have been observed following two heat treatments designed for nucleation and growth of the crystalline phase. Silver introduction in the glass composition is clearly responsible for increasing the crystallization rate. Its effect after nucleation and crystallization treatments has been shown. Phase metastable separation is occurring during heat treatment with formation of a phosphate rich and niobium rich phase. Crystallization effect on optical transparency of glasses and on Raman scattering response have been investigated. - Graphical abstract: HRSEM micrograph of acid etched surface of silver doped sodium and niobium phosphate glass after nucleation heat treatment before (a) and after second heat treatment (b), (c) leading to phase separation and crystallization.

36 MATERIALS SCIENCE↗

The electronic structures of vanadate salts: Cation substitution as a tool for band gap manipulation

The electronic structures of six ternary metal oxides containing isolated vanadate ions, Ba{sub 3}(VO{sub 4}){sub 2}, Pb{sub 3}(VO{sub 4}){sub 2}, YVO{sub 4}, BiVO{sub 4}, CeVO{sub 4} and Ag{sub 3}VO{sub 4} were studied using diffuse reflectance spectroscopy and electronic structure calculations. While the electronic structure near the Fermi level originates largely from the molecular orbitals of the vanadate ion, both experiment and theory show that the cation can strongly influence these electronic states. The observation that Ba{sub 3}(VO{sub 4}){sub 2} and YVO{sub 4} have similar band gaps, both 3.8 eV, shows that cations with a noble gas configuration have little impact on the electronic structure. Band structure calculations support this hypothesis. In Pb{sub 3}(VO{sub 4}){sub 2} and BiVO{sub 4} the band gap is reduced by 0.9-1.0 eV through interactions of (a) the filled cation 6s orbitals with nonbonding O 2p states at the top of the valence band, and (b) overlap of empty 6p orbitals with antibonding V 3d-O 2p states at the bottom of the conduction band. In Ag{sub 3}VO{sub 4} mixing between filled Ag 4d and O 2p states destabilizes states at the top of the valence band leading to a large decrease in the band gap (E{sub g}=2.2 eV). In CeVO{sub 4} excitations from partially filled 4f orbitals into the conduction band lower the effective band gap to 1.8 eV. In the Ce{sub 1-x}Bi{sub x}VO{sub 4} (0<=x<=0.5) and Ce{sub 1-x}Y{sub x}VO{sub 4} (x=0.1, 0.2) solid solutions the band gap narrows slightly when Bi{sup 3+} or Y{sup 3+} are introduced. The nonlinear response of the band gap to changes in composition is a result of the localized nature of the Ce 4f orbitals. - Graphical abstract: The electronic structures of six vanadate salts, Ba{sub 3}(VO{sub 4}){sub 2}, Pb{sub 3}(VO{sub 4}){sub 2}, YVO{sub 4}, BiVO{sub 4}, Ag{sub 3}VO{sub 4} and CeVO{sub 4}, are studied. The results show that the oxygen to vanadium charge transfer, which is largely responsible for the electronic structure near the Fermi level, can be altered significantly through interactions with the surrounding cations.

36 MATERIALS SCIENCE↗

Europium substitution into intermetallic phases grown in Ca/Zn flux

Replacement of calcium with europium in the phases Ca{sub 21}Ni{sub 2}Zn{sub 36} and CaNi{sub 2}Zn{sub 3} was attempted to explore the possibility of substitution in metal flux reactions and potential magnetic interactions between closely spaced Eu{sup 2+} ions. Limited substitution occurs when Eu is added to the reaction of nickel in a Ca/Zn flux mixture, up to stoichiometries of Eu{sub 5.8(3)}Ca{sub 15.2(3)}Ni{sub 2}Zn{sub 36} and Eu{sub 0.42(8)}Ca{sub 0.58(8)}Ni{sub 2}Zn{sub 3}. Structural characterization and magnetic susceptibility studies on Eu{sub x}Ca{sub 21-x}Ni{sub 2}Zn{sub 36} phases indicate that the Eu and Ca ions do not form an even solid solution on their sites, but instead segregate in separate regions of the crystals. The europium-rich regions of the samples order ferromagnetically, with T{sub C} dependent on the size of the clusters. If the concentration of Eu in the flux is raised above 20 mol%, a new compound Eu{sub 1.63(1)}Ca{sub 1.37(1)}Ni{sub 2}Zn{sub 3} (Cmcm, a=4.1150(5) A, b=16.948(2) A, c=10.302(1) A, Z=4, R{sub 1}=0.0396) is produced. - Graphical abstract: Exploration of europium substitution into intermetallic compounds grown in Ca/Zn flux has yielded analogs of Eu{sub x}Ca{sub 21-x}Ni{sub 2}Zn{sub 36} with unusual magnetic properties due to segregation of europium in the crystals; high concentrations of Eu in the flux trigger the growth of Eu{sub 1.63(1)}Ca{sub 1.37(1)}Ni{sub 2}Zn{sub 3} with a new structure type.

36 MATERIALS SCIENCE↗

Shape-controlled synthesis of gold icosahedra and nanoplates using Pluronic P123 block copolymer and sodium chloride

Gold icosahedra with an average diameter of about 600 nm were easily prepared by heating an aqueous solution of the amphiphilic block copolymer, poly(ethylene oxide){sub 20}-poly(propylene oxide){sub 70}-poly(ethylene oxide){sub 20} (Pluronic P123), and hydrogen tetrachloroaurate(III) trihydrate (HAuCl{sub 4}.3H{sub 2}O) at 60 deg. C for 25 min. When sodium chloride (NaCl:HAuCl{sub 4} molar ratio=10:1) was added to this aqueous solution, gold nanoplates were produced. The chloride ion was found to be a key component in the formation of the gold nanoplates by facilitating the growth of {l_brace}111{r_brace} oriented hexagonal/triangular gold nanoplates, because similar gold nanoplates were produced when LiCl or KCl was added to the aqueous solution instead of NaCl, while gold nanocrystals having irregular shapes were produced when NaBr or NaI was added. - Graphical abstract: Gold icosahedra were prepared by heating an aqueous solution of Pluronic P123 and HAuCl{sub 4}. When NaCl was added to this solution, gold nanoplates were produced.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Roles of Bi, M and VO{sub 4} tetrahedron in photocatalytic properties of novel Bi{sub 0.5}M{sub 0.5}VO{sub 4} (M=La, Eu, Sm and Y) solid solutions for overall water splitting

Novel Bi{sub 0.5}M{sub 0.5}VO{sub 4} (BMV; M=La, Eu, Sm and Y) solid solutions were prepared and studied in this paper. All the samples were proved to produce H{sub 2} and O{sub 2} simultaneously from pure water under the irradiation of UV light. M-O bond lengths were proved to increase with M cations by refining cell parameters and atomic positions. Besides, band gaps, energy gaps and photocatalytic activities of BMV also changed with M cations. Both of M-O and V-O bond lengths were suggested to account for this phenomenon. Inactive A{sub 0.5}Y{sub 0.5}VO{sub 4} (A=La, Ce) for water splitting proved incorporation of Bi rather than distortion of VO{sub 4} tetrahedron was a critical factor for improving efficiency of overall water splitting by facilitating the generation of electron and hole with lighter effective masses. Replacement of Bi by M cations not only gave indirect effect on band structure but also raised position of conduction band minimum to meet requirement of H{sub 2} production. - Graphical abstract: Novel Bi{sub 0.5}M{sub 0.5}VO{sub 4} (M=La, Eu, Sm and Y) solid solutions showed the high and stable photocatalytic activities for overall water splitting with their crystal radii of M elements. Highlights: Black-Right-Pointing-Pointer BMV solid solutions were novel highly efficient V-based photocatalysts for overall water splitting. Black-Right-Pointing-Pointer Photocatalytic activity of BMV solid solution related to the effective ionic radii of M cations. Black-Right-Pointing-Pointer Incorporation of Bi is one of key factors for the highly efficient activity of BMV solid solution. Black-Right-Pointing-Pointer Incorporation of Y is dispensable for H{sub 2} production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of metal loading processes on the stability and thermal transformation of Co{sup 2+}- and Cu{sup 2+}-zeolite Y prepared from Egyptian kaolin

This paper aims to assess the effect of the transition metals (TM) loading procedure on the incorporation of Co{sup 2+} and Cu{sup 2+} in zeolite Y, and their relevance to stability of the zeolite, particularly with respect to the thermal transformation to the spinel phases. In this work, zeolite Y prepared from Egyptian kaolin was used. XRF, XRD, TEM, UV/visible absorption measurements, and atomic absorption analyses in addition to the visual observations are recorded. XRF has been used to investigate the materials composition. TEM and XRD indicate the presence of nanoparticle spinel upon the calcination of the TM-zeolites at 1000 Degree-Sign C. In addition to spinel particles, XRD shows the formation of metal oxides, SiO{sub 2} and alumino-silicate phases. According to the transition metal and the cation loading process, different phases were detected. UV/visible absorption measurements and the visual observations are used to determine the experimental condition of the highest spinel content. It has been noticed that the experimental conditions of the metal sorption processes greatly affect the phase transformation. Stability and thermal transformation of zeolite depend on the initial concentration of the transition cation solutions and the number of loading cycles. - Highlights: Black-Right-Pointing-Pointer We study the effects of loading procedure in the incorporation of TM in zeolite Y. Black-Right-Pointing-Pointer Synthetic zeolite Y prepared from Egyptian kaolin has been used. Black-Right-Pointing-Pointer The type of TM affects the stability and thermal transformation of zeolite. Black-Right-Pointing-Pointer Loading processes affect the stability and thermal transformation of zeolite.

36 MATERIALS SCIENCE↗

Uncovering electron scattering mechanisms in NiFeCoCrMn derived concentrated solid solution and high entropy alloys

Abstract Whilst it has long been known that disorder profoundly affects transport properties, recent measurements on a series of solid solution 3d -transition metal alloys reveal two orders of magnitude variations in the residual resistivity. Using ab initio methods, we demonstrate that, while the carrier density of all alloys is as high as in normal metals, the electron mean-free-path can vary from ~10 Å (strong scattering limit) to ~10 3 Å (weak scattering limit). Here, we delineate the underlying electron scattering mechanisms responsible for this disparate behavior. While site-diagonal, spin dependent, potential scattering is always dominant, for alloys containing only Fe, Co, and Ni the majority-spin channel experiences negligible disorder scattering, thereby providing a short circuit, while for Cr/Mn containing alloys both spin channels experience strong disorder scattering due to an electron filling effect. Somewhat surprisingly, other scattering mechanisms—including displacement, or size effect, scattering which has been shown to strongly correlate with such diverse properties as yield strength—are found to be relatively weak in most cases.

36 MATERIALS SCIENCE↗

Neutron study of the short range order inversion in Fe{sub 1-x}Cr{sub x}

We have performed different neutron diffuse scattering measurements in Fe{sub 1-x}Cr{sub x} solid solutions, in a concentration range 0<x<0.15, where the atomic distribution shows an inversion of the short range order. By optimizing the signal-background ratio with respect to a previous study, we obtain an accurate determination of the concentration of inversion x{sub 0}=0.110(5). We determine the near-neighbor atomic short range order parameters and pair potentials, which change sign at x{sub 0}. The experimental results are compared with previous first-principles calculations and atomistic simulations.

36 MATERIALS SCIENCE↗

Consequence Based Framework for Deployment of Cloud Solutions in the Digital Energy Transition

This study proposes a framework for evaluating cloud computing deployment in the electric sector, focusing on the digital transition of energy systems. It assesses the implications of cloud technology adoption, particularly in terms of security, operational resilience, and efficiency. The paper introduces a method for consequence-driven risk analysis, enabling utilities to prioritize and mitigate potential threats effectively. It also discusses the shared responsibility model in cloud computing, highlighting the need for collaborative security efforts. The research aims to provide utilities with a strategic assessment tool for cloud adoption, emphasizing the importance of security culture in enhancing cloud computing's role in critical infrastructure.

99 GENERAL AND MISCELLANEOUS↗

Analytical description of charged particle transport along arbitrary guiding-field configurations

Focused particle transport is analyzed in terms of partial differential equations which are applicable to arbitrary spatial variations of the mean free path and the focusing length. A distribution function for transport is written in two forms of the Boltzmann equation and a coefficient of spatial diffusion is defined. Changes from a nearly coherent propagation of flare particles in regions of strong focusing near the sun to ordinary diffusion in the outer solar system are described as supercoherent transitions. A solution to the steady state problem is developed and results are presented for a monopolar guiding field configuration with isotropic diffusion gradually giving way to anisotropy in a region suggestive of a collimated beam of particles streaming away from its source.

Earl, J. A.↗